[PATCH 14/21] cy82c693: convert to use ide_timing_find_mode()

[Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>]

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/Kconfig        |    1 +
 drivers/ide/pci/cy82c693.c |    9 ++++-----
 2 files changed, 5 insertions(+), 5 deletions(-)

Index: b/drivers/ide/Kconfig
===================================================================
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -510,6 +510,7 @@ config BLK_DEV_TRIFLEX
 
 config BLK_DEV_CY82C693
 	tristate "CY82C693 chipset support"
+	select IDE_TIMINGS
 	select BLK_DEV_IDEDMA_PCI
 	help
 	  This driver adds detection and support for the CY82C693 chipset
Index: b/drivers/ide/pci/cy82c693.c
===================================================================
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -133,6 +133,7 @@ static int calc_clk(int time, int bus_sp
  */
 static void compute_clocks(u8 pio, pio_clocks_t *p_pclk)
 {
+	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
 	int clk1, clk2;
 	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
 
@@ -141,15 +142,13 @@ static void compute_clocks(u8 pio, pio_c
 	 */
 
 	/* let's calc the address setup time clocks */
-	p_pclk->address_time = (u8)calc_clk(ide_pio_timings[pio].setup_time, bus_speed);
+	p_pclk->address_time = (u8)calc_clk(t->setup, bus_speed);
 
 	/* let's calc the active and recovery time clocks */
-	clk1 = calc_clk(ide_pio_timings[pio].active_time, bus_speed);
+	clk1 = calc_clk(t->active, bus_speed);
 
 	/* calc recovery timing */
-	clk2 =	ide_pio_timings[pio].cycle_time -
-		ide_pio_timings[pio].active_time -
-		ide_pio_timings[pio].setup_time;
+	clk2 = t->cycle - t->active - t->setup;
 
 	clk2 = calc_clk(clk2, bus_speed);