linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ralf Baechle <ralf@linux-mips.org>
To: bzolnier@gmail.com, linux-ide@vger.kernel.org
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>, linux-mips@linux-mips.org
Subject: [PATCH] IDE: Fix platform device registration in Swarm IDE driver
Date: Mon, 22 Sep 2008 14:29:08 +0200	[thread overview]
Message-ID: <20080922122853.GA15210@linux-mips.org> (raw)

The Swarm IDE driver uses a release method which is defined in the driver
itself thus potencially oopsable.  The simpel fix would be to just leak
the device but this patch goes the full length and moves the entire
handling of the platform device in the platform code and retains only
the platform driver code in drivers/ide/mips/swarm.c.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

This patch is for 2.6.27.  The same issue exists in -stable but the patch
won't apply due to other driver changes.

 arch/mips/sibyte/swarm/Makefile   |    3 
 arch/mips/sibyte/swarm/platform.c |   60 ++++++++++++++++
 drivers/ide/mips/swarm.c          |  140 +++++++++++---------------------------
 3 files changed, 104 insertions(+), 99 deletions(-)

Index: linux-mips/arch/mips/sibyte/swarm/platform.c
===================================================================
--- /dev/null
+++ linux-mips/arch/mips/sibyte/swarm/platform.c
@@ -0,0 +1,60 @@
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/sibyte/board.h>
+#include <asm/sibyte/sb1250_genbus.h>
+#include <asm/sibyte/sb1250_regs.h>
+
+#define DEV_NAME "ide-swarm"
+
+static struct resource swarm_ide_resource[] = {
+	{
+		.name	= "Swarm GenBus IDE",
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Swarm GenBus IDE",
+		.flags	= IORESOURCE_IRQ,
+		.start	= K_INT_GB_IDE,
+		.end	= K_INT_GB_IDE,
+	},
+};
+
+static int __init swarm_ide_init(void)
+{
+	struct platform_device *pdev;
+	u8 __iomem *base;
+	phys_t offset, size;
+
+	if (!SIBYTE_HAVE_IDE)
+		return -ENODEV;
+
+	base = ioremap(A_IO_EXT_BASE, 0x800);
+	offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
+	size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
+	iounmap(base);
+
+	offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
+	size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
+	if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
+		pr_info(DEV_NAME ": IDE interface at GenBus disabled\n");
+
+		return -EBUSY;
+	}
+
+	pr_info(DEV_NAME ": IDE interface at GenBus slot %i\n", IDE_CS);
+
+	swarm_ide_resource[0].start = offset;
+	swarm_ide_resource[0].end = offset + size - 1;
+
+	pdev = platform_device_register_simple(DEV_NAME, -1,
+		       swarm_ide_resource, ARRAY_SIZE(swarm_ide_resource));
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
+}
+
+device_initcall(swarm_ide_init);
Index: linux-mips/arch/mips/sibyte/swarm/Makefile
===================================================================
--- linux-mips.orig/arch/mips/sibyte/swarm/Makefile
+++ linux-mips/arch/mips/sibyte/swarm/Makefile
@@ -1,3 +1,4 @@
-obj-y				:= setup.o rtc_xicor1241.o rtc_m41t81.o
+obj-y				:= platform.o setup.o rtc_xicor1241.o \
+				   rtc_m41t81.o
 
 obj-$(CONFIG_I2C_BOARDINFO)	+= swarm-i2c.o
Index: linux-mips/drivers/ide/mips/swarm.c
===================================================================
--- linux-mips.orig/drivers/ide/mips/swarm.c
+++ linux-mips/drivers/ide/mips/swarm.c
@@ -46,21 +46,10 @@
 
 #include <asm/io.h>
 
-#include <asm/sibyte/board.h>
-#include <asm/sibyte/sb1250_genbus.h>
-#include <asm/sibyte/sb1250_regs.h>
-
 #define DRV_NAME "ide-swarm"
 
 static char swarm_ide_string[] = DRV_NAME;
 
-static struct resource swarm_ide_resource = {
-	.name	= "SWARM GenBus IDE",
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device *swarm_ide_dev;
-
 static const struct ide_port_info swarm_port_info = {
 	.name			= DRV_NAME,
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
@@ -70,41 +59,18 @@ static const struct ide_port_info swarm_
  * swarm_ide_probe - if the board header indicates the existence of
  * Generic Bus IDE, allocate a HWIF for it.
  */
-static int __devinit swarm_ide_probe(struct device *dev)
+static int __devinit swarm_ide_probe(struct platform_device *pdev)
 {
 	u8 __iomem *base;
 	struct ide_host *host;
 	phys_t offset, size;
+	struct resource *r;
 	int i, rc;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
-	if (!SIBYTE_HAVE_IDE)
-		return -ENODEV;
-
-	base = ioremap(A_IO_EXT_BASE, 0x800);
-	offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
-	size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
-	iounmap(base);
-
-	offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
-	size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
-	if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
-		printk(KERN_INFO DRV_NAME
-		       ": IDE interface at GenBus disabled\n");
-		return -EBUSY;
-	}
-
-	printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n",
-	       IDE_CS);
-
-	swarm_ide_resource.start = offset;
-	swarm_ide_resource.end = offset + size - 1;
-	if (request_resource(&iomem_resource, &swarm_ide_resource)) {
-		printk(KERN_ERR DRV_NAME
-		       ": can't request I/O memory resource\n");
-		return -EBUSY;
-	}
-
+	r = pdev->resource;
+	offset = r->start;
+	size = resource_size(r);
 	base = ioremap(offset, size);
 
 	memset(&hw, 0, sizeof(hw));
@@ -113,85 +79,63 @@ static int __devinit swarm_ide_probe(str
 				(unsigned long)(base + ((0x1f0 + i) << 5));
 	hw.io_ports.ctl_addr =
 				(unsigned long)(base + (0x3f6 << 5));
-	hw.irq = K_INT_GB_IDE;
+	hw.irq = r[1].start;
 	hw.chipset = ide_generic;
 
 	rc = ide_host_add(&swarm_port_info, hws, &host);
-	if (rc)
-		goto err;
+	if (rc) {
+		iounmap(base);
+
+		return rc;
+	}
 
-	dev_set_drvdata(dev, host);
+	platform_set_drvdata(pdev, host);
 
 	return 0;
-err:
-	release_resource(&swarm_ide_resource);
-	iounmap(base);
-	return rc;
 }
 
-static struct device_driver swarm_ide_driver = {
-	.name	= swarm_ide_string,
-	.bus	= &platform_bus_type,
-	.probe	= swarm_ide_probe,
-};
-
-static void swarm_ide_platform_release(struct device *device)
+static int __devexit swarm_ide_remove(struct platform_device *pdev)
 {
-	struct platform_device *pldev;
+	struct ide_host *host = pdev->dev.driver_data;
 
-	/* free device */
-	pldev = to_platform_device(device);
-	kfree(pldev);
+	ide_host_remove(host);
+
+	return 0;
 }
 
-static int __devinit swarm_ide_init_module(void)
+static struct platform_driver swarm_ide_driver = {
+	.driver = {
+		.name	= swarm_ide_string,
+		.owner	= THIS_MODULE,
+	},
+	.probe	= swarm_ide_probe,
+	.remove = __devexit_p(swarm_ide_remove),
+};
+
+static int __init swarm_ide_init(void)
 {
-	struct platform_device *pldev;
 	int err;
 
-	printk(KERN_INFO "SWARM IDE driver\n");
-
-	if (driver_register(&swarm_ide_driver)) {
-		printk(KERN_ERR "Driver registration failed\n");
-		err = -ENODEV;
-		goto out;
-	}
+	pr_info("Swarm IDE driver\n");
 
-        if (!(pldev = kzalloc(sizeof (*pldev), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto out_unregister_driver;
-	}
+	err = platform_driver_register(&swarm_ide_driver);
+	if (err) {
+		pr_err("Driver registration failed\n");
 
-	pldev->name		= swarm_ide_string;
-	pldev->id		= 0;
-	pldev->dev.release	= swarm_ide_platform_release;
-
-	if (platform_device_register(pldev)) {
-		err = -ENODEV;
-		goto out_free_pldev;
+		return err;
 	}
 
-        if (!pldev->dev.driver) {
-		/*
-		 * The driver was not bound to this device, there was
-                 * no hardware at this address. Unregister it, as the
-		 * release fuction will take care of freeing the
-		 * allocated structure
-		 */
-		platform_device_unregister (pldev);
-	}
-
-	swarm_ide_dev = pldev;
-
 	return 0;
+}
 
-out_free_pldev:
-	kfree(pldev);
-
-out_unregister_driver:
-	driver_unregister(&swarm_ide_driver);
-out:
-	return err;
+static void __exit swarm_ide_exit(void)
+{
+	platform_driver_unregister(&swarm_ide_driver);
 }
 
-module_init(swarm_ide_init_module);
+MODULE_DESCRIPTION("Sibyte Swarm platform IDE driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ide-swarm");
+
+module_init(swarm_ide_init);
+module_exit(swarm_ide_exit);

             reply	other threads:[~2008-09-22 12:37 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-09-22 12:29 Ralf Baechle [this message]
2008-09-24 11:08 ` [PATCH] IDE: Fix platform device registration in Swarm IDE driver Sergei Shtylyov
2008-09-24 13:52   ` Maciej W. Rozycki
2008-09-27 23:51     ` Ralf Baechle
2008-09-27 16:59   ` Bartlomiej Zolnierkiewicz
2008-09-28  9:22     ` Sergei Shtylyov
2008-09-28 11:39     ` Ralf Baechle
2008-09-28 13:12       ` Sergei Shtylyov
2008-09-28 17:54       ` [PATCH v2] " Ralf Baechle
2008-09-28 21:51         ` Sergei Shtylyov
2008-09-28 21:57           ` Ralf Baechle
2008-09-29  8:00           ` Sergei Shtylyov
2008-10-03 17:00           ` Bartlomiej Zolnierkiewicz
2008-10-03 18:25             ` Ralf Baechle
2008-09-28 11:47   ` [PATCH] " Ralf Baechle
2008-09-28 12:51     ` Sergei Shtylyov
2008-09-28 17:18       ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080922122853.GA15210@linux-mips.org \
    --to=ralf@linux-mips.org \
    --cc=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=macro@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).