linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/9] piix: remove stale comments
Date: Thu, 27 Dec 2007 20:12:00 +0100	[thread overview]
Message-ID: <20071227191200.1357.71766.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20071227191153.1357.63211.sendpatchset@localhost.localdomain>


Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/piix.c |   47 +----------------------------------------------
 1 file changed, 1 insertion(+), 46 deletions(-)

Index: b/drivers/ide/pci/piix.c
===================================================================
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -8,53 +8,8 @@
  *
  *  May be copied or modified under the terms of the GNU General Public License
  *
- *  PIO mode setting function for Intel chipsets.
- *  For use instead of BIOS settings.
+ * Documentation:
  *
- * 40-41
- * 42-43
- * 
- *                 41
- *                 43
- *
- * | PIO 0       | c0 | 80 | 0 |
- * | PIO 2 | SW2 | d0 | 90 | 4 |
- * | PIO 3 | MW1 | e1 | a1 | 9 |
- * | PIO 4 | MW2 | e3 | a3 | b |
- *
- * sitre = word40 & 0x4000; primary
- * sitre = word42 & 0x4000; secondary
- *
- * 44 8421|8421    hdd|hdb
- *
- * 48 8421         hdd|hdc|hdb|hda udma enabled
- *
- *    0001         hda
- *    0010         hdb
- *    0100         hdc
- *    1000         hdd
- *
- * 4a 84|21        hdb|hda
- * 4b 84|21        hdd|hdc
- *
- *    ata-33/82371AB
- *    ata-33/82371EB
- *    ata-33/82801AB            ata-66/82801AA
- *    00|00 udma 0              00|00 reserved
- *    01|01 udma 1              01|01 udma 3
- *    10|10 udma 2              10|10 udma 4
- *    11|11 reserved            11|11 reserved
- *
- * 54 8421|8421    ata66 drive|ata66 enable
- *
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x40, &reg40);
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x42, &reg42);
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x44, &reg44);
- * pci_read_config_byte(HWIF(drive)->pci_dev, 0x48, &reg48);
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x4a, &reg4a);
- * pci_read_config_byte(HWIF(drive)->pci_dev, 0x54, &reg54);
- *
- * Documentation
  *	Publically available from Intel web site. Errata documentation
  * is also publically available. As an aide to anyone hacking on this
  * driver the list of errata that are relevant is below.going back to

  reply	other threads:[~2007-12-27 19:01 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-12-27 19:11 [PATCH 0/9] ide: switch to generic DMA-mapping API Bartlomiej Zolnierkiewicz
2007-12-27 19:12 ` Bartlomiej Zolnierkiewicz [this message]
2007-12-28 12:02   ` [PATCH 1/9] piix: remove stale comments Sergei Shtylyov
2007-12-30 17:09     ` Bartlomiej Zolnierkiewicz
2007-12-27 19:12 ` [PATCH 2/9] ide: fix ide_intr() for non-PCI devices and CONFIG_BLK_DEV_IDEPCI=y Bartlomiej Zolnierkiewicz
2007-12-28 12:15   ` Sergei Shtylyov
2007-12-27 19:12 ` [PATCH 3/9] ide: remove BUG_ON() from ide_build_sglist() Bartlomiej Zolnierkiewicz
2007-12-27 19:12 ` [PATCH 4/9] ide: use ide_destroy_dmatable() instead of pci_unmap_sg() Bartlomiej Zolnierkiewicz
2007-12-29 13:43   ` Sergei Shtylyov
2007-12-27 19:12 ` [PATCH 5/9] ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_t Bartlomiej Zolnierkiewicz
2007-12-27 19:12 ` [PATCH 6/9] au1xxx-ide: use hwif->dev Bartlomiej Zolnierkiewicz
2007-12-27 19:12 ` [PATCH 7/9] icside: " Bartlomiej Zolnierkiewicz
2007-12-28 13:24   ` Sergei Shtylyov
2007-12-29 13:52   ` Sergei Shtylyov
2007-12-29 13:55     ` Sergei Shtylyov
2007-12-27 19:12 ` [PATCH 8/9] ide: switch to DMA-mapping API Bartlomiej Zolnierkiewicz
2008-01-02  8:34   ` Bryan Wu
2007-12-27 19:12 ` [PATCH 9/9] ide: use ide_build_sglist() and ide_destroy_dmatable() in non-PCI host drivers Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20071227191200.1357.71766.sendpatchset@localhost.localdomain \
    --to=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).