* Re: macbook pro dvd playback after suspend Buffer I/O error
[not found] <dd18b0c30804032207u36bd1f43l358e9949f0c94f79@mail.gmail.com>
@ 2008-04-04 8:21 ` Andrew Morton
2008-04-04 15:05 ` Justin Mattock
2008-06-11 2:00 ` Tejun Heo
0 siblings, 2 replies; 18+ messages in thread
From: Andrew Morton @ 2008-04-04 8:21 UTC (permalink / raw)
To: Justin Mattock; +Cc: linux-kernel, linux-ide
On Fri, 4 Apr 2008 05:07:45 +0000 "Justin Mattock" <justinmattock@gmail.com> wrote:
> When playing a DVD and then suspending the system while the DVD is
> still in play, upon wakeup I'm receiving a Buffer I/O error on device
> sr0, logical block 356490.
> the DVD will continue to play but then gmplayer complains: Warning!
> FPS changed 23.976 -> 29.970 (-5.994005) [4] then the video becomes
> very choppy. When looking at osx in the same test the DVD will be
> paused until the cd player aligns itself, then playback will start.
> With looking further at this I think this is an issue of a library or
> codec, So with this in mind is there a package that I might look at to
> see if this resolves the issue. Attached is dmesg of the Buffer I/O
> regards;
An ata thing, I assume. Let's cc linux-ide.
Is this new behaviour in 2.6.25-rc8, or were earlier kernels OK?
> [ 0.000000] Linux version 2.6.25-rc8 (root@unix) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Tue Apr 1 23:57:23 UTC 2008
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable)
> [ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data)
> [ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data)
> [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> [ 0.000000] 112MB HIGHMEM available.
> [ 0.000000] 896MB LOWMEM available.
> [ 0.000000] Scan SMP from c0000000 for 1024 bytes.
> [ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
> [ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
> [ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
> [ 0.000000] Entering add_active_range(0, 0, 258282) 0 entries of 256 used
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0 -> 4096
> [ 0.000000] Normal 4096 -> 229376
> [ 0.000000] HighMem 229376 -> 258282
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[1] active PFN ranges
> [ 0.000000] 0: 0 -> 258282
> [ 0.000000] On node 0 totalpages: 258282
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
> [ 0.000000] Normal zone: 1760 pages used for memmap
> [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 225 pages used for memmap
> [ 0.000000] HighMem zone: 28681 pages, LIFO batch:7
> [ 0.000000] Movable zone: 0 pages used for memmap
> [ 0.000000] DMI 2.4 present.
> [ 0.000000] Using APIC driver default
> [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
> [ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
> [ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
> [ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309)
> [ 0.000000] ACPI: FACS 3FEC0000, 0040
> [ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
> [ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
> [ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
> [ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
> [ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
> [ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
> [ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
> [ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
> [ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
> [ 0.000000] ACPI: DMI detected: Apple
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] Processor #0 6:15 APIC version 20
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] Processor #1 6:15 APIC version 20
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
> [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256265
> [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash vga=773 selinux=1 audit=1 enforcing=1 highres=off apic=verbose acpi_osi=Linux pnpacpi=off usbcore.autosuspend=1 pci=routeirq
> [ 0.000000] audit: enabled (after initialization)
> [ 0.000000] ACPI: Added _OSI(Linux)
> [ 0.000000] mapped APIC to ffffb000 (fee00000)
> [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
> [ 0.000000] Enabling fast FPU save and restore... done.
> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
> [ 0.000000] Detected 2161.255 MHz processor.
> [ 0.003333] Console: colour dummy device 80x25
> [ 0.003333] console [tty0] enabled
> [ 0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.003333] Memory: 1019064k/1033128k available (2490k kernel code, 13416k reserved, 959k data, 332k init, 115624k highmem)
> [ 0.003333] virtual kernel memory layout:
> [ 0.003333] fixmap : 0xfff9a000 - 0xfffff000 ( 404 kB)
> [ 0.003333] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> [ 0.003333] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
> [ 0.003333] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> [ 0.003333] .init : 0xc0466000 - 0xc04b9000 ( 332 kB)
> [ 0.003333] .data : 0xc036e8c8 - 0xc045e740 ( 959 kB)
> [ 0.003333] .text : 0xc0100000 - 0xc036e8c8 (2490 kB)
> [ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated
> [ 0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
> [ 0.003333] hpet clockevent registered
> [ 0.083331] Calibrating delay using timer specific routine.. 4328.69 BogoMIPS (lpj=7210719)
> [ 0.083348] Security Framework initialized
> [ 0.083351] SELinux: Initializing.
> [ 0.083358] SELinux: Starting in enforcing mode
> [ 0.083366] selinux_register_security: Registering secondary module capability
> [ 0.083368] Capability LSM initialized as secondary
> [ 0.083377] Mount-cache hash table entries: 512
> [ 0.083484] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.083486] CPU: L2 cache: 4096K
> [ 0.083489] CPU: Physical Processor ID: 0
> [ 0.083490] CPU: Processor Core ID: 0
> [ 0.083492] Intel machine check architecture supported.
> [ 0.083495] Intel machine check reporting enabled on CPU#0.
> [ 0.083497] using mwait in idle threads.
> [ 0.083500] Compat vDSO mapped to ffffe000.
> [ 0.083505] Checking 'hlt' instruction... OK.
> [ 0.097770] ACPI: Core revision 20070126
> [ 0.105392] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
> [ 0.105398] enabled ExtINT on CPU#0
> [ 0.105407] Booting processor 1/1 ip 4000
> [ 0.003333] Initializing CPU#1
> [ 0.003333] masked ExtINT on CPU#1
> [ 0.003333] Calibrating delay using timer specific routine.. 4324.65 BogoMIPS (lpj=7204251)
> [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.003333] CPU: L2 cache: 4096K
> [ 0.003333] CPU: Physical Processor ID: 0
> [ 0.003333] CPU: Processor Core ID: 1
> [ 0.003333] Intel machine check architecture supported.
> [ 0.003333] Intel machine check reporting enabled on CPU#1.
> [ 0.197373] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
> [ 0.197387] Total of 2 processors activated (8652.35 BogoMIPS).
> [ 0.197578] ENABLING IO-APIC IRQs
> [ 0.197579] init IO_APIC IRQs
> [ 0.197581] IO-APIC (apicid-pin) 1-0 not connected.
> [ 0.197625] IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
> [ 0.197777] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.230814] Using local APIC timer interrupts.
> [ 0.230815] calibrating APIC timer ...
> [ 0.233318] ... lapic delta = 1039057
> [ 0.233318] ... PM timer delta = 357953
> [ 0.233318] ... PM timer result ok
> [ 0.233318] ..... delta 1039057
> [ 0.233318] ..... mult: 44630068
> [ 0.233318] ..... calibration result: 554163
> [ 0.233318] ..... CPU clock speed is 2161.1523 MHz.
> [ 0.233318] ..... host bus clock speed is 166.0885 MHz.
> [ 0.233318] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> [ 0.233334] Brought up 2 CPUs
> [ 0.233358] CPU0 attaching sched-domain:
> [ 0.233360] domain 0: span 3
> [ 0.233362] groups: 1 2
> [ 0.233365] CPU1 attaching sched-domain:
> [ 0.233366] domain 0: span 3
> [ 0.233368] groups: 2 1
> [ 0.233604] net_namespace: 452 bytes
> [ 0.233613] Booting paravirtualized kernel on bare hardware
> [ 0.233781] NET: Registered protocol family 16
> [ 0.233952] No dock devices found.
> [ 0.234059] EISA bus registered
> [ 0.234063] ACPI: bus type pci registered
> [ 0.234139] PCI: Using configuration type 1
> [ 0.234141] Setting up standard PCI resources
> [ 0.236136] ACPI: EC: EC description table is found, configuring boot EC
> [ 0.236316] ACPI: EC: non-query interrupt received, switching to interrupt mode
> [ 0.239148] ACPI: BIOS _OSI(Linux) query honored via cmdline
> [ 0.239488] ACPI: Interpreter enabled
> [ 0.239491] ACPI: (supports S0 S3 S4 S5)
> [ 0.239502] ACPI: Using IOAPIC for interrupt routing
> [ 0.252698] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
> [ 0.252700] ACPI: EC: driver started in poll mode
> [ 0.254869] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.255644] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
> [ 0.255649] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
> [ 0.256495] PCI: Transparent bridge - 0000:00:1e.0
> [ 0.256539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.256853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
> [ 0.256970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> [ 0.257083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> [ 0.257195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> [ 0.257315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> [ 0.263253] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> [ 0.263349] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> [ 0.263435] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> [ 0.263528] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> [ 0.263615] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
> [ 0.263700] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> [ 0.263785] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
> [ 0.263870] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
> [ 0.264244] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 0.264276] pnp: PnP ACPI: disabled
> [ 0.264463] SCSI subsystem initialized
> [ 0.264521] libata version 3.00 loaded.
> [ 0.264627] usbcore: registered new interface driver usbfs
> [ 0.264685] usbcore: registered new interface driver hub
> [ 0.264739] usbcore: registered new device driver usb
> [ 0.264994] PCI: Using ACPI for IRQ routing
> [ 0.264997] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
> [ 0.265001] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
> [ 0.265004] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
> [ 0.265007] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
> [ 0.265011] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
> [ 0.265013] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
> [ 0.265016] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
> [ 0.265019] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
> [ 0.265023] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
> [ 0.265025] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> [ 0.265028] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
> [ 0.265031] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
> [ 0.265033] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
> [ 0.265036] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
> [ 0.265039] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
> [ 0.265041] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> [ 0.265044] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> [ 0.265047] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> [ 0.265049] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
> [ 0.265052] number of MP IRQ sources: 15.
> [ 0.265053] number of IO-APIC #1 registers: 24.
> [ 0.265055] testing the IO APIC.......................
> [ 0.265063] IO APIC #1......
> [ 0.265064] .... register #00: 00000000
> [ 0.265066] ....... : physical APIC id: 00
> [ 0.265067] ....... : Delivery Type: 0
> [ 0.265068] ....... : LTS : 0
> [ 0.265069] .... register #01: 00170020
> [ 0.265071] ....... : max redirection entries: 0017
> [ 0.265072] ....... : PRQ implemented: 0
> [ 0.265074] ....... : IO APIC version: 0020
> [ 0.265075] .... IRQ redirection table:
> [ 0.265076] NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> [ 0.265081] 00 000 00 1 0 0 0 0 0 0 00
> [ 0.265087] 01 003 03 0 0 0 0 0 1 1 39
> [ 0.265093] 02 003 03 0 0 0 0 0 1 1 31
> [ 0.265099] 03 003 03 0 0 0 0 0 1 1 41
> [ 0.265105] 04 003 03 0 0 0 0 0 1 1 49
> [ 0.265110] 05 003 03 0 0 0 0 0 1 1 51
> [ 0.265116] 06 003 03 0 0 0 0 0 1 1 59
> [ 0.265122] 07 003 03 0 0 0 0 0 1 1 61
> [ 0.265127] 08 003 03 0 0 0 0 0 1 1 69
> [ 0.265133] 09 003 03 0 1 0 0 0 1 1 71
> [ 0.265139] 0a 003 03 0 0 0 0 0 1 1 79
> [ 0.265144] 0b 003 03 0 0 0 0 0 1 1 81
> [ 0.265150] 0c 003 03 0 0 0 0 0 1 1 89
> [ 0.265156] 0d 003 03 0 0 0 0 0 1 1 91
> [ 0.265161] 0e 003 03 0 0 0 0 0 1 1 99
> [ 0.265167] 0f 003 03 0 0 0 0 0 1 1 A1
> [ 0.265173] 10 003 03 1 1 0 1 0 1 1 A9
> [ 0.265179] 11 003 03 1 1 0 1 0 1 1 B9
> [ 0.265184] 12 003 03 1 1 0 1 0 1 1 C1
> [ 0.265190] 13 003 03 1 1 0 1 0 1 1 D1
> [ 0.265196] 14 000 00 1 0 0 0 0 0 0 00
> [ 0.265202] 15 000 00 1 0 0 0 0 0 0 00
> [ 0.265207] 16 003 03 1 1 0 1 0 1 1 B1
> [ 0.265213] 17 003 03 1 1 0 1 0 1 1 C9
> [ 0.265215] IRQ to pin mappings:
> [ 0.265217] IRQ0 -> 0:2
> [ 0.265218] IRQ1 -> 0:1
> [ 0.265220] IRQ3 -> 0:3
> [ 0.265222] IRQ4 -> 0:4
> [ 0.265223] IRQ5 -> 0:5
> [ 0.265225] IRQ6 -> 0:6
> [ 0.265226] IRQ7 -> 0:7
> [ 0.265228] IRQ8 -> 0:8
> [ 0.265230] IRQ9 -> 0:9
> [ 0.265231] IRQ10 -> 0:10
> [ 0.265233] IRQ11 -> 0:11
> [ 0.265235] IRQ12 -> 0:12
> [ 0.265236] IRQ13 -> 0:13
> [ 0.265238] IRQ14 -> 0:14
> [ 0.265239] IRQ15 -> 0:15
> [ 0.265241] IRQ16 -> 0:16
> [ 0.265243] IRQ17 -> 0:17
> [ 0.265244] IRQ18 -> 0:18
> [ 0.265246] IRQ19 -> 0:19
> [ 0.265247] IRQ22 -> 0:22
> [ 0.265249] IRQ23 -> 0:23
> [ 0.265251] .................................... done.
> [ 0.269996] NetLabel: Initializing
> [ 0.269997] NetLabel: domain hash size = 128
> [ 0.269999] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.270011] NetLabel: unlabeled traffic allowed by default
> [ 0.270021] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11
> [ 0.270025] hpet0: 3 64-bit timers, 14318180 Hz
> [ 0.307160] PCI: Bridge: 0000:00:01.0
> [ 0.307162] IO window: 3000-3fff
> [ 0.307166] MEM window: 0x50300000-0x503fffff
> [ 0.307169] PREFETCH window: 0x0000000040000000-0x0000000047ffffff
> [ 0.307173] PCI: Bridge: 0000:00:1c.0
> [ 0.307176] IO window: 2000-2fff
> [ 0.307181] MEM window: 0x50200000-0x502fffff
> [ 0.307186] PREFETCH window: 0x0000000050500000-0x00000000505fffff
> [ 0.307193] PCI: Bridge: 0000:00:1c.1
> [ 0.307194] IO window: disabled.
> [ 0.307199] MEM window: 0x50100000-0x501fffff
> [ 0.307203] PREFETCH window: disabled.
> [ 0.307210] PCI: Bridge: 0000:00:1c.2
> [ 0.307213] IO window: 1000-1fff
> [ 0.307218] MEM window: 0x4c100000-0x500fffff
> [ 0.307222] PREFETCH window: 0x0000000048000000-0x000000004bffffff
> [ 0.307230] PCI: Bridge: 0000:00:1e.0
> [ 0.307231] IO window: disabled.
> [ 0.307236] MEM window: 0x4c000000-0x4c0fffff
> [ 0.307240] PREFETCH window: disabled.
> [ 0.307255] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
> [ 0.307260] PCI: Setting latency timer of device 0000:00:01.0 to 64
> [ 0.307281] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
> [ 0.307286] PCI: Setting latency timer of device 0000:00:1c.0 to 64
> [ 0.307308] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
> [ 0.307314] PCI: Setting latency timer of device 0000:00:1c.1 to 64
> [ 0.307336] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
> [ 0.307341] PCI: Setting latency timer of device 0000:00:1c.2 to 64
> [ 0.307354] PCI: Setting latency timer of device 0000:00:1e.0 to 64
> [ 0.307363] NET: Registered protocol family 2
> [ 0.320025] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 0.320209] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 0.320565] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.320740] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.320743] TCP reno registered
> [ 0.094028] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
> [ 0.094312] audit: initializing netlink socket (enabled)
> [ 0.094323] type=2000 audit(1207283385.326:1): initialized
> [ 0.094501] highmem bounce pool size: 64 pages
> [ 0.094505] Total HugeTLB memory allocated, 0
> [ 0.097174] fuse init (API version 7.9)
> [ 0.097442] SELinux: Registering netfilter hooks
> [ 0.097510] io scheduler noop registered
> [ 0.097563] io scheduler cfq registered (default)
> [ 0.097660] pci 0000:01:00.0: Boot video device
> [ 0.097777] vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 1536k, total 16384k
> [ 0.097779] vesafb: mode is 1024x768x8, linelength=1024, pages=18
> [ 0.097781] vesafb: protected mode interface info at c000:ad0c
> [ 0.097783] vesafb: pmi: set display start = c00cad94, set palette = c00cae50
> [ 0.097785] vesafb: scrolling: redraw
> [ 0.097787] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
> [ 0.097839] fb0: VESA VGA frame buffer device
> [ 0.097913] power_supply ADP1: uevent
> [ 0.097915] power_supply ADP1: No power supply yet
> [ 0.097946] power_supply ADP1: power_supply_changed
> [ 0.097951] ACPI: AC Adapter [ADP1] (on-line)
> [ 0.097995] power_supply ADP1: power_supply_changed_work
> [ 0.097997] power_supply ADP1: power_supply_update_gen_leds 1
> [ 0.098003] power_supply ADP1: uevent
> [ 0.098004] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
> [ 0.098009] power_supply ADP1: Static prop TYPE=Mains
> [ 0.098011] power_supply ADP1: 1 dynamic props
> [ 0.098013] power_supply ADP1: prop ONLINE=1
> [ 0.332231] ACPI: EC: non-query interrupt received, switching to interrupt mode
> [ 0.432875] power_supply BAT0: uevent
> [ 0.432877] power_supply BAT0: No power supply yet
> [ 0.432955] power_supply BAT0: power_supply_changed
> [ 0.433020] power_supply BAT0: power_supply_changed_work
> [ 0.458794] ACPI: Battery Slot [BAT0] (battery present)
> [ 0.463083] hpet_resources: 0xfed00000 is busy
> [ 0.463620] loop: module loaded
> [ 0.463645] Linux video capture interface: v2.00
> [ 0.463871] input: Macintosh mouse button emulation as /class/input/input0
> [ 0.464036] Driver 'sd' needs updating - please use bus_type methods
> [ 0.464066] Driver 'sr' needs updating - please use bus_type methods
> [ 0.464259] ata_piix 0000:00:1f.1: version 2.12
> [ 0.464267] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
> [ 0.464300] PCI: Setting latency timer of device 0000:00:1f.1 to 64
> [ 0.464373] scsi0 : ata_piix
> [ 0.464457] scsi1 : ata_piix
> [ 0.464974] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
> [ 0.464977] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
> [ 0.488663] power_supply BAT0: power_supply_update_bat_leds 4
> [ 0.488669] power_supply BAT0: uevent
> [ 0.488670] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
> [ 0.488674] power_supply BAT0: Static prop TYPE=Battery
> [ 0.488676] power_supply BAT0: 12 dynamic props
> [ 0.488678] power_supply BAT0: prop STATUS=Full
> [ 0.488681] power_supply BAT0: prop PRESENT=1
> [ 0.488683] power_supply BAT0: prop TECHNOLOGY=Unknown
> [ 0.488685] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
> [ 0.488688] power_supply BAT0: prop VOLTAGE_NOW=12453000
> [ 0.488690] power_supply BAT0: prop CURRENT_NOW=0
> [ 0.488692] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
> [ 0.488695] power_supply BAT0: prop ENERGY_FULL=53150000
> [ 0.488697] power_supply BAT0: prop ENERGY_NOW=51380000
> [ 0.488699] power_supply BAT0: prop MODEL_NAME=ASMB012
> [ 0.488701] power_supply BAT0: prop MANUFACTURER=SMPN012
> [ 0.488703] power_supply BAT0: prop SERIAL_NUMBER=
> [ 0.266661] Switched to NOHz mode on CPU #1
> [ 0.503310] Switched to NOHz mode on CPU #0
> [ 0.280565] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66
> [ 0.290514] ata1.00: configured for UDMA/66
> [ 0.509974] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5
> [ 0.513308] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> [ 0.513308] Uniform CD-ROM driver Revision: 3.20
> [ 0.513308] sr 0:0:0:0: Attached scsi CD-ROM sr0
> [ 0.513308] sr 0:0:0:0: Attached scsi generic sg0 type 5
> [ 0.513308] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
> [ 0.513308] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
> [ 0.519983] PCI: Setting latency timer of device 0000:00:1f.2 to 64
> [ 0.520029] scsi2 : ata_piix
> [ 0.520107] scsi3 : ata_piix
> [ 0.520984] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
> [ 0.520987] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
> [ 0.539973] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
> [ 0.539973] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 0.543810] ata3.01: configured for UDMA/100
> [ 0.553305] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
> [ 0.553305] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> [ 0.553305] sd 2:0:1:0: [sda] Write Protect is off
> [ 0.553305] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
> [ 0.553305] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 0.553305] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> [ 0.553305] sd 2:0:1:0: [sda] Write Protect is off
> [ 0.553305] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
> [ 0.553305] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 0.553305] sda: sda1 sda2 < sda5 >
> [ 0.553305] sd 2:0:1:0: [sda] Attached SCSI disk
> [ 0.553305] sd 2:0:1:0: Attached scsi generic sg1 type 0
> [ 0.553305] usbcore: registered new interface driver usblcd
> [ 0.553305] usbcore: registered new interface driver usbled
> [ 0.553305] PNP: No PS/2 controller found. Probing ports directly.
> [ 0.553305] i8042.c: No controller found.
> [ 0.560048] mice: PS/2 mouse device common for all mice
> [ 0.560112] applesmc: Apple MacBook Pro detected:
> [ 0.560114] applesmc: - Model with accelerometer
> [ 0.560115] applesmc: - Model with light sensors and backlight
> [ 0.560117] applesmc: - Model with 12 temperature sensors
> [ 0.560665] applesmc: device has already been initialized (0xe0, 0x00).
> [ 0.560667] applesmc: device successfully initialized.
> [ 0.560866] applesmc: 2 fans found.
> [ 0.561508] input: applesmc as /class/input/input1
> [ 0.561570] Registered led device: smc::kbd_backlight
> [ 0.561607] applesmc: driver successfully loaded.
> [ 0.561675] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
> [ 0.561677] EDAC MC: Ver: 2.1.0 Apr 1 2008
> [ 0.561874] cpuidle: using governor ladder
> [ 0.561876] cpuidle: using governor menu
> [ 0.561912] usbcore: registered new interface driver hiddev
> [ 0.561945] usbcore: registered new interface driver usbhid
> [ 0.561948] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> [ 0.561983] Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
> [ 0.561985] ALSA device list:
> [ 0.561986] No soundcards found.
> [ 0.562041] oprofile: using NMI interrupt.
> [ 0.562439] IPVS: Registered protocols (TCP, AH, ESP)
> [ 0.562452] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
> [ 0.562472] IPVS: ipvs loaded.
> [ 0.562473] Initializing XFRM netlink socket
> [ 0.562485] NET: Registered protocol family 1
> [ 0.562493] NET: Registered protocol family 17
> [ 0.562497] NET: Registered protocol family 15
> [ 0.562504] Starting balanced_irq
> [ 0.562530] Using IPI No-Shortcut mode
> [ 0.343320] kjournald starting. Commit interval 5 seconds
> [ 0.563305] EXT3-fs: mounted filesystem with ordered data mode.
> [ 0.563305] VFS: Mounted root (ext3 filesystem) readonly.
> [ 0.563305] Freeing unused kernel memory: 332k freed
> [ 0.717700] SELinux:8192 avtab hash slots allocated. Num of rules:203526
> [ 0.748552] SELinux:8192 avtab hash slots allocated. Num of rules:203526
> [ 0.780144] security: 7 users, 7 roles, 2631 types, 89 bools
> [ 0.780147] security: 69 classes, 203526 rules
> [ 0.781474] SELinux: Completing initialization.
> [ 0.781476] SELinux: Setting up existing superblocks.
> [ 0.783291] SELinux: initialized (dev sda1, type ext3), uses xattr
> [ 0.783291] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> [ 0.783291] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> [ 0.783291] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> [ 0.783291] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
> [ 0.783291] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> [ 0.783291] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
> [ 0.783291] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 0.783291] SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
> [ 0.783291] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
> [ 0.783291] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> [ 0.783291] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> [ 0.783291] SELinux: initialized (dev proc, type proc), uses genfs_contexts
> [ 0.783291] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> [ 0.783291] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> [ 0.783291] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> [ 0.783606] SELinux: policy loaded with handle_unknown=deny
> [ 0.783613] type=1403 audit(1207283387.446:2): policy loaded auid=4294967295 ses=4294967295
> [ 0.956623] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 0.707038] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 0.958218] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 1.048272] power_supply ADP1: uevent
> [ 1.048275] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
> [ 1.048279] power_supply ADP1: Static prop TYPE=Mains
> [ 1.048281] power_supply ADP1: 1 dynamic props
> [ 1.048283] power_supply ADP1: prop ONLINE=1
> [ 1.048299] power_supply BAT0: uevent
> [ 1.048300] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
> [ 1.048303] power_supply BAT0: Static prop TYPE=Battery
> [ 1.048305] power_supply BAT0: 12 dynamic props
> [ 1.748730] power_supply BAT0: prop STATUS=Full
> [ 1.748735] power_supply BAT0: prop PRESENT=1
> [ 1.748738] power_supply BAT0: prop TECHNOLOGY=Unknown
> [ 1.748741] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
> [ 1.748743] power_supply BAT0: prop VOLTAGE_NOW=12452000
> [ 1.748746] power_supply BAT0: prop CURRENT_NOW=0
> [ 1.748748] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
> [ 1.748750] power_supply BAT0: prop ENERGY_FULL=53150000
> [ 1.748753] power_supply BAT0: prop ENERGY_NOW=51380000
> [ 1.748755] power_supply BAT0: prop MODEL_NAME=ASMB012
> [ 1.748758] power_supply BAT0: prop MANUFACTURER=SMPN012
> [ 1.748760] power_supply BAT0: prop SERIAL_NUMBER=
> [ 2.259246] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309)
> [ 2.259524] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
> [ 2.961917] Monitor-Mwait will be used to enter C-1 state
> [ 2.961921] Monitor-Mwait will be used to enter C-2 state
> [ 2.961923] Monitor-Mwait will be used to enter C-3 state
> [ 2.961985] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> [ 2.962013] ACPI: ACPI0007:00 is registered as cooling_device0
> [ 2.962018] ACPI: Processor [CPU0] (supports 8 throttling states)
> [ 2.962360] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
> [ 2.962570] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
> [ 2.283458] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> [ 2.283478] ACPI: ACPI0007:01 is registered as cooling_device1
> [ 2.283482] ACPI: Processor [CPU1] (supports 8 throttling states)
> [ 2.978015] input: Power Button (FF) as /class/input/input2
> [ 3.003200] ACPI: Power Button (FF) [PWRF]
> [ 3.003267] input: Lid Switch as /class/input/input3
> [ 3.003326] ACPI: Lid Switch [LID0]
> [ 3.003373] input: Power Button (CM) as /class/input/input4
> [ 3.042126] ACPI: Power Button (CM) [PWRB]
> [ 3.042198] input: Sleep Button (CM) as /class/input/input5
> [ 3.056493] ACPI: Sleep Button (CM) [SLPB]
> [ 3.230052] Linux agpgart interface v0.103
> [ 3.307976] USB Universal Host Controller Interface driver v3.0
> [ 3.308018] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
> [ 3.308029] PCI: Setting latency timer of device 0000:00:1d.0 to 64
> [ 3.308032] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 3.308220] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> [ 3.308316] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> [ 3.308351] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
> [ 3.308473] usb usb1: configuration #1 chosen from 1 choice
> [ 3.308495] hub 1-0:1.0: USB hub found
> [ 3.308501] hub 1-0:1.0: 2 ports detected
> [ 3.387181] input: Video Bus as /class/input/input6
> [ 3.409815] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> [ 3.409999] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
> [ 3.410009] PCI: Setting latency timer of device 0000:00:1d.1 to 64
> [ 3.410013] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 3.410038] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> [ 3.410067] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
> [ 3.410170] usb usb2: configuration #1 chosen from 1 choice
> [ 3.410192] hub 2-0:1.0: USB hub found
> [ 3.410198] hub 2-0:1.0: 2 ports detected
> [ 3.513241] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> [ 3.513252] PCI: Setting latency timer of device 0000:00:1d.2 to 64
> [ 3.513256] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 3.513279] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> [ 3.513313] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
> [ 3.513418] usb usb3: configuration #1 chosen from 1 choice
> [ 3.513440] hub 3-0:1.0: USB hub found
> [ 3.513446] hub 3-0:1.0: 2 ports detected
> [ 3.619190] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
> [ 3.619201] PCI: Setting latency timer of device 0000:00:1d.3 to 64
> [ 3.619204] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 3.619228] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
> [ 3.619261] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
> [ 3.619367] usb usb4: configuration #1 chosen from 1 choice
> [ 3.619390] hub 4-0:1.0: USB hub found
> [ 3.619395] hub 4-0:1.0: 2 ports detected
> [ 3.636455] usb 1-2: new full speed USB device using uhci_hcd and address 2
> [ 3.651461] ath_hal: module license 'Proprietary' taints kernel.
> [ 3.663223] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
> [ 3.683283] wlan: svn r3221
> [ 3.711071] ath_pci: svn r3221
> [ 3.719918] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
> [ 3.719932] PCI: Setting latency timer of device 0000:00:1d.7 to 64
> [ 3.719935] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 3.719961] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
> [ 3.723823] ehci_hcd 0000:00:1d.7: debug port 1
> [ 3.723829] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
> [ 3.723836] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400
> [ 3.759627] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> [ 3.759731] usb usb5: configuration #1 chosen from 1 choice
> [ 3.759756] hub 5-0:1.0: USB hub found
> [ 3.759762] hub 5-0:1.0: 8 ports detected
> [ 3.853097] Marking TSC unstable due to: TSC halts in idle.
> [ 3.183313] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
> [ 3.867148] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
> [ 3.867171] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> [ 3.893921] hda_codec: STAC922x, Apple subsys_id=106b1e00
> [ 3.234477] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
> [ 3.931749] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> [ 3.931762] PCI: Setting latency timer of device 0000:03:00.0 to 64
> [ 4.061648] HAL returned 41 channels.
> [ 4.061653] Channel 1 (2412 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> [ 4.061657] Channel 1 (2412 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> [ 4.061660] Channel 2 (2417 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> [ 4.061663] Channel 2 (2417 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> [ 4.061667] Channel 3 (2422 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> [ 4.061670] Channel 3 (2422 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> [ 4.061673] Channel 4 (2427 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> [ 4.061677] Channel 4 (2427 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> [ 4.061680] Channel 5 (2432 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> [ 4.061683] Channel 5 (2432 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> [ 4.061687] Channel 6 (2437 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> [ 4.061690] Channel 6 (2437 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> [ 4.061693] Channel 6 (2437 MHz) Max Tx Power 18 dBm (reg limited) [31 hw 18 reg] Flags CF_TURBO CF_OFDM CF_2GHZ
> [ 4.061697] Channel 7 (2442 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> [ 4.061700] Channel 7 (2442 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> [ 4.061703] Channel 8 (2447 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> [ 4.061706] Channel 8 (2447 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> [ 4.061709] Channel 9 (2452 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> [ 4.061713] Channel 9 (2452 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> [ 4.061716] Channel 10 (2457 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> [ 4.061719] Channel 10 (2457 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> [ 4.061722] Channel 11 (2462 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> [ 4.061726] Channel 11 (2462 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> [ 4.061729] Channel 36 (5180 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> [ 4.061732] Channel 40 (5200 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> [ 4.061736] Channel 42 (5210 MHz) Max Tx Power 15 dBm (reg limited) [31 hw 15 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_STATIC_TURBO
> [ 4.061739] Channel 44 (5220 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> [ 4.061742] Channel 48 (5240 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> [ 4.061746] Channel 50 (5250 MHz) Max Tx Power 15 dBm (reg limited) [31 hw 15 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY CF_STATIC_TURBO PF_DFS_REQUIRED
> [ 4.061750] Channel 52 (5260 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
> [ 4.061754] Channel 56 (5280 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
> [ 4.061758] Channel 58 (5290 MHz) Max Tx Power 18 dBm (reg limited) [31 hw 18 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY CF_STATIC_TURBO PF_DFS_REQUIRED
> [ 4.061762] Channel 60 (5300 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
> [ 4.061766] Channel 64 (5320 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
> [ 4.061769] Channel 149 (5745 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> [ 4.061773] Channel 152 (5760 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_STATIC_TURBO
> [ 4.061776] Channel 153 (5765 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> [ 4.061779] Channel 157 (5785 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> [ 4.061783] Channel 160 (5800 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_STATIC_TURBO
> [ 4.061786] Channel 161 (5805 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> [ 4.061790] Channel 165 (5825 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> [ 4.061792] ath_pci: switching rfkill capability off
> [ 4.080224] ath_rate_sample: 1.2 (svn r3221)
> [ 4.080224] ath_pci: switching per-packet transmit power control off
> [ 4.080224] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> [ 4.080224] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> [ 4.080224] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> [ 4.080224] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> [ 4.080224] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> [ 4.080224] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
> [ 4.080224] wifi0: mac 12.10 phy 8.1 radio 12.0
> [ 4.080224] wifi0: Use hw queue 1 for WME_AC_BE traffic
> [ 4.080224] wifi0: Use hw queue 0 for WME_AC_BK traffic
> [ 4.080224] wifi0: Use hw queue 2 for WME_AC_VI traffic
> [ 4.080224] wifi0: Use hw queue 3 for WME_AC_VO traffic
> [ 4.080224] wifi0: Use hw queue 8 for CAB traffic
> [ 4.080224] wifi0: Use hw queue 9 for beacons
> [ 4.113529] wifi0: Atheros 5418: mem=0x50100000, irq=17
> [ 4.258239] usb 1-2: device not accepting address 2, error -71
> [ 4.268120] Clocksource tsc unstable (delta = -146744094 ns)
> [ 4.717932] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 4.446532] usb 5-4: new high speed USB device using ehci_hcd and address 3
> [ 5.177113] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe2ad87e]
> [ 5.254452] usb 5-4: configuration #1 chosen from 1 choice
> [ 5.019550] usbcore: registered new interface driver appletouch
> [ 5.792179] Symbol init_mm is marked as UNUSED, however this module is using it.
> [ 5.792183] This symbol will go away in the future.
> [ 5.792185] Please evalute if this is the right api to use, and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
> [ 5.808566] [fglrx] Maximum main memory to use for locked dma buffers: 913 MBytes.
> [ 5.808594] [fglrx] ASYNCIO init succeed!
> [ 5.810559] [fglrx] PAT is enabled successfully!
> [ 5.810581] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
> [ 5.925496] usb 1-2: new full speed USB device using uhci_hcd and address 4
> [ 5.991088] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
> [ 5.991091] intelfb: Version 0.9.4
> [ 6.039295] Console: switching to colour frame buffer device 128x48
> [ 6.087454] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 5.413970] usb 1-2: configuration #1 chosen from 1 choice
> [ 5.420713] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7
> [ 5.445334] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
> [ 5.450550] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 6.137835] appletouch: Geyser mode initialized.
> [ 6.137893] input: appletouch as /class/input/input8
> [ 6.155056] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input9
> [ 6.155056] arp_tables: (C) 2002 David S. Miller
> [ 6.155464] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
> [ 6.212641] ieee80211_crypt: registered algorithm 'NULL'
> [ 6.215127] ieee80211_crypt: registered algorithm 'TKIP'
> [ 6.343049] Adding 2988048k swap on /dev/disk/by-uuid/c58cdc7c-b94b-4116-9cca-bf154269e4d8. Priority:-1 extents:1 across:2988048k
> [ 6.391922] usb 3-2: new full speed USB device using uhci_hcd and address 2
> [ 5.741741] EXT3 FS on sda1, internal journal
> [ 6.565336] usb 3-2: configuration #1 chosen from 1 choice
> [ 5.900025] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
> [ 6.132611] usb 4-1: new full speed USB device using uhci_hcd and address 2
> [ 6.324999] usb 4-1: configuration #1 chosen from 1 choice
> [ 7.019276] input: HID 05ac:1000 as /class/input/input10
> [ 7.046429] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
> [ 7.065228] input: HID 05ac:1000 as /class/input/input11
> [ 7.086132] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
> [ 6.416101] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
> [ 6.418848] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
> [ 6.419743] input: Built-in iSight as /class/input/input12
> [ 6.446317] usbcore: registered new interface driver uvcvideo
> [ 6.446323] USB Video Class driver (SVN r198)
> [ 7.809391] usb 5-4: USB disconnect, address 3
> [ 9.060971] appletouch: incomplete data package (first byte: 2, length: 4).
> [ 9.539766] usb 5-4: new high speed USB device using ehci_hcd and address 6
> [ 9.641888] usb 5-4: configuration #1 chosen from 1 choice
> [ 9.642174] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
> [ 9.644653] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
> [ 9.645339] input: Built-in iSight as /class/input/input13
> [ 10.138778] input: Pommed beeper device as /class/input/input14
> [ 10.241566] Bluetooth: Core ver 2.11
> [ 10.243725] NET: Registered protocol family 31
> [ 10.243728] Bluetooth: HCI device and connection manager initialized
> [ 10.243731] Bluetooth: HCI socket layer initialized
> [ 10.299125] Bluetooth: L2CAP ver 2.9
> [ 10.299125] Bluetooth: L2CAP socket layer initialized
> [ 9.675457] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> [ 9.694644] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
> [ 10.354197] Bluetooth: RFCOMM socket layer initialized
> [ 10.354776] Bluetooth: RFCOMM TTY layer initialized
> [ 10.354779] Bluetooth: RFCOMM ver 1.8
> [ 10.589269] usb 4-1: USB disconnect, address 2
> [ 10.824926] usb 4-1: new full speed USB device using uhci_hcd and address 3
> [ 11.015363] usb 4-1: configuration #1 chosen from 1 choice
> [ 11.086051] Bluetooth: HCI USB driver ver 2.9
> [ 11.089237] usbcore: registered new interface driver hci_usb
> [ 10.603936] CPU0 attaching NULL sched-domain.
> [ 10.603942] CPU1 attaching NULL sched-domain.
> [ 10.613659] CPU0 attaching sched-domain:
> [ 10.613663] domain 0: span 3
> [ 10.613665] groups: 1 2
> [ 10.613668] domain 1: span 3
> [ 10.613669] groups: 3
> [ 10.613672] CPU1 attaching sched-domain:
> [ 10.613673] domain 0: span 3
> [ 10.613675] groups: 2 1
> [ 10.613677] domain 1: span 3
> [ 10.613678] groups: 3
> [ 16.099935] input: Apple Computer, Inc. Mighty Mouse as /class/input/input15
> [ 20.975690] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> [ 23.378169] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
> [ 23.378175] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
> [ 23.378177] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
> [ 24.167068] [fglrx] interrupt source 20008000 successfully enabled
> [ 24.167068] [fglrx] enable ID = 0x00000008
> [ 24.167068] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
> [ 24.167068] [fglrx] interrupt source 10000000 successfully enabled
> [ 24.167068] [fglrx] enable ID = 0x00000009
> [ 24.167068] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
> [ 144.557848] applesmc: wait status failed: 5 != 4
> [ 144.358566] applesmc: wait status failed: c != 8
> [ 144.409864] PM: Syncing filesystems ... done.
> [ 145.650031] Freezing user space processes ... (elapsed 0.11 seconds) done.
> [ 145.764634] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> [ 145.764693] Suspending console(s)
> [ 145.829398] sd 2:0:1:0: [sda] Synchronizing SCSI cache
> [ 145.829602] sd 2:0:1:0: [sda] Stopping disk
> [ 146.795569] ACPI: PCI interrupt for device 0000:03:00.0 disabled
> [ 146.808867] [fglrx] firegl_gps_setpowerdown .
> [ 146.840196] ACPI: PCI interrupt for device 0000:01:00.0 disabled
> [ 146.840417] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
> [ 146.852207] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
> [ 146.852379] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
> [ 146.865455] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
> [ 146.865501] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
> [ 146.865547] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
> [ 146.865591] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
> [ 146.865795] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> [ 146.880615] ACPI: Preparing to enter system sleep state S3
> [ 146.881357] Disabling non-boot CPUs ...
> [ 146.881373] CPU0 attaching NULL sched-domain.
> [ 146.881377] CPU1 attaching NULL sched-domain.
> [ 146.992026] CPU 1 is now offline
> [ 146.992031] SMP alternatives: switching to UP code
> [ 146.993980] CPU0 attaching sched-domain:
> [ 146.993984] domain 0: span 1
> [ 146.993987] groups: 1
> [ 146.994265] CPU1 is down
> [ 146.994265] Intel machine check architecture supported.
> [ 146.994271] Intel machine check reporting enabled on CPU#0.
> [ 146.994309] Back to C!
> [ 146.995386] Enabling non-boot CPUs ...
> [ 146.995451] CPU0 attaching NULL sched-domain.
> [ 146.995560] SMP alternatives: switching to SMP code
> [ 146.998683] Booting processor 1/1 ip 4000
> [ 147.295547] Initializing CPU#1
> [ 147.295547] masked ExtINT on CPU#1
> [ 147.295547] Calibrating delay using timer specific routine.. 4324.69 BogoMIPS (lpj=7204309)
> [ 147.295547] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 147.295547] CPU: L2 cache: 4096K
> [ 147.295547] CPU: Physical Processor ID: 0
> [ 147.295547] CPU: Processor Core ID: 1
> [ 147.295547] Intel machine check architecture supported.
> [ 147.295547] Intel machine check reporting enabled on CPU#1.
> [ 147.092674] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
> [ 147.092726] CPU0 attaching sched-domain:
> [ 147.092729] domain 0: span 3
> [ 147.092730] groups: 1 2
> [ 147.092732] domain 1: span 3
> [ 147.092734] groups: 3
> [ 147.092736] CPU1 attaching sched-domain:
> [ 147.092737] domain 0: span 3
> [ 147.092738] groups: 2 1
> [ 147.092740] domain 1: span 3
> [ 147.092742] groups: 3
> [ 147.295547] CPU1 is up
> [ 147.295552] Switched to NOHz mode on CPU #1
> [ 147.792197] ACPI: EC: missing OBF confirmation, don't expect it any longer.
> [ 148.292164] ACPI: EC: missing write data confirmation, don't expect it any longer.
> [ 148.601213] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b)
> [ 148.601225] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0)
> [ 148.601232] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001)
> [ 148.601239] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030)
> [ 148.601246] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 3030)
> [ 148.601253] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100)
> [ 148.601261] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040)
> [ 148.601269] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007)
> [ 148.601300] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
> [ 148.601309] PCI: Setting latency timer of device 0000:00:01.0 to 64
> [ 148.601320] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b)
> [ 148.601337] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000)
> [ 148.601346] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002)
> [ 148.612161] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
> [ 148.612187] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004)
> [ 148.612196] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40)
> [ 148.612206] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
> [ 148.612236] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
> [ 148.612247] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> [ 148.612295] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051)
> [ 148.612304] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020)
> [ 148.612312] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 2020)
> [ 148.612326] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040)
> [ 148.612336] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
> [ 148.612388] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
> [ 148.612397] PCI: Setting latency timer of device 0000:00:1c.0 to 64
> [ 148.612429] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
> [ 148.612438] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010)
> [ 148.612447] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0)
> [ 148.612460] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040)
> [ 148.612471] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007)
> [ 148.612522] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
> [ 148.612531] PCI: Setting latency timer of device 0000:00:1c.1 to 64
> [ 148.612563] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801)
> [ 148.612572] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10)
> [ 148.612580] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 1010)
> [ 148.612594] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040)
> [ 148.612604] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007)
> [ 148.612656] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
> [ 148.612664] PCI: Setting latency timer of device 0000:00:1c.2 to 64
> [ 148.612675] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
> [ 148.612686] PCI: Setting latency timer of device 0000:00:1d.0 to 64
> [ 148.612748] usb usb1: root hub lost power or was reset
> [ 148.612777] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
> [ 148.612787] PCI: Setting latency timer of device 0000:00:1d.1 to 64
> [ 148.612848] usb usb2: root hub lost power or was reset
> [ 148.612871] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> [ 148.612881] PCI: Setting latency timer of device 0000:00:1d.2 to 64
> [ 148.612942] usb usb3: root hub lost power or was reset
> [ 148.612969] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
> [ 148.612979] PCI: Setting latency timer of device 0000:00:1d.3 to 64
> [ 148.613041] usb usb4: root hub lost power or was reset
> [ 148.625479] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
> [ 148.625490] PCI: Setting latency timer of device 0000:00:1d.7 to 64
> [ 148.625572] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1)
> [ 148.625580] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00)
> [ 148.625589] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 228000f0)
> [ 148.625606] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007)
> [ 148.625635] PCI: Setting latency timer of device 0000:00:1e.0 to 64
> [ 148.625704] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b)
> [ 148.625736] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005)
> [ 148.625750] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
> [ 148.625759] PCI: Setting latency timer of device 0000:00:1f.1 to 64
> [ 148.638818] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b)
> [ 148.638851] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)
> [ 148.638875] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
> [ 148.638885] PCI: Setting latency timer of device 0000:00:1f.2 to 64
> [ 148.642171] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> [ 148.642181] PCI: Setting latency timer of device 0000:01:00.0 to 64
> [ 148.651132] [fglrx] firegl_gps_setpowerup .
> [ 148.656530] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b)
> [ 148.656545] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000)
> [ 148.656567] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001)
> [ 148.656579] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004)
> [ 148.656588] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40)
> [ 148.656600] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 100007)
> [ 148.668840] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a)
> [ 148.668874] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004)
> [ 148.668884] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40)
> [ 148.668896] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007)
> [ 148.668941] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> [ 148.668952] PCI: Setting latency timer of device 0000:03:00.0 to 64
> [ 148.685507] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000)
> [ 148.685516] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000)
> [ 148.685525] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810)
> [ 148.685537] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016)
> [ 148.736588] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
> [ 148.740881] sd 2:0:1:0: [sda] Starting disk
> [ 148.708902] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
> [ 148.708908] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out
> [ 148.722524] ata3.01: configured for UDMA/100
> [ 148.939395] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> [ 148.939401] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out
> [ 148.731368] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> [ 148.731393] sd 2:0:1:0: [sda] Write Protect is off
> [ 148.731397] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
> [ 148.731433] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 148.731664] applesmc: device has already been initialized (0xe0, 0x00).
> [ 149.105985] ata1.00: configured for UDMA/66
> [ 148.962313] Restarting tasks ... <6>usb 1-2: USB disconnect, address 4
> [ 149.003406] done.
> [ 149.068591] Buffer I/O error on device sr0, logical block 356490
> [ 149.068601] Buffer I/O error on device sr0, logical block 356491
> [ 149.068606] Buffer I/O error on device sr0, logical block 356492
> [ 149.068612] Buffer I/O error on device sr0, logical block 356493
> [ 149.068617] Buffer I/O error on device sr0, logical block 356494
> [ 149.068621] Buffer I/O error on device sr0, logical block 356495
> [ 149.068627] Buffer I/O error on device sr0, logical block 356496
> [ 149.068632] Buffer I/O error on device sr0, logical block 356497
> [ 149.068637] Buffer I/O error on device sr0, logical block 356498
> [ 149.068642] Buffer I/O error on device sr0, logical block 356499
> [ 149.135499] input: appletouch disconnected
> [ 149.325200] usb 1-2: new full speed USB device using uhci_hcd and address 5
> [ 149.358524] usb 1-2: configuration #1 chosen from 1 choice
> [ 149.365428] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input16
> [ 149.371879] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
> [ 149.376222] appletouch: Geyser mode initialized.
> [ 149.376267] input: appletouch as /class/input/input17
> [ 149.379214] appletouch: incomplete data package (first byte: 2, length: 4).
> [ 149.384253] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input18
> [ 149.388556] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
> [ 149.391464] usb 3-2: USB disconnect, address 2
> [ 149.591643] usb 3-2: new full speed USB device using uhci_hcd and address 3
> [ 149.761008] usb 3-2: configuration #1 chosen from 1 choice
> [ 149.767228] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
> [ 149.767228] usb 4-1: USB disconnect, address 3
> [ 150.390816] usb 4-1: new full speed USB device using uhci_hcd and address 4
> [ 150.874557] usb 4-1: new full speed USB device using uhci_hcd and address 5
> [ 151.045882] usb 4-1: configuration #1 chosen from 1 choice
> [ 151.072274] input: HID 05ac:1000 as /class/input/input19
> [ 151.074648] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
> [ 151.089934] input: HID 05ac:1000 as /class/input/input20
> [ 151.089934] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
> [ 153.773933] printk: 1322 messages suppressed.
> [ 153.773943] Buffer I/O error on device sr0, logical block 357112
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-04-04 8:21 ` macbook pro dvd playback after suspend Buffer I/O error Andrew Morton
@ 2008-04-04 15:05 ` Justin Mattock
2008-06-11 2:00 ` Tejun Heo
1 sibling, 0 replies; 18+ messages in thread
From: Justin Mattock @ 2008-04-04 15:05 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, linux-ide
Hello; One thing that I noticed with previous kernels is when you put
in the DVD and press play(a few seconds after inserting a DVD), the
player will think for a few seconds then start playback(without a
Buffer error), but I noticed with 2.6.25-rc1 you have to wait for the
cd player to read the DVD then align itself and settle down before
pressing play to avoid the Buffer error.(in the past I was using
2.6.23, then moved to 2.6.24(for a few days and didnt notice,then
reverted to 2.6.23,then went to 2.6.25-rc1 once on 2.5.25-rc1, I
noticed the error. So with all honesty I'm not too sure where this
might be at)
regards;
Justin P. Mattock
On Fri, Apr 4, 2008 at 8:21 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> On Fri, 4 Apr 2008 05:07:45 +0000 "Justin Mattock" <justinmattock@gmail.com> wrote:
>
> > When playing a DVD and then suspending the system while the DVD is
> > still in play, upon wakeup I'm receiving a Buffer I/O error on device
> > sr0, logical block 356490.
> > the DVD will continue to play but then gmplayer complains: Warning!
> > FPS changed 23.976 -> 29.970 (-5.994005) [4] then the video becomes
> > very choppy. When looking at osx in the same test the DVD will be
> > paused until the cd player aligns itself, then playback will start.
> > With looking further at this I think this is an issue of a library or
> > codec, So with this in mind is there a package that I might look at to
> > see if this resolves the issue. Attached is dmesg of the Buffer I/O
> > regards;
>
> An ata thing, I assume. Let's cc linux-ide.
>
> Is this new behaviour in 2.6.25-rc8, or were earlier kernels OK?
>
> > [ 0.000000] Linux version 2.6.25-rc8 (root@unix) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Tue Apr 1 23:57:23 UTC 2008
> > [ 0.000000] BIOS-provided physical RAM map:
> > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> > [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable)
> > [ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS)
> > [ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data)
> > [ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS)
> > [ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data)
> > [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> > [ 0.000000] 112MB HIGHMEM available.
> > [ 0.000000] 896MB LOWMEM available.
> > [ 0.000000] Scan SMP from c0000000 for 1024 bytes.
> > [ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
> > [ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
> > [ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
> > [ 0.000000] Entering add_active_range(0, 0, 258282) 0 entries of 256 used
> > [ 0.000000] Zone PFN ranges:
> > [ 0.000000] DMA 0 -> 4096
> > [ 0.000000] Normal 4096 -> 229376
> > [ 0.000000] HighMem 229376 -> 258282
> > [ 0.000000] Movable zone start PFN for each node
> > [ 0.000000] early_node_map[1] active PFN ranges
> > [ 0.000000] 0: 0 -> 258282
> > [ 0.000000] On node 0 totalpages: 258282
> > [ 0.000000] DMA zone: 32 pages used for memmap
> > [ 0.000000] DMA zone: 0 pages reserved
> > [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
> > [ 0.000000] Normal zone: 1760 pages used for memmap
> > [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
> > [ 0.000000] HighMem zone: 225 pages used for memmap
> > [ 0.000000] HighMem zone: 28681 pages, LIFO batch:7
> > [ 0.000000] Movable zone: 0 pages used for memmap
> > [ 0.000000] DMI 2.4 present.
> > [ 0.000000] Using APIC driver default
> > [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
> > [ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
> > [ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
> > [ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309)
> > [ 0.000000] ACPI: FACS 3FEC0000, 0040
> > [ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
> > [ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
> > [ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
> > [ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
> > [ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
> > [ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
> > [ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
> > [ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
> > [ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
> > [ 0.000000] ACPI: DMI detected: Apple
> > [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > [ 0.000000] Processor #0 6:15 APIC version 20
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> > [ 0.000000] Processor #1 6:15 APIC version 20
> > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> > [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> > [ 0.000000] ACPI: IRQ0 used by override.
> > [ 0.000000] ACPI: IRQ2 used by override.
> > [ 0.000000] ACPI: IRQ9 used by override.
> > [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
> > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> > [ 0.000000] Using ACPI (MADT) for SMP configuration information
> > [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
> > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
> > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256265
> > [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash vga=773 selinux=1 audit=1 enforcing=1 highres=off apic=verbose acpi_osi=Linux pnpacpi=off usbcore.autosuspend=1 pci=routeirq
> > [ 0.000000] audit: enabled (after initialization)
> > [ 0.000000] ACPI: Added _OSI(Linux)
> > [ 0.000000] mapped APIC to ffffb000 (fee00000)
> > [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
> > [ 0.000000] Enabling fast FPU save and restore... done.
> > [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> > [ 0.000000] Initializing CPU#0
> > [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
> > [ 0.000000] Detected 2161.255 MHz processor.
> > [ 0.003333] Console: colour dummy device 80x25
> > [ 0.003333] console [tty0] enabled
> > [ 0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> > [ 0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> > [ 0.003333] Memory: 1019064k/1033128k available (2490k kernel code, 13416k reserved, 959k data, 332k init, 115624k highmem)
> > [ 0.003333] virtual kernel memory layout:
> > [ 0.003333] fixmap : 0xfff9a000 - 0xfffff000 ( 404 kB)
> > [ 0.003333] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> > [ 0.003333] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
> > [ 0.003333] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> > [ 0.003333] .init : 0xc0466000 - 0xc04b9000 ( 332 kB)
> > [ 0.003333] .data : 0xc036e8c8 - 0xc045e740 ( 959 kB)
> > [ 0.003333] .text : 0xc0100000 - 0xc036e8c8 (2490 kB)
> > [ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> > [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated
> > [ 0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
> > [ 0.003333] hpet clockevent registered
> > [ 0.083331] Calibrating delay using timer specific routine.. 4328.69 BogoMIPS (lpj=7210719)
> > [ 0.083348] Security Framework initialized
> > [ 0.083351] SELinux: Initializing.
> > [ 0.083358] SELinux: Starting in enforcing mode
> > [ 0.083366] selinux_register_security: Registering secondary module capability
> > [ 0.083368] Capability LSM initialized as secondary
> > [ 0.083377] Mount-cache hash table entries: 512
> > [ 0.083484] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.083486] CPU: L2 cache: 4096K
> > [ 0.083489] CPU: Physical Processor ID: 0
> > [ 0.083490] CPU: Processor Core ID: 0
> > [ 0.083492] Intel machine check architecture supported.
> > [ 0.083495] Intel machine check reporting enabled on CPU#0.
> > [ 0.083497] using mwait in idle threads.
> > [ 0.083500] Compat vDSO mapped to ffffe000.
> > [ 0.083505] Checking 'hlt' instruction... OK.
> > [ 0.097770] ACPI: Core revision 20070126
> > [ 0.105392] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
> > [ 0.105398] enabled ExtINT on CPU#0
> > [ 0.105407] Booting processor 1/1 ip 4000
> > [ 0.003333] Initializing CPU#1
> > [ 0.003333] masked ExtINT on CPU#1
> > [ 0.003333] Calibrating delay using timer specific routine.. 4324.65 BogoMIPS (lpj=7204251)
> > [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.003333] CPU: L2 cache: 4096K
> > [ 0.003333] CPU: Physical Processor ID: 0
> > [ 0.003333] CPU: Processor Core ID: 1
> > [ 0.003333] Intel machine check architecture supported.
> > [ 0.003333] Intel machine check reporting enabled on CPU#1.
> > [ 0.197373] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
> > [ 0.197387] Total of 2 processors activated (8652.35 BogoMIPS).
> > [ 0.197578] ENABLING IO-APIC IRQs
> > [ 0.197579] init IO_APIC IRQs
> > [ 0.197581] IO-APIC (apicid-pin) 1-0 not connected.
> > [ 0.197625] IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
> > [ 0.197777] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> > [ 0.230814] Using local APIC timer interrupts.
> > [ 0.230815] calibrating APIC timer ...
> > [ 0.233318] ... lapic delta = 1039057
> > [ 0.233318] ... PM timer delta = 357953
> > [ 0.233318] ... PM timer result ok
> > [ 0.233318] ..... delta 1039057
> > [ 0.233318] ..... mult: 44630068
> > [ 0.233318] ..... calibration result: 554163
> > [ 0.233318] ..... CPU clock speed is 2161.1523 MHz.
> > [ 0.233318] ..... host bus clock speed is 166.0885 MHz.
> > [ 0.233318] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> > [ 0.233334] Brought up 2 CPUs
> > [ 0.233358] CPU0 attaching sched-domain:
> > [ 0.233360] domain 0: span 3
> > [ 0.233362] groups: 1 2
> > [ 0.233365] CPU1 attaching sched-domain:
> > [ 0.233366] domain 0: span 3
> > [ 0.233368] groups: 2 1
> > [ 0.233604] net_namespace: 452 bytes
> > [ 0.233613] Booting paravirtualized kernel on bare hardware
> > [ 0.233781] NET: Registered protocol family 16
> > [ 0.233952] No dock devices found.
> > [ 0.234059] EISA bus registered
> > [ 0.234063] ACPI: bus type pci registered
> > [ 0.234139] PCI: Using configuration type 1
> > [ 0.234141] Setting up standard PCI resources
> > [ 0.236136] ACPI: EC: EC description table is found, configuring boot EC
> > [ 0.236316] ACPI: EC: non-query interrupt received, switching to interrupt mode
> > [ 0.239148] ACPI: BIOS _OSI(Linux) query honored via cmdline
> > [ 0.239488] ACPI: Interpreter enabled
> > [ 0.239491] ACPI: (supports S0 S3 S4 S5)
> > [ 0.239502] ACPI: Using IOAPIC for interrupt routing
> > [ 0.252698] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
> > [ 0.252700] ACPI: EC: driver started in poll mode
> > [ 0.254869] ACPI: PCI Root Bridge [PCI0] (0000:00)
> > [ 0.255644] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
> > [ 0.255649] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
> > [ 0.256495] PCI: Transparent bridge - 0000:00:1e.0
> > [ 0.256539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > [ 0.256853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
> > [ 0.256970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> > [ 0.257083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> > [ 0.257195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> > [ 0.257315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> > [ 0.263253] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> > [ 0.263349] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> > [ 0.263435] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> > [ 0.263528] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> > [ 0.263615] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
> > [ 0.263700] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> > [ 0.263785] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
> > [ 0.263870] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
> > [ 0.264244] Linux Plug and Play Support v0.97 (c) Adam Belay
> > [ 0.264276] pnp: PnP ACPI: disabled
> > [ 0.264463] SCSI subsystem initialized
> > [ 0.264521] libata version 3.00 loaded.
> > [ 0.264627] usbcore: registered new interface driver usbfs
> > [ 0.264685] usbcore: registered new interface driver hub
> > [ 0.264739] usbcore: registered new device driver usb
> > [ 0.264994] PCI: Using ACPI for IRQ routing
> > [ 0.264997] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
> > [ 0.265001] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.265004] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.265007] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
> > [ 0.265011] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
> > [ 0.265013] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.265016] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
> > [ 0.265019] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
> > [ 0.265023] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
> > [ 0.265025] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> > [ 0.265028] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.265031] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
> > [ 0.265033] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
> > [ 0.265036] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
> > [ 0.265039] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
> > [ 0.265041] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.265044] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.265047] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> > [ 0.265049] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
> > [ 0.265052] number of MP IRQ sources: 15.
> > [ 0.265053] number of IO-APIC #1 registers: 24.
> > [ 0.265055] testing the IO APIC.......................
> > [ 0.265063] IO APIC #1......
> > [ 0.265064] .... register #00: 00000000
> > [ 0.265066] ....... : physical APIC id: 00
> > [ 0.265067] ....... : Delivery Type: 0
> > [ 0.265068] ....... : LTS : 0
> > [ 0.265069] .... register #01: 00170020
> > [ 0.265071] ....... : max redirection entries: 0017
> > [ 0.265072] ....... : PRQ implemented: 0
> > [ 0.265074] ....... : IO APIC version: 0020
> > [ 0.265075] .... IRQ redirection table:
> > [ 0.265076] NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> > [ 0.265081] 00 000 00 1 0 0 0 0 0 0 00
> > [ 0.265087] 01 003 03 0 0 0 0 0 1 1 39
> > [ 0.265093] 02 003 03 0 0 0 0 0 1 1 31
> > [ 0.265099] 03 003 03 0 0 0 0 0 1 1 41
> > [ 0.265105] 04 003 03 0 0 0 0 0 1 1 49
> > [ 0.265110] 05 003 03 0 0 0 0 0 1 1 51
> > [ 0.265116] 06 003 03 0 0 0 0 0 1 1 59
> > [ 0.265122] 07 003 03 0 0 0 0 0 1 1 61
> > [ 0.265127] 08 003 03 0 0 0 0 0 1 1 69
> > [ 0.265133] 09 003 03 0 1 0 0 0 1 1 71
> > [ 0.265139] 0a 003 03 0 0 0 0 0 1 1 79
> > [ 0.265144] 0b 003 03 0 0 0 0 0 1 1 81
> > [ 0.265150] 0c 003 03 0 0 0 0 0 1 1 89
> > [ 0.265156] 0d 003 03 0 0 0 0 0 1 1 91
> > [ 0.265161] 0e 003 03 0 0 0 0 0 1 1 99
> > [ 0.265167] 0f 003 03 0 0 0 0 0 1 1 A1
> > [ 0.265173] 10 003 03 1 1 0 1 0 1 1 A9
> > [ 0.265179] 11 003 03 1 1 0 1 0 1 1 B9
> > [ 0.265184] 12 003 03 1 1 0 1 0 1 1 C1
> > [ 0.265190] 13 003 03 1 1 0 1 0 1 1 D1
> > [ 0.265196] 14 000 00 1 0 0 0 0 0 0 00
> > [ 0.265202] 15 000 00 1 0 0 0 0 0 0 00
> > [ 0.265207] 16 003 03 1 1 0 1 0 1 1 B1
> > [ 0.265213] 17 003 03 1 1 0 1 0 1 1 C9
> > [ 0.265215] IRQ to pin mappings:
> > [ 0.265217] IRQ0 -> 0:2
> > [ 0.265218] IRQ1 -> 0:1
> > [ 0.265220] IRQ3 -> 0:3
> > [ 0.265222] IRQ4 -> 0:4
> > [ 0.265223] IRQ5 -> 0:5
> > [ 0.265225] IRQ6 -> 0:6
> > [ 0.265226] IRQ7 -> 0:7
> > [ 0.265228] IRQ8 -> 0:8
> > [ 0.265230] IRQ9 -> 0:9
> > [ 0.265231] IRQ10 -> 0:10
> > [ 0.265233] IRQ11 -> 0:11
> > [ 0.265235] IRQ12 -> 0:12
> > [ 0.265236] IRQ13 -> 0:13
> > [ 0.265238] IRQ14 -> 0:14
> > [ 0.265239] IRQ15 -> 0:15
> > [ 0.265241] IRQ16 -> 0:16
> > [ 0.265243] IRQ17 -> 0:17
> > [ 0.265244] IRQ18 -> 0:18
> > [ 0.265246] IRQ19 -> 0:19
> > [ 0.265247] IRQ22 -> 0:22
> > [ 0.265249] IRQ23 -> 0:23
> > [ 0.265251] .................................... done.
> > [ 0.269996] NetLabel: Initializing
> > [ 0.269997] NetLabel: domain hash size = 128
> > [ 0.269999] NetLabel: protocols = UNLABELED CIPSOv4
> > [ 0.270011] NetLabel: unlabeled traffic allowed by default
> > [ 0.270021] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11
> > [ 0.270025] hpet0: 3 64-bit timers, 14318180 Hz
> > [ 0.307160] PCI: Bridge: 0000:00:01.0
> > [ 0.307162] IO window: 3000-3fff
> > [ 0.307166] MEM window: 0x50300000-0x503fffff
> > [ 0.307169] PREFETCH window: 0x0000000040000000-0x0000000047ffffff
> > [ 0.307173] PCI: Bridge: 0000:00:1c.0
> > [ 0.307176] IO window: 2000-2fff
> > [ 0.307181] MEM window: 0x50200000-0x502fffff
> > [ 0.307186] PREFETCH window: 0x0000000050500000-0x00000000505fffff
> > [ 0.307193] PCI: Bridge: 0000:00:1c.1
> > [ 0.307194] IO window: disabled.
> > [ 0.307199] MEM window: 0x50100000-0x501fffff
> > [ 0.307203] PREFETCH window: disabled.
> > [ 0.307210] PCI: Bridge: 0000:00:1c.2
> > [ 0.307213] IO window: 1000-1fff
> > [ 0.307218] MEM window: 0x4c100000-0x500fffff
> > [ 0.307222] PREFETCH window: 0x0000000048000000-0x000000004bffffff
> > [ 0.307230] PCI: Bridge: 0000:00:1e.0
> > [ 0.307231] IO window: disabled.
> > [ 0.307236] MEM window: 0x4c000000-0x4c0fffff
> > [ 0.307240] PREFETCH window: disabled.
> > [ 0.307255] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.307260] PCI: Setting latency timer of device 0000:00:01.0 to 64
> > [ 0.307281] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
> > [ 0.307286] PCI: Setting latency timer of device 0000:00:1c.0 to 64
> > [ 0.307308] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
> > [ 0.307314] PCI: Setting latency timer of device 0000:00:1c.1 to 64
> > [ 0.307336] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
> > [ 0.307341] PCI: Setting latency timer of device 0000:00:1c.2 to 64
> > [ 0.307354] PCI: Setting latency timer of device 0000:00:1e.0 to 64
> > [ 0.307363] NET: Registered protocol family 2
> > [ 0.320025] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> > [ 0.320209] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> > [ 0.320565] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> > [ 0.320740] TCP: Hash tables configured (established 131072 bind 65536)
> > [ 0.320743] TCP reno registered
> > [ 0.094028] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
> > [ 0.094312] audit: initializing netlink socket (enabled)
> > [ 0.094323] type=2000 audit(1207283385.326:1): initialized
> > [ 0.094501] highmem bounce pool size: 64 pages
> > [ 0.094505] Total HugeTLB memory allocated, 0
> > [ 0.097174] fuse init (API version 7.9)
> > [ 0.097442] SELinux: Registering netfilter hooks
> > [ 0.097510] io scheduler noop registered
> > [ 0.097563] io scheduler cfq registered (default)
> > [ 0.097660] pci 0000:01:00.0: Boot video device
> > [ 0.097777] vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 1536k, total 16384k
> > [ 0.097779] vesafb: mode is 1024x768x8, linelength=1024, pages=18
> > [ 0.097781] vesafb: protected mode interface info at c000:ad0c
> > [ 0.097783] vesafb: pmi: set display start = c00cad94, set palette = c00cae50
> > [ 0.097785] vesafb: scrolling: redraw
> > [ 0.097787] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
> > [ 0.097839] fb0: VESA VGA frame buffer device
> > [ 0.097913] power_supply ADP1: uevent
> > [ 0.097915] power_supply ADP1: No power supply yet
> > [ 0.097946] power_supply ADP1: power_supply_changed
> > [ 0.097951] ACPI: AC Adapter [ADP1] (on-line)
> > [ 0.097995] power_supply ADP1: power_supply_changed_work
> > [ 0.097997] power_supply ADP1: power_supply_update_gen_leds 1
> > [ 0.098003] power_supply ADP1: uevent
> > [ 0.098004] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
> > [ 0.098009] power_supply ADP1: Static prop TYPE=Mains
> > [ 0.098011] power_supply ADP1: 1 dynamic props
> > [ 0.098013] power_supply ADP1: prop ONLINE=1
> > [ 0.332231] ACPI: EC: non-query interrupt received, switching to interrupt mode
> > [ 0.432875] power_supply BAT0: uevent
> > [ 0.432877] power_supply BAT0: No power supply yet
> > [ 0.432955] power_supply BAT0: power_supply_changed
> > [ 0.433020] power_supply BAT0: power_supply_changed_work
> > [ 0.458794] ACPI: Battery Slot [BAT0] (battery present)
> > [ 0.463083] hpet_resources: 0xfed00000 is busy
> > [ 0.463620] loop: module loaded
> > [ 0.463645] Linux video capture interface: v2.00
> > [ 0.463871] input: Macintosh mouse button emulation as /class/input/input0
> > [ 0.464036] Driver 'sd' needs updating - please use bus_type methods
> > [ 0.464066] Driver 'sr' needs updating - please use bus_type methods
> > [ 0.464259] ata_piix 0000:00:1f.1: version 2.12
> > [ 0.464267] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
> > [ 0.464300] PCI: Setting latency timer of device 0000:00:1f.1 to 64
> > [ 0.464373] scsi0 : ata_piix
> > [ 0.464457] scsi1 : ata_piix
> > [ 0.464974] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
> > [ 0.464977] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
> > [ 0.488663] power_supply BAT0: power_supply_update_bat_leds 4
> > [ 0.488669] power_supply BAT0: uevent
> > [ 0.488670] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
> > [ 0.488674] power_supply BAT0: Static prop TYPE=Battery
> > [ 0.488676] power_supply BAT0: 12 dynamic props
> > [ 0.488678] power_supply BAT0: prop STATUS=Full
> > [ 0.488681] power_supply BAT0: prop PRESENT=1
> > [ 0.488683] power_supply BAT0: prop TECHNOLOGY=Unknown
> > [ 0.488685] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
> > [ 0.488688] power_supply BAT0: prop VOLTAGE_NOW=12453000
> > [ 0.488690] power_supply BAT0: prop CURRENT_NOW=0
> > [ 0.488692] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
> > [ 0.488695] power_supply BAT0: prop ENERGY_FULL=53150000
> > [ 0.488697] power_supply BAT0: prop ENERGY_NOW=51380000
> > [ 0.488699] power_supply BAT0: prop MODEL_NAME=ASMB012
> > [ 0.488701] power_supply BAT0: prop MANUFACTURER=SMPN012
> > [ 0.488703] power_supply BAT0: prop SERIAL_NUMBER=
> > [ 0.266661] Switched to NOHz mode on CPU #1
> > [ 0.503310] Switched to NOHz mode on CPU #0
> > [ 0.280565] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66
> > [ 0.290514] ata1.00: configured for UDMA/66
> > [ 0.509974] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5
> > [ 0.513308] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> > [ 0.513308] Uniform CD-ROM driver Revision: 3.20
> > [ 0.513308] sr 0:0:0:0: Attached scsi CD-ROM sr0
> > [ 0.513308] sr 0:0:0:0: Attached scsi generic sg0 type 5
> > [ 0.513308] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
> > [ 0.513308] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
> > [ 0.519983] PCI: Setting latency timer of device 0000:00:1f.2 to 64
> > [ 0.520029] scsi2 : ata_piix
> > [ 0.520107] scsi3 : ata_piix
> > [ 0.520984] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
> > [ 0.520987] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
> > [ 0.539973] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
> > [ 0.539973] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
> > [ 0.543810] ata3.01: configured for UDMA/100
> > [ 0.553305] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
> > [ 0.553305] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> > [ 0.553305] sd 2:0:1:0: [sda] Write Protect is off
> > [ 0.553305] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
> > [ 0.553305] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 0.553305] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> > [ 0.553305] sd 2:0:1:0: [sda] Write Protect is off
> > [ 0.553305] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
> > [ 0.553305] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 0.553305] sda: sda1 sda2 < sda5 >
> > [ 0.553305] sd 2:0:1:0: [sda] Attached SCSI disk
> > [ 0.553305] sd 2:0:1:0: Attached scsi generic sg1 type 0
> > [ 0.553305] usbcore: registered new interface driver usblcd
> > [ 0.553305] usbcore: registered new interface driver usbled
> > [ 0.553305] PNP: No PS/2 controller found. Probing ports directly.
> > [ 0.553305] i8042.c: No controller found.
> > [ 0.560048] mice: PS/2 mouse device common for all mice
> > [ 0.560112] applesmc: Apple MacBook Pro detected:
> > [ 0.560114] applesmc: - Model with accelerometer
> > [ 0.560115] applesmc: - Model with light sensors and backlight
> > [ 0.560117] applesmc: - Model with 12 temperature sensors
> > [ 0.560665] applesmc: device has already been initialized (0xe0, 0x00).
> > [ 0.560667] applesmc: device successfully initialized.
> > [ 0.560866] applesmc: 2 fans found.
> > [ 0.561508] input: applesmc as /class/input/input1
> > [ 0.561570] Registered led device: smc::kbd_backlight
> > [ 0.561607] applesmc: driver successfully loaded.
> > [ 0.561675] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
> > [ 0.561677] EDAC MC: Ver: 2.1.0 Apr 1 2008
> > [ 0.561874] cpuidle: using governor ladder
> > [ 0.561876] cpuidle: using governor menu
> > [ 0.561912] usbcore: registered new interface driver hiddev
> > [ 0.561945] usbcore: registered new interface driver usbhid
> > [ 0.561948] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> > [ 0.561983] Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
> > [ 0.561985] ALSA device list:
> > [ 0.561986] No soundcards found.
> > [ 0.562041] oprofile: using NMI interrupt.
> > [ 0.562439] IPVS: Registered protocols (TCP, AH, ESP)
> > [ 0.562452] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
> > [ 0.562472] IPVS: ipvs loaded.
> > [ 0.562473] Initializing XFRM netlink socket
> > [ 0.562485] NET: Registered protocol family 1
> > [ 0.562493] NET: Registered protocol family 17
> > [ 0.562497] NET: Registered protocol family 15
> > [ 0.562504] Starting balanced_irq
> > [ 0.562530] Using IPI No-Shortcut mode
> > [ 0.343320] kjournald starting. Commit interval 5 seconds
> > [ 0.563305] EXT3-fs: mounted filesystem with ordered data mode.
> > [ 0.563305] VFS: Mounted root (ext3 filesystem) readonly.
> > [ 0.563305] Freeing unused kernel memory: 332k freed
> > [ 0.717700] SELinux:8192 avtab hash slots allocated. Num of rules:203526
> > [ 0.748552] SELinux:8192 avtab hash slots allocated. Num of rules:203526
> > [ 0.780144] security: 7 users, 7 roles, 2631 types, 89 bools
> > [ 0.780147] security: 69 classes, 203526 rules
> > [ 0.781474] SELinux: Completing initialization.
> > [ 0.781476] SELinux: Setting up existing superblocks.
> > [ 0.783291] SELinux: initialized (dev sda1, type ext3), uses xattr
> > [ 0.783291] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> > [ 0.783291] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> > [ 0.783291] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 0.783291] SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> > [ 0.783291] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> > [ 0.783291] SELinux: initialized (dev proc, type proc), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> > [ 0.783291] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> > [ 0.783606] SELinux: policy loaded with handle_unknown=deny
> > [ 0.783613] type=1403 audit(1207283387.446:2): policy loaded auid=4294967295 ses=4294967295
> > [ 0.956623] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 0.707038] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 0.958218] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 1.048272] power_supply ADP1: uevent
> > [ 1.048275] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
> > [ 1.048279] power_supply ADP1: Static prop TYPE=Mains
> > [ 1.048281] power_supply ADP1: 1 dynamic props
> > [ 1.048283] power_supply ADP1: prop ONLINE=1
> > [ 1.048299] power_supply BAT0: uevent
> > [ 1.048300] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
> > [ 1.048303] power_supply BAT0: Static prop TYPE=Battery
> > [ 1.048305] power_supply BAT0: 12 dynamic props
> > [ 1.748730] power_supply BAT0: prop STATUS=Full
> > [ 1.748735] power_supply BAT0: prop PRESENT=1
> > [ 1.748738] power_supply BAT0: prop TECHNOLOGY=Unknown
> > [ 1.748741] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
> > [ 1.748743] power_supply BAT0: prop VOLTAGE_NOW=12452000
> > [ 1.748746] power_supply BAT0: prop CURRENT_NOW=0
> > [ 1.748748] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
> > [ 1.748750] power_supply BAT0: prop ENERGY_FULL=53150000
> > [ 1.748753] power_supply BAT0: prop ENERGY_NOW=51380000
> > [ 1.748755] power_supply BAT0: prop MODEL_NAME=ASMB012
> > [ 1.748758] power_supply BAT0: prop MANUFACTURER=SMPN012
> > [ 1.748760] power_supply BAT0: prop SERIAL_NUMBER=
> > [ 2.259246] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309)
> > [ 2.259524] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
> > [ 2.961917] Monitor-Mwait will be used to enter C-1 state
> > [ 2.961921] Monitor-Mwait will be used to enter C-2 state
> > [ 2.961923] Monitor-Mwait will be used to enter C-3 state
> > [ 2.961985] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> > [ 2.962013] ACPI: ACPI0007:00 is registered as cooling_device0
> > [ 2.962018] ACPI: Processor [CPU0] (supports 8 throttling states)
> > [ 2.962360] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
> > [ 2.962570] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
> > [ 2.283458] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> > [ 2.283478] ACPI: ACPI0007:01 is registered as cooling_device1
> > [ 2.283482] ACPI: Processor [CPU1] (supports 8 throttling states)
> > [ 2.978015] input: Power Button (FF) as /class/input/input2
> > [ 3.003200] ACPI: Power Button (FF) [PWRF]
> > [ 3.003267] input: Lid Switch as /class/input/input3
> > [ 3.003326] ACPI: Lid Switch [LID0]
> > [ 3.003373] input: Power Button (CM) as /class/input/input4
> > [ 3.042126] ACPI: Power Button (CM) [PWRB]
> > [ 3.042198] input: Sleep Button (CM) as /class/input/input5
> > [ 3.056493] ACPI: Sleep Button (CM) [SLPB]
> > [ 3.230052] Linux agpgart interface v0.103
> > [ 3.307976] USB Universal Host Controller Interface driver v3.0
> > [ 3.308018] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
> > [ 3.308029] PCI: Setting latency timer of device 0000:00:1d.0 to 64
> > [ 3.308032] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> > [ 3.308220] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> > [ 3.308316] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> > [ 3.308351] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
> > [ 3.308473] usb usb1: configuration #1 chosen from 1 choice
> > [ 3.308495] hub 1-0:1.0: USB hub found
> > [ 3.308501] hub 1-0:1.0: 2 ports detected
> > [ 3.387181] input: Video Bus as /class/input/input6
> > [ 3.409815] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> > [ 3.409999] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
> > [ 3.410009] PCI: Setting latency timer of device 0000:00:1d.1 to 64
> > [ 3.410013] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> > [ 3.410038] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> > [ 3.410067] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
> > [ 3.410170] usb usb2: configuration #1 chosen from 1 choice
> > [ 3.410192] hub 2-0:1.0: USB hub found
> > [ 3.410198] hub 2-0:1.0: 2 ports detected
> > [ 3.513241] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> > [ 3.513252] PCI: Setting latency timer of device 0000:00:1d.2 to 64
> > [ 3.513256] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> > [ 3.513279] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> > [ 3.513313] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
> > [ 3.513418] usb usb3: configuration #1 chosen from 1 choice
> > [ 3.513440] hub 3-0:1.0: USB hub found
> > [ 3.513446] hub 3-0:1.0: 2 ports detected
> > [ 3.619190] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
> > [ 3.619201] PCI: Setting latency timer of device 0000:00:1d.3 to 64
> > [ 3.619204] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> > [ 3.619228] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
> > [ 3.619261] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
> > [ 3.619367] usb usb4: configuration #1 chosen from 1 choice
> > [ 3.619390] hub 4-0:1.0: USB hub found
> > [ 3.619395] hub 4-0:1.0: 2 ports detected
> > [ 3.636455] usb 1-2: new full speed USB device using uhci_hcd and address 2
> > [ 3.651461] ath_hal: module license 'Proprietary' taints kernel.
> > [ 3.663223] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
> > [ 3.683283] wlan: svn r3221
> > [ 3.711071] ath_pci: svn r3221
> > [ 3.719918] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
> > [ 3.719932] PCI: Setting latency timer of device 0000:00:1d.7 to 64
> > [ 3.719935] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> > [ 3.719961] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
> > [ 3.723823] ehci_hcd 0000:00:1d.7: debug port 1
> > [ 3.723829] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
> > [ 3.723836] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400
> > [ 3.759627] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> > [ 3.759731] usb usb5: configuration #1 chosen from 1 choice
> > [ 3.759756] hub 5-0:1.0: USB hub found
> > [ 3.759762] hub 5-0:1.0: 8 ports detected
> > [ 3.853097] Marking TSC unstable due to: TSC halts in idle.
> > [ 3.183313] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
> > [ 3.867148] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
> > [ 3.867171] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> > [ 3.893921] hda_codec: STAC922x, Apple subsys_id=106b1e00
> > [ 3.234477] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
> > [ 3.931749] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> > [ 3.931762] PCI: Setting latency timer of device 0000:03:00.0 to 64
> > [ 4.061648] HAL returned 41 channels.
> > [ 4.061653] Channel 1 (2412 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061657] Channel 1 (2412 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061660] Channel 2 (2417 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061663] Channel 2 (2417 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061667] Channel 3 (2422 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061670] Channel 3 (2422 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061673] Channel 4 (2427 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061677] Channel 4 (2427 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061680] Channel 5 (2432 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061683] Channel 5 (2432 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061687] Channel 6 (2437 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061690] Channel 6 (2437 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061693] Channel 6 (2437 MHz) Max Tx Power 18 dBm (reg limited) [31 hw 18 reg] Flags CF_TURBO CF_OFDM CF_2GHZ
> > [ 4.061697] Channel 7 (2442 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061700] Channel 7 (2442 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061703] Channel 8 (2447 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061706] Channel 8 (2447 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061709] Channel 9 (2452 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061713] Channel 9 (2452 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061716] Channel 10 (2457 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061719] Channel 10 (2457 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061722] Channel 11 (2462 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
> > [ 4.061726] Channel 11 (2462 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
> > [ 4.061729] Channel 36 (5180 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061732] Channel 40 (5200 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061736] Channel 42 (5210 MHz) Max Tx Power 15 dBm (reg limited) [31 hw 15 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_STATIC_TURBO
> > [ 4.061739] Channel 44 (5220 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061742] Channel 48 (5240 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061746] Channel 50 (5250 MHz) Max Tx Power 15 dBm (reg limited) [31 hw 15 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY CF_STATIC_TURBO PF_DFS_REQUIRED
> > [ 4.061750] Channel 52 (5260 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
> > [ 4.061754] Channel 56 (5280 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
> > [ 4.061758] Channel 58 (5290 MHz) Max Tx Power 18 dBm (reg limited) [31 hw 18 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY CF_STATIC_TURBO PF_DFS_REQUIRED
> > [ 4.061762] Channel 60 (5300 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
> > [ 4.061766] Channel 64 (5320 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
> > [ 4.061769] Channel 149 (5745 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061773] Channel 152 (5760 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_STATIC_TURBO
> > [ 4.061776] Channel 153 (5765 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061779] Channel 157 (5785 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061783] Channel 160 (5800 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_STATIC_TURBO
> > [ 4.061786] Channel 161 (5805 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061790] Channel 165 (5825 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
> > [ 4.061792] ath_pci: switching rfkill capability off
> > [ 4.080224] ath_rate_sample: 1.2 (svn r3221)
> > [ 4.080224] ath_pci: switching per-packet transmit power control off
> > [ 4.080224] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> > [ 4.080224] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> > [ 4.080224] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> > [ 4.080224] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> > [ 4.080224] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> > [ 4.080224] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
> > [ 4.080224] wifi0: mac 12.10 phy 8.1 radio 12.0
> > [ 4.080224] wifi0: Use hw queue 1 for WME_AC_BE traffic
> > [ 4.080224] wifi0: Use hw queue 0 for WME_AC_BK traffic
> > [ 4.080224] wifi0: Use hw queue 2 for WME_AC_VI traffic
> > [ 4.080224] wifi0: Use hw queue 3 for WME_AC_VO traffic
> > [ 4.080224] wifi0: Use hw queue 8 for CAB traffic
> > [ 4.080224] wifi0: Use hw queue 9 for beacons
> > [ 4.113529] wifi0: Atheros 5418: mem=0x50100000, irq=17
> > [ 4.258239] usb 1-2: device not accepting address 2, error -71
> > [ 4.268120] Clocksource tsc unstable (delta = -146744094 ns)
> > [ 4.717932] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > [ 4.446532] usb 5-4: new high speed USB device using ehci_hcd and address 3
> > [ 5.177113] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe2ad87e]
> > [ 5.254452] usb 5-4: configuration #1 chosen from 1 choice
> > [ 5.019550] usbcore: registered new interface driver appletouch
> > [ 5.792179] Symbol init_mm is marked as UNUSED, however this module is using it.
> > [ 5.792183] This symbol will go away in the future.
> > [ 5.792185] Please evalute if this is the right api to use, and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
> > [ 5.808566] [fglrx] Maximum main memory to use for locked dma buffers: 913 MBytes.
> > [ 5.808594] [fglrx] ASYNCIO init succeed!
> > [ 5.810559] [fglrx] PAT is enabled successfully!
> > [ 5.810581] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
> > [ 5.925496] usb 1-2: new full speed USB device using uhci_hcd and address 4
> > [ 5.991088] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
> > [ 5.991091] intelfb: Version 0.9.4
> > [ 6.039295] Console: switching to colour frame buffer device 128x48
> > [ 6.087454] ip_tables: (C) 2000-2006 Netfilter Core Team
> > [ 5.413970] usb 1-2: configuration #1 chosen from 1 choice
> > [ 5.420713] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7
> > [ 5.445334] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
> > [ 5.450550] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> > [ 6.137835] appletouch: Geyser mode initialized.
> > [ 6.137893] input: appletouch as /class/input/input8
> > [ 6.155056] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input9
> > [ 6.155056] arp_tables: (C) 2002 David S. Miller
> > [ 6.155464] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
> > [ 6.212641] ieee80211_crypt: registered algorithm 'NULL'
> > [ 6.215127] ieee80211_crypt: registered algorithm 'TKIP'
> > [ 6.343049] Adding 2988048k swap on /dev/disk/by-uuid/c58cdc7c-b94b-4116-9cca-bf154269e4d8. Priority:-1 extents:1 across:2988048k
> > [ 6.391922] usb 3-2: new full speed USB device using uhci_hcd and address 2
> > [ 5.741741] EXT3 FS on sda1, internal journal
> > [ 6.565336] usb 3-2: configuration #1 chosen from 1 choice
> > [ 5.900025] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
> > [ 6.132611] usb 4-1: new full speed USB device using uhci_hcd and address 2
> > [ 6.324999] usb 4-1: configuration #1 chosen from 1 choice
> > [ 7.019276] input: HID 05ac:1000 as /class/input/input10
> > [ 7.046429] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
> > [ 7.065228] input: HID 05ac:1000 as /class/input/input11
> > [ 7.086132] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
> > [ 6.416101] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
> > [ 6.418848] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
> > [ 6.419743] input: Built-in iSight as /class/input/input12
> > [ 6.446317] usbcore: registered new interface driver uvcvideo
> > [ 6.446323] USB Video Class driver (SVN r198)
> > [ 7.809391] usb 5-4: USB disconnect, address 3
> > [ 9.060971] appletouch: incomplete data package (first byte: 2, length: 4).
> > [ 9.539766] usb 5-4: new high speed USB device using ehci_hcd and address 6
> > [ 9.641888] usb 5-4: configuration #1 chosen from 1 choice
> > [ 9.642174] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
> > [ 9.644653] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
> > [ 9.645339] input: Built-in iSight as /class/input/input13
> > [ 10.138778] input: Pommed beeper device as /class/input/input14
> > [ 10.241566] Bluetooth: Core ver 2.11
> > [ 10.243725] NET: Registered protocol family 31
> > [ 10.243728] Bluetooth: HCI device and connection manager initialized
> > [ 10.243731] Bluetooth: HCI socket layer initialized
> > [ 10.299125] Bluetooth: L2CAP ver 2.9
> > [ 10.299125] Bluetooth: L2CAP socket layer initialized
> > [ 9.675457] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> > [ 9.694644] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
> > [ 10.354197] Bluetooth: RFCOMM socket layer initialized
> > [ 10.354776] Bluetooth: RFCOMM TTY layer initialized
> > [ 10.354779] Bluetooth: RFCOMM ver 1.8
> > [ 10.589269] usb 4-1: USB disconnect, address 2
> > [ 10.824926] usb 4-1: new full speed USB device using uhci_hcd and address 3
> > [ 11.015363] usb 4-1: configuration #1 chosen from 1 choice
> > [ 11.086051] Bluetooth: HCI USB driver ver 2.9
> > [ 11.089237] usbcore: registered new interface driver hci_usb
> > [ 10.603936] CPU0 attaching NULL sched-domain.
> > [ 10.603942] CPU1 attaching NULL sched-domain.
> > [ 10.613659] CPU0 attaching sched-domain:
> > [ 10.613663] domain 0: span 3
> > [ 10.613665] groups: 1 2
> > [ 10.613668] domain 1: span 3
> > [ 10.613669] groups: 3
> > [ 10.613672] CPU1 attaching sched-domain:
> > [ 10.613673] domain 0: span 3
> > [ 10.613675] groups: 2 1
> > [ 10.613677] domain 1: span 3
> > [ 10.613678] groups: 3
> > [ 16.099935] input: Apple Computer, Inc. Mighty Mouse as /class/input/input15
> > [ 20.975690] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 23.378169] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
> > [ 23.378175] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
> > [ 23.378177] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
> > [ 24.167068] [fglrx] interrupt source 20008000 successfully enabled
> > [ 24.167068] [fglrx] enable ID = 0x00000008
> > [ 24.167068] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
> > [ 24.167068] [fglrx] interrupt source 10000000 successfully enabled
> > [ 24.167068] [fglrx] enable ID = 0x00000009
> > [ 24.167068] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
> > [ 144.557848] applesmc: wait status failed: 5 != 4
> > [ 144.358566] applesmc: wait status failed: c != 8
> > [ 144.409864] PM: Syncing filesystems ... done.
> > [ 145.650031] Freezing user space processes ... (elapsed 0.11 seconds) done.
> > [ 145.764634] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> > [ 145.764693] Suspending console(s)
> > [ 145.829398] sd 2:0:1:0: [sda] Synchronizing SCSI cache
> > [ 145.829602] sd 2:0:1:0: [sda] Stopping disk
> > [ 146.795569] ACPI: PCI interrupt for device 0000:03:00.0 disabled
> > [ 146.808867] [fglrx] firegl_gps_setpowerdown .
> > [ 146.840196] ACPI: PCI interrupt for device 0000:01:00.0 disabled
> > [ 146.840417] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
> > [ 146.852207] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
> > [ 146.852379] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
> > [ 146.865455] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
> > [ 146.865501] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
> > [ 146.865547] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
> > [ 146.865591] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
> > [ 146.865795] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> > [ 146.880615] ACPI: Preparing to enter system sleep state S3
> > [ 146.881357] Disabling non-boot CPUs ...
> > [ 146.881373] CPU0 attaching NULL sched-domain.
> > [ 146.881377] CPU1 attaching NULL sched-domain.
> > [ 146.992026] CPU 1 is now offline
> > [ 146.992031] SMP alternatives: switching to UP code
> > [ 146.993980] CPU0 attaching sched-domain:
> > [ 146.993984] domain 0: span 1
> > [ 146.993987] groups: 1
> > [ 146.994265] CPU1 is down
> > [ 146.994265] Intel machine check architecture supported.
> > [ 146.994271] Intel machine check reporting enabled on CPU#0.
> > [ 146.994309] Back to C!
> > [ 146.995386] Enabling non-boot CPUs ...
> > [ 146.995451] CPU0 attaching NULL sched-domain.
> > [ 146.995560] SMP alternatives: switching to SMP code
> > [ 146.998683] Booting processor 1/1 ip 4000
> > [ 147.295547] Initializing CPU#1
> > [ 147.295547] masked ExtINT on CPU#1
> > [ 147.295547] Calibrating delay using timer specific routine.. 4324.69 BogoMIPS (lpj=7204309)
> > [ 147.295547] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 147.295547] CPU: L2 cache: 4096K
> > [ 147.295547] CPU: Physical Processor ID: 0
> > [ 147.295547] CPU: Processor Core ID: 1
> > [ 147.295547] Intel machine check architecture supported.
> > [ 147.295547] Intel machine check reporting enabled on CPU#1.
> > [ 147.092674] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
> > [ 147.092726] CPU0 attaching sched-domain:
> > [ 147.092729] domain 0: span 3
> > [ 147.092730] groups: 1 2
> > [ 147.092732] domain 1: span 3
> > [ 147.092734] groups: 3
> > [ 147.092736] CPU1 attaching sched-domain:
> > [ 147.092737] domain 0: span 3
> > [ 147.092738] groups: 2 1
> > [ 147.092740] domain 1: span 3
> > [ 147.092742] groups: 3
> > [ 147.295547] CPU1 is up
> > [ 147.295552] Switched to NOHz mode on CPU #1
> > [ 147.792197] ACPI: EC: missing OBF confirmation, don't expect it any longer.
> > [ 148.292164] ACPI: EC: missing write data confirmation, don't expect it any longer.
> > [ 148.601213] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b)
> > [ 148.601225] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0)
> > [ 148.601232] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001)
> > [ 148.601239] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030)
> > [ 148.601246] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 3030)
> > [ 148.601253] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100)
> > [ 148.601261] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040)
> > [ 148.601269] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007)
> > [ 148.601300] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 148.601309] PCI: Setting latency timer of device 0000:00:01.0 to 64
> > [ 148.601320] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b)
> > [ 148.601337] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000)
> > [ 148.601346] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002)
> > [ 148.612161] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
> > [ 148.612187] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004)
> > [ 148.612196] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40)
> > [ 148.612206] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
> > [ 148.612236] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
> > [ 148.612247] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> > [ 148.612295] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051)
> > [ 148.612304] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020)
> > [ 148.612312] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 2020)
> > [ 148.612326] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040)
> > [ 148.612336] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
> > [ 148.612388] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
> > [ 148.612397] PCI: Setting latency timer of device 0000:00:1c.0 to 64
> > [ 148.612429] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
> > [ 148.612438] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010)
> > [ 148.612447] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0)
> > [ 148.612460] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040)
> > [ 148.612471] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007)
> > [ 148.612522] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
> > [ 148.612531] PCI: Setting latency timer of device 0000:00:1c.1 to 64
> > [ 148.612563] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801)
> > [ 148.612572] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10)
> > [ 148.612580] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 1010)
> > [ 148.612594] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040)
> > [ 148.612604] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007)
> > [ 148.612656] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
> > [ 148.612664] PCI: Setting latency timer of device 0000:00:1c.2 to 64
> > [ 148.612675] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
> > [ 148.612686] PCI: Setting latency timer of device 0000:00:1d.0 to 64
> > [ 148.612748] usb usb1: root hub lost power or was reset
> > [ 148.612777] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
> > [ 148.612787] PCI: Setting latency timer of device 0000:00:1d.1 to 64
> > [ 148.612848] usb usb2: root hub lost power or was reset
> > [ 148.612871] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> > [ 148.612881] PCI: Setting latency timer of device 0000:00:1d.2 to 64
> > [ 148.612942] usb usb3: root hub lost power or was reset
> > [ 148.612969] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
> > [ 148.612979] PCI: Setting latency timer of device 0000:00:1d.3 to 64
> > [ 148.613041] usb usb4: root hub lost power or was reset
> > [ 148.625479] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
> > [ 148.625490] PCI: Setting latency timer of device 0000:00:1d.7 to 64
> > [ 148.625572] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1)
> > [ 148.625580] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00)
> > [ 148.625589] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 228000f0)
> > [ 148.625606] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007)
> > [ 148.625635] PCI: Setting latency timer of device 0000:00:1e.0 to 64
> > [ 148.625704] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b)
> > [ 148.625736] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005)
> > [ 148.625750] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
> > [ 148.625759] PCI: Setting latency timer of device 0000:00:1f.1 to 64
> > [ 148.638818] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b)
> > [ 148.638851] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)
> > [ 148.638875] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
> > [ 148.638885] PCI: Setting latency timer of device 0000:00:1f.2 to 64
> > [ 148.642171] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> > [ 148.642181] PCI: Setting latency timer of device 0000:01:00.0 to 64
> > [ 148.651132] [fglrx] firegl_gps_setpowerup .
> > [ 148.656530] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b)
> > [ 148.656545] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000)
> > [ 148.656567] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001)
> > [ 148.656579] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004)
> > [ 148.656588] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40)
> > [ 148.656600] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 100007)
> > [ 148.668840] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a)
> > [ 148.668874] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004)
> > [ 148.668884] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40)
> > [ 148.668896] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007)
> > [ 148.668941] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> > [ 148.668952] PCI: Setting latency timer of device 0000:03:00.0 to 64
> > [ 148.685507] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000)
> > [ 148.685516] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000)
> > [ 148.685525] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810)
> > [ 148.685537] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016)
> > [ 148.736588] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
> > [ 148.740881] sd 2:0:1:0: [sda] Starting disk
> > [ 148.708902] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
> > [ 148.708908] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out
> > [ 148.722524] ata3.01: configured for UDMA/100
> > [ 148.939395] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
> > [ 148.939401] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out
> > [ 148.731368] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> > [ 148.731393] sd 2:0:1:0: [sda] Write Protect is off
> > [ 148.731397] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
> > [ 148.731433] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 148.731664] applesmc: device has already been initialized (0xe0, 0x00).
> > [ 149.105985] ata1.00: configured for UDMA/66
> > [ 148.962313] Restarting tasks ... <6>usb 1-2: USB disconnect, address 4
> > [ 149.003406] done.
> > [ 149.068591] Buffer I/O error on device sr0, logical block 356490
> > [ 149.068601] Buffer I/O error on device sr0, logical block 356491
> > [ 149.068606] Buffer I/O error on device sr0, logical block 356492
> > [ 149.068612] Buffer I/O error on device sr0, logical block 356493
> > [ 149.068617] Buffer I/O error on device sr0, logical block 356494
> > [ 149.068621] Buffer I/O error on device sr0, logical block 356495
> > [ 149.068627] Buffer I/O error on device sr0, logical block 356496
> > [ 149.068632] Buffer I/O error on device sr0, logical block 356497
> > [ 149.068637] Buffer I/O error on device sr0, logical block 356498
> > [ 149.068642] Buffer I/O error on device sr0, logical block 356499
> > [ 149.135499] input: appletouch disconnected
> > [ 149.325200] usb 1-2: new full speed USB device using uhci_hcd and address 5
> > [ 149.358524] usb 1-2: configuration #1 chosen from 1 choice
> > [ 149.365428] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input16
> > [ 149.371879] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
> > [ 149.376222] appletouch: Geyser mode initialized.
> > [ 149.376267] input: appletouch as /class/input/input17
> > [ 149.379214] appletouch: incomplete data package (first byte: 2, length: 4).
> > [ 149.384253] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input18
> > [ 149.388556] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
> > [ 149.391464] usb 3-2: USB disconnect, address 2
> > [ 149.591643] usb 3-2: new full speed USB device using uhci_hcd and address 3
> > [ 149.761008] usb 3-2: configuration #1 chosen from 1 choice
> > [ 149.767228] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
> > [ 149.767228] usb 4-1: USB disconnect, address 3
> > [ 150.390816] usb 4-1: new full speed USB device using uhci_hcd and address 4
> > [ 150.874557] usb 4-1: new full speed USB device using uhci_hcd and address 5
> > [ 151.045882] usb 4-1: configuration #1 chosen from 1 choice
> > [ 151.072274] input: HID 05ac:1000 as /class/input/input19
> > [ 151.074648] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
> > [ 151.089934] input: HID 05ac:1000 as /class/input/input20
> > [ 151.089934] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
> > [ 153.773933] printk: 1322 messages suppressed.
> > [ 153.773943] Buffer I/O error on device sr0, logical block 357112
> >
> >
>
--
Justin P. Mattock
^ permalink raw reply [flat|nested] 18+ messages in thread
* macbook pro dvd playback after suspend Buffer I/O error
@ 2008-04-04 19:02 Justin Mattock
0 siblings, 0 replies; 18+ messages in thread
From: Justin Mattock @ 2008-04-04 19:02 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: Type: text/plain, Size: 731 bytes --]
Hello; I posted this on lkml, and forgot to Cc this to here, It seems
if I'm playing a DVD, and then suspend the system as the DVD is still
playing upon wakeup I'm seeing a Buffer I/O error. Attached is dmesg
which will show the error at the bottom. I'm not to sure if this is
software related or kernel related. from the best of my knowledge I am
able to reproduce this error not by just performing a suspend, but by
just inserting a DVD and pressing play with gmplayer(if I wait a few
minutes for the cd player to settle down then the DVD will play) With
previous kernel's 2.6.23 I was able to insert a DVD with gmplayer a
press play without waiting a few seconds and there would be no issue.
regards;
--
Justin P. Mattock
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 62617 bytes --]
[ 0.000000] Linux version 2.6.25-rc8 (root@unix) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Tue Apr 1 23:57:23 UTC 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable)
[ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] 112MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Scan SMP from c0000000 for 1024 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Entering add_active_range(0, 0, 258282) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 258282
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 258282
[ 0.000000] On node 0 totalpages: 258282
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 225 pages used for memmap
[ 0.000000] HighMem zone: 28681 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
[ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
[ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309)
[ 0.000000] ACPI: FACS 3FEC0000, 0040
[ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
[ 0.000000] ACPI: DMI detected: Apple
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256265
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash vga=773 selinux=1 audit=1 enforcing=1 highres=off apic=verbose acpi_osi=Linux pnpacpi=off usbcore.autosuspend=1 pci=routeirq
[ 0.000000] audit: enabled (after initialization)
[ 0.000000] ACPI: Added _OSI(Linux)
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2161.255 MHz processor.
[ 0.003333] Console: colour dummy device 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.003333] Memory: 1019064k/1033128k available (2490k kernel code, 13416k reserved, 959k data, 332k init, 115624k highmem)
[ 0.003333] virtual kernel memory layout:
[ 0.003333] fixmap : 0xfff9a000 - 0xfffff000 ( 404 kB)
[ 0.003333] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.003333] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.003333] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.003333] .init : 0xc0466000 - 0xc04b9000 ( 332 kB)
[ 0.003333] .data : 0xc036e8c8 - 0xc045e740 ( 959 kB)
[ 0.003333] .text : 0xc0100000 - 0xc036e8c8 (2490 kB)
[ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 0.003333] hpet clockevent registered
[ 0.083331] Calibrating delay using timer specific routine.. 4328.69 BogoMIPS (lpj=7210719)
[ 0.083348] Security Framework initialized
[ 0.083351] SELinux: Initializing.
[ 0.083358] SELinux: Starting in enforcing mode
[ 0.083366] selinux_register_security: Registering secondary module capability
[ 0.083368] Capability LSM initialized as secondary
[ 0.083377] Mount-cache hash table entries: 512
[ 0.083484] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.083486] CPU: L2 cache: 4096K
[ 0.083489] CPU: Physical Processor ID: 0
[ 0.083490] CPU: Processor Core ID: 0
[ 0.083492] Intel machine check architecture supported.
[ 0.083495] Intel machine check reporting enabled on CPU#0.
[ 0.083497] using mwait in idle threads.
[ 0.083500] Compat vDSO mapped to ffffe000.
[ 0.083505] Checking 'hlt' instruction... OK.
[ 0.097770] ACPI: Core revision 20070126
[ 0.105392] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 0.105398] enabled ExtINT on CPU#0
[ 0.105407] Booting processor 1/1 ip 4000
[ 0.003333] Initializing CPU#1
[ 0.003333] masked ExtINT on CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 4324.65 BogoMIPS (lpj=7204251)
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 4096K
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] Intel machine check architecture supported.
[ 0.003333] Intel machine check reporting enabled on CPU#1.
[ 0.197373] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 0.197387] Total of 2 processors activated (8652.35 BogoMIPS).
[ 0.197578] ENABLING IO-APIC IRQs
[ 0.197579] init IO_APIC IRQs
[ 0.197581] IO-APIC (apicid-pin) 1-0 not connected.
[ 0.197625] IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
[ 0.197777] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.230814] Using local APIC timer interrupts.
[ 0.230815] calibrating APIC timer ...
[ 0.233318] ... lapic delta = 1039057
[ 0.233318] ... PM timer delta = 357953
[ 0.233318] ... PM timer result ok
[ 0.233318] ..... delta 1039057
[ 0.233318] ..... mult: 44630068
[ 0.233318] ..... calibration result: 554163
[ 0.233318] ..... CPU clock speed is 2161.1523 MHz.
[ 0.233318] ..... host bus clock speed is 166.0885 MHz.
[ 0.233318] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.233334] Brought up 2 CPUs
[ 0.233358] CPU0 attaching sched-domain:
[ 0.233360] domain 0: span 3
[ 0.233362] groups: 1 2
[ 0.233365] CPU1 attaching sched-domain:
[ 0.233366] domain 0: span 3
[ 0.233368] groups: 2 1
[ 0.233604] net_namespace: 452 bytes
[ 0.233613] Booting paravirtualized kernel on bare hardware
[ 0.233781] NET: Registered protocol family 16
[ 0.233952] No dock devices found.
[ 0.234059] EISA bus registered
[ 0.234063] ACPI: bus type pci registered
[ 0.234139] PCI: Using configuration type 1
[ 0.234141] Setting up standard PCI resources
[ 0.236136] ACPI: EC: EC description table is found, configuring boot EC
[ 0.236316] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.239148] ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.239488] ACPI: Interpreter enabled
[ 0.239491] ACPI: (supports S0 S3 S4 S5)
[ 0.239502] ACPI: Using IOAPIC for interrupt routing
[ 0.252698] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.252700] ACPI: EC: driver started in poll mode
[ 0.254869] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.255644] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.255649] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.256495] PCI: Transparent bridge - 0000:00:1e.0
[ 0.256539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.256853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.256970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.257083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.257195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.257315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.263253] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.263349] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.263435] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.263528] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.263615] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.263700] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.263785] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.263870] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.264244] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.264276] pnp: PnP ACPI: disabled
[ 0.264463] SCSI subsystem initialized
[ 0.264521] libata version 3.00 loaded.
[ 0.264627] usbcore: registered new interface driver usbfs
[ 0.264685] usbcore: registered new interface driver hub
[ 0.264739] usbcore: registered new device driver usb
[ 0.264994] PCI: Using ACPI for IRQ routing
[ 0.264997] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
[ 0.265001] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.265004] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.265007] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 0.265011] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.265013] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.265016] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.265019] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 0.265023] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.265025] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.265028] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 0.265031] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 0.265033] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.265036] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.265039] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.265041] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.265044] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.265047] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.265049] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.265052] number of MP IRQ sources: 15.
[ 0.265053] number of IO-APIC #1 registers: 24.
[ 0.265055] testing the IO APIC.......................
[ 0.265063] IO APIC #1......
[ 0.265064] .... register #00: 00000000
[ 0.265066] ....... : physical APIC id: 00
[ 0.265067] ....... : Delivery Type: 0
[ 0.265068] ....... : LTS : 0
[ 0.265069] .... register #01: 00170020
[ 0.265071] ....... : max redirection entries: 0017
[ 0.265072] ....... : PRQ implemented: 0
[ 0.265074] ....... : IO APIC version: 0020
[ 0.265075] .... IRQ redirection table:
[ 0.265076] NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
[ 0.265081] 00 000 00 1 0 0 0 0 0 0 00
[ 0.265087] 01 003 03 0 0 0 0 0 1 1 39
[ 0.265093] 02 003 03 0 0 0 0 0 1 1 31
[ 0.265099] 03 003 03 0 0 0 0 0 1 1 41
[ 0.265105] 04 003 03 0 0 0 0 0 1 1 49
[ 0.265110] 05 003 03 0 0 0 0 0 1 1 51
[ 0.265116] 06 003 03 0 0 0 0 0 1 1 59
[ 0.265122] 07 003 03 0 0 0 0 0 1 1 61
[ 0.265127] 08 003 03 0 0 0 0 0 1 1 69
[ 0.265133] 09 003 03 0 1 0 0 0 1 1 71
[ 0.265139] 0a 003 03 0 0 0 0 0 1 1 79
[ 0.265144] 0b 003 03 0 0 0 0 0 1 1 81
[ 0.265150] 0c 003 03 0 0 0 0 0 1 1 89
[ 0.265156] 0d 003 03 0 0 0 0 0 1 1 91
[ 0.265161] 0e 003 03 0 0 0 0 0 1 1 99
[ 0.265167] 0f 003 03 0 0 0 0 0 1 1 A1
[ 0.265173] 10 003 03 1 1 0 1 0 1 1 A9
[ 0.265179] 11 003 03 1 1 0 1 0 1 1 B9
[ 0.265184] 12 003 03 1 1 0 1 0 1 1 C1
[ 0.265190] 13 003 03 1 1 0 1 0 1 1 D1
[ 0.265196] 14 000 00 1 0 0 0 0 0 0 00
[ 0.265202] 15 000 00 1 0 0 0 0 0 0 00
[ 0.265207] 16 003 03 1 1 0 1 0 1 1 B1
[ 0.265213] 17 003 03 1 1 0 1 0 1 1 C9
[ 0.265215] IRQ to pin mappings:
[ 0.265217] IRQ0 -> 0:2
[ 0.265218] IRQ1 -> 0:1
[ 0.265220] IRQ3 -> 0:3
[ 0.265222] IRQ4 -> 0:4
[ 0.265223] IRQ5 -> 0:5
[ 0.265225] IRQ6 -> 0:6
[ 0.265226] IRQ7 -> 0:7
[ 0.265228] IRQ8 -> 0:8
[ 0.265230] IRQ9 -> 0:9
[ 0.265231] IRQ10 -> 0:10
[ 0.265233] IRQ11 -> 0:11
[ 0.265235] IRQ12 -> 0:12
[ 0.265236] IRQ13 -> 0:13
[ 0.265238] IRQ14 -> 0:14
[ 0.265239] IRQ15 -> 0:15
[ 0.265241] IRQ16 -> 0:16
[ 0.265243] IRQ17 -> 0:17
[ 0.265244] IRQ18 -> 0:18
[ 0.265246] IRQ19 -> 0:19
[ 0.265247] IRQ22 -> 0:22
[ 0.265249] IRQ23 -> 0:23
[ 0.265251] .................................... done.
[ 0.269996] NetLabel: Initializing
[ 0.269997] NetLabel: domain hash size = 128
[ 0.269999] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.270011] NetLabel: unlabeled traffic allowed by default
[ 0.270021] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11
[ 0.270025] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.307160] PCI: Bridge: 0000:00:01.0
[ 0.307162] IO window: 3000-3fff
[ 0.307166] MEM window: 0x50300000-0x503fffff
[ 0.307169] PREFETCH window: 0x0000000040000000-0x0000000047ffffff
[ 0.307173] PCI: Bridge: 0000:00:1c.0
[ 0.307176] IO window: 2000-2fff
[ 0.307181] MEM window: 0x50200000-0x502fffff
[ 0.307186] PREFETCH window: 0x0000000050500000-0x00000000505fffff
[ 0.307193] PCI: Bridge: 0000:00:1c.1
[ 0.307194] IO window: disabled.
[ 0.307199] MEM window: 0x50100000-0x501fffff
[ 0.307203] PREFETCH window: disabled.
[ 0.307210] PCI: Bridge: 0000:00:1c.2
[ 0.307213] IO window: 1000-1fff
[ 0.307218] MEM window: 0x4c100000-0x500fffff
[ 0.307222] PREFETCH window: 0x0000000048000000-0x000000004bffffff
[ 0.307230] PCI: Bridge: 0000:00:1e.0
[ 0.307231] IO window: disabled.
[ 0.307236] MEM window: 0x4c000000-0x4c0fffff
[ 0.307240] PREFETCH window: disabled.
[ 0.307255] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.307260] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.307281] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.307286] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.307308] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.307314] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.307336] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.307341] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.307354] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.307363] NET: Registered protocol family 2
[ 0.320025] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.320209] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.320565] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.320740] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.320743] TCP reno registered
[ 0.094028] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[ 0.094312] audit: initializing netlink socket (enabled)
[ 0.094323] type=2000 audit(1207283385.326:1): initialized
[ 0.094501] highmem bounce pool size: 64 pages
[ 0.094505] Total HugeTLB memory allocated, 0
[ 0.097174] fuse init (API version 7.9)
[ 0.097442] SELinux: Registering netfilter hooks
[ 0.097510] io scheduler noop registered
[ 0.097563] io scheduler cfq registered (default)
[ 0.097660] pci 0000:01:00.0: Boot video device
[ 0.097777] vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 1536k, total 16384k
[ 0.097779] vesafb: mode is 1024x768x8, linelength=1024, pages=18
[ 0.097781] vesafb: protected mode interface info at c000:ad0c
[ 0.097783] vesafb: pmi: set display start = c00cad94, set palette = c00cae50
[ 0.097785] vesafb: scrolling: redraw
[ 0.097787] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 0.097839] fb0: VESA VGA frame buffer device
[ 0.097913] power_supply ADP1: uevent
[ 0.097915] power_supply ADP1: No power supply yet
[ 0.097946] power_supply ADP1: power_supply_changed
[ 0.097951] ACPI: AC Adapter [ADP1] (on-line)
[ 0.097995] power_supply ADP1: power_supply_changed_work
[ 0.097997] power_supply ADP1: power_supply_update_gen_leds 1
[ 0.098003] power_supply ADP1: uevent
[ 0.098004] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 0.098009] power_supply ADP1: Static prop TYPE=Mains
[ 0.098011] power_supply ADP1: 1 dynamic props
[ 0.098013] power_supply ADP1: prop ONLINE=1
[ 0.332231] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.432875] power_supply BAT0: uevent
[ 0.432877] power_supply BAT0: No power supply yet
[ 0.432955] power_supply BAT0: power_supply_changed
[ 0.433020] power_supply BAT0: power_supply_changed_work
[ 0.458794] ACPI: Battery Slot [BAT0] (battery present)
[ 0.463083] hpet_resources: 0xfed00000 is busy
[ 0.463620] loop: module loaded
[ 0.463645] Linux video capture interface: v2.00
[ 0.463871] input: Macintosh mouse button emulation as /class/input/input0
[ 0.464036] Driver 'sd' needs updating - please use bus_type methods
[ 0.464066] Driver 'sr' needs updating - please use bus_type methods
[ 0.464259] ata_piix 0000:00:1f.1: version 2.12
[ 0.464267] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.464300] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 0.464373] scsi0 : ata_piix
[ 0.464457] scsi1 : ata_piix
[ 0.464974] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
[ 0.464977] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
[ 0.488663] power_supply BAT0: power_supply_update_bat_leds 4
[ 0.488669] power_supply BAT0: uevent
[ 0.488670] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 0.488674] power_supply BAT0: Static prop TYPE=Battery
[ 0.488676] power_supply BAT0: 12 dynamic props
[ 0.488678] power_supply BAT0: prop STATUS=Full
[ 0.488681] power_supply BAT0: prop PRESENT=1
[ 0.488683] power_supply BAT0: prop TECHNOLOGY=Unknown
[ 0.488685] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[ 0.488688] power_supply BAT0: prop VOLTAGE_NOW=12453000
[ 0.488690] power_supply BAT0: prop CURRENT_NOW=0
[ 0.488692] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[ 0.488695] power_supply BAT0: prop ENERGY_FULL=53150000
[ 0.488697] power_supply BAT0: prop ENERGY_NOW=51380000
[ 0.488699] power_supply BAT0: prop MODEL_NAME=ASMB012
[ 0.488701] power_supply BAT0: prop MANUFACTURER=SMPN012
[ 0.488703] power_supply BAT0: prop SERIAL_NUMBER=
[ 0.266661] Switched to NOHz mode on CPU #1
[ 0.503310] Switched to NOHz mode on CPU #0
[ 0.280565] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66
[ 0.290514] ata1.00: configured for UDMA/66
[ 0.509974] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5
[ 0.513308] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 0.513308] Uniform CD-ROM driver Revision: 3.20
[ 0.513308] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.513308] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.513308] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.513308] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 0.519983] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 0.520029] scsi2 : ata_piix
[ 0.520107] scsi3 : ata_piix
[ 0.520984] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
[ 0.520987] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
[ 0.539973] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
[ 0.539973] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.543810] ata3.01: configured for UDMA/100
[ 0.553305] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
[ 0.553305] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 0.553305] sd 2:0:1:0: [sda] Write Protect is off
[ 0.553305] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 0.553305] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.553305] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 0.553305] sd 2:0:1:0: [sda] Write Protect is off
[ 0.553305] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 0.553305] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.553305] sda: sda1 sda2 < sda5 >
[ 0.553305] sd 2:0:1:0: [sda] Attached SCSI disk
[ 0.553305] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 0.553305] usbcore: registered new interface driver usblcd
[ 0.553305] usbcore: registered new interface driver usbled
[ 0.553305] PNP: No PS/2 controller found. Probing ports directly.
[ 0.553305] i8042.c: No controller found.
[ 0.560048] mice: PS/2 mouse device common for all mice
[ 0.560112] applesmc: Apple MacBook Pro detected:
[ 0.560114] applesmc: - Model with accelerometer
[ 0.560115] applesmc: - Model with light sensors and backlight
[ 0.560117] applesmc: - Model with 12 temperature sensors
[ 0.560665] applesmc: device has already been initialized (0xe0, 0x00).
[ 0.560667] applesmc: device successfully initialized.
[ 0.560866] applesmc: 2 fans found.
[ 0.561508] input: applesmc as /class/input/input1
[ 0.561570] Registered led device: smc::kbd_backlight
[ 0.561607] applesmc: driver successfully loaded.
[ 0.561675] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 0.561677] EDAC MC: Ver: 2.1.0 Apr 1 2008
[ 0.561874] cpuidle: using governor ladder
[ 0.561876] cpuidle: using governor menu
[ 0.561912] usbcore: registered new interface driver hiddev
[ 0.561945] usbcore: registered new interface driver usbhid
[ 0.561948] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 0.561983] Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
[ 0.561985] ALSA device list:
[ 0.561986] No soundcards found.
[ 0.562041] oprofile: using NMI interrupt.
[ 0.562439] IPVS: Registered protocols (TCP, AH, ESP)
[ 0.562452] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 0.562472] IPVS: ipvs loaded.
[ 0.562473] Initializing XFRM netlink socket
[ 0.562485] NET: Registered protocol family 1
[ 0.562493] NET: Registered protocol family 17
[ 0.562497] NET: Registered protocol family 15
[ 0.562504] Starting balanced_irq
[ 0.562530] Using IPI No-Shortcut mode
[ 0.343320] kjournald starting. Commit interval 5 seconds
[ 0.563305] EXT3-fs: mounted filesystem with ordered data mode.
[ 0.563305] VFS: Mounted root (ext3 filesystem) readonly.
[ 0.563305] Freeing unused kernel memory: 332k freed
[ 0.717700] SELinux:8192 avtab hash slots allocated. Num of rules:203526
[ 0.748552] SELinux:8192 avtab hash slots allocated. Num of rules:203526
[ 0.780144] security: 7 users, 7 roles, 2631 types, 89 bools
[ 0.780147] security: 69 classes, 203526 rules
[ 0.781474] SELinux: Completing initialization.
[ 0.781476] SELinux: Setting up existing superblocks.
[ 0.783291] SELinux: initialized (dev sda1, type ext3), uses xattr
[ 0.783291] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 0.783291] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 0.783291] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 0.783291] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
[ 0.783291] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 0.783291] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
[ 0.783291] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 0.783291] SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
[ 0.783291] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 0.783291] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 0.783291] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 0.783291] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 0.783291] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 0.783291] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 0.783291] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 0.783606] SELinux: policy loaded with handle_unknown=deny
[ 0.783613] type=1403 audit(1207283387.446:2): policy loaded auid=4294967295 ses=4294967295
[ 0.956623] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 0.707038] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 0.958218] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 1.048272] power_supply ADP1: uevent
[ 1.048275] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 1.048279] power_supply ADP1: Static prop TYPE=Mains
[ 1.048281] power_supply ADP1: 1 dynamic props
[ 1.048283] power_supply ADP1: prop ONLINE=1
[ 1.048299] power_supply BAT0: uevent
[ 1.048300] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 1.048303] power_supply BAT0: Static prop TYPE=Battery
[ 1.048305] power_supply BAT0: 12 dynamic props
[ 1.748730] power_supply BAT0: prop STATUS=Full
[ 1.748735] power_supply BAT0: prop PRESENT=1
[ 1.748738] power_supply BAT0: prop TECHNOLOGY=Unknown
[ 1.748741] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[ 1.748743] power_supply BAT0: prop VOLTAGE_NOW=12452000
[ 1.748746] power_supply BAT0: prop CURRENT_NOW=0
[ 1.748748] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[ 1.748750] power_supply BAT0: prop ENERGY_FULL=53150000
[ 1.748753] power_supply BAT0: prop ENERGY_NOW=51380000
[ 1.748755] power_supply BAT0: prop MODEL_NAME=ASMB012
[ 1.748758] power_supply BAT0: prop MANUFACTURER=SMPN012
[ 1.748760] power_supply BAT0: prop SERIAL_NUMBER=
[ 2.259246] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309)
[ 2.259524] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
[ 2.961917] Monitor-Mwait will be used to enter C-1 state
[ 2.961921] Monitor-Mwait will be used to enter C-2 state
[ 2.961923] Monitor-Mwait will be used to enter C-3 state
[ 2.961985] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.962013] ACPI: ACPI0007:00 is registered as cooling_device0
[ 2.962018] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.962360] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
[ 2.962570] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
[ 2.283458] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.283478] ACPI: ACPI0007:01 is registered as cooling_device1
[ 2.283482] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.978015] input: Power Button (FF) as /class/input/input2
[ 3.003200] ACPI: Power Button (FF) [PWRF]
[ 3.003267] input: Lid Switch as /class/input/input3
[ 3.003326] ACPI: Lid Switch [LID0]
[ 3.003373] input: Power Button (CM) as /class/input/input4
[ 3.042126] ACPI: Power Button (CM) [PWRB]
[ 3.042198] input: Sleep Button (CM) as /class/input/input5
[ 3.056493] ACPI: Sleep Button (CM) [SLPB]
[ 3.230052] Linux agpgart interface v0.103
[ 3.307976] USB Universal Host Controller Interface driver v3.0
[ 3.308018] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 3.308029] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.308032] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.308220] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 3.308316] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.308351] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 3.308473] usb usb1: configuration #1 chosen from 1 choice
[ 3.308495] hub 1-0:1.0: USB hub found
[ 3.308501] hub 1-0:1.0: 2 ports detected
[ 3.387181] input: Video Bus as /class/input/input6
[ 3.409815] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.409999] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.410009] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.410013] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.410038] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.410067] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 3.410170] usb usb2: configuration #1 chosen from 1 choice
[ 3.410192] hub 2-0:1.0: USB hub found
[ 3.410198] hub 2-0:1.0: 2 ports detected
[ 3.513241] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.513252] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.513256] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.513279] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.513313] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 3.513418] usb usb3: configuration #1 chosen from 1 choice
[ 3.513440] hub 3-0:1.0: USB hub found
[ 3.513446] hub 3-0:1.0: 2 ports detected
[ 3.619190] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 3.619201] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.619204] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.619228] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.619261] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 3.619367] usb usb4: configuration #1 chosen from 1 choice
[ 3.619390] hub 4-0:1.0: USB hub found
[ 3.619395] hub 4-0:1.0: 2 ports detected
[ 3.636455] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 3.651461] ath_hal: module license 'Proprietary' taints kernel.
[ 3.663223] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
[ 3.683283] wlan: svn r3221
[ 3.711071] ath_pci: svn r3221
[ 3.719918] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 3.719932] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.719935] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.719961] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.723823] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.723829] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.723836] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400
[ 3.759627] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.759731] usb usb5: configuration #1 chosen from 1 choice
[ 3.759756] hub 5-0:1.0: USB hub found
[ 3.759762] hub 5-0:1.0: 8 ports detected
[ 3.853097] Marking TSC unstable due to: TSC halts in idle.
[ 3.183313] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 3.867148] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 3.867171] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 3.893921] hda_codec: STAC922x, Apple subsys_id=106b1e00
[ 3.234477] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 3.931749] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 3.931762] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 4.061648] HAL returned 41 channels.
[ 4.061653] Channel 1 (2412 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
[ 4.061657] Channel 1 (2412 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
[ 4.061660] Channel 2 (2417 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
[ 4.061663] Channel 2 (2417 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
[ 4.061667] Channel 3 (2422 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
[ 4.061670] Channel 3 (2422 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
[ 4.061673] Channel 4 (2427 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
[ 4.061677] Channel 4 (2427 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
[ 4.061680] Channel 5 (2432 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
[ 4.061683] Channel 5 (2432 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
[ 4.061687] Channel 6 (2437 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
[ 4.061690] Channel 6 (2437 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
[ 4.061693] Channel 6 (2437 MHz) Max Tx Power 18 dBm (reg limited) [31 hw 18 reg] Flags CF_TURBO CF_OFDM CF_2GHZ
[ 4.061697] Channel 7 (2442 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
[ 4.061700] Channel 7 (2442 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
[ 4.061703] Channel 8 (2447 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
[ 4.061706] Channel 8 (2447 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
[ 4.061709] Channel 9 (2452 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
[ 4.061713] Channel 9 (2452 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
[ 4.061716] Channel 10 (2457 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
[ 4.061719] Channel 10 (2457 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
[ 4.061722] Channel 11 (2462 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_CCK CF_2GHZ
[ 4.061726] Channel 11 (2462 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_OFDM CF_2GHZ
[ 4.061729] Channel 36 (5180 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
[ 4.061732] Channel 40 (5200 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
[ 4.061736] Channel 42 (5210 MHz) Max Tx Power 15 dBm (reg limited) [31 hw 15 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_STATIC_TURBO
[ 4.061739] Channel 44 (5220 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
[ 4.061742] Channel 48 (5240 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
[ 4.061746] Channel 50 (5250 MHz) Max Tx Power 15 dBm (reg limited) [31 hw 15 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY CF_STATIC_TURBO PF_DFS_REQUIRED
[ 4.061750] Channel 52 (5260 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
[ 4.061754] Channel 56 (5280 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
[ 4.061758] Channel 58 (5290 MHz) Max Tx Power 18 dBm (reg limited) [31 hw 18 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY CF_STATIC_TURBO PF_DFS_REQUIRED
[ 4.061762] Channel 60 (5300 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
[ 4.061766] Channel 64 (5320 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ CF_PASSIVE_SCAN_ONLY PF_DFS_REQUIRED
[ 4.061769] Channel 149 (5745 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
[ 4.061773] Channel 152 (5760 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_STATIC_TURBO
[ 4.061776] Channel 153 (5765 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
[ 4.061779] Channel 157 (5785 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
[ 4.061783] Channel 160 (5800 MHz) Max Tx Power 20 dBm (reg limited) [31 hw 20 reg] Flags CF_TURBO CF_OFDM CF_5GHZ CF_STATIC_TURBO
[ 4.061786] Channel 161 (5805 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
[ 4.061790] Channel 165 (5825 MHz) Max Tx Power 30 dBm (reg limited) [31 hw 30 reg] Flags CF_OFDM CF_5GHZ
[ 4.061792] ath_pci: switching rfkill capability off
[ 4.080224] ath_rate_sample: 1.2 (svn r3221)
[ 4.080224] ath_pci: switching per-packet transmit power control off
[ 4.080224] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 4.080224] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 4.080224] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 4.080224] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 4.080224] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 4.080224] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 4.080224] wifi0: mac 12.10 phy 8.1 radio 12.0
[ 4.080224] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 4.080224] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 4.080224] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 4.080224] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 4.080224] wifi0: Use hw queue 8 for CAB traffic
[ 4.080224] wifi0: Use hw queue 9 for beacons
[ 4.113529] wifi0: Atheros 5418: mem=0x50100000, irq=17
[ 4.258239] usb 1-2: device not accepting address 2, error -71
[ 4.268120] Clocksource tsc unstable (delta = -146744094 ns)
[ 4.717932] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.446532] usb 5-4: new high speed USB device using ehci_hcd and address 3
[ 5.177113] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe2ad87e]
[ 5.254452] usb 5-4: configuration #1 chosen from 1 choice
[ 5.019550] usbcore: registered new interface driver appletouch
[ 5.792179] Symbol init_mm is marked as UNUSED, however this module is using it.
[ 5.792183] This symbol will go away in the future.
[ 5.792185] Please evalute if this is the right api to use, and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
[ 5.808566] [fglrx] Maximum main memory to use for locked dma buffers: 913 MBytes.
[ 5.808594] [fglrx] ASYNCIO init succeed!
[ 5.810559] [fglrx] PAT is enabled successfully!
[ 5.810581] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 5.925496] usb 1-2: new full speed USB device using uhci_hcd and address 4
[ 5.991088] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
[ 5.991091] intelfb: Version 0.9.4
[ 6.039295] Console: switching to colour frame buffer device 128x48
[ 6.087454] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.413970] usb 1-2: configuration #1 chosen from 1 choice
[ 5.420713] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7
[ 5.445334] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 5.450550] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 6.137835] appletouch: Geyser mode initialized.
[ 6.137893] input: appletouch as /class/input/input8
[ 6.155056] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input9
[ 6.155056] arp_tables: (C) 2002 David S. Miller
[ 6.155464] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 6.212641] ieee80211_crypt: registered algorithm 'NULL'
[ 6.215127] ieee80211_crypt: registered algorithm 'TKIP'
[ 6.343049] Adding 2988048k swap on /dev/disk/by-uuid/c58cdc7c-b94b-4116-9cca-bf154269e4d8. Priority:-1 extents:1 across:2988048k
[ 6.391922] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 5.741741] EXT3 FS on sda1, internal journal
[ 6.565336] usb 3-2: configuration #1 chosen from 1 choice
[ 5.900025] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
[ 6.132611] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 6.324999] usb 4-1: configuration #1 chosen from 1 choice
[ 7.019276] input: HID 05ac:1000 as /class/input/input10
[ 7.046429] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 7.065228] input: HID 05ac:1000 as /class/input/input11
[ 7.086132] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 6.416101] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 6.418848] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 6.419743] input: Built-in iSight as /class/input/input12
[ 6.446317] usbcore: registered new interface driver uvcvideo
[ 6.446323] USB Video Class driver (SVN r198)
[ 7.809391] usb 5-4: USB disconnect, address 3
[ 9.060971] appletouch: incomplete data package (first byte: 2, length: 4).
[ 9.539766] usb 5-4: new high speed USB device using ehci_hcd and address 6
[ 9.641888] usb 5-4: configuration #1 chosen from 1 choice
[ 9.642174] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 9.644653] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 9.645339] input: Built-in iSight as /class/input/input13
[ 10.138778] input: Pommed beeper device as /class/input/input14
[ 10.241566] Bluetooth: Core ver 2.11
[ 10.243725] NET: Registered protocol family 31
[ 10.243728] Bluetooth: HCI device and connection manager initialized
[ 10.243731] Bluetooth: HCI socket layer initialized
[ 10.299125] Bluetooth: L2CAP ver 2.9
[ 10.299125] Bluetooth: L2CAP socket layer initialized
[ 9.675457] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 9.694644] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[ 10.354197] Bluetooth: RFCOMM socket layer initialized
[ 10.354776] Bluetooth: RFCOMM TTY layer initialized
[ 10.354779] Bluetooth: RFCOMM ver 1.8
[ 10.589269] usb 4-1: USB disconnect, address 2
[ 10.824926] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 11.015363] usb 4-1: configuration #1 chosen from 1 choice
[ 11.086051] Bluetooth: HCI USB driver ver 2.9
[ 11.089237] usbcore: registered new interface driver hci_usb
[ 10.603936] CPU0 attaching NULL sched-domain.
[ 10.603942] CPU1 attaching NULL sched-domain.
[ 10.613659] CPU0 attaching sched-domain:
[ 10.613663] domain 0: span 3
[ 10.613665] groups: 1 2
[ 10.613668] domain 1: span 3
[ 10.613669] groups: 3
[ 10.613672] CPU1 attaching sched-domain:
[ 10.613673] domain 0: span 3
[ 10.613675] groups: 2 1
[ 10.613677] domain 1: span 3
[ 10.613678] groups: 3
[ 16.099935] input: Apple Computer, Inc. Mighty Mouse as /class/input/input15
[ 20.975690] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 23.378169] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 23.378175] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[ 23.378177] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 24.167068] [fglrx] interrupt source 20008000 successfully enabled
[ 24.167068] [fglrx] enable ID = 0x00000008
[ 24.167068] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 24.167068] [fglrx] interrupt source 10000000 successfully enabled
[ 24.167068] [fglrx] enable ID = 0x00000009
[ 24.167068] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 144.557848] applesmc: wait status failed: 5 != 4
[ 144.358566] applesmc: wait status failed: c != 8
[ 144.409864] PM: Syncing filesystems ... done.
[ 145.650031] Freezing user space processes ... (elapsed 0.11 seconds) done.
[ 145.764634] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 145.764693] Suspending console(s)
[ 145.829398] sd 2:0:1:0: [sda] Synchronizing SCSI cache
[ 145.829602] sd 2:0:1:0: [sda] Stopping disk
[ 146.795569] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 146.808867] [fglrx] firegl_gps_setpowerdown .
[ 146.840196] ACPI: PCI interrupt for device 0000:01:00.0 disabled
[ 146.840417] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 146.852207] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 146.852379] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 146.865455] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 146.865501] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 146.865547] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 146.865591] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 146.865795] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 146.880615] ACPI: Preparing to enter system sleep state S3
[ 146.881357] Disabling non-boot CPUs ...
[ 146.881373] CPU0 attaching NULL sched-domain.
[ 146.881377] CPU1 attaching NULL sched-domain.
[ 146.992026] CPU 1 is now offline
[ 146.992031] SMP alternatives: switching to UP code
[ 146.993980] CPU0 attaching sched-domain:
[ 146.993984] domain 0: span 1
[ 146.993987] groups: 1
[ 146.994265] CPU1 is down
[ 146.994265] Intel machine check architecture supported.
[ 146.994271] Intel machine check reporting enabled on CPU#0.
[ 146.994309] Back to C!
[ 146.995386] Enabling non-boot CPUs ...
[ 146.995451] CPU0 attaching NULL sched-domain.
[ 146.995560] SMP alternatives: switching to SMP code
[ 146.998683] Booting processor 1/1 ip 4000
[ 147.295547] Initializing CPU#1
[ 147.295547] masked ExtINT on CPU#1
[ 147.295547] Calibrating delay using timer specific routine.. 4324.69 BogoMIPS (lpj=7204309)
[ 147.295547] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 147.295547] CPU: L2 cache: 4096K
[ 147.295547] CPU: Physical Processor ID: 0
[ 147.295547] CPU: Processor Core ID: 1
[ 147.295547] Intel machine check architecture supported.
[ 147.295547] Intel machine check reporting enabled on CPU#1.
[ 147.092674] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 147.092726] CPU0 attaching sched-domain:
[ 147.092729] domain 0: span 3
[ 147.092730] groups: 1 2
[ 147.092732] domain 1: span 3
[ 147.092734] groups: 3
[ 147.092736] CPU1 attaching sched-domain:
[ 147.092737] domain 0: span 3
[ 147.092738] groups: 2 1
[ 147.092740] domain 1: span 3
[ 147.092742] groups: 3
[ 147.295547] CPU1 is up
[ 147.295552] Switched to NOHz mode on CPU #1
[ 147.792197] ACPI: EC: missing OBF confirmation, don't expect it any longer.
[ 148.292164] ACPI: EC: missing write data confirmation, don't expect it any longer.
[ 148.601213] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b)
[ 148.601225] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0)
[ 148.601232] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001)
[ 148.601239] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030)
[ 148.601246] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 3030)
[ 148.601253] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100)
[ 148.601261] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040)
[ 148.601269] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007)
[ 148.601300] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 148.601309] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 148.601320] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b)
[ 148.601337] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000)
[ 148.601346] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002)
[ 148.612161] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
[ 148.612187] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004)
[ 148.612196] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40)
[ 148.612206] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 148.612236] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 148.612247] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 148.612295] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051)
[ 148.612304] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020)
[ 148.612312] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 2020)
[ 148.612326] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040)
[ 148.612336] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
[ 148.612388] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 148.612397] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 148.612429] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
[ 148.612438] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010)
[ 148.612447] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0)
[ 148.612460] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040)
[ 148.612471] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007)
[ 148.612522] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 148.612531] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 148.612563] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801)
[ 148.612572] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10)
[ 148.612580] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 1010)
[ 148.612594] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040)
[ 148.612604] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007)
[ 148.612656] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 148.612664] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 148.612675] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 148.612686] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 148.612748] usb usb1: root hub lost power or was reset
[ 148.612777] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 148.612787] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 148.612848] usb usb2: root hub lost power or was reset
[ 148.612871] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 148.612881] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 148.612942] usb usb3: root hub lost power or was reset
[ 148.612969] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 148.612979] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 148.613041] usb usb4: root hub lost power or was reset
[ 148.625479] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 148.625490] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 148.625572] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1)
[ 148.625580] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00)
[ 148.625589] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 228000f0)
[ 148.625606] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007)
[ 148.625635] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 148.625704] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b)
[ 148.625736] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005)
[ 148.625750] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 148.625759] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 148.638818] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b)
[ 148.638851] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)
[ 148.638875] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 148.638885] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 148.642171] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 148.642181] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 148.651132] [fglrx] firegl_gps_setpowerup .
[ 148.656530] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b)
[ 148.656545] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000)
[ 148.656567] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001)
[ 148.656579] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004)
[ 148.656588] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40)
[ 148.656600] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 100007)
[ 148.668840] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a)
[ 148.668874] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004)
[ 148.668884] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40)
[ 148.668896] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007)
[ 148.668941] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 148.668952] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 148.685507] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000)
[ 148.685516] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000)
[ 148.685525] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810)
[ 148.685537] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016)
[ 148.736588] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 148.740881] sd 2:0:1:0: [sda] Starting disk
[ 148.708902] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
[ 148.708908] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out
[ 148.722524] ata3.01: configured for UDMA/100
[ 148.939395] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 148.939401] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out
[ 148.731368] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 148.731393] sd 2:0:1:0: [sda] Write Protect is off
[ 148.731397] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 148.731433] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 148.731664] applesmc: device has already been initialized (0xe0, 0x00).
[ 149.105985] ata1.00: configured for UDMA/66
[ 148.962313] Restarting tasks ... <6>usb 1-2: USB disconnect, address 4
[ 149.003406] done.
[ 149.068591] Buffer I/O error on device sr0, logical block 356490
[ 149.068601] Buffer I/O error on device sr0, logical block 356491
[ 149.068606] Buffer I/O error on device sr0, logical block 356492
[ 149.068612] Buffer I/O error on device sr0, logical block 356493
[ 149.068617] Buffer I/O error on device sr0, logical block 356494
[ 149.068621] Buffer I/O error on device sr0, logical block 356495
[ 149.068627] Buffer I/O error on device sr0, logical block 356496
[ 149.068632] Buffer I/O error on device sr0, logical block 356497
[ 149.068637] Buffer I/O error on device sr0, logical block 356498
[ 149.068642] Buffer I/O error on device sr0, logical block 356499
[ 149.135499] input: appletouch disconnected
[ 149.325200] usb 1-2: new full speed USB device using uhci_hcd and address 5
[ 149.358524] usb 1-2: configuration #1 chosen from 1 choice
[ 149.365428] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input16
[ 149.371879] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 149.376222] appletouch: Geyser mode initialized.
[ 149.376267] input: appletouch as /class/input/input17
[ 149.379214] appletouch: incomplete data package (first byte: 2, length: 4).
[ 149.384253] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input18
[ 149.388556] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 149.391464] usb 3-2: USB disconnect, address 2
[ 149.591643] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 149.761008] usb 3-2: configuration #1 chosen from 1 choice
[ 149.767228] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
[ 149.767228] usb 4-1: USB disconnect, address 3
[ 150.390816] usb 4-1: new full speed USB device using uhci_hcd and address 4
[ 150.874557] usb 4-1: new full speed USB device using uhci_hcd and address 5
[ 151.045882] usb 4-1: configuration #1 chosen from 1 choice
[ 151.072274] input: HID 05ac:1000 as /class/input/input19
[ 151.074648] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 151.089934] input: HID 05ac:1000 as /class/input/input20
[ 151.089934] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 153.773933] printk: 1322 messages suppressed.
[ 153.773943] Buffer I/O error on device sr0, logical block 357112
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-04-04 8:21 ` macbook pro dvd playback after suspend Buffer I/O error Andrew Morton
2008-04-04 15:05 ` Justin Mattock
@ 2008-06-11 2:00 ` Tejun Heo
2008-06-11 7:45 ` Justin Mattock
1 sibling, 1 reply; 18+ messages in thread
From: Tejun Heo @ 2008-06-11 2:00 UTC (permalink / raw)
To: Andrew Morton; +Cc: Justin Mattock, linux-kernel, linux-ide
Andrew Morton wrote:
> On Fri, 4 Apr 2008 05:07:45 +0000 "Justin Mattock" <justinmattock@gmail.com> wrote:
>
>> When playing a DVD and then suspending the system while the DVD is
>> still in play, upon wakeup I'm receiving a Buffer I/O error on device
>> sr0, logical block 356490.
>> the DVD will continue to play but then gmplayer complains: Warning!
>> FPS changed 23.976 -> 29.970 (-5.994005) [4] then the video becomes
>> very choppy. When looking at osx in the same test the DVD will be
>> paused until the cd player aligns itself, then playback will start.
>> With looking further at this I think this is an issue of a library or
>> codec, So with this in mind is there a package that I might look at to
>> see if this resolves the issue. Attached is dmesg of the Buffer I/O
>> regards;
>
> An ata thing, I assume. Let's cc linux-ide.
>
> Is this new behaviour in 2.6.25-rc8, or were earlier kernels OK?
This is due to UNIT ATTENTION condition triggered by reset during
resume. The following patches should fix it.
http://marc.info/?l=linux-ide&m=121309016918976&w=2
http://marc.info/?l=linux-ide&m=121309016918979&w=2
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-06-11 2:00 ` Tejun Heo
@ 2008-06-11 7:45 ` Justin Mattock
2008-06-11 18:31 ` Justin Mattock
0 siblings, 1 reply; 18+ messages in thread
From: Justin Mattock @ 2008-06-11 7:45 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
On Wed, Jun 11, 2008 at 2:00 AM, Tejun Heo <htejun@gmail.com> wrote:
> Andrew Morton wrote:
>> On Fri, 4 Apr 2008 05:07:45 +0000 "Justin Mattock" <justinmattock@gmail.com> wrote:
>>
>>> When playing a DVD and then suspending the system while the DVD is
>>> still in play, upon wakeup I'm receiving a Buffer I/O error on device
>>> sr0, logical block 356490.
>>> the DVD will continue to play but then gmplayer complains: Warning!
>>> FPS changed 23.976 -> 29.970 (-5.994005) [4] then the video becomes
>>> very choppy. When looking at osx in the same test the DVD will be
>>> paused until the cd player aligns itself, then playback will start.
>>> With looking further at this I think this is an issue of a library or
>>> codec, So with this in mind is there a package that I might look at to
>>> see if this resolves the issue. Attached is dmesg of the Buffer I/O
>>> regards;
>>
>> An ata thing, I assume. Let's cc linux-ide.
>>
>> Is this new behaviour in 2.6.25-rc8, or were earlier kernels OK?
>
> This is due to UNIT ATTENTION condition triggered by reset during
> resume. The following patches should fix it.
>
> http://marc.info/?l=linux-ide&m=121309016918976&w=2
> http://marc.info/?l=linux-ide&m=121309016918979&w=2
>
> Thanks.
>
> --
> tejun
>
alright!! I'll give that a test and see; give me some time right now
it's midnight, and a couple of beer's in; so doing anything that
requires
thinking isn't going to happen, but tomorrow it will.
regards;
--
Justin P. Mattock
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-06-11 7:45 ` Justin Mattock
@ 2008-06-11 18:31 ` Justin Mattock
2008-06-11 21:51 ` Tejun Heo
0 siblings, 1 reply; 18+ messages in thread
From: Justin Mattock @ 2008-06-11 18:31 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
On Wed, Jun 11, 2008 at 7:45 AM, Justin Mattock <justinmattock@gmail.com> wrote:
> On Wed, Jun 11, 2008 at 2:00 AM, Tejun Heo <htejun@gmail.com> wrote:
>> Andrew Morton wrote:
>>> On Fri, 4 Apr 2008 05:07:45 +0000 "Justin Mattock" <justinmattock@gmail.com> wrote:
>>>
>>>> When playing a DVD and then suspending the system while the DVD is
>>>> still in play, upon wakeup I'm receiving a Buffer I/O error on device
>>>> sr0, logical block 356490.
>>>> the DVD will continue to play but then gmplayer complains: Warning!
>>>> FPS changed 23.976 -> 29.970 (-5.994005) [4] then the video becomes
>>>> very choppy. When looking at osx in the same test the DVD will be
>>>> paused until the cd player aligns itself, then playback will start.
>>>> With looking further at this I think this is an issue of a library or
>>>> codec, So with this in mind is there a package that I might look at to
>>>> see if this resolves the issue. Attached is dmesg of the Buffer I/O
>>>> regards;
>>>
>>> An ata thing, I assume. Let's cc linux-ide.
>>>
>>> Is this new behaviour in 2.6.25-rc8, or were earlier kernels OK?
>>
>> This is due to UNIT ATTENTION condition triggered by reset during
>> resume. The following patches should fix it.
>>
>> http://marc.info/?l=linux-ide&m=121309016918976&w=2
>> http://marc.info/?l=linux-ide&m=121309016918979&w=2
>>
>> Thanks.
>>
>> --
>> tejun
>>
>
> alright!! I'll give that a test and see; give me some time right now
> it's midnight, and a couple of beer's in; so doing anything that
> requires
> thinking isn't going to happen, but tomorrow it will.
> regards;
>
> --
> Justin P. Mattock
>
O.K. I applied the patch here is what I'm seeing:
[ 920.237141] end_request: I/O error, dev sr0, sector 2931560
[ 920.237141] Buffer I/O error on device sr0, logical block 366445
[ 920.237141] Buffer I/O error on device sr0, logical block 366446
[ 920.237141] Buffer I/O error on device sr0, logical block 366447
[ 920.237141] Buffer I/O error on device sr0, logical block 366448
[ 920.237141] Buffer I/O error on device sr0, logical block 366449
[ 920.237141] Buffer I/O error on device sr0, logical block 366450
[ 920.237141] Buffer I/O error on device sr0, logical block 366451
[ 920.237141] Buffer I/O error on device sr0, logical block 366452
[ 920.237141] Buffer I/O error on device sr0, logical block 366453
[ 920.237141] Buffer I/O error on device sr0, logical block 366454
[ 925.431105] __ratelimit: 10100 messages suppressed
[ 925.431118] Buffer I/O error on device sr0, logical block 371516
[ 930.772658] __ratelimit: 2407 messages suppressed
[ 930.772658] Buffer I/O error on device sr0, logical block 372720
[ 935.674943] __ratelimit: 6995 messages suppressed
[ 935.674955] Buffer I/O error on device sr0, logical block 376218
[ 940.685317] __ratelimit: 16949 messages suppressed
[ 940.685329] Buffer I/O error on device sr0, logical block 384693
[ 945.770547] __ratelimit: 17881 messages suppressed
[ 945.770558] Buffer I/O error on device sr0, logical block 393634
[ 950.777243] __ratelimit: 19031 messages suppressed
[ 950.777243] Buffer I/O error on device sr0, logical block 403150
[ 955.788427] __ratelimit: 19035 messages suppressed
[ 955.788439] Buffer I/O error on device sr0, logical block 412668
[ 961.575327] __ratelimit: 16603 messages suppressed
[ 961.575338] Buffer I/O error on device sr0, logical block 420970
[ 1006.919733] __ratelimit: 9315 messages suppressed
Almost as if the drive is taking to long to think, by then the cache
has run out, and the FPS changes,
the movie itself doesn't become choppy like before, just freezes.
If you have any other ideas I'm up for that to see.
regards;
--
Justin P. Mattock
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-06-11 18:31 ` Justin Mattock
@ 2008-06-11 21:51 ` Tejun Heo
2008-06-11 22:27 ` Justin Mattock
0 siblings, 1 reply; 18+ messages in thread
From: Tejun Heo @ 2008-06-11 21:51 UTC (permalink / raw)
To: Justin Mattock; +Cc: Andrew Morton, linux-kernel, linux-ide
Justin Mattock wrote:
> O.K. I applied the patch here is what I'm seeing:
>
> [ 920.237141] end_request: I/O error, dev sr0, sector 2931560
> [ 920.237141] Buffer I/O error on device sr0, logical block 366445
> [ 920.237141] Buffer I/O error on device sr0, logical block 366446
> [ 920.237141] Buffer I/O error on device sr0, logical block 366447
> [ 920.237141] Buffer I/O error on device sr0, logical block 366448
> [ 920.237141] Buffer I/O error on device sr0, logical block 366449
> [ 920.237141] Buffer I/O error on device sr0, logical block 366450
> [ 920.237141] Buffer I/O error on device sr0, logical block 366451
> [ 920.237141] Buffer I/O error on device sr0, logical block 366452
> [ 920.237141] Buffer I/O error on device sr0, logical block 366453
> [ 920.237141] Buffer I/O error on device sr0, logical block 366454
> [ 925.431105] __ratelimit: 10100 messages suppressed
> [ 925.431118] Buffer I/O error on device sr0, logical block 371516
> [ 930.772658] __ratelimit: 2407 messages suppressed
> [ 930.772658] Buffer I/O error on device sr0, logical block 372720
> [ 935.674943] __ratelimit: 6995 messages suppressed
> [ 935.674955] Buffer I/O error on device sr0, logical block 376218
> [ 940.685317] __ratelimit: 16949 messages suppressed
> [ 940.685329] Buffer I/O error on device sr0, logical block 384693
> [ 945.770547] __ratelimit: 17881 messages suppressed
> [ 945.770558] Buffer I/O error on device sr0, logical block 393634
> [ 950.777243] __ratelimit: 19031 messages suppressed
> [ 950.777243] Buffer I/O error on device sr0, logical block 403150
> [ 955.788427] __ratelimit: 19035 messages suppressed
> [ 955.788439] Buffer I/O error on device sr0, logical block 412668
> [ 961.575327] __ratelimit: 16603 messages suppressed
> [ 961.575338] Buffer I/O error on device sr0, logical block 420970
> [ 1006.919733] __ratelimit: 9315 messages suppressed
>
> Almost as if the drive is taking to long to think, by then the cache
> has run out, and the FPS changes,
> the movie itself doesn't become choppy like before, just freezes.
> If you have any other ideas I'm up for that to see.
> regards;
Eh.... strange. Can you post full kernel log? And does the dvd work if
you restart playing?
--
tejun
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-06-11 21:51 ` Tejun Heo
@ 2008-06-11 22:27 ` Justin Mattock
2008-06-12 1:18 ` Tejun Heo
0 siblings, 1 reply; 18+ messages in thread
From: Justin Mattock @ 2008-06-11 22:27 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
[-- Attachment #1: Type: text/plain, Size: 2769 bytes --]
On Wed, Jun 11, 2008 at 9:51 PM, Tejun Heo <htejun@gmail.com> wrote:
> Justin Mattock wrote:
>> O.K. I applied the patch here is what I'm seeing:
>>
>> [ 920.237141] end_request: I/O error, dev sr0, sector 2931560
>> [ 920.237141] Buffer I/O error on device sr0, logical block 366445
>> [ 920.237141] Buffer I/O error on device sr0, logical block 366446
>> [ 920.237141] Buffer I/O error on device sr0, logical block 366447
>> [ 920.237141] Buffer I/O error on device sr0, logical block 366448
>> [ 920.237141] Buffer I/O error on device sr0, logical block 366449
>> [ 920.237141] Buffer I/O error on device sr0, logical block 366450
>> [ 920.237141] Buffer I/O error on device sr0, logical block 366451
>> [ 920.237141] Buffer I/O error on device sr0, logical block 366452
>> [ 920.237141] Buffer I/O error on device sr0, logical block 366453
>> [ 920.237141] Buffer I/O error on device sr0, logical block 366454
>> [ 925.431105] __ratelimit: 10100 messages suppressed
>> [ 925.431118] Buffer I/O error on device sr0, logical block 371516
>> [ 930.772658] __ratelimit: 2407 messages suppressed
>> [ 930.772658] Buffer I/O error on device sr0, logical block 372720
>> [ 935.674943] __ratelimit: 6995 messages suppressed
>> [ 935.674955] Buffer I/O error on device sr0, logical block 376218
>> [ 940.685317] __ratelimit: 16949 messages suppressed
>> [ 940.685329] Buffer I/O error on device sr0, logical block 384693
>> [ 945.770547] __ratelimit: 17881 messages suppressed
>> [ 945.770558] Buffer I/O error on device sr0, logical block 393634
>> [ 950.777243] __ratelimit: 19031 messages suppressed
>> [ 950.777243] Buffer I/O error on device sr0, logical block 403150
>> [ 955.788427] __ratelimit: 19035 messages suppressed
>> [ 955.788439] Buffer I/O error on device sr0, logical block 412668
>> [ 961.575327] __ratelimit: 16603 messages suppressed
>> [ 961.575338] Buffer I/O error on device sr0, logical block 420970
>> [ 1006.919733] __ratelimit: 9315 messages suppressed
>>
>> Almost as if the drive is taking to long to think, by then the cache
>> has run out, and the FPS changes,
>> the movie itself doesn't become choppy like before, just freezes.
>> If you have any other ideas I'm up for that to see.
>> regards;
>
> Eh.... strange. Can you post full kernel log? And does the dvd work if
> you restart playing?
>
> --
> tejun
>
O.K. attached is dmesg of playing a dvd, then suspending and wakingup,
as well as starting after the buffer error.(audit messages)
This is interesting, even pausing the dvd before suspending, causes
the same error.
I sent a post to mplayer-users to see if there is a way to have
mplayer pause and wait for the disk drive to align, but am still
waiting
for a response.
regards.
--
Justin P. Mattock
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 52468 bytes --]
[ 0.000000] Linux version 2.6.26-rc5-00016-g91cc75d (root@unix) (gcc version 4.2.3 (Debian 4.2.3-3)) #10 SMP Wed Jun 11 17:47:09 UTC 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable)
[ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] 112MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 258282) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 258282
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 258282
[ 0.000000] On node 0 totalpages: 258282
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 226 pages used for memmap
[ 0.000000] HighMem zone: 28680 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
[ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
[ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309)
[ 0.000000] ACPI: FACS 3FEC0000, 0040
[ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
[ 0.000000] ACPI: DMI detected: Apple
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 46760 bytes of per cpu data
[ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256264
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash vga=773 selinux=1 audit=1 enforcing=1 debug acpi_osi=Linux pnpacpi=off pci=routeirq usbcore.autosuspend=1 nmi_watchdog=0
[ 0.000000] audit: enabled (after initialization)
[ 0.000000] ACPI: Added _OSI(Linux)
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Detected 2161.429 MHz processor.
[ 0.010000] Console: colour dummy device 80x25
[ 0.010000] console [tty0] enabled
[ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.010000] Memory: 1018712k/1033128k available (2556k kernel code, 13800k reserved, 1279k data, 328k init, 115624k highmem)
[ 0.010000] virtual kernel memory layout:
[ 0.010000] fixmap : 0xfff7e000 - 0xfffff000 ( 516 kB)
[ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.010000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.010000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.010000] .init : 0xc04c5000 - 0xc0517000 ( 328 kB)
[ 0.010000] .data : 0xc037f06d - 0xc04bedac (1279 kB)
[ 0.010000] .text : 0xc0100000 - 0xc037f06d (2556 kB)
[ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.010000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.010000] hpet clockevent registered
[ 0.159747] Calibrating delay using timer specific routine.. 4327.95 BogoMIPS (lpj=21639774)
[ 0.159837] Security Framework initialized
[ 0.159849] SELinux: Initializing.
[ 0.159872] SELinux: Starting in enforcing mode
[ 0.159885] selinux_register_security: Registering secondary module capability
[ 0.159897] Capability LSM initialized as secondary
[ 0.159942] Mount-cache hash table entries: 512
[ 0.160000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.160000] CPU: L2 cache: 4096K
[ 0.160000] CPU: Physical Processor ID: 0
[ 0.160000] CPU: Processor Core ID: 0
[ 0.160000] Intel machine check architecture supported.
[ 0.160000] Intel machine check reporting enabled on CPU#0.
[ 0.160000] using mwait in idle threads.
[ 0.160000] Checking 'hlt' instruction... OK.
[ 0.200000] ACPI: Core revision 20080321
[ 0.228302] ENABLING IO-APIC IRQs
[ 0.228526] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.328513] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 0.330000] Booting processor 1/1 ip 6000
[ 0.340000] Initializing CPU#1
[ 0.340000] Calibrating delay using timer specific routine.. 4322.58 BogoMIPS (lpj=21612913)
[ 0.340000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.340000] CPU: L2 cache: 4096K
[ 0.340000] CPU: Physical Processor ID: 0
[ 0.340000] CPU: Processor Core ID: 1
[ 0.340000] Intel machine check architecture supported.
[ 0.340000] Intel machine check reporting enabled on CPU#1.
[ 0.490000] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 0.490000] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.490038] Brought up 2 CPUs
[ 0.490047] Total of 2 processors activated (8650.53 BogoMIPS).
[ 0.490082] CPU0 attaching sched-domain:
[ 0.490092] domain 0: span 0-1
[ 0.490099] groups: 0 1
[ 0.490115] CPU1 attaching sched-domain:
[ 0.490124] domain 0: span 0-1
[ 0.490132] groups: 1 0
[ 0.500000] net_namespace: 516 bytes
[ 0.500000] Booting paravirtualized kernel on bare hardware
[ 0.500000] NET: Registered protocol family 16
[ 0.500000] No dock devices found.
[ 0.500000] EISA bus registered
[ 0.500000] ACPI: bus type pci registered
[ 0.500000] PCI: Using configuration type 1 for base access
[ 0.500000] Setting up standard PCI resources
[ 0.510000] ACPI: EC: EC description table is found, configuring boot EC
[ 0.510000] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.530000] ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.531624] ACPI: Interpreter enabled
[ 0.531635] ACPI: (supports S0 S3 S4 S5)
[ 0.531760] ACPI: Using IOAPIC for interrupt routing
[ 0.580000] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.580000] ACPI: EC: driver started in interrupt mode
[ 0.580000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.580000] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.580000] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.580000] PCI: Transparent bridge - 0000:00:1e.0
[ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.581001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.581991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.585505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.632479] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.632479] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.632479] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.632479] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.632479] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.632479] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.632479] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.632479] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.632479] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.632479] pnp: PnP ACPI: disabled
[ 0.632480] SCSI subsystem initialized
[ 0.632480] libata version 3.00 loaded.
[ 0.632480] usbcore: registered new interface driver usbfs
[ 0.632480] usbcore: registered new interface driver hub
[ 0.632480] usbcore: registered new device driver usb
[ 0.642479] PCI: Using ACPI for IRQ routing
[ 0.642479] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
[ 0.642479] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.642479] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.642479] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 0.642479] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.642479] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.642479] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.642479] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 0.642479] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.642479] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.642479] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 0.642479] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 0.642479] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.642479] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.642479] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.642479] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.642479] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.642479] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.642479] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.662242] NetLabel: Initializing
[ 0.662251] NetLabel: domain hash size = 128
[ 0.662258] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.662402] NetLabel: unlabeled traffic allowed by default
[ 0.662421] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.662436] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.671096] Switched to high resolution mode on CPU 0
[ 0.673809] Switched to high resolution mode on CPU 1
[ 0.714955] PCI: Bridge: 0000:00:01.0
[ 0.714955] IO window: 3000-3fff
[ 0.714955] MEM window: 0x50300000-0x503fffff
[ 0.714955] PREFETCH window: 0x0000000040000000-0x0000000047ffffff
[ 0.714955] PCI: Bridge: 0000:00:1c.0
[ 0.714955] IO window: 2000-2fff
[ 0.714955] MEM window: 0x50200000-0x502fffff
[ 0.714955] PREFETCH window: 0x0000000050500000-0x00000000505fffff
[ 0.714955] PCI: Bridge: 0000:00:1c.1
[ 0.714955] IO window: disabled.
[ 0.714955] MEM window: 0x50100000-0x501fffff
[ 0.714955] PREFETCH window: disabled.
[ 0.714955] PCI: Bridge: 0000:00:1c.2
[ 0.714955] IO window: 1000-1fff
[ 0.714955] MEM window: 0x4c100000-0x500fffff
[ 0.714955] PREFETCH window: 0x0000000048000000-0x000000004bffffff
[ 0.714955] PCI: Bridge: 0000:00:1e.0
[ 0.714955] IO window: disabled.
[ 0.714955] MEM window: 0x4c000000-0x4c0fffff
[ 0.714955] PREFETCH window: disabled.
[ 0.714955] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.714955] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.714955] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.714955] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.714955] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.714955] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.714955] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.714955] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.714955] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.714955] NET: Registered protocol family 2
[ 0.745100] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.745640] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.746371] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[ 0.747348] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.747359] TCP reno registered
[ 0.755200] NET: Registered protocol family 1
[ 0.774957] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[ 0.774957] Initializing RT-Tester: OK
[ 0.774957] audit: initializing netlink socket (enabled)
[ 0.774957] type=2000 audit(1213222638.751:1): initialized
[ 0.784957] highmem bounce pool size: 64 pages
[ 0.784957] Total HugeTLB memory allocated, 0
[ 0.834458] fuse init (API version 7.9)
[ 0.834653] msgmni has been set to 1764 for ipc namespace c0498e80
[ 0.834653] SELinux: Registering netfilter hooks
[ 0.834653] io scheduler noop registered
[ 0.834669] io scheduler cfq registered (default)
[ 0.834865] pci 0000:01:00.0: Boot video device
[ 0.844458] vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 1536k, total 16384k
[ 0.844458] vesafb: mode is 1024x768x8, linelength=1024, pages=18
[ 0.844458] vesafb: protected mode interface info at c000:ad0c
[ 0.844458] vesafb: pmi: set display start = c00cad94, set palette = c00cae50
[ 0.844458] vesafb: scrolling: redraw
[ 0.844458] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 0.861454] Console: switching to colour frame buffer device 128x48
[ 0.874456] fb0: VESA VGA frame buffer device
[ 0.874456] power_supply ADP1: uevent
[ 0.874456] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 0.874456] power_supply ADP1: Static prop TYPE=Mains
[ 0.874456] power_supply ADP1: 1 dynamic props
[ 0.874456] power_supply ADP1: prop ONLINE=1
[ 0.874456] power_supply ADP1: power_supply_changed
[ 0.874456] ACPI: AC Adapter [ADP1] (on-line)
[ 0.874456] power_supply ADP1: power_supply_changed_work
[ 0.874456] power_supply ADP1: power_supply_update_gen_leds 1
[ 0.874456] power_supply ADP1: uevent
[ 0.874456] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 0.874456] power_supply ADP1: Static prop TYPE=Mains
[ 0.874456] power_supply ADP1: 1 dynamic props
[ 0.874456] power_supply ADP1: prop ONLINE=1
[ 0.884436] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.904437] hpet_resources: 0xfed00000 is busy
[ 0.914437] loop: module loaded
[ 0.914437] Linux video capture interface: v2.00
[ 0.926107] input: Macintosh mouse button emulation as /class/input/input0
[ 0.926107] Driver 'sd' needs updating - please use bus_type methods
[ 0.937583] Driver 'sr' needs updating - please use bus_type methods
[ 0.942313] ata_piix 0000:00:1f.1: version 2.12
[ 0.947320] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.952555] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 0.963684] scsi0 : ata_piix
[ 0.970313] scsi1 : ata_piix
[ 0.970313] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
[ 0.975519] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
[ 1.158436] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66
[ 1.198356] ata1.00: configured for UDMA/66
[ 1.369182] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5
[ 1.369182] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.369182] Uniform CD-ROM driver Revision: 3.20
[ 1.401747] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.401747] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.406936] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.412133] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 1.568074] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.578046] scsi2 : ata_piix
[ 1.588587] scsi3 : ata_piix
[ 1.590062] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
[ 1.598048] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
[ 1.780048] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
[ 1.785157] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.857761] ata3.01: configured for UDMA/100
[ 2.036917] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
[ 2.036917] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 2.051848] sd 2:0:1:0: [sda] Write Protect is off
[ 2.057498] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.063191] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.069119] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 2.078946] sd 2:0:1:0: [sda] Write Protect is off
[ 2.080888] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.090883] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.097022] sda: sda1 sda2 < sda5 >
[ 2.109569] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.115797] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 2.126804] usbcore: registered new interface driver usblcd
[ 2.133368] usbcore: registered new interface driver usbled
[ 2.133368] PNP: No PS/2 controller found. Probing ports directly.
[ 2.148353] i8042.c: No controller found.
[ 2.169851] mice: PS/2 mouse device common for all mice
[ 2.169851] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 2.186072] EDAC MC: Ver: 2.1.0 Jun 5 2008
[ 2.200286] cpuidle: using governor ladder
[ 2.200286] cpuidle: using governor menu
[ 2.212846] usbcore: registered new interface driver hiddev
[ 2.223629] usbcore: registered new interface driver usbhid
[ 2.223629] usbhid: v2.6:USB HID core driver
[ 2.235931] Advanced Linux Sound Architecture Driver Version 1.0.16.
[ 2.235931] ALSA device list:
[ 2.245928] No soundcards found.
[ 2.258385] oprofile: using NMI interrupt.
[ 2.258385] IPVS: Registered protocols (TCP, AH, ESP)
[ 2.275478] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 2.279244] IPVS: ipvs loaded.
[ 2.285572] Initializing XFRM netlink socket
[ 2.293192] NET: Registered protocol family 17
[ 2.299154] NET: Registered protocol family 15
[ 2.304964] Using IPI No-Shortcut mode
[ 2.326793] kjournald starting. Commit interval 5 seconds
[ 2.316800] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.316800] VFS: Mounted root (ext3 filesystem) readonly.
[ 2.316800] Freeing unused kernel memory: 328k freed
[ 3.185790] SELinux: 8192 avtab hash slots, 205740 rules.
[ 3.471154] SELinux: 8192 avtab hash slots, 205740 rules.
[ 3.831003] SELinux: 7 users, 7 roles, 3017 types, 90 bools
[ 3.836760] SELinux: 72 classes, 205740 rules
[ 3.854861] SELinux: Completing initialization.
[ 3.861002] SELinux: Setting up existing superblocks.
[ 3.884233] SELinux: initialized (dev sda1, type ext3), uses xattr
[ 3.894234] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 3.894234] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 4.021550] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
[ 4.027188] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 4.032805] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
[ 4.038328] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.043891] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 4.053886] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 4.061002] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 4.066770] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 4.072401] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 4.078095] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 4.083676] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 4.089197] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 4.135880] SELinux: policy loaded with handle_unknown=deny
[ 4.143602] type=1403 audit(1213222641.930:2): policy loaded auid=4294967295 ses=4294967295
[ 5.246953] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.266953] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 10.726228] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 11.044001] power_supply ADP1: uevent
[ 11.055995] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 11.062117] power_supply ADP1: Static prop TYPE=Mains
[ 11.070834] power_supply ADP1: 1 dynamic props
[ 11.076578] power_supply ADP1: prop ONLINE=1
[ 13.398174] input: Power Button (FF) as /class/input/input1
[ 13.469303] ACPI: Power Button (FF) [PWRF]
[ 13.477909] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309)
[ 13.485448] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
[ 13.495875] Monitor-Mwait will be used to enter C-1 state
[ 13.501789] Monitor-Mwait will be used to enter C-2 state
[ 13.507598] Monitor-Mwait will be used to enter C-3 state
[ 13.515268] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 13.520587] ACPI: ACPI0007:00 is registered as cooling_device0
[ 13.526296] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 13.532370] input: Lid Switch as /class/input/input2
[ 13.538327] ACPI: Lid Switch [LID0]
[ 13.544961] input: Power Button (CM) as /class/input/input3
[ 13.555267] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
[ 13.562560] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
[ 13.575267] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 13.581362] ACPI: ACPI0007:01 is registered as cooling_device1
[ 13.581379] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 13.624814] ACPI: Power Button (CM) [PWRB]
[ 13.635267] input: Sleep Button (CM) as /class/input/input4
[ 13.688515] ACPI: Sleep Button (CM) [SLPB]
[ 13.748608] input: Video Bus as /class/input/input5
[ 13.802226] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.964490] USB Universal Host Controller Interface driver v3.0
[ 13.967601] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 13.977351] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 13.983689] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 13.986340] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 13.996149] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 14.002593] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 14.005747] usb usb1: configuration #1 chosen from 1 choice
[ 14.015573] hub 1-0:1.0: USB hub found
[ 14.021589] hub 1-0:1.0: 2 ports detected
[ 14.094943] Marking TSC unstable due to: TSC halts in idle.
[ 14.137077] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 14.143174] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 14.149164] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.159155] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 14.161469] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 14.171754] usb usb2: configuration #1 chosen from 1 choice
[ 14.178020] hub 2-0:1.0: USB hub found
[ 14.180544] hub 2-0:1.0: 2 ports detected
[ 14.307200] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 14.311677] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 14.315210] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.325049] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 14.328092] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 14.338363] usb usb3: configuration #1 chosen from 1 choice
[ 14.344930] hub 3-0:1.0: USB hub found
[ 14.347859] hub 3-0:1.0: 2 ports detected
[ 14.426955] ath_hal: module license 'Proprietary' taints kernel.
[ 14.437452] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
[ 14.464036] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 14.473307] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 14.485101] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 14.494998] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 14.498837] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 14.509114] usb usb4: configuration #1 chosen from 1 choice
[ 14.515874] hub 4-0:1.0: USB hub found
[ 14.519724] hub 4-0:1.0: 2 ports detected
[ 14.529750] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 14.689101] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 14.694087] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 14.704418] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 14.714410] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 14.728248] ehci_hcd 0000:00:1d.7: debug port 1
[ 14.738264] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 14.745030] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400
[ 14.771905] usb 1-2: unable to read config index 0 descriptor/start: -71
[ 14.778793] usb 1-2: chopping to 0 config(s)
[ 14.778844] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 14.788473] usb usb5: configuration #1 chosen from 1 choice
[ 14.795357] hub 5-0:1.0: USB hub found
[ 14.799513] hub 5-0:1.0: 8 ports detected
[ 14.816382] usb 1-2: string descriptor 0 read error: -71
[ 14.833306] usb 1-2: string descriptor 0 read error: -71
[ 14.833306] usb 1-2: no configuration chosen from 0 choices
[ 14.875803] wlan: svn r3692
[ 14.926321] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 14.930119] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 14.945766] ath_pci: svn r3692
[ 15.023327] hda_codec: STAC922x, Apple subsys_id=106b1e00
[ 15.101832] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 15.158037] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 15.196805] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 15.200410] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 15.336804] MadWifi: ath_attach: HAL managed transmit power control (TPC) disabled.
[ 15.344004] MadWifi: ath_attach: Interference mitigation is supported. Currently disabled.
[ 15.355610] MadWifi: ath_attach: Switching rfkill capability off.
[ 15.496471] ath_rate_sample: 1.2 (svn r3692)
[ 15.780721] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 15.787523] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 15.797463] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 15.802703] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 15.812704] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 15.820288] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 15.827717] wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0)
[ 15.832388] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 15.842390] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 15.849696] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 15.853930] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 15.863931] wifi0: Use hw queue 4 for XR traffic
[ 15.870929] wifi0: Use hw queue 7 for UAPSD traffic
[ 15.877706] wifi0: Use hw queue 8 for CAB traffic
[ 15.884366] wifi0: Use hw queue 9 for beacons
[ 16.029414] usb 5-4: new high speed USB device using ehci_hcd and address 3
[ 16.129566] ath_pci: wifi0: Atheros 5418: mem=0x50100000, irq=17
[ 16.182120] usb 5-4: configuration #1 chosen from 1 choice
[ 16.504490] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe2ad87e]
[ 16.739204] usb 1-2: USB disconnect, address 2
[ 17.025349] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 17.175932] Clocksource tsc unstable (delta = -144725830 ns)
[ 17.236242] usb 1-2: configuration #1 chosen from 1 choice
[ 17.248620] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6
[ 17.292813] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 17.310346] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7
[ 17.330269] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 17.639285] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 17.835576] usb 3-2: configuration #1 chosen from 1 choice
[ 17.859062] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
[ 18.150145] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 18.354409] usb 4-1: configuration #1 chosen from 1 choice
[ 18.386840] input: HID 05ac:1000 as /class/input/input8
[ 18.413314] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 18.442752] input: HID 05ac:1000 as /class/input/input9
[ 18.462962] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 18.478073] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 18.488689] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 18.493065] input: Built-in iSight as /class/input/input10
[ 18.581268] usbcore: registered new interface driver uvcvideo
[ 18.581268] USB Video Class driver (SVN r212)
[ 18.601277] appletouch: Geyser mode initialized.
[ 18.601277] input: appletouch as /class/input/input11
[ 18.734313] usbcore: registered new interface driver appletouch
[ 19.484692] usb 5-4: USB disconnect, address 3
[ 19.550350] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 19.766717] applesmc: Apple MacBook Pro detected:
[ 19.773268] applesmc: - Model with accelerometer
[ 19.790175] applesmc: - Model with light sensors and backlight
[ 19.790181] applesmc: - Model with 12 temperature sensors
[ 19.806753] applesmc: device has already been initialized (0xe0, 0x00).
[ 19.814072] applesmc: device successfully initialized.
[ 19.821625] applesmc: 2 fans found.
[ 19.835999] input: applesmc as /class/input/input12
[ 19.904679] Registered led device: smc::kbd_backlight
[ 19.905568] applesmc: driver successfully loaded.
[ 19.968852] Linux agpgart interface v0.103
[ 20.049253] Symbol init_mm is marked as UNUSED, however this module is using it.
[ 20.054176] This symbol will go away in the future.
[ 20.064762] Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
[ 20.131753] [fglrx] Maximum main memory to use for locked dma buffers: 913 MBytes.
[ 20.139819] [fglrx] ASYNCIO init succeed!
[ 20.147521] [fglrx] PAT is enabled successfully!
[ 20.158437] [fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0
[ 20.565271] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.702430] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 20.774021] arp_tables: (C) 2002 David S. Miller
[ 20.872065] ieee80211_crypt: registered algorithm 'NULL'
[ 20.893257] ieee80211_crypt: registered algorithm 'TKIP'
[ 21.019075] usbcore: registered new interface driver isight_firmware
[ 21.080819] ipmi message handler version 39.2
[ 21.105318] IPMI Watchdog: driver initialized
[ 21.365194] Adding 2988048k swap on /dev/disk/by-uuid/c58cdc7c-b94b-4116-9cca-bf154269e4d8. Priority:-1 extents:1 across:2988048k
[ 21.559651] usb 5-4: new high speed USB device using ehci_hcd and address 6
[ 21.569384] EXT3 FS on sda1, internal journal
[ 21.755206] usb 5-4: configuration #1 chosen from 1 choice
[ 21.755206] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 21.756186] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 21.773143] input: Built-in iSight as /class/input/input13
[ 26.284932] appletouch: incomplete data package (first byte: 2, length: 4).
[ 28.579747] input: Pommed beeper device as /class/input/input14
[ 28.887272] Bluetooth: Core ver 2.11
[ 28.906979] NET: Registered protocol family 31
[ 28.906979] Bluetooth: HCI device and connection manager initialized
[ 28.906979] Bluetooth: HCI socket layer initialized
[ 28.978585] Bluetooth: L2CAP ver 2.9
[ 28.978585] Bluetooth: L2CAP socket layer initialized
[ 29.054198] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 29.090302] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[ 29.145123] Bluetooth: RFCOMM socket layer initialized
[ 29.145123] Bluetooth: RFCOMM TTY layer initialized
[ 29.145123] Bluetooth: RFCOMM ver 1.8
[ 29.433426] usb 4-1: USB disconnect, address 2
[ 29.800888] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 30.025351] usb 4-1: configuration #1 chosen from 1 choice
[ 30.207665] Bluetooth: HCI USB driver ver 2.9
[ 30.220350] usbcore: registered new interface driver hci_usb
[ 32.623897] CPA self-test:
[ 32.623955] 4k 0 large 224 gb 0 x 224[c0000000-f7c00000] miss 0
[ 32.653843] 4k 194560 large 34 gb 0 x 194594[c0000000-f7fff000] miss 0
[ 32.673792] 4k 194560 large 34 gb 0 x 194594[c0000000-f7fff000] miss 0
[ 32.673800] ok.
[ 36.839696] input: Apple Computer, Inc. Mighty Mouse as /class/input/input15
[ 43.802050] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 47.017219] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 47.017219] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[ 47.017219] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 47.370551] [fglrx] interrupt source 20008000 successfully enabled
[ 47.370551] [fglrx] enable ID = 0x00000008
[ 47.370551] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 47.370551] [fglrx] interrupt source 10000000 successfully enabled
[ 47.370551] [fglrx] enable ID = 0x00000009
[ 47.370551] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 254.300757] type=1400 audit(1213222882.793:3): avc: denied { write } for pid=3430 comm="gmplayer" name=".dvdcss" dev=sda1 ino=3214304 scontext=a-12:user_r:user_mplayer_t tcontext=a-12:object_r:sysadm_home_t tclass=dir
[ 254.300825] type=1300 audit(1213222882.793:3): arch=40000003 syscall=39 success=no exit=-13 a0=8ba5518 a1=1ed a2=8ba5518 a3=31 items=0 ppid=3310 pid=3430 auid=4294967295 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=pts2 ses=4294967295 comm="gmplayer" exe="/usr/bin/mplayer" subj=a-12:user_r:user_mplayer_t key=(null)
[ 296.491411] PM: Syncing filesystems ... done.
[ 297.491850] Freezing user space processes ... (elapsed 0.08 seconds) done.
[ 297.581852] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 297.581990] Suspending console(s)
[ 297.667701] sd 2:0:1:0: [sda] Synchronizing SCSI cache
[ 297.667951] sd 2:0:1:0: [sda] Stopping disk
[ 297.790039] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 297.807006] [fglrx] firegl_gps_setpowerdown .
[ 297.837711] ACPI: PCI interrupt for device 0000:01:00.0 disabled
[ 297.845605] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 297.885630] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 297.885630] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 297.915156] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 297.915204] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 297.915251] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 297.915299] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 297.925279] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 298.117353] ACPI: Preparing to enter system sleep state S3
[ 298.217470] Disabling non-boot CPUs ...
[ 298.217494] CPU0 attaching NULL sched-domain.
[ 298.217499] CPU1 attaching NULL sched-domain.
[ 298.337259] CPU 1 is now offline
[ 298.337263] SMP alternatives: switching to UP code
[ 298.358532] CPU0 attaching NULL sched-domain.
[ 298.359194] CPU1 is down
[ 298.359299] Extended CMOS year: 2000
[ 298.359299] Intel machine check architecture supported.
[ 298.359305] Intel machine check reporting enabled on CPU#0.
[ 298.359367] Back to C!
[ 298.359657] Extended CMOS year: 2000
[ 298.359753] Enabling non-boot CPUs ...
[ 298.359970] CPU0 attaching NULL sched-domain.
[ 298.360205] SMP alternatives: switching to SMP code
[ 298.371154] Booting processor 1/1 ip 6000
[ 298.377561] Initializing CPU#1
[ 298.517321] Calibrating delay using timer specific routine.. 4322.56 BogoMIPS (lpj=21612806)
[ 298.517321] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 298.517321] CPU: L2 cache: 4096K
[ 298.517321] CPU: Physical Processor ID: 0
[ 298.517321] CPU: Processor Core ID: 1
[ 298.517321] Intel machine check architecture supported.
[ 298.517321] Intel machine check reporting enabled on CPU#1.
[ 298.527991] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 298.528034] CPU0 attaching sched-domain:
[ 298.528037] domain 0: span 0-1
[ 298.528038] groups: 0 1
[ 298.528044] CPU1 attaching sched-domain:
[ 298.528046] domain 0: span 0-1
[ 298.528047] groups: 1 0
[ 298.517321] Switched to high resolution mode on CPU 1
[ 298.517321] CPU1 is up
[ 299.312134] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b)
[ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0)
[ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001)
[ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030)
[ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 3030)
[ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100)
[ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040)
[ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007)
[ 299.336850] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 299.336850] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 299.336850] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b)
[ 299.336850] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000)
[ 299.336850] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002)
[ 299.348774] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
[ 299.348802] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004)
[ 299.349371] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40)
[ 299.349382] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 299.349415] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 299.349426] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 299.529333] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051)
[ 299.529343] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020)
[ 299.529352] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 2020)
[ 299.529366] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040)
[ 299.529377] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
[ 299.529437] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 299.529446] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 299.529481] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
[ 299.529489] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010)
[ 299.529498] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0)
[ 299.529512] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040)
[ 299.529523] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007)
[ 299.529581] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 299.529590] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 299.529624] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801)
[ 299.529633] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10)
[ 299.529642] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 1010)
[ 299.529656] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040)
[ 299.529667] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007)
[ 299.529724] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 299.529733] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 299.529745] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 299.529756] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 299.529822] usb usb1: root hub lost power or was reset
[ 299.529861] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 299.529872] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 299.529936] usb usb2: root hub lost power or was reset
[ 299.529959] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 299.529970] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 299.530034] usb usb3: root hub lost power or was reset
[ 299.530068] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 299.530079] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 299.530142] usb usb4: root hub lost power or was reset
[ 299.548488] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 299.548499] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 299.548586] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1)
[ 299.548595] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00)
[ 299.548604] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 228000f0)
[ 299.548622] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007)
[ 299.548652] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 299.548725] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b)
[ 299.548758] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005)
[ 299.548775] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 299.548784] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 299.568429] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b)
[ 299.568464] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)
[ 299.568490] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 299.568500] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 299.575510] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 299.575523] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 299.587145] [fglrx] firegl_gps_setpowerup .
[ 299.587145] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b)
[ 299.587145] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000)
[ 299.587145] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001)
[ 299.587145] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004)
[ 299.587145] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40)
[ 299.587145] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 100007)
[ 299.599903] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a)
[ 299.603144] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004)
[ 299.603154] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40)
[ 299.603167] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007)
[ 299.603214] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 299.603225] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 299.623913] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000)
[ 299.623923] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000)
[ 299.623933] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810)
[ 299.628015] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016)
[ 299.685224] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 299.685224] sd 2:0:1:0: [sda] Starting disk
[ 299.741785] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 299.741790] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out
[ 299.781582] ata1.00: configured for UDMA/66
[ 300.312741] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
[ 300.312747] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out
[ 300.429686] ata3.01: configured for UDMA/100
[ 300.447147] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 300.447205] sd 2:0:1:0: [sda] Write Protect is off
[ 300.447209] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 300.447309] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 301.296852] usb 1-2: reset full speed USB device using uhci_hcd and address 3
[ 301.468155] appletouch: Geyser mode initialized.
[ 301.604608] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 301.763808] applesmc: device has already been initialized (0xe0, 0x00).
[ 301.963812] usb 4-1: reset full speed USB device using uhci_hcd and address 3
[ 302.033553] Restarting tasks ... <6>usb 4-1: USB disconnect, address 3
[ 302.050504] done.
[ 302.188878] appletouch: incomplete data package (first byte: 2, length: 4).
[ 303.076201] usb 4-1: new full speed USB device using uhci_hcd and address 4
[ 303.283452] usb 4-1: configuration #1 chosen from 1 choice
[ 303.306080] input: HID 05ac:1000 as /class/input/input16
[ 303.351821] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 303.373599] input: HID 05ac:1000 as /class/input/input17
[ 303.377051] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 322.118951] end_request: I/O error, dev sr0, sector 319600
[ 322.118951] Buffer I/O error on device sr0, logical block 39950
[ 322.118951] Buffer I/O error on device sr0, logical block 39951
[ 322.118951] Buffer I/O error on device sr0, logical block 39952
[ 322.118951] Buffer I/O error on device sr0, logical block 39953
[ 322.118951] Buffer I/O error on device sr0, logical block 39954
[ 322.118951] Buffer I/O error on device sr0, logical block 39955
[ 322.118951] Buffer I/O error on device sr0, logical block 39956
[ 322.118951] Buffer I/O error on device sr0, logical block 39957
[ 322.118951] Buffer I/O error on device sr0, logical block 39958
[ 322.118951] Buffer I/O error on device sr0, logical block 39959
[ 327.366743] __ratelimit: 11029 messages suppressed
[ 327.366743] Buffer I/O error on device sr0, logical block 45485
[ 332.434583] __ratelimit: 9711 messages suppressed
[ 332.434595] Buffer I/O error on device sr0, logical block 50341
[ 337.414055] __ratelimit: 9307 messages suppressed
[ 337.414055] Buffer I/O error on device sr0, logical block 54995
[ 342.503516] __ratelimit: 9711 messages suppressed
[ 342.503528] Buffer I/O error on device sr0, logical block 59851
[ 350.185066] __ratelimit: 8903 messages suppressed
[ 350.185066] type=1400 audit(1213222983.723:4): avc: denied { write } for pid=3430 comm="gmplayer" name=".dvdcss" dev=sda1 ino=3214304 scontext=a-12:user_r:user_mplayer_t tcontext=a-12:object_r:sysadm_home_t tclass=dir
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-06-11 22:27 ` Justin Mattock
@ 2008-06-12 1:18 ` Tejun Heo
2008-06-12 2:10 ` Justin Mattock
0 siblings, 1 reply; 18+ messages in thread
From: Tejun Heo @ 2008-06-12 1:18 UTC (permalink / raw)
To: Justin Mattock; +Cc: Andrew Morton, linux-kernel, linux-ide
Justin Mattock wrote:
> O.K. attached is dmesg of playing a dvd, then suspending and wakingup,
> as well as starting after the buffer error.(audit messages)
> This is interesting, even pausing the dvd before suspending, causes
> the same error.
> I sent a post to mplayer-users to see if there is a way to have
> mplayer pause and wait for the disk drive to align, but am still
> waiting
> for a response.
Can you please do the followings?
1. dd if=/dev/sr0 of=/dev/null bs=1M
2. suspend / resume
3. see whether dd fails and post the resulting dmesg.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-06-12 1:18 ` Tejun Heo
@ 2008-06-12 2:10 ` Justin Mattock
2008-06-12 2:13 ` Justin Mattock
0 siblings, 1 reply; 18+ messages in thread
From: Justin Mattock @ 2008-06-12 2:10 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
On Thu, Jun 12, 2008 at 1:18 AM, Tejun Heo <htejun@gmail.com> wrote:
> Justin Mattock wrote:
>> O.K. attached is dmesg of playing a dvd, then suspending and wakingup,
>> as well as starting after the buffer error.(audit messages)
>> This is interesting, even pausing the dvd before suspending, causes
>> the same error.
>> I sent a post to mplayer-users to see if there is a way to have
>> mplayer pause and wait for the disk drive to align, but am still
>> waiting
>> for a response.
>
> Can you please do the followings?
>
> 1. dd if=/dev/sr0 of=/dev/null bs=1M
> 2. suspend / resume
> 3. see whether dd fails and post the resulting dmesg.
>
> Thanks.
>
> --
> tejun
>
Hello; I did what you had suggested(twice below is the first,same
results with second)
upon wakeup dd just quits giving me this:
dd: reading `/dev/sr0': Input/output error
3+1 records in
3+1 records out
3276800 bytes (3.3 MB) copied, 21.834 seconds, 150 kB/s
And under dmesg:
[ 329.596421] end_request: I/O error, dev sr0, sector 6400
[ 329.596437] Buffer I/O error on device sr0, logical block 800
[ 329.596903] Buffer I/O error on device sr0, logical block 833
[ 329.596912] Buffer I/O error on device sr0, logical block 834
[ 329.596919] Buffer I/O error on device sr0, logical block 835
[ 329.596926] Buffer I/O error on device sr0, logical block 836
[ 329.596934] Buffer I/O error on device sr0, logical block 837
[ 329.596941] Buffer I/O error on device sr0, logical block 838
[ 329.596949] Buffer I/O error on device sr0, logical block 839
[ 329.596956] Buffer I/O error on device sr0, logical block 840
[ 329.596963] Buffer I/O error on device sr0, logical block 841
regards;
--
Justin P. Mattock
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-06-12 2:10 ` Justin Mattock
@ 2008-06-12 2:13 ` Justin Mattock
2008-06-12 4:15 ` Tejun Heo
0 siblings, 1 reply; 18+ messages in thread
From: Justin Mattock @ 2008-06-12 2:13 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
[-- Attachment #1: Type: text/plain, Size: 1906 bytes --]
On Thu, Jun 12, 2008 at 2:10 AM, Justin Mattock <justinmattock@gmail.com> wrote:
> On Thu, Jun 12, 2008 at 1:18 AM, Tejun Heo <htejun@gmail.com> wrote:
>> Justin Mattock wrote:
>>> O.K. attached is dmesg of playing a dvd, then suspending and wakingup,
>>> as well as starting after the buffer error.(audit messages)
>>> This is interesting, even pausing the dvd before suspending, causes
>>> the same error.
>>> I sent a post to mplayer-users to see if there is a way to have
>>> mplayer pause and wait for the disk drive to align, but am still
>>> waiting
>>> for a response.
>>
>> Can you please do the followings?
>>
>> 1. dd if=/dev/sr0 of=/dev/null bs=1M
>> 2. suspend / resume
>> 3. see whether dd fails and post the resulting dmesg.
>>
>> Thanks.
>>
>> --
>> tejun
>>
>
> Hello; I did what you had suggested(twice below is the first,same
> results with second)
> upon wakeup dd just quits giving me this:
>
> dd: reading `/dev/sr0': Input/output error
> 3+1 records in
> 3+1 records out
> 3276800 bytes (3.3 MB) copied, 21.834 seconds, 150 kB/s
>
> And under dmesg:
> [ 329.596421] end_request: I/O error, dev sr0, sector 6400
> [ 329.596437] Buffer I/O error on device sr0, logical block 800
> [ 329.596903] Buffer I/O error on device sr0, logical block 833
> [ 329.596912] Buffer I/O error on device sr0, logical block 834
> [ 329.596919] Buffer I/O error on device sr0, logical block 835
> [ 329.596926] Buffer I/O error on device sr0, logical block 836
> [ 329.596934] Buffer I/O error on device sr0, logical block 837
> [ 329.596941] Buffer I/O error on device sr0, logical block 838
> [ 329.596949] Buffer I/O error on device sr0, logical block 839
> [ 329.596956] Buffer I/O error on device sr0, logical block 840
> [ 329.596963] Buffer I/O error on device sr0, logical block 841
>
> regards;
>
>
> --
> Justin P. Mattock
>
Heres dmesg:
(forgot to attach)
--
Justin P. Mattock
[-- Attachment #2: dmesg3 --]
[-- Type: application/octet-stream, Size: 66930 bytes --]
[ 0.000000] Linux version 2.6.26-rc5-00016-g91cc75d (root@unix) (gcc version 4.2.3 (Debian 4.2.3-3)) #10 SMP Wed Jun 11 17:47:09 UTC 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable)
[ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] 112MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 258282) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 258282
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 258282
[ 0.000000] On node 0 totalpages: 258282
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 226 pages used for memmap
[ 0.000000] HighMem zone: 28680 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
[ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
[ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309)
[ 0.000000] ACPI: FACS 3FEC0000, 0040
[ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
[ 0.000000] ACPI: DMI detected: Apple
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 46760 bytes of per cpu data
[ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256264
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash vga=773 selinux=1 audit=1 enforcing=1 debug acpi_osi=Linux pnpacpi=off pci=routeirq usbcore.autosuspend=1 nmi_watchdog=0
[ 0.000000] audit: enabled (after initialization)
[ 0.000000] ACPI: Added _OSI(Linux)
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Detected 2161.333 MHz processor.
[ 0.010000] Console: colour dummy device 80x25
[ 0.010000] console [tty0] enabled
[ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.010000] Memory: 1018712k/1033128k available (2556k kernel code, 13800k reserved, 1279k data, 328k init, 115624k highmem)
[ 0.010000] virtual kernel memory layout:
[ 0.010000] fixmap : 0xfff7e000 - 0xfffff000 ( 516 kB)
[ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.010000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.010000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.010000] .init : 0xc04c5000 - 0xc0517000 ( 328 kB)
[ 0.010000] .data : 0xc037f06d - 0xc04bedac (1279 kB)
[ 0.010000] .text : 0xc0100000 - 0xc037f06d (2556 kB)
[ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.010000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.010000] hpet clockevent registered
[ 0.159749] Calibrating delay using timer specific routine.. 4326.69 BogoMIPS (lpj=21633450)
[ 0.159798] Security Framework initialized
[ 0.159804] SELinux: Initializing.
[ 0.159816] SELinux: Starting in enforcing mode
[ 0.159822] selinux_register_security: Registering secondary module capability
[ 0.159828] Capability LSM initialized as secondary
[ 0.159850] Mount-cache hash table entries: 512
[ 0.160000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.160000] CPU: L2 cache: 4096K
[ 0.160000] CPU: Physical Processor ID: 0
[ 0.160000] CPU: Processor Core ID: 0
[ 0.160000] Intel machine check architecture supported.
[ 0.160000] Intel machine check reporting enabled on CPU#0.
[ 0.160000] using mwait in idle threads.
[ 0.160000] Checking 'hlt' instruction... OK.
[ 0.200000] ACPI: Core revision 20080321
[ 0.210000] ENABLING IO-APIC IRQs
[ 0.210000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.309939] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 0.310000] Booting processor 1/1 ip 6000
[ 0.320000] Initializing CPU#1
[ 0.320000] Calibrating delay using timer specific routine.. 4322.51 BogoMIPS (lpj=21612588)
[ 0.320000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.320000] CPU: L2 cache: 4096K
[ 0.320000] CPU: Physical Processor ID: 0
[ 0.320000] CPU: Processor Core ID: 1
[ 0.320000] Intel machine check architecture supported.
[ 0.320000] Intel machine check reporting enabled on CPU#1.
[ 0.470000] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 0.470000] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.470030] Brought up 2 CPUs
[ 0.470035] Total of 2 processors activated (8649.20 BogoMIPS).
[ 0.470058] CPU0 attaching sched-domain:
[ 0.470063] domain 0: span 0-1
[ 0.470067] groups: 0 1
[ 0.470075] CPU1 attaching sched-domain:
[ 0.470079] domain 0: span 0-1
[ 0.470082] groups: 1 0
[ 0.480000] net_namespace: 516 bytes
[ 0.480000] Booting paravirtualized kernel on bare hardware
[ 0.480000] NET: Registered protocol family 16
[ 0.480000] No dock devices found.
[ 0.480000] EISA bus registered
[ 0.480000] ACPI: bus type pci registered
[ 0.480000] PCI: Using configuration type 1 for base access
[ 0.480000] Setting up standard PCI resources
[ 0.480000] ACPI: EC: EC description table is found, configuring boot EC
[ 0.480000] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.496852] ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.497697] ACPI: Interpreter enabled
[ 0.497702] ACPI: (supports S0 S3 S4 S5)
[ 0.497760] ACPI: Using IOAPIC for interrupt routing
[ 0.520000] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.520000] ACPI: EC: driver started in interrupt mode
[ 0.520000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.522885] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.522894] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.523883] PCI: Transparent bridge - 0000:00:1e.0
[ 0.523935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.525442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.525916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.526379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.526841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.527324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.551972] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.551972] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.551972] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.551972] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.551972] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.551972] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.551972] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.551972] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.551972] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.551972] pnp: PnP ACPI: disabled
[ 0.551973] SCSI subsystem initialized
[ 0.551973] libata version 3.00 loaded.
[ 0.551973] usbcore: registered new interface driver usbfs
[ 0.551973] usbcore: registered new interface driver hub
[ 0.551973] usbcore: registered new device driver usb
[ 0.551973] PCI: Using ACPI for IRQ routing
[ 0.551973] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
[ 0.551973] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.551973] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.551973] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 0.551973] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.551973] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.551973] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.551973] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 0.551973] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.551973] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.551973] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 0.551973] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 0.551973] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.551973] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.551973] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.551973] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.551973] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.551973] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.551973] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.581850] NetLabel: Initializing
[ 0.581854] NetLabel: domain hash size = 128
[ 0.581857] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.581925] NetLabel: unlabeled traffic allowed by default
[ 0.581936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.581943] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.590780] Switched to high resolution mode on CPU 0
[ 0.592677] Switched to high resolution mode on CPU 1
[ 0.625687] PCI: Bridge: 0000:00:01.0
[ 0.625692] IO window: 3000-3fff
[ 0.625698] MEM window: 0x50300000-0x503fffff
[ 0.625703] PREFETCH window: 0x0000000040000000-0x0000000047ffffff
[ 0.625711] PCI: Bridge: 0000:00:1c.0
[ 0.625716] IO window: 2000-2fff
[ 0.625724] MEM window: 0x50200000-0x502fffff
[ 0.625730] PREFETCH window: 0x0000000050500000-0x00000000505fffff
[ 0.625740] PCI: Bridge: 0000:00:1c.1
[ 0.625743] IO window: disabled.
[ 0.625751] MEM window: 0x50100000-0x501fffff
[ 0.625757] PREFETCH window: disabled.
[ 0.625766] PCI: Bridge: 0000:00:1c.2
[ 0.625770] IO window: 1000-1fff
[ 0.625778] MEM window: 0x4c100000-0x500fffff
[ 0.625784] PREFETCH window: 0x0000000048000000-0x000000004bffffff
[ 0.625794] PCI: Bridge: 0000:00:1e.0
[ 0.625797] IO window: disabled.
[ 0.625805] MEM window: 0x4c000000-0x4c0fffff
[ 0.625811] PREFETCH window: disabled.
[ 0.625830] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.625839] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.625866] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.625875] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.625902] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.625912] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.625939] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.625949] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.625965] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.625981] NET: Registered protocol family 2
[ 0.654495] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.654774] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.655198] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[ 0.655754] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.655759] TCP reno registered
[ 0.664557] NET: Registered protocol family 1
[ 0.674429] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[ 0.684426] Initializing RT-Tester: OK
[ 0.684426] audit: initializing netlink socket (enabled)
[ 0.684426] type=2000 audit(1213235725.660:1): initialized
[ 0.684426] highmem bounce pool size: 64 pages
[ 0.684426] Total HugeTLB memory allocated, 0
[ 0.695566] fuse init (API version 7.9)
[ 0.696092] msgmni has been set to 1764 for ipc namespace c0498e80
[ 0.696319] SELinux: Registering netfilter hooks
[ 0.696534] io scheduler noop registered
[ 0.696827] io scheduler cfq registered (default)
[ 0.696962] pci 0000:01:00.0: Boot video device
[ 0.697369] vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 1536k, total 16384k
[ 0.697377] vesafb: mode is 1024x768x8, linelength=1024, pages=18
[ 0.697381] vesafb: protected mode interface info at c000:ad0c
[ 0.697386] vesafb: pmi: set display start = c00cad94, set palette = c00cae50
[ 0.697391] vesafb: scrolling: redraw
[ 0.697394] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 0.710607] Console: switching to colour frame buffer device 128x48
[ 0.722599] fb0: VESA VGA frame buffer device
[ 0.722880] power_supply ADP1: uevent
[ 0.722975] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 0.723101] power_supply ADP1: Static prop TYPE=Mains
[ 0.723224] power_supply ADP1: 1 dynamic props
[ 0.723333] power_supply ADP1: prop ONLINE=1
[ 0.724426] power_supply ADP1: power_supply_changed
[ 0.724426] ACPI: AC Adapter [ADP1] (on-line)
[ 0.724426] power_supply ADP1: power_supply_changed_work
[ 0.724426] power_supply ADP1: power_supply_update_gen_leds 1
[ 0.724426] power_supply ADP1: uevent
[ 0.724426] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 0.724554] power_supply ADP1: Static prop TYPE=Mains
[ 0.724677] power_supply ADP1: 1 dynamic props
[ 0.724786] power_supply ADP1: prop ONLINE=1
[ 0.839590] power_supply BAT0: uevent
[ 0.839590] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 0.839590] power_supply BAT0: Static prop TYPE=Battery
[ 0.861681] power_supply BAT0: 12 dynamic props
[ 0.909040] power_supply BAT0: prop STATUS=Full
[ 0.912741] power_supply BAT0: prop PRESENT=1
[ 0.913702] power_supply BAT0: prop TECHNOLOGY=Unknown
[ 0.919516] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[ 0.923043] power_supply BAT0: prop VOLTAGE_NOW=12406000
[ 0.926535] power_supply BAT0: prop CURRENT_NOW=0
[ 0.929978] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[ 0.933406] power_supply BAT0: prop ENERGY_FULL=53050000
[ 0.936769] power_supply BAT0: prop ENERGY_NOW=50400000
[ 0.946162] power_supply BAT0: prop MODEL_NAME=ASMB012
[ 0.946162] power_supply BAT0: prop MANUFACTURER=SMPN012
[ 0.946166] power_supply BAT0: prop SERIAL_NUMBER=
[ 0.955987] power_supply BAT0: power_supply_changed
[ 0.955987] ACPI: Battery Slot [BAT0] (battery present)
[ 0.955987] power_supply BAT0: power_supply_changed_work
[ 0.963967] power_supply BAT0: power_supply_update_bat_leds 4
[ 0.967063] power_supply BAT0: uevent
[ 0.968646] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 0.968650] power_supply BAT0: Static prop TYPE=Battery
[ 0.977628] power_supply BAT0: 12 dynamic props
[ 0.977628] power_supply BAT0: prop STATUS=Full
[ 0.977632] power_supply BAT0: prop PRESENT=1
[ 0.986082] power_supply BAT0: prop TECHNOLOGY=Unknown
[ 0.986082] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[ 0.986082] power_supply BAT0: prop VOLTAGE_NOW=12406000
[ 0.986549] power_supply BAT0: prop CURRENT_NOW=0
[ 0.996545] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[ 0.996545] power_supply BAT0: prop ENERGY_FULL=53050000
[ 0.996545] power_supply BAT0: prop ENERGY_NOW=50400000
[ 0.996636] power_supply BAT0: prop MODEL_NAME=ASMB012
[ 1.006632] power_supply BAT0: prop MANUFACTURER=SMPN012
[ 1.006632] power_supply BAT0: prop SERIAL_NUMBER=
[ 1.015927] hpet_resources: 0xfed00000 is busy
[ 1.025956] loop: module loaded
[ 1.028373] Linux video capture interface: v2.00
[ 1.028373] input: Macintosh mouse button emulation as /class/input/input0
[ 1.028374] Driver 'sd' needs updating - please use bus_type methods
[ 1.038781] Driver 'sr' needs updating - please use bus_type methods
[ 1.042375] ata_piix 0000:00:1f.1: version 2.12
[ 1.045046] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 1.046017] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 1.054496] scsi0 : ata_piix
[ 1.054496] scsi1 : ata_piix
[ 1.063656] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
[ 1.063656] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
[ 1.241742] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66
[ 1.281694] ata1.00: configured for UDMA/66
[ 1.452259] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5
[ 1.452259] sr0: scsi3-mmc drive: 47x/47x writer cd/rw xa/form2 cdda tray
[ 1.462278] Uniform CD-ROM driver Revision: 3.20
[ 1.472274] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.472274] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.475601] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.479049] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 1.631738] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.641724] scsi2 : ata_piix
[ 1.641724] scsi3 : ata_piix
[ 1.652562] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
[ 1.652562] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
[ 1.832912] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
[ 1.832912] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.872235] ata3.01: configured for UDMA/100
[ 2.043294] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
[ 2.043294] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 2.043294] sd 2:0:1:0: [sda] Write Protect is off
[ 2.060489] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.064467] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.068663] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 2.078587] sd 2:0:1:0: [sda] Write Protect is off
[ 2.078587] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.082785] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.087196] sda: sda1 sda2 < sda5 >
[ 2.099833] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.100501] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 2.106522] usbcore: registered new interface driver usblcd
[ 2.110117] usbcore: registered new interface driver usbled
[ 2.119274] PNP: No PS/2 controller found. Probing ports directly.
[ 2.119274] i8042.c: No controller found.
[ 2.137272] mice: PS/2 mouse device common for all mice
[ 2.137272] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 2.137272] EDAC MC: Ver: 2.1.0 Jun 5 2008
[ 2.166454] cpuidle: using governor ladder
[ 2.166454] cpuidle: using governor menu
[ 2.173243] usbcore: registered new interface driver hiddev
[ 2.175694] usbcore: registered new interface driver usbhid
[ 2.180084] usbhid: v2.6:USB HID core driver
[ 2.184658] Advanced Linux Sound Architecture Driver Version 1.0.16.
[ 2.184660] ALSA device list:
[ 2.193602] No soundcards found.
[ 2.202344] oprofile: using NMI interrupt.
[ 2.202344] IPVS: Registered protocols (TCP, AH, ESP)
[ 2.202344] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 2.215101] IPVS: ipvs loaded.
[ 2.219380] Initializing XFRM netlink socket
[ 2.225071] NET: Registered protocol family 17
[ 2.229371] NET: Registered protocol family 15
[ 2.233545] Using IPI No-Shortcut mode
[ 2.242208] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 2.242958] EXT3-fs: write access will be enabled during recovery.
[ 2.687288] kjournald starting. Commit interval 5 seconds
[ 2.622039] EXT3-fs: recovery complete.
[ 2.622039] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.622039] VFS: Mounted root (ext3 filesystem) readonly.
[ 2.622039] Freeing unused kernel memory: 328k freed
[ 3.494355] SELinux: 8192 avtab hash slots, 205740 rules.
[ 3.632386] SELinux: 8192 avtab hash slots, 205740 rules.
[ 3.812314] SELinux: 7 users, 7 roles, 3017 types, 90 bools
[ 3.820109] SELinux: 72 classes, 205740 rules
[ 3.830111] SELinux: Completing initialization.
[ 3.830131] SELinux: Setting up existing superblocks.
[ 3.850146] SELinux: initialized (dev sda1, type ext3), uses xattr
[ 3.870126] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 4.004354] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 4.008837] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
[ 4.014323] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 4.020758] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
[ 4.022380] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.026517] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 4.030677] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 4.034814] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 4.040813] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 4.042947] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 4.046961] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 4.050922] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 4.055239] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 4.103902] SELinux: policy loaded with handle_unknown=deny
[ 4.105025] type=1403 audit(1213235728.930:2): policy loaded auid=4294967295 ses=4294967295
[ 5.190574] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.200327] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 10.440288] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 10.681632] power_supply ADP1: uevent
[ 10.690399] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 10.694793] power_supply ADP1: Static prop TYPE=Mains
[ 10.700396] power_supply ADP1: 1 dynamic props
[ 10.703674] power_supply ADP1: prop ONLINE=1
[ 10.713666] power_supply BAT0: uevent
[ 10.713669] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 10.723242] power_supply BAT0: Static prop TYPE=Battery
[ 10.723245] power_supply BAT0: 12 dynamic props
[ 11.217369] power_supply BAT0: prop STATUS=Full
[ 11.217369] power_supply BAT0: prop PRESENT=1
[ 11.221418] power_supply BAT0: prop TECHNOLOGY=Unknown
[ 11.225455] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[ 11.229369] power_supply BAT0: prop VOLTAGE_NOW=12406000
[ 11.229374] power_supply BAT0: prop CURRENT_NOW=0
[ 11.239362] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[ 11.243252] power_supply BAT0: prop ENERGY_FULL=53050000
[ 11.243257] power_supply BAT0: prop ENERGY_NOW=50400000
[ 11.247021] power_supply BAT0: prop MODEL_NAME=ASMB012
[ 11.250960] power_supply BAT0: prop MANUFACTURER=SMPN012
[ 11.254736] power_supply BAT0: prop SERIAL_NUMBER=
[ 12.007349] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309)
[ 12.009568] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
[ 12.021431] Monitor-Mwait will be used to enter C-1 state
[ 12.021431] Monitor-Mwait will be used to enter C-2 state
[ 12.021431] Monitor-Mwait will be used to enter C-3 state
[ 12.025122] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 12.028714] ACPI: ACPI0007:00 is registered as cooling_device0
[ 12.032329] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 12.039921] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
[ 12.044039] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
[ 12.049020] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 12.052710] ACPI: ACPI0007:01 is registered as cooling_device1
[ 12.056208] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 12.069590] input: Power Button (FF) as /class/input/input1
[ 12.105267] ACPI: Power Button (FF) [PWRF]
[ 12.116424] input: Lid Switch as /class/input/input2
[ 12.121522] ACPI: Lid Switch [LID0]
[ 12.123591] input: Power Button (CM) as /class/input/input3
[ 12.163378] ACPI: Power Button (CM) [PWRB]
[ 12.166800] input: Sleep Button (CM) as /class/input/input4
[ 12.197754] Marking TSC unstable due to: TSC halts in idle.
[ 12.222588] ACPI: Sleep Button (CM) [SLPB]
[ 12.235623] input: Video Bus as /class/input/input5
[ 12.276497] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.361398] USB Universal Host Controller Interface driver v3.0
[ 12.371377] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 12.375060] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 12.382255] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 12.415661] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 12.441658] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 12.481611] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 12.501506] usb usb1: configuration #1 chosen from 1 choice
[ 12.505760] hub 1-0:1.0: USB hub found
[ 12.509979] hub 1-0:1.0: 2 ports detected
[ 12.560699] ath_hal: module license 'Proprietary' taints kernel.
[ 12.571076] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
[ 12.658455] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 12.663180] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 12.667660] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 12.673372] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 12.692428] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 12.701076] usb usb2: configuration #1 chosen from 1 choice
[ 12.705849] hub 2-0:1.0: USB hub found
[ 12.710470] hub 2-0:1.0: 2 ports detected
[ 12.722133] wlan: svn r3692
[ 12.899234] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 12.928519] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 12.972063] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 12.982106] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 13.008346] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 13.008429] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 13.012090] usb usb3: configuration #1 chosen from 1 choice
[ 13.045776] hub 3-0:1.0: USB hub found
[ 13.089472] hub 3-0:1.0: 2 ports detected
[ 13.224639] ath_pci: svn r3692
[ 13.305949] usb 1-2: configuration #1 chosen from 1 choice
[ 13.305949] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 13.305949] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 13.305949] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 13.305949] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 13.305949] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 13.305949] usb usb4: configuration #1 chosen from 1 choice
[ 13.305949] hub 4-0:1.0: USB hub found
[ 13.305949] hub 4-0:1.0: 2 ports detected
[ 13.346373] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6
[ 13.411088] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 13.449075] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 13.490851] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 13.533470] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 13.581589] ehci_hcd 0000:00:1d.7: debug port 1
[ 13.612478] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 13.641323] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400
[ 13.839686] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 13.850355] usb usb5: configuration #1 chosen from 1 choice
[ 13.857385] hub 5-0:1.0: USB hub found
[ 13.866124] hub 5-0:1.0: 8 ports detected
[ 13.971270] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 13.976608] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 13.981851] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 14.102974] hda_codec: STAC922x, Apple subsys_id=106b1e00
[ 14.176589] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 14.263576] usb 1-2: USB disconnect, address 2
[ 14.296448] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 14.358177] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 14.358177] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 14.490743] MadWifi: ath_attach: HAL managed transmit power control (TPC) disabled.
[ 14.496314] MadWifi: ath_attach: Interference mitigation is supported. Currently disabled.
[ 14.506282] MadWifi: ath_attach: Switching rfkill capability off.
[ 14.546658] ath_rate_sample: 1.2 (svn r3692)
[ 14.573859] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 14.573865] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 14.581745] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 14.587317] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 14.593042] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 14.598789] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 14.600043] wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0)
[ 14.610039] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 14.611438] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 14.621439] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 14.626790] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 14.632141] wifi0: Use hw queue 4 for XR traffic
[ 14.637358] wifi0: Use hw queue 7 for UAPSD traffic
[ 14.642586] wifi0: Use hw queue 8 for CAB traffic
[ 14.647772] wifi0: Use hw queue 9 for beacons
[ 14.682269] ath_pci: wifi0: Atheros 5418: mem=0x50100000, irq=17
[ 15.409127] Clocksource tsc unstable (delta = -471324525 ns)
[ 15.645375] usb 5-4: new high speed USB device using ehci_hcd and address 3
[ 15.707627] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe2ad87e]
[ 15.798975] usb 5-4: configuration #1 chosen from 1 choice
[ 16.365085] usbcore: registered new interface driver appletouch
[ 16.659683] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 16.852995] usb 1-2: configuration #1 chosen from 1 choice
[ 16.868041] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7
[ 16.893490] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 16.906589] appletouch: Geyser mode initialized.
[ 16.906589] input: appletouch as /class/input/input8
[ 16.953472] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input9
[ 16.971687] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 17.268416] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 17.451629] usb 3-2: configuration #1 chosen from 1 choice
[ 17.471879] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
[ 17.762948] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 17.968128] usb 4-1: configuration #1 chosen from 1 choice
[ 18.005915] input: HID 05ac:1000 as /class/input/input10
[ 18.022579] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 18.048869] input: HID 05ac:1000 as /class/input/input11
[ 18.071857] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 18.081209] firmware: requesting isight.fw
[ 18.193720] usbcore: registered new interface driver isight_firmware
[ 18.268860] usb 5-4: USB disconnect, address 3
[ 18.578423] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 18.688626] applesmc: Apple MacBook Pro detected:
[ 18.697534] applesmc: - Model with accelerometer
[ 18.707533] applesmc: - Model with light sensors and backlight
[ 18.712595] applesmc: - Model with 12 temperature sensors
[ 18.776226] applesmc: device successfully initialized (0xe0, 0x00).
[ 18.781278] applesmc: device successfully initialized.
[ 18.786642] applesmc: 2 fans found.
[ 18.792458] input: applesmc as /class/input/input12
[ 18.823977] Registered led device: smc::kbd_backlight
[ 18.823977] applesmc: driver successfully loaded.
[ 18.891453] Linux agpgart interface v0.103
[ 18.979535] Symbol init_mm is marked as UNUSED, however this module is using it.
[ 18.987296] This symbol will go away in the future.
[ 18.992702] Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
[ 19.028169] [fglrx] Maximum main memory to use for locked dma buffers: 913 MBytes.
[ 19.033881] [fglrx] ASYNCIO init succeed!
[ 19.043173] [fglrx] PAT is enabled successfully!
[ 19.049001] [fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0
[ 19.303660] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.424437] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 19.490715] arp_tables: (C) 2002 David S. Miller
[ 19.577122] ieee80211_crypt: registered algorithm 'NULL'
[ 19.598501] ieee80211_crypt: registered algorithm 'TKIP'
[ 19.731398] usbcore: registered new interface driver uvcvideo
[ 19.736316] USB Video Class driver (SVN r212)
[ 19.789949] ipmi message handler version 39.2
[ 19.814233] IPMI Watchdog: driver initialized
[ 19.954278] Adding 2988048k swap on /dev/disk/by-uuid/c58cdc7c-b94b-4116-9cca-bf154269e4d8. Priority:-1 extents:1 across:2988048k
[ 20.093192] EXT3 FS on sda1, internal journal
[ 20.311474] usb 5-4: new high speed USB device using ehci_hcd and address 6
[ 20.490994] usb 5-4: configuration #1 chosen from 1 choice
[ 20.490994] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 20.491278] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 20.505932] input: Built-in iSight as /class/input/input13
[ 23.099315] appletouch: incomplete data package (first byte: 2, length: 4).
[ 25.084959] input: Pommed beeper device as /class/input/input14
[ 25.323686] Bluetooth: Core ver 2.11
[ 25.323686] NET: Registered protocol family 31
[ 25.323686] Bluetooth: HCI device and connection manager initialized
[ 25.323686] Bluetooth: HCI socket layer initialized
[ 25.354881] Bluetooth: L2CAP ver 2.9
[ 25.354881] Bluetooth: L2CAP socket layer initialized
[ 25.432255] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 25.456486] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[ 25.497277] Bluetooth: RFCOMM socket layer initialized
[ 25.497277] Bluetooth: RFCOMM TTY layer initialized
[ 25.497277] Bluetooth: RFCOMM ver 1.8
[ 25.805698] usb 4-1: USB disconnect, address 2
[ 26.149191] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 26.383342] usb 4-1: configuration #1 chosen from 1 choice
[ 26.475235] Bluetooth: HCI USB driver ver 2.9
[ 26.475235] usbcore: registered new interface driver hci_usb
[ 32.484907] CPA self-test:
[ 32.484963] 4k 0 large 224 gb 0 x 224[c0000000-f7c00000] miss 0
[ 32.512147] 4k 190464 large 38 gb 0 x 190502[c0000000-f7fff000] miss 0
[ 32.532426] 4k 190464 large 38 gb 0 x 190502[c0000000-f7fff000] miss 0
[ 32.532430] ok.
[ 33.009452] input: Apple Computer, Inc. Mighty Mouse as /class/input/input15
[ 37.327852] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 40.333644] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 40.333644] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[ 40.333644] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 40.414330] [fglrx] interrupt source 20008000 successfully enabled
[ 40.414330] [fglrx] enable ID = 0x00000008
[ 40.414330] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 40.434824] [fglrx] interrupt source 10000000 successfully enabled
[ 40.434824] [fglrx] enable ID = 0x00000009
[ 40.434824] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 241.313717] ACPI: EC: GPE storm detected, disabling EC GPE
[ 307.950881] PM: Syncing filesystems ... done.
[ 308.909560] Freezing user space processes ... (elapsed 0.23 seconds) done.
[ 309.142731] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 309.144205] Suspending console(s)
[ 309.233183] sd 2:0:1:0: [sda] Synchronizing SCSI cache
[ 309.233393] sd 2:0:1:0: [sda] Stopping disk
[ 310.212874] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 310.229584] [fglrx] firegl_gps_setpowerdown .
[ 310.259519] ACPI: PCI interrupt for device 0000:01:00.0 disabled
[ 310.271798] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 310.291829] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 310.291829] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 310.311246] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 310.311296] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 310.311343] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 310.311391] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 310.331196] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 310.530427] ACPI: Preparing to enter system sleep state S3
[ 310.630367] Disabling non-boot CPUs ...
[ 310.630392] CPU0 attaching NULL sched-domain.
[ 310.630396] CPU1 attaching NULL sched-domain.
[ 310.748552] CPU 1 is now offline
[ 310.748556] SMP alternatives: switching to UP code
[ 310.771762] CPU0 attaching NULL sched-domain.
[ 310.771762] CPU1 is down
[ 310.771762] Extended CMOS year: 2000
[ 310.771762] Intel machine check architecture supported.
[ 310.771762] Intel machine check reporting enabled on CPU#0.
[ 310.771762] Back to C!
[ 310.771762] Extended CMOS year: 2000
[ 310.771762] Enabling non-boot CPUs ...
[ 310.771762] CPU0 attaching NULL sched-domain.
[ 310.771762] SMP alternatives: switching to SMP code
[ 310.781762] Booting processor 1/1 ip 6000
[ 310.785333] Initializing CPU#1
[ 310.925093] Calibrating delay using timer specific routine.. 4322.52 BogoMIPS (lpj=21612614)
[ 310.925093] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 310.925093] CPU: L2 cache: 4096K
[ 310.925093] CPU: Physical Processor ID: 0
[ 310.925093] CPU: Processor Core ID: 1
[ 310.925093] Intel machine check architecture supported.
[ 310.925093] Intel machine check reporting enabled on CPU#1.
[ 310.935744] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 310.935783] CPU0 attaching sched-domain:
[ 310.935786] domain 0: span 0-1
[ 310.935787] groups: 0 1
[ 310.935793] CPU1 attaching sched-domain:
[ 310.935794] domain 0: span 0-1
[ 310.935796] groups: 1 0
[ 310.925093] CPU1 is up
[ 311.083288] Switched to high resolution mode on CPU 1
[ 326.634187] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b)
[ 326.634200] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0)
[ 326.634208] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001)
[ 326.634215] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030)
[ 326.634222] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 3030)
[ 326.634229] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100)
[ 326.634238] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040)
[ 326.634247] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007)
[ 326.634283] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 326.634293] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 326.634305] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b)
[ 326.634323] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000)
[ 326.634333] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002)
[ 326.653551] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
[ 326.653579] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004)
[ 326.653588] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40)
[ 326.653598] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 326.653631] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 326.653642] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 326.834442] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051)
[ 326.834452] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020)
[ 326.834460] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 2020)
[ 326.834475] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040)
[ 326.834486] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
[ 326.834553] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 326.834563] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 326.834598] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
[ 326.834607] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010)
[ 326.834615] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0)
[ 326.834630] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040)
[ 326.834641] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007)
[ 326.834698] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 326.834707] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 326.834741] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801)
[ 326.834750] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10)
[ 326.834759] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 1010)
[ 326.834773] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040)
[ 326.834784] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007)
[ 326.834841] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 326.834850] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 326.834862] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 326.834873] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 326.834939] usb usb1: root hub lost power or was reset
[ 326.834968] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 326.834983] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 326.835050] usb usb2: root hub lost power or was reset
[ 326.835074] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 326.835085] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 326.835148] usb usb3: root hub lost power or was reset
[ 326.835176] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 326.835191] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 326.835257] usb usb4: root hub lost power or was reset
[ 326.853760] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 326.853774] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 326.853863] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1)
[ 326.853872] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00)
[ 326.853881] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 228000f0)
[ 326.853899] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007)
[ 326.853929] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 326.854002] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b)
[ 326.854036] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005)
[ 326.854052] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 326.854062] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 326.876383] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b)
[ 326.876417] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)
[ 326.876443] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 326.876453] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 326.879817] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 326.879829] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 326.888708] [fglrx] firegl_gps_setpowerup .
[ 326.894044] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b)
[ 326.894044] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000)
[ 326.894044] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001)
[ 326.894044] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004)
[ 326.894044] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40)
[ 326.894044] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 100007)
[ 326.916324] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a)
[ 326.916361] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004)
[ 326.916371] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40)
[ 326.916383] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007)
[ 326.916434] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 326.916446] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 326.936482] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000)
[ 326.936493] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000)
[ 326.936502] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810)
[ 326.936514] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016)
[ 326.987481] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 326.991683] sd 2:0:1:0: [sda] Starting disk
[ 327.045720] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 327.045727] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out
[ 327.066033] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
[ 327.066039] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out
[ 327.086326] ata1.00: configured for UDMA/66
[ 327.106119] ata3.01: configured for UDMA/100
[ 327.125012] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 327.125079] sd 2:0:1:0: [sda] Write Protect is off
[ 327.125084] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 327.125186] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 327.981986] usb 1-2: reset full speed USB device using uhci_hcd and address 3
[ 328.152918] appletouch: Geyser mode initialized.
[ 328.289344] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 328.448872] applesmc: device has already been initialized (0xe0, 0x00).
[ 328.646922] usb 4-1: reset full speed USB device using uhci_hcd and address 3
[ 328.716830] Restarting tasks ... <6>usb 4-1: USB disconnect, address 3
[ 328.736616] done.
[ 328.776468] appletouch: incomplete data package (first byte: 2, length: 4).
[ 329.596421] end_request: I/O error, dev sr0, sector 6400
[ 329.596437] Buffer I/O error on device sr0, logical block 800
[ 329.596903] Buffer I/O error on device sr0, logical block 833
[ 329.596912] Buffer I/O error on device sr0, logical block 834
[ 329.596919] Buffer I/O error on device sr0, logical block 835
[ 329.596926] Buffer I/O error on device sr0, logical block 836
[ 329.596934] Buffer I/O error on device sr0, logical block 837
[ 329.596941] Buffer I/O error on device sr0, logical block 838
[ 329.596949] Buffer I/O error on device sr0, logical block 839
[ 329.596956] Buffer I/O error on device sr0, logical block 840
[ 329.596963] Buffer I/O error on device sr0, logical block 841
[ 329.717100] usb 4-1: new full speed USB device using uhci_hcd and address 4
[ 329.915016] usb 4-1: configuration #1 chosen from 1 choice
[ 329.932097] input: HID 05ac:1000 as /class/input/input16
[ 329.952567] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 329.975394] input: HID 05ac:1000 as /class/input/input17
[ 329.990416] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 420.204821] applesmc: wait status failed: 5 != 4
[ 420.414678] applesmc: wait status failed: c != 8
[ 434.205590] applesmc: wait status failed: 5 != 4
[ 434.410614] applesmc: wait status failed: c != 8
[ 525.252874] PM: Syncing filesystems ... done.
[ 526.105378] Freezing user space processes ... (elapsed 0.39 seconds) done.
[ 526.501388] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 526.504876] Suspending console(s)
[ 526.591894] sd 2:0:1:0: [sda] Synchronizing SCSI cache
[ 526.592114] sd 2:0:1:0: [sda] Stopping disk
[ 527.625699] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 527.642354] [fglrx] firegl_gps_setpowerdown .
[ 527.672773] ACPI: PCI interrupt for device 0000:01:00.0 disabled
[ 527.672971] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 527.692402] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 527.692585] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 527.712350] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 527.712399] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 527.712447] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 527.712495] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 527.732558] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 527.932293] ACPI: Preparing to enter system sleep state S3
[ 528.032405] Disabling non-boot CPUs ...
[ 528.032433] CPU0 attaching NULL sched-domain.
[ 528.032438] CPU1 attaching NULL sched-domain.
[ 528.159055] CPU 1 is now offline
[ 528.159059] SMP alternatives: switching to UP code
[ 528.180584] CPU0 attaching NULL sched-domain.
[ 528.181093] CPU1 is down
[ 528.181197] Extended CMOS year: 2000
[ 528.181197] Intel machine check architecture supported.
[ 528.181203] Intel machine check reporting enabled on CPU#0.
[ 528.181264] Back to C!
[ 528.181556] Extended CMOS year: 2000
[ 528.181652] Enabling non-boot CPUs ...
[ 528.181872] CPU0 attaching NULL sched-domain.
[ 528.182077] SMP alternatives: switching to SMP code
[ 528.191892] Booting processor 1/1 ip 6000
[ 528.199325] Initializing CPU#1
[ 528.339085] Calibrating delay using timer specific routine.. 4322.57 BogoMIPS (lpj=21612877)
[ 528.339085] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 528.339085] CPU: L2 cache: 4096K
[ 528.339085] CPU: Physical Processor ID: 0
[ 528.339085] CPU: Processor Core ID: 1
[ 528.339085] Intel machine check architecture supported.
[ 528.339085] Intel machine check reporting enabled on CPU#1.
[ 528.349788] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 528.349831] CPU0 attaching sched-domain:
[ 528.349833] domain 0: span 0-1
[ 528.349835] groups: 0 1
[ 528.349839] CPU1 attaching sched-domain:
[ 528.349841] domain 0: span 0-1
[ 528.349842] groups: 1 0
[ 528.339085] CPU1 is up
[ 528.497333] Switched to high resolution mode on CPU 1
[ 544.049029] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b)
[ 544.049043] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0)
[ 544.049051] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001)
[ 544.049058] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030)
[ 544.049065] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 20003030)
[ 544.049072] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100)
[ 544.049081] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040)
[ 544.049089] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007)
[ 544.049126] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 544.049135] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 544.049148] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b)
[ 544.049165] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000)
[ 544.049175] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002)
[ 544.068475] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
[ 544.068502] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004)
[ 544.068511] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40)
[ 544.068521] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 544.068554] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 544.068565] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 544.249381] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051)
[ 544.249391] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020)
[ 544.249400] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 20002020)
[ 544.249414] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040)
[ 544.249425] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
[ 544.249493] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 544.249503] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 544.249538] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
[ 544.249546] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010)
[ 544.249555] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing f0)
[ 544.249570] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040)
[ 544.249580] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007)
[ 544.249638] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 544.249647] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 544.249681] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801)
[ 544.249690] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10)
[ 544.249699] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 20001010)
[ 544.249713] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040)
[ 544.249724] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007)
[ 544.249780] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 544.249789] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 544.249802] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 544.249813] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 544.249880] usb usb1: root hub lost power or was reset
[ 544.249908] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 544.249923] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 544.249991] usb usb2: root hub lost power or was reset
[ 544.250015] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 544.250026] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 544.250091] usb usb3: root hub lost power or was reset
[ 544.250118] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 544.250134] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 544.250199] usb usb4: root hub lost power or was reset
[ 544.268711] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 544.268724] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 544.268814] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1)
[ 544.268823] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00)
[ 544.268832] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 28000f0)
[ 544.268850] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007)
[ 544.268880] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 544.268952] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b)
[ 544.268986] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005)
[ 544.269003] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 544.269012] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 544.291327] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b)
[ 544.291361] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)
[ 544.291388] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 544.291397] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 544.294764] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 544.294776] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 544.303663] [fglrx] firegl_gps_setpowerup .
[ 544.309001] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b)
[ 544.309001] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000)
[ 544.309001] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001)
[ 544.309001] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004)
[ 544.309001] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40)
[ 544.309001] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 40100007)
[ 544.331283] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a)
[ 544.331319] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004)
[ 544.331329] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40)
[ 544.331342] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007)
[ 544.331393] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 544.331404] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 544.351424] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000)
[ 544.351434] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000)
[ 544.351443] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810)
[ 544.351455] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016)
[ 544.402426] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 544.407625] sd 2:0:1:0: [sda] Starting disk
[ 544.460676] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 544.460683] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out
[ 544.481124] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
[ 544.481129] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out
[ 544.501423] ata1.00: configured for UDMA/66
[ 544.521349] ata3.01: configured for UDMA/100
[ 544.538428] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 544.538428] sd 2:0:1:0: [sda] Write Protect is off
[ 544.538428] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 544.538428] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 545.386246] usb 1-2: reset full speed USB device using uhci_hcd and address 3
[ 545.556213] appletouch: Geyser mode initialized.
[ 545.693690] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 545.912156] applesmc: device has already been initialized (0xe0, 0x00).
[ 546.112339] usb 4-1: reset full speed USB device using uhci_hcd and address 4
[ 546.321535] Restarting tasks ... done.
[ 550.407833] end_request: I/O error, dev sr0, sector 28928
[ 550.407842] __ratelimit: 24 messages suppressed
[ 550.407845] Buffer I/O error on device sr0, logical block 3616
[ 550.407853] Buffer I/O error on device sr0, logical block 3617
[ 550.407857] Buffer I/O error on device sr0, logical block 3618
[ 550.407860] Buffer I/O error on device sr0, logical block 3619
[ 550.407864] Buffer I/O error on device sr0, logical block 3620
[ 550.407867] Buffer I/O error on device sr0, logical block 3621
[ 550.407871] Buffer I/O error on device sr0, logical block 3622
[ 550.407874] Buffer I/O error on device sr0, logical block 3623
[ 550.407878] Buffer I/O error on device sr0, logical block 3624
[ 550.407881] Buffer I/O error on device sr0, logical block 3625
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-06-12 2:13 ` Justin Mattock
@ 2008-06-12 4:15 ` Tejun Heo
2008-06-12 5:22 ` Justin Mattock
0 siblings, 1 reply; 18+ messages in thread
From: Tejun Heo @ 2008-06-12 4:15 UTC (permalink / raw)
To: Justin Mattock; +Cc: Andrew Morton, linux-kernel, linux-ide
[-- Attachment #1: Type: text/plain, Size: 292 bytes --]
Hello,
Please do the followings.
1. apply the attached patch
2. turn on device drivers -> SCSI -> SCSI verbose logging
3. rebuild the kernel and boot the new kernel.
4. run "sysctl -w dev.scsi.logging_level=1"
5. run the suspend/resume test w/ dd and report the result.
Thanks.
--
tejun
[-- Attachment #2: debug --]
[-- Type: text/plain, Size: 852 bytes --]
---
drivers/ata/libata-eh.c | 6 ++++++
1 file changed, 6 insertions(+)
Index: work/drivers/ata/libata-eh.c
===================================================================
--- work.orig/drivers/ata/libata-eh.c
+++ work/drivers/ata/libata-eh.c
@@ -2507,6 +2507,9 @@ static int atapi_eh_clear_ua(struct ata_
return -EIO;
}
+ ata_dev_printk(dev, KERN_WARNING, "XXX: TUR err_mask=0x%x sense_key=0x%x\n",
+ err_mask, sense_key);
+
if (!err_mask || sense_key != UNIT_ATTENTION)
return 0;
@@ -2516,6 +2519,9 @@ static int atapi_eh_clear_ua(struct ata_
"UNIT ATTENTION (err_mask=0x%x)\n", err_mask);
return -EIO;
}
+
+ ata_dev_printk(dev, KERN_WARNING, "XXX: REQUEST SENSE err_mask=0x%x ASC=0x%x ASCQ=0x%x\n",
+ err_mask, sense_buffer[12], sense_buffer[13]);
}
ata_dev_printk(dev, KERN_WARNING,
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-06-12 4:15 ` Tejun Heo
@ 2008-06-12 5:22 ` Justin Mattock
2008-06-12 6:15 ` Justin Mattock
0 siblings, 1 reply; 18+ messages in thread
From: Justin Mattock @ 2008-06-12 5:22 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
On Thu, Jun 12, 2008 at 4:15 AM, Tejun Heo <htejun@gmail.com> wrote:
> Hello,
>
> Please do the followings.
>
> 1. apply the attached patch
> 2. turn on device drivers -> SCSI -> SCSI verbose logging
> 3. rebuild the kernel and boot the new kernel.
> 4. run "sysctl -w dev.scsi.logging_level=1"
> 5. run the suspend/resume test w/ dd and report the result.
>
> Thanks.
>
> --
> tejun
>
> ---
> drivers/ata/libata-eh.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> Index: work/drivers/ata/libata-eh.c
> ===================================================================
> --- work.orig/drivers/ata/libata-eh.c
> +++ work/drivers/ata/libata-eh.c
> @@ -2507,6 +2507,9 @@ static int atapi_eh_clear_ua(struct ata_
> return -EIO;
> }
>
> + ata_dev_printk(dev, KERN_WARNING, "XXX: TUR err_mask=0x%x sense_key=0x%x\n",
> + err_mask, sense_key);
> +
> if (!err_mask || sense_key != UNIT_ATTENTION)
> return 0;
>
> @@ -2516,6 +2519,9 @@ static int atapi_eh_clear_ua(struct ata_
> "UNIT ATTENTION (err_mask=0x%x)\n", err_mask);
> return -EIO;
> }
> +
> + ata_dev_printk(dev, KERN_WARNING, "XXX: REQUEST SENSE err_mask=0x%x ASC=0x%x ASCQ=0x%x\n",
> + err_mask, sense_buffer[12], sense_buffer[13]);
> }
>
> ata_dev_printk(dev, KERN_WARNING,
>
>
Alright; I'll let you know what happens.
regards;
--
Justin P. Mattock
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-06-12 5:22 ` Justin Mattock
@ 2008-06-12 6:15 ` Justin Mattock
2008-06-12 6:26 ` Tejun Heo
0 siblings, 1 reply; 18+ messages in thread
From: Justin Mattock @ 2008-06-12 6:15 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
[-- Attachment #1: Type: text/plain, Size: 2137 bytes --]
On Thu, Jun 12, 2008 at 5:22 AM, Justin Mattock <justinmattock@gmail.com> wrote:
> On Thu, Jun 12, 2008 at 4:15 AM, Tejun Heo <htejun@gmail.com> wrote:
>> Hello,
>>
>> Please do the followings.
>>
>> 1. apply the attached patch
>> 2. turn on device drivers -> SCSI -> SCSI verbose logging
>> 3. rebuild the kernel and boot the new kernel.
>> 4. run "sysctl -w dev.scsi.logging_level=1"
>> 5. run the suspend/resume test w/ dd and report the result.
>>
>> Thanks.
>>
>> --
>> tejun
>>
>> ---
>> drivers/ata/libata-eh.c | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> Index: work/drivers/ata/libata-eh.c
>> ===================================================================
>> --- work.orig/drivers/ata/libata-eh.c
>> +++ work/drivers/ata/libata-eh.c
>> @@ -2507,6 +2507,9 @@ static int atapi_eh_clear_ua(struct ata_
>> return -EIO;
>> }
>>
>> + ata_dev_printk(dev, KERN_WARNING, "XXX: TUR err_mask=0x%x sense_key=0x%x\n",
>> + err_mask, sense_key);
>> +
>> if (!err_mask || sense_key != UNIT_ATTENTION)
>> return 0;
>>
>> @@ -2516,6 +2519,9 @@ static int atapi_eh_clear_ua(struct ata_
>> "UNIT ATTENTION (err_mask=0x%x)\n", err_mask);
>> return -EIO;
>> }
>> +
>> + ata_dev_printk(dev, KERN_WARNING, "XXX: REQUEST SENSE err_mask=0x%x ASC=0x%x ASCQ=0x%x\n",
>> + err_mask, sense_buffer[12], sense_buffer[13]);
>> }
>>
>> ata_dev_printk(dev, KERN_WARNING,
>>
>>
>
> Alright; I'll let you know what happens.
> regards;
>
> --
> Justin P. Mattock
>
O.K. applied the patch and did what you have described,(except for
sysctl -w / ended up inserting dev.scsi.logging_level=1 in
/etc/sysctl.conf)
This is what dd reported:(same as before)
dd: reading `/dev/sr0':Input/output error
41+1 records in
41+1 records out
43122688 bytes (43 MB) copied, 41.0967 seconds, 1.0 MB/s
Attached is dmesg of using dd on the first suspend, and playing a dvd
on the second.
regards;
--
Justin P. Mattock
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 65119 bytes --]
[ 0.000000] Linux version 2.6.26-rc5-00017-g1242292 (root@unix) (gcc version 4.2.3 (Debian 4.2.3-3)) #11 SMP Thu Jun 12 05:45:17 UTC 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable)
[ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] 112MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 258282) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 258282
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 258282
[ 0.000000] On node 0 totalpages: 258282
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 226 pages used for memmap
[ 0.000000] HighMem zone: 28680 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
[ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
[ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309)
[ 0.000000] ACPI: FACS 3FEC0000, 0040
[ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
[ 0.000000] ACPI: DMI detected: Apple
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 46760 bytes of per cpu data
[ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256264
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash vga=773 selinux=1 audit=1 enforcing=1 debug acpi_osi=Linux pnpacpi=off pci=routeirq usbcore.autosuspend=1 nmi_watchdog=0
[ 0.000000] audit: enabled (after initialization)
[ 0.000000] ACPI: Added _OSI(Linux)
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Detected 2161.309 MHz processor.
[ 0.010000] Console: colour dummy device 80x25
[ 0.010000] console [tty0] enabled
[ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.010000] Memory: 1018672k/1033128k available (2564k kernel code, 13840k reserved, 1315k data, 328k init, 115624k highmem)
[ 0.010000] virtual kernel memory layout:
[ 0.010000] fixmap : 0xfff7e000 - 0xfffff000 ( 516 kB)
[ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.010000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.010000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.010000] .init : 0xc04cf000 - 0xc0521000 ( 328 kB)
[ 0.010000] .data : 0xc038113d - 0xc04c9dac (1315 kB)
[ 0.010000] .text : 0xc0100000 - 0xc038113d (2564 kB)
[ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.010000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.010000] hpet clockevent registered
[ 0.159747] Calibrating delay using timer specific routine.. 4327.95 BogoMIPS (lpj=21639750)
[ 0.159837] Security Framework initialized
[ 0.159849] SELinux: Initializing.
[ 0.159872] SELinux: Starting in enforcing mode
[ 0.159885] selinux_register_security: Registering secondary module capability
[ 0.159898] Capability LSM initialized as secondary
[ 0.159942] Mount-cache hash table entries: 512
[ 0.160000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.160000] CPU: L2 cache: 4096K
[ 0.160000] CPU: Physical Processor ID: 0
[ 0.160000] CPU: Processor Core ID: 0
[ 0.160000] Intel machine check architecture supported.
[ 0.160000] Intel machine check reporting enabled on CPU#0.
[ 0.160000] using mwait in idle threads.
[ 0.160000] Checking 'hlt' instruction... OK.
[ 0.200000] ACPI: Core revision 20080321
[ 0.227971] ENABLING IO-APIC IRQs
[ 0.228195] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.328179] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 0.330000] Booting processor 1/1 ip 6000
[ 0.340000] Initializing CPU#1
[ 0.340000] Calibrating delay using timer specific routine.. 4322.58 BogoMIPS (lpj=21612947)
[ 0.340000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.340000] CPU: L2 cache: 4096K
[ 0.340000] CPU: Physical Processor ID: 0
[ 0.340000] CPU: Processor Core ID: 1
[ 0.340000] Intel machine check architecture supported.
[ 0.340000] Intel machine check reporting enabled on CPU#1.
[ 0.490000] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 0.490000] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.490036] Brought up 2 CPUs
[ 0.490046] Total of 2 processors activated (8650.53 BogoMIPS).
[ 0.490080] CPU0 attaching sched-domain:
[ 0.490090] domain 0: span 0-1
[ 0.490098] groups: 0 1
[ 0.490114] CPU1 attaching sched-domain:
[ 0.490123] domain 0: span 0-1
[ 0.490131] groups: 1 0
[ 0.500000] net_namespace: 516 bytes
[ 0.500000] Booting paravirtualized kernel on bare hardware
[ 0.500000] NET: Registered protocol family 16
[ 0.500000] No dock devices found.
[ 0.500000] EISA bus registered
[ 0.500000] ACPI: bus type pci registered
[ 0.500000] PCI: Using configuration type 1 for base access
[ 0.500000] Setting up standard PCI resources
[ 0.510000] ACPI: EC: EC description table is found, configuring boot EC
[ 0.510000] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.530000] ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.531624] ACPI: Interpreter enabled
[ 0.531634] ACPI: (supports S0 S3 S4 S5)
[ 0.531760] ACPI: Using IOAPIC for interrupt routing
[ 0.580000] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.580000] ACPI: EC: driver started in interrupt mode
[ 0.580000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.580000] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.580000] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.580000] PCI: Transparent bridge - 0000:00:1e.0
[ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.581000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.581989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.585772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.632749] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.632749] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.632749] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.632749] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.632749] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.632749] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.632749] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.632749] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.632749] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.632749] pnp: PnP ACPI: disabled
[ 0.632749] SCSI subsystem initialized
[ 0.632749] libata version 3.00 loaded.
[ 0.632749] usbcore: registered new interface driver usbfs
[ 0.632749] usbcore: registered new interface driver hub
[ 0.632749] usbcore: registered new device driver usb
[ 0.642749] PCI: Using ACPI for IRQ routing
[ 0.642749] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
[ 0.642749] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.642749] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.642749] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 0.642749] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.642749] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.642749] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.642749] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 0.642749] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.642749] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.642749] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 0.642749] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 0.642749] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.642749] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.642749] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.642749] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.642749] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.642749] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.642749] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.662511] NetLabel: Initializing
[ 0.662520] NetLabel: domain hash size = 128
[ 0.662528] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.662670] NetLabel: unlabeled traffic allowed by default
[ 0.662688] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.662704] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.671367] Switched to high resolution mode on CPU 0
[ 0.674077] Switched to high resolution mode on CPU 1
[ 0.715225] PCI: Bridge: 0000:00:01.0
[ 0.715225] IO window: 3000-3fff
[ 0.715225] MEM window: 0x50300000-0x503fffff
[ 0.715225] PREFETCH window: 0x0000000040000000-0x0000000047ffffff
[ 0.715225] PCI: Bridge: 0000:00:1c.0
[ 0.715225] IO window: 2000-2fff
[ 0.715225] MEM window: 0x50200000-0x502fffff
[ 0.715225] PREFETCH window: 0x0000000050500000-0x00000000505fffff
[ 0.715225] PCI: Bridge: 0000:00:1c.1
[ 0.715225] IO window: disabled.
[ 0.715225] MEM window: 0x50100000-0x501fffff
[ 0.715225] PREFETCH window: disabled.
[ 0.715225] PCI: Bridge: 0000:00:1c.2
[ 0.715225] IO window: 1000-1fff
[ 0.715225] MEM window: 0x4c100000-0x500fffff
[ 0.715225] PREFETCH window: 0x0000000048000000-0x000000004bffffff
[ 0.715225] PCI: Bridge: 0000:00:1e.0
[ 0.715225] IO window: disabled.
[ 0.715225] MEM window: 0x4c000000-0x4c0fffff
[ 0.715225] PREFETCH window: disabled.
[ 0.715225] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.715225] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.715225] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.715225] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.715225] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.715225] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.715225] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.715225] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.715225] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.715225] NET: Registered protocol family 2
[ 0.745366] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.745905] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.746635] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[ 0.747609] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.747621] TCP reno registered
[ 0.755470] NET: Registered protocol family 1
[ 0.775224] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[ 0.775224] Initializing RT-Tester: OK
[ 0.775224] audit: initializing netlink socket (enabled)
[ 0.775224] type=2000 audit(1213250471.751:1): initialized
[ 0.785225] highmem bounce pool size: 64 pages
[ 0.785225] Total HugeTLB memory allocated, 0
[ 0.820404] fuse init (API version 7.9)
[ 0.820404] msgmni has been set to 1764 for ipc namespace c04a3e80
[ 0.820404] SELinux: Registering netfilter hooks
[ 0.820668] io scheduler noop registered
[ 0.830174] io scheduler cfq registered (default)
[ 0.830174] pci 0000:01:00.0: Boot video device
[ 0.830174] vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 1536k, total 16384k
[ 0.830174] vesafb: mode is 1024x768x8, linelength=1024, pages=18
[ 0.830174] vesafb: protected mode interface info at c000:ad0c
[ 0.830174] vesafb: pmi: set display start = c00cad94, set palette = c00cae50
[ 0.830174] vesafb: scrolling: redraw
[ 0.830174] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 0.847140] Console: switching to colour frame buffer device 128x48
[ 0.860172] fb0: VESA VGA frame buffer device
[ 0.860172] power_supply ADP1: uevent
[ 0.860172] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 0.860172] power_supply ADP1: Static prop TYPE=Mains
[ 0.860172] power_supply ADP1: 1 dynamic props
[ 0.860172] power_supply ADP1: prop ONLINE=1
[ 0.860173] power_supply ADP1: power_supply_changed
[ 0.860173] ACPI: AC Adapter [ADP1] (on-line)
[ 0.860173] power_supply ADP1: power_supply_changed_work
[ 0.860173] power_supply ADP1: power_supply_update_gen_leds 1
[ 0.860173] power_supply ADP1: uevent
[ 0.860173] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 0.860173] power_supply ADP1: Static prop TYPE=Mains
[ 0.860173] power_supply ADP1: 1 dynamic props
[ 0.860173] power_supply ADP1: prop ONLINE=1
[ 0.869287] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.899266] hpet_resources: 0xfed00000 is busy
[ 0.909267] loop: module loaded
[ 0.909278] Linux video capture interface: v2.00
[ 0.914478] input: Macintosh mouse button emulation as /class/input/input0
[ 0.920436] Driver 'sd' needs updating - please use bus_type methods
[ 0.925773] Driver 'sr' needs updating - please use bus_type methods
[ 0.931630] ata_piix 0000:00:1f.1: version 2.12
[ 0.931630] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.940524] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 0.946094] scsi0 : ata_piix
[ 0.957337] scsi1 : ata_piix
[ 0.963469] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
[ 0.963469] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
[ 1.151574] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66
[ 1.191513] ata1.00: configured for UDMA/66
[ 1.206602] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x2
[ 1.380970] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5
[ 1.395315] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.395315] Uniform CD-ROM driver Revision: 3.20
[ 1.409112] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.409112] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.409112] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.415731] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 1.575304] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.585277] scsi2 : ata_piix
[ 1.595865] scsi3 : ata_piix
[ 1.597416] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
[ 1.605278] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
[ 1.787593] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
[ 1.787593] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.836842] ata3.01: configured for UDMA/100
[ 2.008144] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
[ 2.008144] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 2.022994] sd 2:0:1:0: [sda] Write Protect is off
[ 2.028585] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.034270] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.040290] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 2.050116] sd 2:0:1:0: [sda] Write Protect is off
[ 2.055984] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.061976] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.068155] sda: sda1 sda2 < sda5 >
[ 2.081002] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.081002] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 2.095289] usbcore: registered new interface driver usblcd
[ 2.101866] usbcore: registered new interface driver usbled
[ 2.108023] PNP: No PS/2 controller found. Probing ports directly.
[ 2.115969] i8042.c: No controller found.
[ 2.135139] mice: PS/2 mouse device common for all mice
[ 2.135139] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 2.145156] EDAC MC: Ver: 2.1.0 Jun 5 2008
[ 2.157423] cpuidle: using governor ladder
[ 2.157423] cpuidle: using governor menu
[ 2.167457] usbcore: registered new interface driver hiddev
[ 2.178538] usbcore: registered new interface driver usbhid
[ 2.178538] usbhid: v2.6:USB HID core driver
[ 2.190828] Advanced Linux Sound Architecture Driver Version 1.0.16.
[ 2.190828] ALSA device list:
[ 2.198525] No soundcards found.
[ 2.210970] oprofile: using NMI interrupt.
[ 2.210970] IPVS: Registered protocols (TCP, AH, ESP)
[ 2.222191] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 2.228228] IPVS: ipvs loaded.
[ 2.236523] Initializing XFRM netlink socket
[ 2.242567] NET: Registered protocol family 17
[ 2.248524] NET: Registered protocol family 15
[ 2.254366] Using IPI No-Shortcut mode
[ 2.268538] kjournald starting. Commit interval 5 seconds
[ 2.266094] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.266094] VFS: Mounted root (ext3 filesystem) readonly.
[ 2.266094] Freeing unused kernel memory: 328k freed
[ 3.089302] SELinux: 8192 avtab hash slots, 205740 rules.
[ 3.373913] SELinux: 8192 avtab hash slots, 205740 rules.
[ 3.739319] SELinux: 7 users, 7 roles, 3017 types, 90 bools
[ 3.743914] SELinux: 72 classes, 205740 rules
[ 3.763395] SELinux: Completing initialization.
[ 3.768974] SELinux: Setting up existing superblocks.
[ 3.785288] SELinux: initialized (dev sda1, type ext3), uses xattr
[ 3.874504] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 3.965622] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 3.965622] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
[ 3.971268] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 3.976868] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
[ 3.982382] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 3.987910] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 3.993548] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 3.999253] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 4.007910] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 4.013616] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 4.019280] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 4.024857] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 4.030365] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 4.082841] SELinux: policy loaded with handle_unknown=deny
[ 4.090289] type=1403 audit(1213250474.960:2): policy loaded auid=4294967295 ses=4294967295
[ 5.275811] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.297281] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 11.224581] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 11.541652] power_supply ADP1: uevent
[ 11.553649] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 11.563795] power_supply ADP1: Static prop TYPE=Mains
[ 11.569666] power_supply ADP1: 1 dynamic props
[ 11.575539] power_supply ADP1: prop ONLINE=1
[ 13.855810] input: Power Button (FF) as /class/input/input1
[ 13.906165] ACPI: Power Button (FF) [PWRF]
[ 13.915146] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309)
[ 13.922636] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
[ 13.941084] Monitor-Mwait will be used to enter C-1 state
[ 13.947001] Monitor-Mwait will be used to enter C-2 state
[ 13.952751] Monitor-Mwait will be used to enter C-3 state
[ 13.960407] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 13.965793] ACPI: ACPI0007:00 is registered as cooling_device0
[ 13.971532] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 13.977766] input: Lid Switch as /class/input/input2
[ 13.983752] ACPI: Lid Switch [LID0]
[ 13.990508] input: Power Button (CM) as /class/input/input3
[ 14.035117] ACPI: Power Button (CM) [PWRB]
[ 14.035117] input: Sleep Button (CM) as /class/input/input4
[ 14.087370] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
[ 14.096120] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
[ 14.120418] ACPI: Sleep Button (CM) [SLPB]
[ 14.188290] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 14.194369] ACPI: ACPI0007:01 is registered as cooling_device1
[ 14.201163] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 14.258972] USB Universal Host Controller Interface driver v3.0
[ 14.264610] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 14.270651] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 14.280524] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 14.288973] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 14.295267] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 14.301841] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 14.308970] usb usb1: configuration #1 chosen from 1 choice
[ 14.315332] hub 1-0:1.0: USB hub found
[ 14.321884] hub 1-0:1.0: 2 ports detected
[ 14.408354] input: Video Bus as /class/input/input5
[ 14.429725] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 14.435944] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 14.446201] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.452295] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 14.458350] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 14.468700] usb usb2: configuration #1 chosen from 1 choice
[ 14.474294] hub 2-0:1.0: USB hub found
[ 14.480323] hub 2-0:1.0: 2 ports detected
[ 14.494093] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 14.593496] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 14.593496] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 14.603479] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.609830] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 14.616407] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 14.626638] usb usb3: configuration #1 chosen from 1 choice
[ 14.632750] hub 3-0:1.0: USB hub found
[ 14.639112] hub 3-0:1.0: 2 ports detected
[ 14.695270] Marking TSC unstable due to: TSC halts in idle.
[ 14.760255] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 14.760255] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 14.770237] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 14.780356] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 14.786767] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 14.793661] usb usb4: configuration #1 chosen from 1 choice
[ 14.800283] hub 4-0:1.0: USB hub found
[ 14.806713] hub 4-0:1.0: 2 ports detected
[ 14.813068] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 14.920254] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 14.925233] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 14.987941] ath_hal: module license 'Proprietary' taints kernel.
[ 15.005619] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
[ 15.021357] hda_codec: STAC922x, Apple subsys_id=106b1e00
[ 15.021357] usb 1-2: configuration #1 chosen from 1 choice
[ 15.033500] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6
[ 15.110169] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 15.114601] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 15.124816] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 15.124816] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7
[ 15.140988] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 15.149636] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 15.164938] ehci_hcd 0000:00:1d.7: debug port 1
[ 15.168534] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 15.173385] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400
[ 15.187626] wlan: svn r3692
[ 15.260527] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 15.271188] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 15.271500] usb usb5: configuration #1 chosen from 1 choice
[ 15.271631] hub 5-0:1.0: USB hub found
[ 15.271654] hub 5-0:1.0: 8 ports detected
[ 15.416154] ath_pci: svn r3692
[ 15.456168] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 15.519122] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 15.567827] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 15.574124] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 15.711389] MadWifi: ath_attach: HAL managed transmit power control (TPC) disabled.
[ 15.719520] MadWifi: ath_attach: Interference mitigation is supported. Currently disabled.
[ 15.730951] MadWifi: ath_attach: Switching rfkill capability off.
[ 15.887742] usb 1-2: USB disconnect, address 2
[ 15.909367] ath_rate_sample: 1.2 (svn r3692)
[ 16.039550] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 16.049367] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 16.056150] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 16.066150] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 16.074565] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 16.082986] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 16.091295] wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0)
[ 16.099626] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 16.106231] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 16.116232] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 16.124429] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 16.132467] wifi0: Use hw queue 4 for XR traffic
[ 16.140325] wifi0: Use hw queue 7 for UAPSD traffic
[ 16.145746] wifi0: Use hw queue 8 for CAB traffic
[ 16.155748] wifi0: Use hw queue 9 for beacons
[ 16.631192] ath_pci: wifi0: Atheros 5418: mem=0x50100000, irq=17
[ 16.887569] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe2ad87e]
[ 17.328442] usb 5-4: new high speed USB device using ehci_hcd and address 3
[ 17.479683] usb 5-4: configuration #1 chosen from 1 choice
[ 18.051006] usbcore: registered new interface driver appletouch
[ 18.332829] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 18.579430] usb 1-2: configuration #1 chosen from 1 choice
[ 18.594708] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input8
[ 18.634828] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 18.650365] appletouch: Geyser mode initialized.
[ 18.651615] input: appletouch as /class/input/input9
[ 18.688715] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input10
[ 18.716983] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 19.029920] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 19.222871] usb 3-2: configuration #1 chosen from 1 choice
[ 19.237996] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
[ 19.284168] Clocksource tsc unstable (delta = -311482197 ns)
[ 19.525524] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 19.727361] usb 4-1: configuration #1 chosen from 1 choice
[ 19.758767] drivers/hid/usbhid/hid-core.c: couldn't find an input interrupt endpoint
[ 19.771205] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 19.784027] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 19.804606] input: Built-in iSight as /class/input/input11
[ 19.875298] usbcore: registered new interface driver uvcvideo
[ 19.884711] USB Video Class driver (SVN r212)
[ 20.582986] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 20.746584] applesmc: Apple MacBook Pro detected:
[ 20.760798] applesmc: - Model with accelerometer
[ 20.768735] applesmc: - Model with light sensors and backlight
[ 20.775756] applesmc: - Model with 12 temperature sensors
[ 20.784272] applesmc: device has already been initialized (0xe0, 0x00).
[ 20.791300] applesmc: device successfully initialized.
[ 20.798656] applesmc: 2 fans found.
[ 20.806616] input: applesmc as /class/input/input12
[ 20.816618] usb 5-4: usbfs: USBDEVFS_CONTROL failed cmd ift-load rqt 64 rq 160 len 1 ret -71
[ 20.813754] usb 5-4: USB disconnect, address 3
[ 20.870779] Registered led device: smc::kbd_backlight
[ 20.870779] applesmc: driver successfully loaded.
[ 20.894080] usb 5-4: usbfs: USBDEVFS_CONTROL failed cmd ift-load rqt 64 rq 160 len 1 ret -71
[ 20.939381] Linux agpgart interface v0.103
[ 21.026863] Symbol init_mm is marked as UNUSED, however this module is using it.
[ 21.034750] This symbol will go away in the future.
[ 21.042457] Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
[ 21.099652] [fglrx] Maximum main memory to use for locked dma buffers: 913 MBytes.
[ 21.112421] [fglrx] ASYNCIO init succeed!
[ 21.123945] [fglrx] PAT is enabled successfully!
[ 21.136085] [fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0
[ 21.566176] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.702905] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 21.769443] arp_tables: (C) 2002 David S. Miller
[ 21.842609] ieee80211_crypt: registered algorithm 'NULL'
[ 21.872228] ieee80211_crypt: registered algorithm 'TKIP'
[ 22.032552] usbcore: registered new interface driver isight_firmware
[ 22.088987] ipmi message handler version 39.2
[ 22.128610] IPMI Watchdog: driver initialized
[ 22.373471] Adding 2988048k swap on /dev/disk/by-uuid/c58cdc7c-b94b-4116-9cca-bf154269e4d8. Priority:-1 extents:1 across:2988048k
[ 22.583172] EXT3 FS on sda1, internal journal
[ 22.846319] usb 5-4: new high speed USB device using ehci_hcd and address 6
[ 23.032778] usb 5-4: configuration #1 chosen from 1 choice
[ 23.032778] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 23.049417] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 23.071214] input: Built-in iSight as /class/input/input13
[ 27.370941] appletouch: incomplete data package (first byte: 2, length: 4).
[ 29.370251] input: Pommed beeper device as /class/input/input14
[ 29.636131] Bluetooth: Core ver 2.11
[ 29.654885] NET: Registered protocol family 31
[ 29.654885] Bluetooth: HCI device and connection manager initialized
[ 29.654885] Bluetooth: HCI socket layer initialized
[ 29.723116] Bluetooth: L2CAP ver 2.9
[ 29.723116] Bluetooth: L2CAP socket layer initialized
[ 29.823473] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 29.860858] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[ 29.907328] Bluetooth: RFCOMM socket layer initialized
[ 29.907328] Bluetooth: RFCOMM TTY layer initialized
[ 29.907328] Bluetooth: RFCOMM ver 1.8
[ 30.217404] usb 4-1: USB disconnect, address 2
[ 30.515871] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 30.767818] usb 4-1: configuration #1 chosen from 1 choice
[ 31.030575] Bluetooth: HCI USB driver ver 2.9
[ 31.037979] usbcore: registered new interface driver hci_usb
[ 33.102759] CPA self-test:
[ 33.102823] 4k 0 large 224 gb 0 x 224[c0000000-f7c00000] miss 0
[ 33.119333] 4k 189440 large 39 gb 0 x 189479[c0000000-f7fff000] miss 0
[ 33.141737] 4k 189440 large 39 gb 0 x 189479[c0000000-f7fff000] miss 0
[ 33.141744] ok.
[ 38.848137] input: Apple Computer, Inc. Mighty Mouse as /class/input/input15
[ 42.947467] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 46.225847] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 46.225858] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[ 46.225864] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 46.367469] [fglrx] interrupt source 20008000 successfully enabled
[ 46.367479] [fglrx] enable ID = 0x00000008
[ 46.367493] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 46.367682] [fglrx] interrupt source 10000000 successfully enabled
[ 46.367687] [fglrx] enable ID = 0x00000009
[ 46.367697] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 290.071272] PM: Syncing filesystems ... done.
[ 291.102146] Freezing user space processes ... (elapsed 0.17 seconds) done.
[ 291.276098] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 291.276251] Suspending console(s)
[ 291.363215] sd 2:0:1:0: [sda] Synchronizing SCSI cache
[ 291.363431] sd 2:0:1:0: [sda] Stopping disk
[ 292.336924] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 292.353620] [fglrx] firegl_gps_setpowerdown .
[ 292.384507] ACPI: PCI interrupt for device 0000:01:00.0 disabled
[ 292.393982] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 292.414009] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 292.414009] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 292.433416] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 292.433466] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 292.433513] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 292.433561] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 292.453376] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 292.652605] ACPI: Preparing to enter system sleep state S3
[ 292.752546] Disabling non-boot CPUs ...
[ 292.752571] CPU0 attaching NULL sched-domain.
[ 292.752575] CPU1 attaching NULL sched-domain.
[ 292.869368] CPU 1 is now offline
[ 292.869372] SMP alternatives: switching to UP code
[ 292.890179] CPU0 attaching NULL sched-domain.
[ 292.890827] CPU1 is down
[ 292.890931] Extended CMOS year: 2000
[ 292.890931] Intel machine check architecture supported.
[ 292.890937] Intel machine check reporting enabled on CPU#0.
[ 292.890999] Back to C!
[ 292.891290] Extended CMOS year: 2000
[ 292.891386] Enabling non-boot CPUs ...
[ 292.891603] CPU0 attaching NULL sched-domain.
[ 292.891836] SMP alternatives: switching to SMP code
[ 292.901433] Booting processor 1/1 ip 6000
[ 292.909621] Initializing CPU#1
[ 293.049381] Calibrating delay using timer specific routine.. 4322.51 BogoMIPS (lpj=21612570)
[ 293.049381] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 293.049381] CPU: L2 cache: 4096K
[ 293.049381] CPU: Physical Processor ID: 0
[ 293.049381] CPU: Processor Core ID: 1
[ 293.049381] Intel machine check architecture supported.
[ 293.049381] Intel machine check reporting enabled on CPU#1.
[ 293.060072] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 293.060111] CPU0 attaching sched-domain:
[ 293.060114] domain 0: span 0-1
[ 293.060115] groups: 0 1
[ 293.060120] CPU1 attaching sched-domain:
[ 293.060122] domain 0: span 0-1
[ 293.060124] groups: 1 0
[ 293.049381] CPU1 is up
[ 293.199386] Switched to high resolution mode on CPU 1
[ 293.844194] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 293.873763] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b)
[ 293.873776] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0)
[ 293.873783] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001)
[ 293.873790] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030)
[ 293.873798] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 3030)
[ 293.873805] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100)
[ 293.873814] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040)
[ 293.873822] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007)
[ 293.873859] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 293.873868] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 293.873881] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b)
[ 293.873899] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000)
[ 293.873908] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002)
[ 293.891076] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
[ 293.891105] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004)
[ 293.891144] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40)
[ 293.891155] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 293.891188] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 293.891199] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 294.071114] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051)
[ 294.071123] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020)
[ 294.071132] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 2020)
[ 294.071147] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040)
[ 294.071157] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
[ 294.071218] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 294.071227] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 294.071261] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
[ 294.071270] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010)
[ 294.071279] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0)
[ 294.071293] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040)
[ 294.071304] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007)
[ 294.071362] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 294.071371] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 294.071405] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801)
[ 294.071414] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10)
[ 294.071423] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 1010)
[ 294.071437] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040)
[ 294.071448] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007)
[ 294.071505] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 294.071514] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 294.071526] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 294.071537] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 294.071604] usb usb1: root hub lost power or was reset
[ 294.071643] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 294.071654] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 294.071718] usb usb2: root hub lost power or was reset
[ 294.071741] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 294.071752] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 294.071815] usb usb3: root hub lost power or was reset
[ 294.071850] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 294.071860] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 294.071923] usb usb4: root hub lost power or was reset
[ 294.090252] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 294.090263] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 294.090351] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1)
[ 294.090359] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00)
[ 294.090368] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 228000f0)
[ 294.090386] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007)
[ 294.090417] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 294.090489] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b)
[ 294.090523] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005)
[ 294.090539] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 294.090548] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 294.110186] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b)
[ 294.110221] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)
[ 294.110248] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 294.110257] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 294.113653] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 294.113665] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 294.122529] [fglrx] firegl_gps_setpowerup .
[ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b)
[ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000)
[ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001)
[ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004)
[ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40)
[ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 100007)
[ 294.139817] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a)
[ 294.140015] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004)
[ 294.140025] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40)
[ 294.140037] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007)
[ 294.140085] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 294.140097] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 294.159906] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000)
[ 294.159916] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000)
[ 294.165525] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810)
[ 294.165537] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016)
[ 294.219086] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 294.223432] sd 2:0:1:0: [sda] Starting disk
[ 294.287129] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 294.287134] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out
[ 294.327031] ata1.00: configured for UDMA/66
[ 294.327959] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x6
[ 294.331099] ata1.00: XXX: REQUEST SENSE err_mask=0x0 ASC=0x29 ASCQ=0x0
[ 294.332026] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x2
[ 294.828112] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
[ 294.828118] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out
[ 294.944626] ata3.01: configured for UDMA/100
[ 294.961260] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 294.961260] sd 2:0:1:0: [sda] Write Protect is off
[ 294.961260] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 294.961260] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 295.809712] usb 1-2: reset full speed USB device using uhci_hcd and address 3
[ 295.980239] appletouch: Geyser mode initialized.
[ 296.117657] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 296.278619] applesmc: device has already been initialized (0xe0, 0x00).
[ 296.476854] usb 4-1: reset full speed USB device using uhci_hcd and address 3
[ 296.546579] Restarting tasks ... <6>usb 4-1: USB disconnect, address 3
[ 296.698188] done.
[ 296.754001] appletouch: incomplete data package (first byte: 2, length: 4).
[ 297.690974] usb 4-1: new full speed USB device using uhci_hcd and address 4
[ 297.909457] usb 4-1: configuration #1 chosen from 1 choice
[ 297.944435] input: HID 05ac:1000 as /class/input/input16
[ 297.993146] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 298.026199] input: HID 05ac:1000 as /class/input/input17
[ 298.030185] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 316.096198] end_request: I/O error, dev sr0, sector 84224
[ 316.096214] Buffer I/O error on device sr0, logical block 10528
[ 316.096709] Buffer I/O error on device sr0, logical block 10561
[ 316.096718] Buffer I/O error on device sr0, logical block 10562
[ 316.096726] Buffer I/O error on device sr0, logical block 10563
[ 316.096733] Buffer I/O error on device sr0, logical block 10564
[ 316.096740] Buffer I/O error on device sr0, logical block 10565
[ 316.096747] Buffer I/O error on device sr0, logical block 10566
[ 316.096754] Buffer I/O error on device sr0, logical block 10567
[ 316.096762] Buffer I/O error on device sr0, logical block 10568
[ 316.096769] Buffer I/O error on device sr0, logical block 10569
[ 491.250518] PM: Syncing filesystems ... done.
[ 492.145390] Freezing user space processes ... (elapsed 0.40 seconds) done.
[ 492.550510] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 492.550636] Suspending console(s)
[ 492.631929] sd 2:0:1:0: [sda] Synchronizing SCSI cache
[ 492.632156] sd 2:0:1:0: [sda] Stopping disk
[ 493.601818] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 493.618497] [fglrx] firegl_gps_setpowerdown .
[ 493.648899] ACPI: PCI interrupt for device 0000:01:00.0 disabled
[ 493.649095] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 493.669886] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 493.670069] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 493.689811] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 493.689861] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 493.689908] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 493.689956] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 493.710010] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 493.909790] ACPI: Preparing to enter system sleep state S3
[ 494.009904] Disabling non-boot CPUs ...
[ 494.009932] CPU0 attaching NULL sched-domain.
[ 494.009936] CPU1 attaching NULL sched-domain.
[ 494.137112] CPU 1 is now offline
[ 494.137116] SMP alternatives: switching to UP code
[ 494.159668] CPU0 attaching NULL sched-domain.
[ 494.159668] CPU1 is down
[ 494.159668] Extended CMOS year: 2000
[ 494.159668] Intel machine check architecture supported.
[ 494.159668] Intel machine check reporting enabled on CPU#0.
[ 494.159668] Back to C!
[ 494.159668] Extended CMOS year: 2000
[ 494.159668] Enabling non-boot CPUs ...
[ 494.159668] CPU0 attaching NULL sched-domain.
[ 494.159668] SMP alternatives: switching to SMP code
[ 494.169668] Booting processor 1/1 ip 6000
[ 494.175322] Initializing CPU#1
[ 494.315082] Calibrating delay using timer specific routine.. 4322.58 BogoMIPS (lpj=21612936)
[ 494.315082] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 494.315082] CPU: L2 cache: 4096K
[ 494.315082] CPU: Physical Processor ID: 0
[ 494.315082] CPU: Processor Core ID: 1
[ 494.315082] Intel machine check architecture supported.
[ 494.315082] Intel machine check reporting enabled on CPU#1.
[ 494.325708] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 494.325749] CPU0 attaching sched-domain:
[ 494.325751] domain 0: span 0-1
[ 494.325753] groups: 0 1
[ 494.325757] CPU1 attaching sched-domain:
[ 494.325759] domain 0: span 0-1
[ 494.325760] groups: 1 0
[ 494.315082] CPU1 is up
[ 494.473253] Switched to high resolution mode on CPU 1
[ 495.109895] __ratelimit: 24 messages suppressed
[ 495.109899] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b)
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0)
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001)
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030)
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 20003030)
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100)
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040)
[ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007)
[ 495.144098] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 495.144098] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 495.144098] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b)
[ 495.144098] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000)
[ 495.144098] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002)
[ 495.155992] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
[ 495.156551] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004)
[ 495.156560] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40)
[ 495.156571] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 495.156605] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 495.156617] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 495.336139] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051)
[ 495.336149] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020)
[ 495.336158] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 20002020)
[ 495.336173] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040)
[ 495.336183] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
[ 495.336252] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 495.336262] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 495.336297] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
[ 495.336306] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010)
[ 495.336314] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing f0)
[ 495.336329] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040)
[ 495.336339] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007)
[ 495.336397] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 495.336406] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 495.336440] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801)
[ 495.336449] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10)
[ 495.336458] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 20001010)
[ 495.336473] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040)
[ 495.336483] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007)
[ 495.336540] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 495.336549] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 495.336562] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 495.336573] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 495.336640] usb usb1: root hub lost power or was reset
[ 495.336679] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 495.336689] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 495.336753] usb usb2: root hub lost power or was reset
[ 495.336777] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 495.336788] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 495.336852] usb usb3: root hub lost power or was reset
[ 495.336886] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 495.336897] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 495.336961] usb usb4: root hub lost power or was reset
[ 495.355290] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 495.355303] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 495.355524] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1)
[ 495.355533] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00)
[ 495.355542] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 28000f0)
[ 495.355560] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007)
[ 495.355590] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 495.355663] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b)
[ 495.355696] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005)
[ 495.355713] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 495.355722] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 495.375348] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b)
[ 495.375382] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)
[ 495.375471] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 495.375481] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 495.378879] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 495.378890] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 495.387754] [fglrx] firegl_gps_setpowerup .
[ 495.393104] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b)
[ 495.393120] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000)
[ 495.393143] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001)
[ 495.393156] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004)
[ 495.393166] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40)
[ 495.393178] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 40100007)
[ 495.405364] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a)
[ 495.405401] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004)
[ 495.405411] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40)
[ 495.405424] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007)
[ 495.405472] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 495.405483] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 495.430947] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000)
[ 495.430958] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000)
[ 495.430968] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810)
[ 495.430979] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016)
[ 495.487042] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 495.490273] sd 2:0:1:0: [sda] Starting disk
[ 495.543941] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 495.543947] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out
[ 495.593807] ata1.00: configured for UDMA/66
[ 495.594734] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x6
[ 495.597912] ata1.00: XXX: REQUEST SENSE err_mask=0x0 ASC=0x29 ASCQ=0x0
[ 495.598808] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x2
[ 496.145683] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
[ 496.145690] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out
[ 496.243274] ata3.01: configured for UDMA/100
[ 496.264014] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 496.264014] sd 2:0:1:0: [sda] Write Protect is off
[ 496.264014] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 496.264014] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 497.183977] usb 1-2: reset full speed USB device using uhci_hcd and address 3
[ 497.354409] appletouch: Geyser mode initialized.
[ 497.491873] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 497.710597] applesmc: device has already been initialized (0xe0, 0x00).
[ 497.909789] usb 4-1: reset full speed USB device using uhci_hcd and address 4
[ 498.122210] Restarting tasks ... done.
[ 516.000954] end_request: I/O error, dev sr0, sector 2157768
[ 516.000971] Buffer I/O error on device sr0, logical block 269721
[ 516.004962] Buffer I/O error on device sr0, logical block 269753
[ 516.004971] Buffer I/O error on device sr0, logical block 269754
[ 516.004979] Buffer I/O error on device sr0, logical block 269755
[ 516.004986] Buffer I/O error on device sr0, logical block 269756
[ 516.004994] Buffer I/O error on device sr0, logical block 269757
[ 516.005001] Buffer I/O error on device sr0, logical block 269758
[ 516.005008] Buffer I/O error on device sr0, logical block 269759
[ 516.005016] Buffer I/O error on device sr0, logical block 269760
[ 516.005024] Buffer I/O error on device sr0, logical block 269761
[ 521.154739] __ratelimit: 20690 messages suppressed
[ 521.154751] Buffer I/O error on device sr0, logical block 280084
[ 526.169264] __ratelimit: 22104 messages suppressed
[ 526.169264] Buffer I/O error on device sr0, logical block 291137
[ 531.280360] __ratelimit: 21634 messages suppressed
[ 531.280360] Buffer I/O error on device sr0, logical block 301954
[ 536.437779] __ratelimit: 20655 messages suppressed
[ 536.437792] Buffer I/O error on device sr0, logical block 312282
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-06-12 6:15 ` Justin Mattock
@ 2008-06-12 6:26 ` Tejun Heo
2008-06-12 6:36 ` Justin Mattock
0 siblings, 1 reply; 18+ messages in thread
From: Tejun Heo @ 2008-06-12 6:26 UTC (permalink / raw)
To: Justin Mattock; +Cc: Andrew Morton, linux-kernel, linux-ide
Justin Mattock wrote:
> O.K. applied the patch and did what you have described,(except for
> sysctl -w / ended up inserting dev.scsi.logging_level=1 in
> /etc/sysctl.conf)
> This is what dd reported:(same as before)
> dd: reading `/dev/sr0':Input/output error
> 41+1 records in
> 41+1 records out
> 43122688 bytes (43 MB) copied, 41.0967 seconds, 1.0 MB/s
>
> Attached is dmesg of using dd on the first suspend, and playing a dvd
> on the second.
Ah.. okay. The drive was becoming ready and the read commands were
retried too fast. The drive I tested on was fast enough to deliver the
data but yours wasn't. Hmmm.... This is difficult. This also poses
problems to live cd distros, I think. We probably need to make sr wait
for device readiness. Maybe it's best to put TUR waiting in read error
handling. I'll think about it.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-06-12 6:26 ` Tejun Heo
@ 2008-06-12 6:36 ` Justin Mattock
2008-06-12 6:59 ` Tejun Heo
0 siblings, 1 reply; 18+ messages in thread
From: Justin Mattock @ 2008-06-12 6:36 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
On Thu, Jun 12, 2008 at 6:26 AM, Tejun Heo <htejun@gmail.com> wrote:
> Justin Mattock wrote:
>> O.K. applied the patch and did what you have described,(except for
>> sysctl -w / ended up inserting dev.scsi.logging_level=1 in
>> /etc/sysctl.conf)
>> This is what dd reported:(same as before)
>> dd: reading `/dev/sr0':Input/output error
>> 41+1 records in
>> 41+1 records out
>> 43122688 bytes (43 MB) copied, 41.0967 seconds, 1.0 MB/s
>>
>> Attached is dmesg of using dd on the first suspend, and playing a dvd
>> on the second.
>
> Ah.. okay. The drive was becoming ready and the read commands were
> retried too fast. The drive I tested on was fast enough to deliver the
> data but yours wasn't. Hmmm.... This is difficult. This also poses
> problems to live cd distros, I think. We probably need to make sr wait
> for device readiness. Maybe it's best to put TUR waiting in read error
> handling. I'll think about it.
>
> Thanks.
>
> --
> tejun
>
Yeah, take you're time. Maybe it's easier to have mplayer or which
ever media player wait for the drive. i.g.
under OSX, the media player pauses until the drive does it's thing,
and then resumes.(but this would be for the suspend aspect)
As for the live distro part I'd have to think as well. Let me know
what you think.
regards;
--
Justin P. Mattock
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-06-12 6:36 ` Justin Mattock
@ 2008-06-12 6:59 ` Tejun Heo
2008-06-12 7:45 ` Justin Mattock
0 siblings, 1 reply; 18+ messages in thread
From: Tejun Heo @ 2008-06-12 6:59 UTC (permalink / raw)
To: Justin Mattock; +Cc: Andrew Morton, linux-kernel, linux-ide
Justin Mattock wrote:
> Yeah, take you're time. Maybe it's easier to have mplayer or which
> ever media player wait for the drive. i.g.
> under OSX, the media player pauses until the drive does it's thing,
> and then resumes.(but this would be for the suspend aspect)
> As for the live distro part I'd have to think as well. Let me know
> what you think.
For apps which know they're accessing cd or dvd (probably using sg
commands), asking for TUR test after resume could be acceptable but apps
getting -EIO on read(2) because of intervening suspend/resume cycle is
just not right. The problem is that readiness waiting can take quite
some time and under the current architecture, that can make resume take
much longer or block IOs to other devices on the same port. :-(
--
tejun
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: macbook pro dvd playback after suspend Buffer I/O error
2008-06-12 6:59 ` Tejun Heo
@ 2008-06-12 7:45 ` Justin Mattock
0 siblings, 0 replies; 18+ messages in thread
From: Justin Mattock @ 2008-06-12 7:45 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
On Thu, Jun 12, 2008 at 6:59 AM, Tejun Heo <htejun@gmail.com> wrote:
> Justin Mattock wrote:
>> Yeah, take you're time. Maybe it's easier to have mplayer or which
>> ever media player wait for the drive. i.g.
>> under OSX, the media player pauses until the drive does it's thing,
>> and then resumes.(but this would be for the suspend aspect)
>> As for the live distro part I'd have to think as well. Let me know
>> what you think.
>
> For apps which know they're accessing cd or dvd (probably using sg
> commands), asking for TUR test after resume could be acceptable but apps
> getting -EIO on read(2) because of intervening suspend/resume cycle is
> just not right. The problem is that readiness waiting can take quite
> some time and under the current architecture, that can make resume take
> much longer or block IOs to other devices on the same port. :-(
>
> --
> tejun
>
>From what I could tell it's the whole start, think, move a little,
then start spinning, then slow down, then finally locate it's place,
that the drive
is doing that's causing the timing to be out of sync, with what's left
in the cache/or memory, I'm wondering if its possible to have the
disk not do the whole cycle that it does once suspend/resume is
activated, just to see.
regards;
--
Justin P. Mattock
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2008-06-12 7:46 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <dd18b0c30804032207u36bd1f43l358e9949f0c94f79@mail.gmail.com>
2008-04-04 8:21 ` macbook pro dvd playback after suspend Buffer I/O error Andrew Morton
2008-04-04 15:05 ` Justin Mattock
2008-06-11 2:00 ` Tejun Heo
2008-06-11 7:45 ` Justin Mattock
2008-06-11 18:31 ` Justin Mattock
2008-06-11 21:51 ` Tejun Heo
2008-06-11 22:27 ` Justin Mattock
2008-06-12 1:18 ` Tejun Heo
2008-06-12 2:10 ` Justin Mattock
2008-06-12 2:13 ` Justin Mattock
2008-06-12 4:15 ` Tejun Heo
2008-06-12 5:22 ` Justin Mattock
2008-06-12 6:15 ` Justin Mattock
2008-06-12 6:26 ` Tejun Heo
2008-06-12 6:36 ` Justin Mattock
2008-06-12 6:59 ` Tejun Heo
2008-06-12 7:45 ` Justin Mattock
2008-04-04 19:02 Justin Mattock
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).