From: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
To: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>,
linux-ide <linux-ide@vger.kernel.org>
Subject: [PATCH 1/6] IDE: Coding Style fixes to drivers/ide/pci/opti621.c
Date: Sat, 23 Feb 2008 18:38:19 +0100 [thread overview]
Message-ID: <20080223183819.0f431e3b@paolo-desktop> (raw)
Compile tested.
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
---
drivers/ide/pci/opti621.c | 50 ++++++++++++++++++++++----------------------
1 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index cfd46ae..3df74b7 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -57,9 +57,9 @@
* (use idebus=xx to select PCI bus speed).
*
* Version 0.1, Nov 8, 1996
- * by Jaromir Koutek, for 2.1.8.
+ * by Jaromir Koutek, for 2.1.8.
* Initial version of driver.
- *
+ *
* Version 0.2
* Number 0.2 skipped.
*
@@ -75,7 +75,7 @@
* by Jaromir Koutek
* Updates for use with (again) new IDE block driver.
* Update of documentation.
- *
+ *
* Version 0.6, Jan 2, 1999
* by Jaromir Koutek
* Reversed to version 0.3 of the driver, because
@@ -208,29 +208,29 @@ typedef struct pio_clocks_s {
static void compute_clocks(int pio, pio_clocks_t *clks)
{
- if (pio != PIO_NOT_EXIST) {
- int adr_setup, data_pls;
+ if (pio != PIO_NOT_EXIST) {
+ int adr_setup, data_pls;
int bus_speed = system_bus_clock();
- adr_setup = ide_pio_timings[pio].setup_time;
- data_pls = ide_pio_timings[pio].active_time;
- clks->address_time = cmpt_clk(adr_setup, bus_speed);
- clks->data_time = cmpt_clk(data_pls, bus_speed);
- clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time
- - adr_setup-data_pls, bus_speed);
- if (clks->address_time<1) clks->address_time = 1;
- if (clks->address_time>4) clks->address_time = 4;
- if (clks->data_time<1) clks->data_time = 1;
- if (clks->data_time>16) clks->data_time = 16;
- if (clks->recovery_time<2) clks->recovery_time = 2;
- if (clks->recovery_time>17) clks->recovery_time = 17;
+ adr_setup = ide_pio_timings[pio].setup_time;
+ data_pls = ide_pio_timings[pio].active_time;
+ clks->address_time = cmpt_clk(adr_setup, bus_speed);
+ clks->data_time = cmpt_clk(data_pls, bus_speed);
+ clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time
+ - adr_setup-data_pls, bus_speed);
+ if (clks->address_time < 1) clks->address_time = 1;
+ if (clks->address_time > 4) clks->address_time = 4;
+ if (clks->data_time < 1) clks->data_time = 1;
+ if (clks->data_time > 16) clks->data_time = 16;
+ if (clks->recovery_time < 2) clks->recovery_time = 2;
+ if (clks->recovery_time > 17) clks->recovery_time = 17;
} else {
clks->address_time = 1;
clks->data_time = 1;
clks->recovery_time = 2;
/* minimal values */
}
-
+
}
static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
@@ -247,8 +247,8 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
/* sets drive->drive_data for both drives */
compute_pios(drive, pio);
- pio1 = hwif->drives[0].drive_data;
- pio2 = hwif->drives[1].drive_data;
+ pio1 = hwif->drives[0].drive_data;
+ pio2 = hwif->drives[1].drive_data;
compute_clocks(pio1, &first);
compute_clocks(pio2, &second);
@@ -275,7 +275,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
spin_lock_irqsave(&opti621_lock, flags);
- reg_base = hwif->io_ports[IDE_DATA_OFFSET];
+ reg_base = hwif->io_ports[IDE_DATA_OFFSET];
/* allow Register-B */
outb(0xc0, reg_base + CNTRL_REG);
@@ -324,7 +324,7 @@ static void __devinit opti621_port_init_devs(ide_hwif_t *hwif)
/*
* init_hwif_opti621() is called once for each hwif found at boot.
*/
-static void __devinit init_hwif_opti621 (ide_hwif_t *hwif)
+static void __devinit init_hwif_opti621(ide_hwif_t *hwif)
{
hwif->port_init_devs = opti621_port_init_devs;
hwif->set_pio_mode = &opti621_set_pio_mode;
@@ -334,15 +334,15 @@ static const struct ide_port_info opti621_chipsets[] __devinitdata = {
{ /* 0 */
.name = "OPTI621",
.init_hwif = init_hwif_opti621,
- .enablebits = {{0x45,0x80,0x00}, {0x40,0x08,0x00}},
+ .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
.pio_mask = ATA_PIO3,
.swdma_mask = ATA_SWDMA2,
.mwdma_mask = ATA_MWDMA2,
- },{ /* 1 */
+ }, { /* 1 */
.name = "OPTI621X",
.init_hwif = init_hwif_opti621,
- .enablebits = {{0x45,0x80,0x00}, {0x40,0x08,0x00}},
+ .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
.pio_mask = ATA_PIO3,
.swdma_mask = ATA_SWDMA2,
--
1.5.4.2.316.gf7a7
reply other threads:[~2008-02-23 17:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080223183819.0f431e3b@paolo-desktop \
--to=paolo.ciarrocchi@gmail.com \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox