From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Vitaly Bordug <vitb@kernel.crashing.org>
Subject: [PATCH 1/2] ide-mpc8xx: make m8xx_ide_init_ports() return an error value
Date: Wed, 20 Feb 2008 01:48:26 +0100 [thread overview]
Message-ID: <200802200148.26395.bzolnier@gmail.com> (raw)
* Make m8xx_ide_init_ports() return an error value.
* Update mpc8xx_ide_probe() to setup/probe only ports for which
m8xx_ide_init_ports() succedded.
Cc: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ppc/mpc8xx.c | 40 +++++++++++++++++++++++++---------------
1 file changed, 25 insertions(+), 15 deletions(-)
Index: b/drivers/ide/ppc/mpc8xx.c
===================================================================
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -127,7 +127,7 @@ static int pcmcia_schlvl = PCMCIA_SCHLVL
* MPC8xx's internal PCMCIA interface
*/
#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
-static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
+static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
{
unsigned long *p = hw->io_ports;
int i;
@@ -236,7 +236,7 @@ static void __init m8xx_ide_init_ports(h
if (pcmp->pcmc_pipr & (M8XX_PCMCIA_CD1(_slot_)|M8XX_PCMCIA_CD2(_slot_))) {
printk ("No card in slot %c: PIPR=%08x\n",
'A' + _slot_, (u32) pcmp->pcmc_pipr);
- return; /* No card in slot */
+ return -ENODEV; /* No card in slot */
}
check_ide_device (pcmcia_base);
@@ -279,9 +279,6 @@ static void __init m8xx_ide_init_ports(h
}
#endif /* CONFIG_IDE_8xx_PCCARD */
- ide_hwifs[data_port].pio_mask = ATA_PIO4;
- ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode;
-
/* Enable Harddisk Interrupt,
* and make it edge sensitive
*/
@@ -296,6 +293,8 @@ static void __init m8xx_ide_init_ports(h
/* Enable falling edge irq */
pcmp->pcmc_per = 0x100000 >> (16 * _slot_);
#endif /* CONFIG_IDE_8xx_PCCARD */
+
+ return 0;
}
#endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */
@@ -304,7 +303,7 @@ static void __init m8xx_ide_init_ports(h
* MPC8xx's internal PCMCIA interface
*/
#if defined(CONFIG_IDE_EXT_DIRECT)
-static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
+static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
{
unsigned long *p = hw->io_ports;
int i;
@@ -357,15 +356,14 @@ static void __init m8xx_ide_init_ports(h
hw->irq = ioport_dsc[data_port].irq;
hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack;
- ide_hwifs[data_port].pio_mask = ATA_PIO4;
- ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode;
-
/* Enable Harddisk Interrupt,
* and make it edge sensitive
*/
/* (11-18) Set edge detect for irq, no wakeup from low power mode */
((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |=
(0x80000000 >> ioport_dsc[data_port].irq);
+
+ return 0;
}
#endif /* CONFIG_IDE_8xx_DIRECT */
@@ -794,14 +792,26 @@ static int __init mpc8xx_ide_probe(void)
#ifdef IDE0_BASE_OFFSET
memset(&hw, 0, sizeof(hw));
- m8xx_ide_init_ports(&hw, 0);
- ide_init_port_hw(&ide_hwifs[0], &hw);
- idx[0] = 0;
+ if (!m8xx_ide_init_ports(&hw, 0)) {
+ ide_hwif_t *hwif = &ide_hwifs[0];
+
+ ide_init_port_hw(hwif, &hw);
+ hwif->pio_mask = ATA_PIO4;
+ hwif->set_pio_mode = m8xx_ide_set_pio_mode;
+
+ idx[0] = 0;
+ }
#ifdef IDE1_BASE_OFFSET
memset(&hw, 0, sizeof(hw));
- m8xx_ide_init_ports(&hw, 1);
- ide_init_port_hw(&ide_hwifs[1], &hw);
- idx[1] = 1;
+ if (!m8xx_ide_init_ports(&hw, 1)) {
+ ide_hwif_t *mate = &ide_hwifs[1];
+
+ ide_init_port_hw(mate, &hw);
+ mate->pio_mask = ATA_PIO4;
+ mate->set_pio_mode = m8xx_ide_set_pio_mode;
+
+ idx[1] = 1;
+ }
#endif
#endif
reply other threads:[~2008-02-20 0:36 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200802200148.26395.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vitb@kernel.crashing.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).