From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] ide: remove obsoleted "idex=noprobe" kernel parameter (take 2)
Date: Tue, 11 Mar 2008 21:25:22 +0100 [thread overview]
Message-ID: <200803112125.22982.bzolnier@gmail.com> (raw)
* Remove obsoleted "idex=noprobe" kernel parameter.
* Remove no longer needed hwif->noprobe quirk from ide_hwif_configure()
and hwif->noprobe checking from cmd640.c.
v2:
* "ide?=noprobe" -> "ide?=ata66" in Documentation/kernel-parameters.txt.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
replacement patch
Documentation/kernel-parameters.txt | 2 +-
drivers/ide/ide.c | 6 ++----
drivers/ide/pci/cmd640.c | 3 +--
drivers/ide/setup-pci.c | 7 -------
4 files changed, 4 insertions(+), 14 deletions(-)
Index: b/Documentation/kernel-parameters.txt
===================================================================
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -769,7 +769,7 @@ and is between 256 and 4096 characters.
See Documentation/ide/ide.txt.
ide?= [HW] (E)IDE subsystem
- Format: ide?=noprobe or chipset specific parameters.
+ Format: ide?=ata66 or chipset specific parameters.
See Documentation/ide/ide.txt.
idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
Index: b/drivers/ide/ide.c
===================================================================
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1141,7 +1141,7 @@ static int __init ide_setup(char *s)
* (-8, -9, -10) are reserved to ease the hardcoding.
*/
static const char *ide_words[] = {
- "noprobe", "serialize", "minus3", "minus4",
+ "minus1", "serialize", "minus3", "minus4",
"reset", "minus6", "ata66", "minus8", "minus9",
"minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
"dtc2278", "umc8672", "ali14xx", NULL };
@@ -1233,9 +1233,7 @@ static int __init ide_setup(char *s)
hwif->serialized = hwif->mate->serialized = 1;
goto obsolete_option;
- case -1: /* "noprobe" */
- hwif->noprobe = 1;
- goto obsolete_option;
+ case -1:
case 0:
case 1:
case 2:
Index: b/drivers/ide/pci/cmd640.c
===================================================================
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -789,8 +789,7 @@ static int __init cmd640x_init(void)
/*
* Try to enable the secondary interface, if not already enabled
*/
- if (cmd_hwif1->noprobe ||
- (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe)) {
+ if (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) {
port2 = "not probed";
} else {
b = get_cmd640_reg(CNTRL);
Index: b/drivers/ide/setup-pci.c
===================================================================
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -345,7 +345,6 @@ static ide_hwif_t *ide_hwif_configure(st
unsigned long ctl = 0, base = 0;
ide_hwif_t *hwif;
u8 bootable = (d->host_flags & IDE_HFLAG_BOOTABLE) ? 1 : 0;
- u8 oldnoprobe = 0;
struct hw_regs_s hw;
if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
@@ -376,14 +375,8 @@ static ide_hwif_t *ide_hwif_configure(st
hw.chipset = d->chipset ? d->chipset : ide_pci;
ide_std_init_ports(&hw, base, ctl | 2);
- if (hwif->io_ports[IDE_DATA_OFFSET] == base &&
- hwif->io_ports[IDE_CONTROL_OFFSET] == (ctl | 2))
- oldnoprobe = hwif->noprobe;
-
ide_init_port_hw(hwif, &hw);
- hwif->noprobe = oldnoprobe;
-
hwif->dev = &dev->dev;
hwif->cds = d;
reply other threads:[~2008-03-11 20:13 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200803112125.22982.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).