linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA

linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
       [not found] <20081024171932.1e8131d0.sfr@canb.auug.org.au>
@ 2008-10-24 11:38 ` Kamalesh Babulal
  2008-10-24 12:15   ` Sergei Shtylyov
  0 siblings, 1 reply; 12+ messages in thread
From: Kamalesh Babulal @ 2008-10-24 11:38 UTC (permalink / raw)
  To: Stephen Rothwell; +Cc: linux-next, LKML, linux-ide, bzolnier

Hi Stephen,

 next-20081024 randconfig build fails on the powerpc, with

drivers/ide/pmac.c: In function 'pmac_ide_set_pio_mode':
drivers/ide/pmac.c:527: error: implicit declaration of function 'kauai_lookup_timing'
drivers/ide/pmac.c:527: error: 'shasta_pio_timings' undeclared (first use in this function)
drivers/ide/pmac.c:527: error: (Each undeclared identifier is reported only once
drivers/ide/pmac.c:527: error: for each function it appears in.)
drivers/ide/pmac.c:534: error: 'kauai_pio_timings' undeclared (first use in this function)
drivers/ide/pmac.c: In function 'pmac_ide_do_resume':
drivers/ide/pmac.c:914: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
drivers/ide/pmac.c: At top level:
drivers/ide/pmac.c:1007: error: 'pmac_ide_init_dma' undeclared here (not in a function)
drivers/ide/pmac.c: In function 'pmac_ide_setup_device':
drivers/ide/pmac.c:1107: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
drivers/ide/pmac.c: In function 'pmac_ide_macio_attach':
drivers/ide/pmac.c:1209: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
drivers/ide/pmac.c:1210: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
make[2]: *** [drivers/ide/pmac.o] Error 1

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27-next-20081024
# Fri Oct 24 06:53:29 2008
#
CONFIG_PPC64=y

#
# Processor support
#
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_MM_SLICES=y
# CONFIG_VIRT_CPU_ACCOUNTING is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_HIBERNATE_64=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
CONFIG_PPC_DCR_MMIO=y
CONFIG_PPC_DCR=y
CONFIG_PPC_OF_PLATFORM_PCI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_MARKERS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=m
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set

#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_PPC_PSERIES=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
# CONFIG_LPARCFG is not set
# CONFIG_PPC_PSERIES_DEBUG is not set
# CONFIG_PPC_SMLPAR is not set
# CONFIG_PPC_ISERIES is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
CONFIG_PPC_PASEMI=y

#
# PA Semi PWRficient options
#
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
# CONFIG_PPC_PASEMI_MDIO is not set
CONFIG_PPC_PS3=y

#
# PS3 Platform Options
#
# CONFIG_PS3_ADVANCED is not set
CONFIG_PS3_HTAB_SIZE=20
CONFIG_PS3_DYNAMIC_DMA=y
CONFIG_PS3_VUART=y
CONFIG_PS3_PS3AV=y
CONFIG_PS3_SYS_MANAGER=y
CONFIG_PS3_STORAGE=m
CONFIG_PS3_DISK=m
CONFIG_PS3_ROM=m
CONFIG_PS3_FLASH=m
# CONFIG_PS3_LPM is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
# CONFIG_PPC_CELLEB is not set

#
# Cell Broadband Engine options
#
CONFIG_SPU_FS=y
CONFIG_SPU_TRACE=m
CONFIG_SPU_BASE=y
# CONFIG_CBE_RAS is not set
# CONFIG_PPC_IBM_CELL_POWERBUTTON is not set
CONFIG_CBE_CPUFREQ_SPU_GOVERNOR=m
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_XICS=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
CONFIG_U3_DART=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
# CONFIG_RTAS_PROC is not set
CONFIG_PPC_PMI=m
CONFIG_MMIO_NVRAM=y
CONFIG_MPIC_U3_HT_IRQS=y
CONFIG_MPIC_BROKEN_REGREAD=y
CONFIG_IBMVIO=y
# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
CONFIG_PPC_INDIRECT_IO=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPU Frequency drivers
#
CONFIG_CPU_FREQ_PMAC64=y
# CONFIG_PPC_PASEMI_CPUFREQ is not set
# CONFIG_AXON_RAM is not set
# CONFIG_FSL_ULI1575 is not set

#
# Kernel options
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_CPUMASK_OFFSTACK=y
# CONFIG_BINFMT_ELF is not set
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
CONFIG_PHYP_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_64K_PAGES=y
CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_PPC_SUBPAGE_PROT=y
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,9600 console=tty0 root=/dev/sda2"
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_VERBOSE=y
# CONFIG_HIBERNATION is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y

#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
CONFIG_PCCARD=m
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
CONFIG_I82092=m
# CONFIG_ELECTRA_CF is not set
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_SHPC=y
# CONFIG_HOTPLUG_PCI_RPA is not set
# CONFIG_HAS_RAPIDIO is not set
# CONFIG_RELOCATABLE is not set
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_UNIX is not set
CONFIG_XFRM=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_GARP=m
# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_INGRESS is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=y
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not set
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
# CONFIG_NET_EMATCH_META is not set
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
# CONFIG_NET_ACT_GACT is not set
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
# CONFIG_BT_RFCOMM is not set
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_PHONET=y
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
CONFIG_WIRELESS_EXT=y
CONFIG_IEEE80211=y
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=m
CONFIG_NET_9P=y
CONFIG_NET_9P_DEBUG=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_AR7_PARTS=y

#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=y
# CONFIG_SSFDC is not set
CONFIG_MTD_OOPS=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=m
# CONFIG_MTD_PCI is not set
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=m

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
CONFIG_MTD_PMC551_DEBUG=y
# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_PHRAM=y
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_PASEMI=m
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_NAND_FSL_ELBC=m
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m

#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=m
CONFIG_OF_SPI=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_BLK_DEV_HD=y
# CONFIG_MISC_DEVICES is not set
CONFIG_TIFM_CORE=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_BLK_DEV_IDE_SATA=y
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=y
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
CONFIG_BLK_DEV_SC1200=y
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT8213=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=m
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SL82C105=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=m
CONFIG_BLK_DEV_TC86C001=y
CONFIG_BLK_DEV_IDE_PMAC=m
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
# CONFIG_BLK_DEV_IDEDMA_PMAC is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=m
# CONFIG_SCSI_SRP_TGT_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_3W_9XXX is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_IBMVSCSI=m
CONFIG_SCSI_IBMVFC=m
CONFIG_SCSI_IBMVFC_TRACE=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_MMIO is not set
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
# CONFIG_FIREWIRE_SBP2 is not set
# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
# CONFIG_I2O_PROC is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
CONFIG_DUMMY=y
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=y
CONFIG_VETH=y
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=m
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_OF_GPIO=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
# CONFIG_NET_TULIP is not set
CONFIG_HP100=m
CONFIG_IBMVETH=y
CONFIG_IBM_NEW_EMAC=y
CONFIG_IBM_NEW_EMAC_RXB=128
CONFIG_IBM_NEW_EMAC_TXB=64
CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
CONFIG_IBM_NEW_EMAC_DEBUG=y
CONFIG_IBM_NEW_EMAC_ZMII=y
CONFIG_IBM_NEW_EMAC_RGMII=y
CONFIG_IBM_NEW_EMAC_TAH=y
CONFIG_IBM_NEW_EMAC_EMAC4=y
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_FORCEDETH is not set
CONFIG_EEPRO100=y
CONFIG_E100=m
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=m
CONFIG_8139CP=y
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not set
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R6040=y
CONFIG_SIS900=y
CONFIG_EPIC100=m
CONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_SC92031 is not set
CONFIG_ATL2=m
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
CONFIG_DL2K=y
# CONFIG_E1000 is not set
CONFIG_E1000E=m
# CONFIG_IP1000 is not set
CONFIG_IGB=m
CONFIG_NS83820=m
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_SPIDER_NET=m
CONFIG_GELIC_NET=y
CONFIG_GELIC_WIRELESS=y
CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_JME=y
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
CONFIG_NETXEN_NIC=y
CONFIG_NIU=m
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
CONFIG_TEHUTI=y
CONFIG_BNX2X=m
CONFIG_QLGE=m
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=y
CONFIG_TMS380TR=m
# CONFIG_TMSPCI is not set
# CONFIG_ABYSS is not set

#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_PCMCIA_WAVELAN=m
# CONFIG_PCMCIA_NETWAVE is not set
CONFIG_WLAN_80211=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_IPW2100=y
# CONFIG_IPW2100_MONITOR is not set
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=y
# CONFIG_IPW2200_MONITOR is not set
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=y
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_DEBUG=y
# CONFIG_AIRO is not set
CONFIG_HERMES=y
CONFIG_APPLE_AIRPORT=y
CONFIG_PLX_HERMES=y
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
# CONFIG_PCMCIA_HERMES is not set
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
# CONFIG_AIRO_CS is not set
CONFIG_PCMCIA_WL3501=m
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC95XX=m
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
# CONFIG_USB_ALI_M5632 is not set
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
# CONFIG_USB_KC2190 is not set
# CONFIG_USB_NET_ZAURUS is not set
CONFIG_USB_HSO=y
# CONFIG_NET_PCMCIA is not set
CONFIG_WAN=y
# CONFIG_HDLC is not set
# CONFIG_DLCI is not set
# CONFIG_WAN_ROUTER_DRIVERS is not set
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=y
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
CONFIG_SLHC=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_ISDN=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
# CONFIG_MISDN_L1OIP is not set

#
# mISDN hardware drivers
#
# CONFIG_MISDN_HFCPCI is not set
CONFIG_MISDN_HFCMULTI=m
CONFIG_ISDN_I4L=y
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
# CONFIG_ISDN_X25 is not set

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=y

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
# CONFIG_HISAX_NO_LLC is not set
CONFIG_HISAX_NO_KEYPAD=y
# CONFIG_HISAX_1TR6 is not set
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
# CONFIG_HISAX_S0BOX is not set
CONFIG_HISAX_AVM_A1_PCMCIA=y
# CONFIG_HISAX_ELSA is not set
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
# CONFIG_HISAX_SCT_QUADRO is not set
# CONFIG_HISAX_GAZEL is not set
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_DEBUG=y

#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_AVM_A1_CS=m
# CONFIG_HISAX_TELES_CS is not set

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
# CONFIG_HISAX_FRITZ_PCIPNP is not set
CONFIG_HISAX_HDLC=y

#
# Active cards
#
CONFIG_HYSDN=m
# CONFIG_HYSDN_CAPI is not set
# CONFIG_ISDN_DRV_GIGASET is not set
CONFIG_ISDN_CAPI=y
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
CONFIG_CAPI_TRACE=y
# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
# CONFIG_ISDN_CAPI_CAPI20 is not set
# CONFIG_ISDN_CAPI_CAPIDRV is not set

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
# CONFIG_ISDN_DRV_AVMB1_B1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not set
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
# CONFIG_ISDN_DIVAS_BRIPCI is not set
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_PHONE=m
# CONFIG_PHONE_IXJ is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=m
# CONFIG_SERIAL_PMACZILOG_TTYS is not set
# CONFIG_SERIAL_ICOM is not set
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_CONSOLE is not set
CONFIG_HVC_RTAS=y
# CONFIG_HVCS is not set
CONFIG_IBM_BSR=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_PASEMI=m
CONFIG_R3964=y
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# Mac SMBus host controller drivers
#
CONFIG_I2C_POWERMAC=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m
CONFIG_I2C_OCORES=m
# CONFIG_I2C_PASEMI is not set
CONFIG_I2C_SIMTEC=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m

#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=m
# CONFIG_AT24 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8591=m
CONFIG_TPS65010=m
# CONFIG_SENSORS_MAX6875 is not set
CONFIG_SENSORS_TSL2550=m
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m

#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=y
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=m

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
# CONFIG_GPIO_MCP23S08 is not set
CONFIG_W1=m
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=m
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_WATCHDOG_RTAS=y

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_WM8400=m
CONFIG_MFD_WM8350=m
CONFIG_MFD_WM8350_I2C=m

#
# Voltage and Current regulators
#
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_BQ24022=m
CONFIG_REGULATOR_WM8350=m
CONFIG_REGULATOR_WM8400=m

#
# Multimedia devices
#

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_VIDEO_MEDIA is not set

#
# Multimedia drivers
#
CONFIG_DAB=y
CONFIG_USB_DABUSB=y

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_VIA=m
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
CONFIG_FB_MACMODES=m
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
# CONFIG_FB_SAVAGE_I2C is not set
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
# CONFIG_FB_SIS_300 is not set
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=m
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_IBM_GXT4500=m
CONFIG_FB_PS3=m
CONFIG_FB_PS3_DEFAULT_SIZE_M=9
CONFIG_FB_VIRTUAL=m
CONFIG_FB_METRONOME=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI9320=m
# CONFIG_LCD_TDO24M is not set
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CORGI=m

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_7x14=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
# CONFIG_FONT_MINI_4x6 is not set
CONFIG_FONT_SUN8x16=y
# CONFIG_FONT_SUN12x22 is not set
CONFIG_FONT_10x18=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
# CONFIG_SND_AU8830 is not set
CONFIG_SND_AW2=m
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
CONFIG_SND_BT87X_OVERCLOCK=y
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
# CONFIG_SND_CS46XX_NEW_DSP is not set
CONFIG_SND_CS5530=m
# CONFIG_SND_DARLA20 is not set
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
# CONFIG_SND_DARLA24 is not set
CONFIG_SND_GINA24=m
# CONFIG_SND_LAYLA24 is not set
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
# CONFIG_SND_EMU10K1 is not set
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
# CONFIG_SND_ENS1371 is not set
CONFIG_SND_ES1938=m
# CONFIG_SND_ES1968 is not set
CONFIG_SND_FM801=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
CONFIG_SND_HDA_CODEC_SIGMATEL=y
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
# CONFIG_SND_HDA_CODEC_NVHDMI is not set
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
# CONFIG_SND_HDA_CODEC_SI3054 is not set
# CONFIG_SND_HDA_GENERIC is not set
# CONFIG_SND_HDA_POWER_SAVE is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_HIFIER=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
# CONFIG_SND_INTEL8X0 is not set
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not set
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
# CONFIG_SND_PPC is not set
# CONFIG_SND_AOA is not set
# CONFIG_SND_SPI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_ALL_CODECS=m
CONFIG_SND_SOC_AD73311=m
CONFIG_SND_SOC_AK4535=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC26=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_UDA1380=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8900=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8971=m
CONFIG_SND_SOC_WM8990=m
CONFIG_SOUND_PRIME=m
CONFIG_AC97_BUS=m
# CONFIG_HID_SUPPORT is not set
CONFIG_HID=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_ISP1760_PCI=y
CONFIG_USB_ISP1760_OF=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_WHCI_HCD=y
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=m

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=y
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_FUNSOFT=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_GARMIN=y
# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_IUU=m
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KLSI=m
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_MOS7720=y
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=y
CONFIG_USB_SERIAL_SAFE=y
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
# CONFIG_USB_SERIAL_CYBERJACK is not set
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
CONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=m
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_PHIDGET=y
CONFIG_USB_PHIDGETKIT=y
# CONFIG_USB_PHIDGETMOTORCONTROL is not set
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_VST=y
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=m
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_FILE_STORAGE_TEST=y
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_UWB=y
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=y
CONFIG_UWB_WLP=m
# CONFIG_UWB_I1480U is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
# CONFIG_MEMSTICK_JMICRON_38X is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_PCA955X=m

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_PASEMI=m
# CONFIG_EDAC_CELL is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=m
# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_MAX6902=m
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_DS3234=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_PPC is not set
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_SMX=m
CONFIG_UIO_SERCOS3=m
CONFIG_STAGING=y
CONFIG_ET131X=m
CONFIG_ET131X_DEBUG=y
CONFIG_ME4000=m
# CONFIG_USB_IP_COMMON is not set
CONFIG_PRISM2_USB=m
CONFIG_ECHO=y
CONFIG_USB_ATMEL=y
CONFIG_POCH=m

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4DEV_COMPAT=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=y
CONFIG_OCFS2_FS=y
# CONFIG_OCFS2_FS_O2CB is not set
# CONFIG_OCFS2_FS_STATS is not set
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_OCFS2_COMPAT_JBD=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QFMT_V1=y
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
# CONFIG_JFFS2_RTIME is not set
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=y
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=m

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_HAVE_LMB=y

#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_PRINTK_DEBUG=y
CONFIG_SAMPLES=y
CONFIG_SAMPLE_MARKERS=m
CONFIG_SAMPLE_KOBJECT=y
CONFIG_SAMPLE_KPROBES=m
CONFIG_SAMPLE_KRETPROBES=m
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KERNEL_TESTS=y
# CONFIG_IRQSTACKS is not set
CONFIG_BOOTX_TEXT=y
CONFIG_PPC_EARLY_DEBUG=y
CONFIG_PPC_EARLY_DEBUG_LPAR=y
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
CONFIG_CRYPTO_XCBC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_TGR192=m
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
-- 
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  2008-10-24 11:38 ` linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC Kamalesh Babulal
@ 2008-10-24 12:15   ` Sergei Shtylyov
  2008-10-24 22:07     ` Benjamin Herrenschmidt
  0 siblings, 1 reply; 12+ messages in thread
From: Sergei Shtylyov @ 2008-10-24 12:15 UTC (permalink / raw)
  To: Kamalesh Babulal, benh@kernel.crashing.org
  Cc: Stephen Rothwell, linux-next, LKML, linux-ide, bzolnier

Hello.

Kamalesh Babulal wrote:

>  next-20081024 randconfig build fails on the powerpc, with
>
> drivers/ide/pmac.c: In function 'pmac_ide_set_pio_mode':
> drivers/ide/pmac.c:527: error: implicit declaration of function 'kauai_lookup_timing'
> drivers/ide/pmac.c:527: error: 'shasta_pio_timings' undeclared (first use in this function)
> drivers/ide/pmac.c:527: error: (Each undeclared identifier is reported only once
> drivers/ide/pmac.c:527: error: for each function it appears in.)
> drivers/ide/pmac.c:534: error: 'kauai_pio_timings' undeclared (first use in this function)
> drivers/ide/pmac.c: In function 'pmac_ide_do_resume':
> drivers/ide/pmac.c:914: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> drivers/ide/pmac.c: At top level:
> drivers/ide/pmac.c:1007: error: 'pmac_ide_init_dma' undeclared here (not in a function)
> drivers/ide/pmac.c: In function 'pmac_ide_setup_device':
> drivers/ide/pmac.c:1107: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> drivers/ide/pmac.c: In function 'pmac_ide_macio_attach':
> drivers/ide/pmac.c:1209: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> drivers/ide/pmac.c:1210: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> make[2]: *** [drivers/ide/pmac.o] Error 1
>   

   Hm, looks like this configuration was never buildable -- #ifdef's are 
missing and wrongly placed. CCing Ben Herrenschmidt...

MBR, Sergei



^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  2008-10-24 12:15   ` Sergei Shtylyov
@ 2008-10-24 22:07     ` Benjamin Herrenschmidt
  2008-10-24 22:39       ` Sergei Shtylyov
  0 siblings, 1 reply; 12+ messages in thread
From: Benjamin Herrenschmidt @ 2008-10-24 22:07 UTC (permalink / raw)
  To: Sergei Shtylyov
  Cc: Kamalesh Babulal, Stephen Rothwell, linux-next, LKML, linux-ide,
	bzolnier

On Fri, 2008-10-24 at 16:15 +0400, Sergei Shtylyov wrote:
> Hello.
> 
> Kamalesh Babulal wrote:
> 
> >  next-20081024 randconfig build fails on the powerpc, with
> >
> > drivers/ide/pmac.c: In function 'pmac_ide_set_pio_mode':
> > drivers/ide/pmac.c:527: error: implicit declaration of function 'kauai_lookup_timing'
> > drivers/ide/pmac.c:527: error: 'shasta_pio_timings' undeclared (first use in this function)
> > drivers/ide/pmac.c:527: error: (Each undeclared identifier is reported only once
> > drivers/ide/pmac.c:527: error: for each function it appears in.)
> > drivers/ide/pmac.c:534: error: 'kauai_pio_timings' undeclared (first use in this function)
> > drivers/ide/pmac.c: In function 'pmac_ide_do_resume':
> > drivers/ide/pmac.c:914: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> > drivers/ide/pmac.c: At top level:
> > drivers/ide/pmac.c:1007: error: 'pmac_ide_init_dma' undeclared here (not in a function)
> > drivers/ide/pmac.c: In function 'pmac_ide_setup_device':
> > drivers/ide/pmac.c:1107: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> > drivers/ide/pmac.c: In function 'pmac_ide_macio_attach':
> > drivers/ide/pmac.c:1209: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> > drivers/ide/pmac.c:1210: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> > make[2]: *** [drivers/ide/pmac.o] Error 1
> >   
> 
>    Hm, looks like this configuration was never buildable -- #ifdef's are 
> missing and wrongly placed. CCing Ben Herrenschmidt...

What configuration ?

Ben.

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  2008-10-24 22:07     ` Benjamin Herrenschmidt
@ 2008-10-24 22:39       ` Sergei Shtylyov
  2008-10-24 23:10         ` Benjamin Herrenschmidt
  0 siblings, 1 reply; 12+ messages in thread
From: Sergei Shtylyov @ 2008-10-24 22:39 UTC (permalink / raw)
  To: benh
  Cc: Kamalesh Babulal, Stephen Rothwell, linux-next, LKML, linux-ide,
	bzolnier

Hello.

Benjamin Herrenschmidt wrote:

>>>  next-20081024 randconfig build fails on the powerpc, with
>>>
>>> drivers/ide/pmac.c: In function 'pmac_ide_set_pio_mode':
>>> drivers/ide/pmac.c:527: error: implicit declaration of function 'kauai_lookup_timing'
>>> drivers/ide/pmac.c:527: error: 'shasta_pio_timings' undeclared (first use in this function)
>>> drivers/ide/pmac.c:527: error: (Each undeclared identifier is reported only once
>>> drivers/ide/pmac.c:527: error: for each function it appears in.)
>>> drivers/ide/pmac.c:534: error: 'kauai_pio_timings' undeclared (first use in this function)
>>> drivers/ide/pmac.c: In function 'pmac_ide_do_resume':
>>> drivers/ide/pmac.c:914: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
>>> drivers/ide/pmac.c: At top level:
>>> drivers/ide/pmac.c:1007: error: 'pmac_ide_init_dma' undeclared here (not in a function)
>>> drivers/ide/pmac.c: In function 'pmac_ide_setup_device':
>>> drivers/ide/pmac.c:1107: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
>>> drivers/ide/pmac.c: In function 'pmac_ide_macio_attach':
>>> drivers/ide/pmac.c:1209: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
>>> drivers/ide/pmac.c:1210: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
>>> make[2]: *** [drivers/ide/pmac.o] Error 1
>>>   
>>>       
>>    Hm, looks like this configuration was never buildable -- #ifdef's are 
>> missing and wrongly placed. CCing Ben Herrenschmidt...
>>     
>
> What configuration ?
>   

   See the subject.

> Ben.

MBR, Sergei

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  2008-10-24 22:39       ` Sergei Shtylyov
@ 2008-10-24 23:10         ` Benjamin Herrenschmidt
  2008-10-25 13:19           ` Bartlomiej Zolnierkiewicz
  0 siblings, 1 reply; 12+ messages in thread
From: Benjamin Herrenschmidt @ 2008-10-24 23:10 UTC (permalink / raw)
  To: Sergei Shtylyov
  Cc: Kamalesh Babulal, Stephen Rothwell, linux-next, LKML, linux-ide,
	bzolnier

On Sat, 2008-10-25 at 02:39 +0400, Sergei Shtylyov wrote:
> >>    Hm, looks like this configuration was never buildable --
> #ifdef's are 
> >> missing and wrongly placed. CCing Ben Herrenschmidt...
> >>     
> >
> > What configuration ?
> >   
> 
>    See the subject.

Ah ok. We should probably just remove the option...

Ben.

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  2008-10-24 23:10         ` Benjamin Herrenschmidt
@ 2008-10-25 13:19           ` Bartlomiej Zolnierkiewicz
  2008-10-25 18:57             ` Sergei Shtylyov
  2008-12-07 14:27             ` Bartlomiej Zolnierkiewicz
  0 siblings, 2 replies; 12+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2008-10-25 13:19 UTC (permalink / raw)
  To: benh
  Cc: Sergei Shtylyov, Kamalesh Babulal, Stephen Rothwell, linux-next,
	LKML, linux-ide

On Saturday 25 October 2008, Benjamin Herrenschmidt wrote:
> On Sat, 2008-10-25 at 02:39 +0400, Sergei Shtylyov wrote:
> > >>    Hm, looks like this configuration was never buildable --
> > #ifdef's are 
> > >> missing and wrongly placed. CCing Ben Herrenschmidt...
> > >>     
> > >
> > > What configuration ?
> > >   
> > 
> >    See the subject.
> 
> Ah ok. We should probably just remove the option...

Fine with me.  Anybody want an easy +1 patch-point? :)

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  2008-10-25 13:19           ` Bartlomiej Zolnierkiewicz
@ 2008-10-25 18:57             ` Sergei Shtylyov
  2008-10-25 19:35               ` Bartlomiej Zolnierkiewicz
  2008-12-07 14:27             ` Bartlomiej Zolnierkiewicz
  1 sibling, 1 reply; 12+ messages in thread
From: Sergei Shtylyov @ 2008-10-25 18:57 UTC (permalink / raw)
  To: Bartlomiej Zolnierkiewicz
  Cc: benh, Kamalesh Babulal, Stephen Rothwell, linux-next, LKML,
	linux-ide

Hello.

Bartlomiej Zolnierkiewicz wrote:

>>>>>    Hm, looks like this configuration was never buildable -- #ifdef's are missing and wrongly placed. CCing Ben Herrenschmidt...   
>>>>>           
>>>> What configuration ?
>>>>   
>>>>         
>>>    See the subject.
>>>       
>> Ah ok. We should probably just remove the option...
>>     
>
> Fine with me.  Anybody want an easy +1 patch-point? :)
>   

   BTW, why this option selects BLK_DEV_IDEDMA_PCI?

MBR, Sergei

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  2008-10-25 18:57             ` Sergei Shtylyov
@ 2008-10-25 19:35               ` Bartlomiej Zolnierkiewicz
  0 siblings, 0 replies; 12+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2008-10-25 19:35 UTC (permalink / raw)
  To: Sergei Shtylyov
  Cc: benh, Kamalesh Babulal, Stephen Rothwell, linux-next, LKML,
	linux-ide

On Saturday 25 October 2008, Sergei Shtylyov wrote:
> Hello.
> 
> Bartlomiej Zolnierkiewicz wrote:
> 
> >>>>>    Hm, looks like this configuration was never buildable -- #ifdef's are missing and wrongly placed. CCing Ben Herrenschmidt...   
> >>>>>           
> >>>> What configuration ?
> >>>>   
> >>>>         
> >>>    See the subject.
> >>>       
> >> Ah ok. We should probably just remove the option...
> >>     
> >
> > Fine with me.  Anybody want an easy +1 patch-point? :)
> >   
> 
>    BTW, why this option selects BLK_DEV_IDEDMA_PCI?

Leftover from the dark-ages...  needs fixing.

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  2008-10-25 13:19           ` Bartlomiej Zolnierkiewicz
  2008-10-25 18:57             ` Sergei Shtylyov
@ 2008-12-07 14:27             ` Bartlomiej Zolnierkiewicz
  2008-12-08  9:05               ` Kamalesh Babulal
  1 sibling, 1 reply; 12+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2008-12-07 14:27 UTC (permalink / raw)
  To: benh
  Cc: Sergei Shtylyov, Kamalesh Babulal, Stephen Rothwell, linux-next,
	LKML, linux-ide

On Saturday 25 October 2008, Bartlomiej Zolnierkiewicz wrote:
> On Saturday 25 October 2008, Benjamin Herrenschmidt wrote:
> > On Sat, 2008-10-25 at 02:39 +0400, Sergei Shtylyov wrote:
> > > >>    Hm, looks like this configuration was never buildable --
> > > #ifdef's are 
> > > >> missing and wrongly placed. CCing Ben Herrenschmidt...
> > > >>     
> > > >
> > > > What configuration ?
> > > >   
> > > 
> > >    See the subject.
> > 
> > Ah ok. We should probably just remove the option...
> 
> Fine with me.  Anybody want an easy +1 patch-point? :)

Seems like ppc people are either very busy or don't care...  Oh well...

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] ide: build-fix for CONFIG_BLK_DEV_IDEDMA_PMAC=n

IDE pmac host driver build fails with CONFIG_BLK_DEV_IDEDMA_PMAC=n
as reported by Kamalesh:

> drivers/ide/pmac.c: In function 'pmac_ide_set_pio_mode':
> drivers/ide/pmac.c:527: error: implicit declaration of function 'kauai_lookup_timing'
> drivers/ide/pmac.c:527: error: 'shasta_pio_timings' undeclared (first use in this function)
> drivers/ide/pmac.c:527: error: (Each undeclared identifier is reported only once
> drivers/ide/pmac.c:527: error: for each function it appears in.)
> drivers/ide/pmac.c:534: error: 'kauai_pio_timings' undeclared (first use in this function)
> drivers/ide/pmac.c: In function 'pmac_ide_do_resume':
> drivers/ide/pmac.c:914: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> drivers/ide/pmac.c: At top level:
> drivers/ide/pmac.c:1007: error: 'pmac_ide_init_dma' undeclared here (not in a function)
> drivers/ide/pmac.c: In function 'pmac_ide_setup_device':
> drivers/ide/pmac.c:1107: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> drivers/ide/pmac.c: In function 'pmac_ide_macio_attach':
> drivers/ide/pmac.c:1209: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> drivers/ide/pmac.c:1210: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> make[2]: *** [drivers/ide/pmac.o] Error 1

Fix it by removing the superfluous config option.

Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/Kconfig |   14 +++-----------
 drivers/ide/pmac.c  |   30 +++---------------------------
 2 files changed, 6 insertions(+), 38 deletions(-)

Index: b/drivers/ide/Kconfig
===================================================================
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -655,10 +655,12 @@ config BLK_DEV_CELLEB
 
 endif
 
+# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
 config BLK_DEV_IDE_PMAC
 	tristate "PowerMac on-board IDE support"
 	depends on PPC_PMAC && IDE=y
 	select IDE_TIMINGS
+	select BLK_DEV_IDEDMA_PCI
 	help
 	  This driver provides support for the on-board IDE controller on
 	  most of the recent Apple Power Macintoshes and PowerBooks.
@@ -675,16 +677,6 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST
 	  CD-ROM on hda. This option changes this to more natural hda for
 	  hard disk and hdc for CD-ROM.
 
-config BLK_DEV_IDEDMA_PMAC
-	bool "PowerMac IDE DMA support"
-	depends on BLK_DEV_IDE_PMAC
-	select BLK_DEV_IDEDMA_PCI
-	help
-	  This option allows the driver for the on-board IDE controller on
-	  Power Macintoshes and PowerBooks to use DMA (direct memory access)
-	  to transfer data to and from memory.  Saying Y is safe and improves
-	  performance.
-
 config BLK_DEV_IDE_AU1XXX
        bool "IDE for AMD Alchemy Au1200"
        depends on SOC_AU1200
@@ -903,7 +895,7 @@ config BLK_DEV_UMC8672
 endif
 
 config BLK_DEV_IDEDMA
-	def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
+	def_bool BLK_DEV_IDEDMA_SFF || \
 		 BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 
 endif # IDE
Index: b/drivers/ide/pmac.c
===================================================================
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -66,7 +66,6 @@ typedef struct pmac_ide_hwif {
 	struct macio_dev		*mdev;
 	u32				timings[4];
 	volatile u32 __iomem *		*kauai_fcr;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
 	/* Those fields are duplicating what is in hwif. We currently
 	 * can't use the hwif ones because of some assumptions that are
 	 * beeing done by the generic code about the kind of dma controller
@@ -74,8 +73,6 @@ typedef struct pmac_ide_hwif {
 	 */
 	volatile struct dbdma_regs __iomem *	dma_regs;
 	struct dbdma_cmd*		dma_table_cpu;
-#endif
-	
 } pmac_ide_hwif_t;
 
 enum {
@@ -222,8 +219,6 @@ static const char* model_name[] = {
 #define KAUAI_FCR_UATA_RESET_N		0x00000002
 #define KAUAI_FCR_UATA_ENABLE		0x00000001
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
 /* Rounded Multiword DMA timings
  * 
  * I gave up finding a generic formula for all controller
@@ -413,8 +408,6 @@ static int pmac_ide_build_dmatable(ide_d
 static void pmac_ide_selectproc(ide_drive_t *drive);
 static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
 
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-
 #define PMAC_IDE_REG(x) \
 	((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
 
@@ -584,8 +577,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive
 	pmac_ide_do_update_timings(drive);
 }
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
 /*
  * Calculate KeyLargo ATA/66 UDMA timings
  */
@@ -786,7 +777,6 @@ set_timings_mdma(ide_drive_t *drive, int
 		drive->name, speed & 0xf,  *timings);
 #endif	
 }
-#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
 
 static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
@@ -804,7 +794,6 @@ static void pmac_ide_set_dma_mode(ide_dr
 	tl[0] = *timings;
 	tl[1] = *timings2;
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
 	if (speed >= XFER_UDMA_0) {
 		if (pmif->kind == controller_kl_ata4)
 			ret = set_timings_udma_ata4(&tl[0], speed);
@@ -817,7 +806,7 @@ static void pmac_ide_set_dma_mode(ide_dr
 			ret = -1;
 	} else
 		set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
 	if (ret)
 		return;
 
@@ -1008,9 +997,7 @@ static const struct ide_port_info pmac_p
 	.chipset		= ide_pmac,
 	.tp_ops			= &pmac_tp_ops,
 	.port_ops		= &pmac_ide_port_ops,
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
 	.dma_ops		= &pmac_dma_ops,
-#endif
 	.host_flags		= IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
 				  IDE_HFLAG_POST_SET_MODE |
 				  IDE_HFLAG_MMIO |
@@ -1182,7 +1169,7 @@ pmac_ide_macio_attach(struct macio_dev *
 	pmif->regbase = regbase;
 	pmif->irq = irq;
 	pmif->kauai_fcr = NULL;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+
 	if (macio_resource_count(mdev) >= 2) {
 		if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
 			printk(KERN_WARNING "ide-pmac: can't request DMA "
@@ -1192,7 +1179,7 @@ pmac_ide_macio_attach(struct macio_dev *
 			pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
 	} else
 		pmif->dma_regs = NULL;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
 	dev_set_drvdata(&mdev->ofdev.dev, pmif);
 
 	memset(&hw, 0, sizeof(hw));
@@ -1300,9 +1287,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev
 
 	base = ioremap(rbase, rlen);
 	pmif->regbase = (unsigned long) base + 0x2000;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
 	pmif->dma_regs = base + 0x1000;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
 	pmif->kauai_fcr = base;
 	pmif->irq = pdev->irq;
 
@@ -1434,8 +1419,6 @@ out:
 	return error;
 }
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
 /*
  * pmac_ide_build_dmatable builds the DBDMA command list
  * for a transfer and sets the DBDMA channel to point to it.
@@ -1723,13 +1706,6 @@ static int __devinit pmac_ide_init_dma(i
 
 	return 0;
 }
-#else
-static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
-				       const struct ide_port_info *d)
-{
-	return -EOPNOTSUPP;
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
 
 module_init(pmac_ide_probe);
 
\0

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  2008-12-07 14:27             ` Bartlomiej Zolnierkiewicz
@ 2008-12-08  9:05               ` Kamalesh Babulal
  2008-12-08 21:53                 ` Benjamin Herrenschmidt
  0 siblings, 1 reply; 12+ messages in thread
From: Kamalesh Babulal @ 2008-12-08  9:05 UTC (permalink / raw)
  To: Bartlomiej Zolnierkiewicz
  Cc: benh, Sergei Shtylyov, Stephen Rothwell, linux-next, LKML,
	linux-ide

* Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> [2008-12-07 15:27:52]:

> On Saturday 25 October 2008, Bartlomiej Zolnierkiewicz wrote:
> > On Saturday 25 October 2008, Benjamin Herrenschmidt wrote:
> > > On Sat, 2008-10-25 at 02:39 +0400, Sergei Shtylyov wrote:
> > > > >>    Hm, looks like this configuration was never buildable --
> > > > #ifdef's are 
> > > > >> missing and wrongly placed. CCing Ben Herrenschmidt...
> > > > >>     
> > > > >
> > > > > What configuration ?
> > > > >   
> > > > 
> > > >    See the subject.
> > > 
> > > Ah ok. We should probably just remove the option...
> > 
> > Fine with me.  Anybody want an easy +1 patch-point? :)
> 
> Seems like ppc people are either very busy or don't care...  Oh well...
> 
> From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Subject: [PATCH] ide: build-fix for CONFIG_BLK_DEV_IDEDMA_PMAC=n
> 
> IDE pmac host driver build fails with CONFIG_BLK_DEV_IDEDMA_PMAC=n
> as reported by Kamalesh:
> 
> > drivers/ide/pmac.c: In function 'pmac_ide_set_pio_mode':
> > drivers/ide/pmac.c:527: error: implicit declaration of function 'kauai_lookup_timing'
> > drivers/ide/pmac.c:527: error: 'shasta_pio_timings' undeclared (first use in this function)
> > drivers/ide/pmac.c:527: error: (Each undeclared identifier is reported only once
> > drivers/ide/pmac.c:527: error: for each function it appears in.)
> > drivers/ide/pmac.c:534: error: 'kauai_pio_timings' undeclared (first use in this function)
> > drivers/ide/pmac.c: In function 'pmac_ide_do_resume':
> > drivers/ide/pmac.c:914: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> > drivers/ide/pmac.c: At top level:
> > drivers/ide/pmac.c:1007: error: 'pmac_ide_init_dma' undeclared here (not in a function)
> > drivers/ide/pmac.c: In function 'pmac_ide_setup_device':
> > drivers/ide/pmac.c:1107: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> > drivers/ide/pmac.c: In function 'pmac_ide_macio_attach':
> > drivers/ide/pmac.c:1209: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> > drivers/ide/pmac.c:1210: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> > make[2]: *** [drivers/ide/pmac.o] Error 1
> 
> Fix it by removing the superfluous config option.

Thanks for the patch, it fixes the build failure.
> 
> Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> ---
>  drivers/ide/Kconfig |   14 +++-----------
>  drivers/ide/pmac.c  |   30 +++---------------------------
>  2 files changed, 6 insertions(+), 38 deletions(-)
> 
> Index: b/drivers/ide/Kconfig
> ===================================================================
> --- a/drivers/ide/Kconfig
> +++ b/drivers/ide/Kconfig
> @@ -655,10 +655,12 @@ config BLK_DEV_CELLEB
>  
>  endif
>  
> +# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
>  config BLK_DEV_IDE_PMAC
>  	tristate "PowerMac on-board IDE support"
>  	depends on PPC_PMAC && IDE=y
>  	select IDE_TIMINGS
> +	select BLK_DEV_IDEDMA_PCI
>  	help
>  	  This driver provides support for the on-board IDE controller on
>  	  most of the recent Apple Power Macintoshes and PowerBooks.
> @@ -675,16 +677,6 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST
>  	  CD-ROM on hda. This option changes this to more natural hda for
>  	  hard disk and hdc for CD-ROM.
>  
> -config BLK_DEV_IDEDMA_PMAC
> -	bool "PowerMac IDE DMA support"
> -	depends on BLK_DEV_IDE_PMAC
> -	select BLK_DEV_IDEDMA_PCI
> -	help
> -	  This option allows the driver for the on-board IDE controller on
> -	  Power Macintoshes and PowerBooks to use DMA (direct memory access)
> -	  to transfer data to and from memory.  Saying Y is safe and improves
> -	  performance.
> -
>  config BLK_DEV_IDE_AU1XXX
>         bool "IDE for AMD Alchemy Au1200"
>         depends on SOC_AU1200
> @@ -903,7 +895,7 @@ config BLK_DEV_UMC8672
>  endif
>  
>  config BLK_DEV_IDEDMA
> -	def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
> +	def_bool BLK_DEV_IDEDMA_SFF || \
>  		 BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
>  
>  endif # IDE
> Index: b/drivers/ide/pmac.c
> ===================================================================
> --- a/drivers/ide/pmac.c
> +++ b/drivers/ide/pmac.c
> @@ -66,7 +66,6 @@ typedef struct pmac_ide_hwif {
>  	struct macio_dev		*mdev;
>  	u32				timings[4];
>  	volatile u32 __iomem *		*kauai_fcr;
> -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
>  	/* Those fields are duplicating what is in hwif. We currently
>  	 * can't use the hwif ones because of some assumptions that are
>  	 * beeing done by the generic code about the kind of dma controller
> @@ -74,8 +73,6 @@ typedef struct pmac_ide_hwif {
>  	 */
>  	volatile struct dbdma_regs __iomem *	dma_regs;
>  	struct dbdma_cmd*		dma_table_cpu;
> -#endif
> -	
>  } pmac_ide_hwif_t;
>  
>  enum {
> @@ -222,8 +219,6 @@ static const char* model_name[] = {
>  #define KAUAI_FCR_UATA_RESET_N		0x00000002
>  #define KAUAI_FCR_UATA_ENABLE		0x00000001
>  
> -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> -
>  /* Rounded Multiword DMA timings
>   * 
>   * I gave up finding a generic formula for all controller
> @@ -413,8 +408,6 @@ static int pmac_ide_build_dmatable(ide_d
>  static void pmac_ide_selectproc(ide_drive_t *drive);
>  static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
>  
> -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
> -
>  #define PMAC_IDE_REG(x) \
>  	((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
>  
> @@ -584,8 +577,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive
>  	pmac_ide_do_update_timings(drive);
>  }
>  
> -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> -
>  /*
>   * Calculate KeyLargo ATA/66 UDMA timings
>   */
> @@ -786,7 +777,6 @@ set_timings_mdma(ide_drive_t *drive, int
>  		drive->name, speed & 0xf,  *timings);
>  #endif	
>  }
> -#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
>  
>  static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
>  {
> @@ -804,7 +794,6 @@ static void pmac_ide_set_dma_mode(ide_dr
>  	tl[0] = *timings;
>  	tl[1] = *timings2;
>  
> -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
>  	if (speed >= XFER_UDMA_0) {
>  		if (pmif->kind == controller_kl_ata4)
>  			ret = set_timings_udma_ata4(&tl[0], speed);
> @@ -817,7 +806,7 @@ static void pmac_ide_set_dma_mode(ide_dr
>  			ret = -1;
>  	} else
>  		set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
> -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
> +
>  	if (ret)
>  		return;
>  
> @@ -1008,9 +997,7 @@ static const struct ide_port_info pmac_p
>  	.chipset		= ide_pmac,
>  	.tp_ops			= &pmac_tp_ops,
>  	.port_ops		= &pmac_ide_port_ops,
> -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
>  	.dma_ops		= &pmac_dma_ops,
> -#endif
>  	.host_flags		= IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
>  				  IDE_HFLAG_POST_SET_MODE |
>  				  IDE_HFLAG_MMIO |
> @@ -1182,7 +1169,7 @@ pmac_ide_macio_attach(struct macio_dev *
>  	pmif->regbase = regbase;
>  	pmif->irq = irq;
>  	pmif->kauai_fcr = NULL;
> -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> +
>  	if (macio_resource_count(mdev) >= 2) {
>  		if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
>  			printk(KERN_WARNING "ide-pmac: can't request DMA "
> @@ -1192,7 +1179,7 @@ pmac_ide_macio_attach(struct macio_dev *
>  			pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
>  	} else
>  		pmif->dma_regs = NULL;
> -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
> +
>  	dev_set_drvdata(&mdev->ofdev.dev, pmif);
>  
>  	memset(&hw, 0, sizeof(hw));
> @@ -1300,9 +1287,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev
>  
>  	base = ioremap(rbase, rlen);
>  	pmif->regbase = (unsigned long) base + 0x2000;
> -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
>  	pmif->dma_regs = base + 0x1000;
> -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
>  	pmif->kauai_fcr = base;
>  	pmif->irq = pdev->irq;
>  
> @@ -1434,8 +1419,6 @@ out:
>  	return error;
>  }
>  
> -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> -
>  /*
>   * pmac_ide_build_dmatable builds the DBDMA command list
>   * for a transfer and sets the DBDMA channel to point to it.
> @@ -1723,13 +1706,6 @@ static int __devinit pmac_ide_init_dma(i
>  
>  	return 0;
>  }
> -#else
> -static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
> -				       const struct ide_port_info *d)
> -{
> -	return -EOPNOTSUPP;
> -}
> -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
>  
>  module_init(pmac_ide_probe);
>  
> 
-- 
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  2008-12-08  9:05               ` Kamalesh Babulal
@ 2008-12-08 21:53                 ` Benjamin Herrenschmidt
  2008-12-08 21:54                   ` Benjamin Herrenschmidt
  0 siblings, 1 reply; 12+ messages in thread
From: Benjamin Herrenschmidt @ 2008-12-08 21:53 UTC (permalink / raw)
  To: Kamalesh Babulal
  Cc: Bartlomiej Zolnierkiewicz, Sergei Shtylyov, Stephen Rothwell,
	linux-next, LKML, linux-ide


> > Seems like ppc people are either very busy or don't care...  Oh well...

Very busy will do it :-) Among others, having a second child is a hit on
the hacking time !

In any case, I think we should contemplate removing the config option
alltogether and make DMA support built unconditionally to simplify the
mess, don't you think ?

Cheers,
Ben.

> > From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> > Subject: [PATCH] ide: build-fix for CONFIG_BLK_DEV_IDEDMA_PMAC=n
> > 
> > IDE pmac host driver build fails with CONFIG_BLK_DEV_IDEDMA_PMAC=n
> > as reported by Kamalesh:
> > 
> > > drivers/ide/pmac.c: In function 'pmac_ide_set_pio_mode':
> > > drivers/ide/pmac.c:527: error: implicit declaration of function 'kauai_lookup_timing'
> > > drivers/ide/pmac.c:527: error: 'shasta_pio_timings' undeclared (first use in this function)
> > > drivers/ide/pmac.c:527: error: (Each undeclared identifier is reported only once
> > > drivers/ide/pmac.c:527: error: for each function it appears in.)
> > > drivers/ide/pmac.c:534: error: 'kauai_pio_timings' undeclared (first use in this function)
> > > drivers/ide/pmac.c: In function 'pmac_ide_do_resume':
> > > drivers/ide/pmac.c:914: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> > > drivers/ide/pmac.c: At top level:
> > > drivers/ide/pmac.c:1007: error: 'pmac_ide_init_dma' undeclared here (not in a function)
> > > drivers/ide/pmac.c: In function 'pmac_ide_setup_device':
> > > drivers/ide/pmac.c:1107: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> > > drivers/ide/pmac.c: In function 'pmac_ide_macio_attach':
> > > drivers/ide/pmac.c:1209: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> > > drivers/ide/pmac.c:1210: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> > > make[2]: *** [drivers/ide/pmac.o] Error 1
> > 
> > Fix it by removing the superfluous config option.
> 
> Thanks for the patch, it fixes the build failure.
> > 
> > Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
> > Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
> > Cc: Stephen Rothwell <sfr@canb.auug.org.au>
> > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> > ---
> >  drivers/ide/Kconfig |   14 +++-----------
> >  drivers/ide/pmac.c  |   30 +++---------------------------
> >  2 files changed, 6 insertions(+), 38 deletions(-)
> > 
> > Index: b/drivers/ide/Kconfig
> > ===================================================================
> > --- a/drivers/ide/Kconfig
> > +++ b/drivers/ide/Kconfig
> > @@ -655,10 +655,12 @@ config BLK_DEV_CELLEB
> >  
> >  endif
> >  
> > +# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
> >  config BLK_DEV_IDE_PMAC
> >  	tristate "PowerMac on-board IDE support"
> >  	depends on PPC_PMAC && IDE=y
> >  	select IDE_TIMINGS
> > +	select BLK_DEV_IDEDMA_PCI
> >  	help
> >  	  This driver provides support for the on-board IDE controller on
> >  	  most of the recent Apple Power Macintoshes and PowerBooks.
> > @@ -675,16 +677,6 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST
> >  	  CD-ROM on hda. This option changes this to more natural hda for
> >  	  hard disk and hdc for CD-ROM.
> >  
> > -config BLK_DEV_IDEDMA_PMAC
> > -	bool "PowerMac IDE DMA support"
> > -	depends on BLK_DEV_IDE_PMAC
> > -	select BLK_DEV_IDEDMA_PCI
> > -	help
> > -	  This option allows the driver for the on-board IDE controller on
> > -	  Power Macintoshes and PowerBooks to use DMA (direct memory access)
> > -	  to transfer data to and from memory.  Saying Y is safe and improves
> > -	  performance.
> > -
> >  config BLK_DEV_IDE_AU1XXX
> >         bool "IDE for AMD Alchemy Au1200"
> >         depends on SOC_AU1200
> > @@ -903,7 +895,7 @@ config BLK_DEV_UMC8672
> >  endif
> >  
> >  config BLK_DEV_IDEDMA
> > -	def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
> > +	def_bool BLK_DEV_IDEDMA_SFF || \
> >  		 BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
> >  
> >  endif # IDE
> > Index: b/drivers/ide/pmac.c
> > ===================================================================
> > --- a/drivers/ide/pmac.c
> > +++ b/drivers/ide/pmac.c
> > @@ -66,7 +66,6 @@ typedef struct pmac_ide_hwif {
> >  	struct macio_dev		*mdev;
> >  	u32				timings[4];
> >  	volatile u32 __iomem *		*kauai_fcr;
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> >  	/* Those fields are duplicating what is in hwif. We currently
> >  	 * can't use the hwif ones because of some assumptions that are
> >  	 * beeing done by the generic code about the kind of dma controller
> > @@ -74,8 +73,6 @@ typedef struct pmac_ide_hwif {
> >  	 */
> >  	volatile struct dbdma_regs __iomem *	dma_regs;
> >  	struct dbdma_cmd*		dma_table_cpu;
> > -#endif
> > -	
> >  } pmac_ide_hwif_t;
> >  
> >  enum {
> > @@ -222,8 +219,6 @@ static const char* model_name[] = {
> >  #define KAUAI_FCR_UATA_RESET_N		0x00000002
> >  #define KAUAI_FCR_UATA_ENABLE		0x00000001
> >  
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> > -
> >  /* Rounded Multiword DMA timings
> >   * 
> >   * I gave up finding a generic formula for all controller
> > @@ -413,8 +408,6 @@ static int pmac_ide_build_dmatable(ide_d
> >  static void pmac_ide_selectproc(ide_drive_t *drive);
> >  static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
> >  
> > -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
> > -
> >  #define PMAC_IDE_REG(x) \
> >  	((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
> >  
> > @@ -584,8 +577,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive
> >  	pmac_ide_do_update_timings(drive);
> >  }
> >  
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> > -
> >  /*
> >   * Calculate KeyLargo ATA/66 UDMA timings
> >   */
> > @@ -786,7 +777,6 @@ set_timings_mdma(ide_drive_t *drive, int
> >  		drive->name, speed & 0xf,  *timings);
> >  #endif	
> >  }
> > -#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
> >  
> >  static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
> >  {
> > @@ -804,7 +794,6 @@ static void pmac_ide_set_dma_mode(ide_dr
> >  	tl[0] = *timings;
> >  	tl[1] = *timings2;
> >  
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> >  	if (speed >= XFER_UDMA_0) {
> >  		if (pmif->kind == controller_kl_ata4)
> >  			ret = set_timings_udma_ata4(&tl[0], speed);
> > @@ -817,7 +806,7 @@ static void pmac_ide_set_dma_mode(ide_dr
> >  			ret = -1;
> >  	} else
> >  		set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
> > -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
> > +
> >  	if (ret)
> >  		return;
> >  
> > @@ -1008,9 +997,7 @@ static const struct ide_port_info pmac_p
> >  	.chipset		= ide_pmac,
> >  	.tp_ops			= &pmac_tp_ops,
> >  	.port_ops		= &pmac_ide_port_ops,
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> >  	.dma_ops		= &pmac_dma_ops,
> > -#endif
> >  	.host_flags		= IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
> >  				  IDE_HFLAG_POST_SET_MODE |
> >  				  IDE_HFLAG_MMIO |
> > @@ -1182,7 +1169,7 @@ pmac_ide_macio_attach(struct macio_dev *
> >  	pmif->regbase = regbase;
> >  	pmif->irq = irq;
> >  	pmif->kauai_fcr = NULL;
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> > +
> >  	if (macio_resource_count(mdev) >= 2) {
> >  		if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
> >  			printk(KERN_WARNING "ide-pmac: can't request DMA "
> > @@ -1192,7 +1179,7 @@ pmac_ide_macio_attach(struct macio_dev *
> >  			pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
> >  	} else
> >  		pmif->dma_regs = NULL;
> > -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
> > +
> >  	dev_set_drvdata(&mdev->ofdev.dev, pmif);
> >  
> >  	memset(&hw, 0, sizeof(hw));
> > @@ -1300,9 +1287,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev
> >  
> >  	base = ioremap(rbase, rlen);
> >  	pmif->regbase = (unsigned long) base + 0x2000;
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> >  	pmif->dma_regs = base + 0x1000;
> > -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
> >  	pmif->kauai_fcr = base;
> >  	pmif->irq = pdev->irq;
> >  
> > @@ -1434,8 +1419,6 @@ out:
> >  	return error;
> >  }
> >  
> > -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> > -
> >  /*
> >   * pmac_ide_build_dmatable builds the DBDMA command list
> >   * for a transfer and sets the DBDMA channel to point to it.
> > @@ -1723,13 +1706,6 @@ static int __devinit pmac_ide_init_dma(i
> >  
> >  	return 0;
> >  }
> > -#else
> > -static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
> > -				       const struct ide_port_info *d)
> > -{
> > -	return -EOPNOTSUPP;
> > -}
> > -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
> >  
> >  module_init(pmac_ide_probe);
> >  
> > &#0;
> 


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  2008-12-08 21:53                 ` Benjamin Herrenschmidt
@ 2008-12-08 21:54                   ` Benjamin Herrenschmidt
  0 siblings, 0 replies; 12+ messages in thread
From: Benjamin Herrenschmidt @ 2008-12-08 21:54 UTC (permalink / raw)
  To: Kamalesh Babulal
  Cc: Bartlomiej Zolnierkiewicz, Sergei Shtylyov, Stephen Rothwell,
	linux-next, LKML, linux-ide

On Tue, 2008-12-09 at 08:53 +1100, Benjamin Herrenschmidt wrote:
> > > Seems like ppc people are either very busy or don't care...  Oh well...
> 
> Very busy will do it :-) Among others, having a second child is a hit on
> the hacking time !
> 
> In any case, I think we should contemplate removing the config option
> alltogether and make DMA support built unconditionally to simplify the
> mess, don't you think ?

Which is just what the patch does .. :-)

So Ack.

Cheers,
Ben.

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2008-12-08 21:55 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <20081024171932.1e8131d0.sfr@canb.auug.org.au>
2008-10-24 11:38 ` linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC Kamalesh Babulal
2008-10-24 12:15   ` Sergei Shtylyov
2008-10-24 22:07     ` Benjamin Herrenschmidt
2008-10-24 22:39       ` Sergei Shtylyov
2008-10-24 23:10         ` Benjamin Herrenschmidt
2008-10-25 13:19           ` Bartlomiej Zolnierkiewicz
2008-10-25 18:57             ` Sergei Shtylyov
2008-10-25 19:35               ` Bartlomiej Zolnierkiewicz
2008-12-07 14:27             ` Bartlomiej Zolnierkiewicz
2008-12-08  9:05               ` Kamalesh Babulal
2008-12-08 21:53                 ` Benjamin Herrenschmidt
2008-12-08 21:54                   ` Benjamin Herrenschmidt

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).