From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 2/4] sis5513: fail early for unsupported chipsets
Date: Sat, 23 Feb 2008 21:14:23 +0100 [thread overview]
Message-ID: <200802232114.23726.bzolnier@gmail.com> (raw)
* Factor out chipset family detection from init_chipset_sis5513()
to sis_find_family().
* Use sis_find_family() in sis5513_init_one() to fail early if the
chipset is unsupported.
* Keep a local copy sis5513_chipset in sis5513_init_one()
and set .udma_mask according to chipset family.
* Remove no longer need ->ultra_mask setting from init_hwif_sis5513().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/pci/sis5513.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
Index: b/drivers/ide/pci/sis5513.c
===================================================================
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -358,8 +358,7 @@ static u8 sis5513_ata133_udma_filter(ide
return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5;
}
-/* Chip detection and general config */
-static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const char *name)
+static int __devinit sis_find_family(struct pci_dev *dev)
{
struct pci_dev *host;
int i = 0;
@@ -440,9 +439,12 @@ static unsigned int __devinit init_chips
}
}
- if (!chipset_family)
- return -1;
+ return chipset_family;
+}
+static unsigned int __devinit init_chipset_sis5513(struct pci_dev *dev,
+ const char *name)
+{
/* Make general config ops here
1/ tell IDE channels to operate in Compatibility mode only
2/ tell old chips to allow per drive IDE timings */
@@ -548,8 +550,6 @@ static u8 __devinit ata66_sis5513(ide_hw
static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
{
- u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
-
hwif->set_pio_mode = &sis_set_pio_mode;
hwif->set_dma_mode = &sis_set_dma_mode;
@@ -557,11 +557,6 @@ static void __devinit init_hwif_sis5513
hwif->udma_filter = sis5513_ata133_udma_filter;
hwif->cable_detect = ata66_sis5513;
-
- if (hwif->dma_base == 0)
- return;
-
- hwif->ultra_mask = udma_rates[chipset_family];
}
static const struct ide_port_info sis5513_chipset __devinitdata = {
@@ -576,7 +571,15 @@ static const struct ide_port_info sis551
static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- return ide_setup_pci_device(dev, &sis5513_chipset);
+ struct ide_port_info d = sis5513_chipset;
+ u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
+
+ if (sis_find_family(dev) == 0)
+ return -ENOTSUPP;
+
+ d.udma_mask = udma_rates[chipset_family];
+
+ return ide_setup_pci_device(dev, &d);
}
static const struct pci_device_id sis5513_pci_tbl[] = {
reply other threads:[~2008-02-23 20:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200802232114.23726.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).