From: Alek Du <alek.du@intel.com>
To: linux-ide@vger.kernel.org, jgarzik@pobox.com
Subject: [PATCH] ata: Add Intel SCH PATA support
Date: Sat, 26 Apr 2008 14:00:07 +0800 [thread overview]
Message-ID: <20080426140007.63cfeede@dxy.sh.intel.com> (raw)
Seems I need to post the patch here instead of LKML
[PATCH] ata: Add Intel SCH PATA support
This patch adds Intel SCH chipsets (US15W, US15L, UL11L) PATA controller
support.
Signed-off-by: Alek Du <alek.du@intel.com>
---
include/linux/pci_ids.h | 2 ++
drivers/ata/ata_piix.c | 40 ++++++++++++++++++++++++++++++++++++++--
drivers/ide/pci/piix.c | 2 ++
3 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 70eb3c8..b72b3b4 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2413,6 +2413,8 @@
#define PCI_DEVICE_ID_INTEL_82443GX_0 0x71a0
#define PCI_DEVICE_ID_INTEL_82443GX_2 0x71a2
#define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601
+#define PCI_DEVICE_ID_INTEL_SCH_LPC 0x8119
+#define PCI_DEVICE_ID_INTEL_SCH_IDE 0x811a
#define PCI_DEVICE_ID_INTEL_82454GX 0x84c4
#define PCI_DEVICE_ID_INTEL_82450GX 0x84c5
#define PCI_DEVICE_ID_INTEL_82451NX 0x84ca
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index b7c38ee..7f95a9a 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -214,6 +214,8 @@ static const struct pci_device_id piix_pci_tbl[] = {
/* ICH7/7-R (i945, i975) UDMA 100*/
{ 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
{ 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
+ /* INTEL SCH UDMA 100 */
+ { 0x8086, 0x811A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
/* ICH8 Mobile PATA Controller */
{ 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
@@ -561,6 +563,10 @@ struct ich_laptop {
u16 subdevice;
};
+struct sch_80 {
+ u16 device;
+};
+
/*
* List of laptops that use short cables rather than 80 wire
*/
@@ -577,6 +583,17 @@ static const struct ich_laptop ich_laptop[] = {
{ 0, }
};
+/*
+ * List of chipsets whose port IOCFG and enable bit registers are reserved
+ */
+
+static const struct sch_80 sch_80[] = {
+ /* devid */
+ { 0x811A }, /* Intel SCH chipset */
+ /* end marker */
+ { 0, }
+};
+
/**
* ich_pata_cable_detect - Probe host controller cable detect info
* @ap: Port for which cable detect info is desired
@@ -592,6 +609,7 @@ static int ich_pata_cable_detect(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
const struct ich_laptop *lap = &ich_laptop[0];
+ const struct sch_80 *sch = &sch_80[0];
u8 tmp, mask;
/* Check for specials - Acer Aspire 5602WLMi */
@@ -604,6 +622,13 @@ static int ich_pata_cable_detect(struct ata_port *ap)
lap++;
}
+ /* Check for specials - Intel SCH chipset */
+ while (sch->device) {
+ if (sch->device == pdev->device)
+ return ATA_CBL_PATA80;
+ sch++;
+ }
+
/* check BIOS cable detect results */
mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
pci_read_config_byte(pdev, PIIX_IOCFG, &tmp);
@@ -624,9 +649,20 @@ static int piix_pata_prereset(struct ata_link *link, unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ const struct sch_80 *sch = &sch_80[0];
+ int skip_check = 0;
- if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
- return -ENOENT;
+ /* Check for specials - Intel SCH chipset */
+ while (sch->device) {
+ if (sch->device == pdev->device) {
+ skip_check = 1;
+ break;
+ }
+ sch++;
+ }
+ if (!skip_check)
+ if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
+ return -ENOENT;
return ata_sff_prereset(link, deadline);
}
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index decef0f..dce830b 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -377,6 +377,7 @@ static const struct ide_port_info piix_pci_info[] __devinitdata = {
/* 22 */ DECLARE_ICH_DEV("ICH4", ATA_UDMA5),
/* 23 */ DECLARE_ICH_DEV("ESB2", ATA_UDMA5),
/* 24 */ DECLARE_ICH_DEV("ICH8M", ATA_UDMA5),
+ /* 25 */ DECLARE_ICH_DEV("SCH", ATA_UDMA5),
};
/**
@@ -450,6 +451,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1), 22 },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 23 },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6), 24 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_IDE), 25 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
--
1.5.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2008-04-26 6:06 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-26 6:00 Alek Du [this message]
2008-04-26 9:30 ` [PATCH] ata: Add Intel SCH PATA support Alan Cox
2008-04-26 23:51 ` Alek Du
2008-04-27 8:34 ` Alan Cox
2008-04-27 14:03 ` Alek Du
2008-04-27 14:31 ` Alan Cox
2008-04-28 1:20 ` Alek Du
2008-04-28 9:16 ` Alan Cox
2008-04-29 17:22 ` Sergei Shtylyov
2008-04-28 4:05 ` [PATCH] ata: Add Intel SCH PATA support (revised) Alek Du
2008-04-28 8:41 ` Alan Cox
2008-04-28 9:07 ` Alek Du
2008-04-28 9:21 ` Alan Cox
2008-04-28 19:01 ` Bartlomiej Zolnierkiewicz
2008-04-29 0:14 ` Alek Du
2008-04-29 3:41 ` Alek Du
2008-04-29 3:39 ` Alek Du
2008-04-29 16:38 ` Sergei Shtylyov
2008-04-30 2:49 ` Alek Du
2008-04-30 11:17 ` Sergei Shtylyov
2008-04-26 16:46 ` [PATCH] ata: Add Intel SCH PATA support Sergei Shtylyov
2008-04-26 23:32 ` Alek Du
2008-04-26 23:50 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080426140007.63cfeede@dxy.sh.intel.com \
--to=alek.du@intel.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).