From: Andrew Morton <akpm@linux-foundation.org>
To: Zsolt Barat <zsolt@softmonsters.com>
Cc: lkml <linux-kernel@vger.kernel.org>, linux-ide@vger.kernel.org
Subject: Re: ATA bus error with external hd on esata
Date: Mon, 17 Dec 2007 02:53:21 -0800 [thread overview]
Message-ID: <20071217025321.2f7507db.akpm@linux-foundation.org> (raw)
In-Reply-To: <476434C7.6040307@softmonsters.com>
On Sat, 15 Dec 2007 21:10:47 +0100 Zsolt Barat <zsolt@softmonsters.com> wrote:
> Zsolt Barat schrieb:
> > hi list,
Let's cc the IDE development list.
> > i just bought a "MyBook" called external HD with a fixed enclosure, from
> > WD. Connected to the SATA port i constantly get "ATA bus error" messages
> > in the kernel log. Is this a known issue?
> >
> > /var/log/messages:
> > Dec 15 18:37:53 proto1 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0
> > action 0x2
> > Dec 15 18:37:53 proto1 ata2.00: irq_stat 0x40000001
> > Dec 15 18:37:53 proto1 ata2.00: cmd 35/00:e0:a7:d2:01/00:01:33:00:00/e0
> > tag 0 cdb 0x0 data 245760 out
> > Dec 15 18:37:53 proto1 res 51/84:00:86:d4:01/00:00:33:00:00/e0 Emask
> > 0x10 (ATA bus error)
> > Dec 15 18:37:54 proto1 ata2: soft resetting port
> > Dec 15 18:37:54 proto1 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl
> > 310)
> > Dec 15 18:37:54 proto1 ata2.00: configured for UDMA/33
> > Dec 15 18:37:54 proto1 ata2: EH complete
> > Dec 15 18:37:54 proto1 sd 1:0:0:0: [sdb] 976773168 512-byte hardware
> > sectors (500108 MB)
> > Dec 15 18:37:54 proto1 sd 1:0:0:0: [sdb] Write Protect is off
> > Dec 15 18:37:54 proto1 sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> > Dec 15 18:37:54 proto1 sd 1:0:0:0: [sdb] Write cache: enabled, read
> > cache: enabled, doesn't support DPO or FUA
> > Dec 15 18:38:15 proto1 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0
> > action 0x2
> > Dec 15 18:38:15 proto1 ata2.00: irq_stat 0x40000001
> > Dec 15 18:38:15 proto1 ata2.00: cmd 35/00:80:bf:09:14/00:01:33:00:00/e0
> > tag 0 cdb 0x0 data 196608 out
> > Dec 15 18:38:15 proto1 res 51/84:00:3e:0b:14/00:00:33:00:00/e0 Emask
> > 0x10 (ATA bus error)
> > Dec 15 18:38:15 proto1 ata2: soft resetting port
> > Dec 15 18:38:15 proto1 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl
> > 310)
> > Dec 15 18:38:15 proto1 ata2.00: configured for UDMA/33
> > Dec 15 18:38:15 proto1 ata2: EH complete
> > Dec 15 18:38:15 proto1 sd 1:0:0:0: [sdb] 976773168 512-byte hardware
> > sectors (500108 MB)
> > Dec 15 18:38:15 proto1 sd 1:0:0:0: [sdb] Write Protect is off
> > Dec 15 18:38:15 proto1 sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> > Dec 15 18:38:15 proto1 sd 1:0:0:0: [sdb] Write cache: enabled, read
> > cache: enabled, doesn't support DPO or FUA
> >
> > lspci:
> > 00:00.0 Host bridge: ATI Technologies Inc Unknown device 7910
> > 00:01.0 PCI bridge: ATI Technologies Inc Unknown device 7912
> > 00:07.0 PCI bridge: ATI Technologies Inc Unknown device 7917
> > 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
> > 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
> > 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
> > 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
> > 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
> > 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
> > 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
> > 00:14.0 SMBus: ATI Technologies Inc SB600 SMBus (rev 13)
> > 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
> > 00:14.2 Audio device: ATI Technologies Inc SB600 Azalia
> > 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
> > 00:14.4 PCI bridge: ATI Technologies Inc SB600 PCI to PCI Bridge
> > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> > HyperTransport Technology Configuration
> > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> > Address Map
> > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> > DRAM Controller
> > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> > Miscellaneous Control
> > 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon X1200 Series
> > 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio
> > Controller
> > 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> > RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
> > 03:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
> > Controller (rev c0)
> >
> > thanks and best regards
> >
> > zsolt
> >
> sorry, kernel version is: 2.6.23-gentoo-r1
>
next parent reply other threads:[~2007-12-17 10:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <47642D9A.4080600@softmonsters.com>
[not found] ` <476434C7.6040307@softmonsters.com>
2007-12-17 10:53 ` Andrew Morton [this message]
2007-12-17 17:09 ` ATA bus error with external hd on esata Greg Freemyer
2007-12-17 17:26 ` Jean-Louis Dupond
2007-12-18 13:12 ` Zsolt Barat
[not found] ` <4766B100.3010203@dupondje.be>
2007-12-18 13:14 ` Zsolt Barat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071217025321.2f7507db.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=zsolt@softmonsters.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).