From: Lars Michael Jogback <lm@jogback.se>
To: Tejun Heo <tj@kernel.org>
Cc: linux-ide@vger.kernel.org
Subject: Re: Problem w/ hotplug on sata_sil24 w/ PMP (sil3726)
Date: Mon, 27 Oct 2008 20:40:38 +0100 [thread overview]
Message-ID: <20081027194038.GA7004@cleopatra.jogback.se> (raw)
In-Reply-To: <49056FEA.4070405@kernel.org>
* Tejun Heo <tj@kernel.org> [2008-10-27 16:38:18]:
> Oh.. one more thing. Can you please try the attached patch and post the
> failing log?
Yank the drive:
[ 423.185630] ata7: XXX error_intr irq_stat=0x8040800
[ 423.200853] ata7.02: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xf
[ 423.200930] ata7: SError: { PHYRdyChg CommWake DevExch }
[ 423.201065] ata7.02: hard resetting link
[ 423.988033] ata7.02: SATA link down (SStatus 0 SControl 320)
[ 423.988033] ata7: failed to recover some devices, retrying in 5 secs
[ 429.320975] ata7.02: hard resetting link
[ 429.657112] ata7.02: SATA link down (SStatus 0 SControl 320)
[ 429.657215] ata7: failed to recover some devices, retrying in 5 secs
[ 435.205828] ata7.02: hard resetting link
[ 435.663470] ata7.02: SATA link down (SStatus 0 SControl 320)
[ 435.663573] ata7.02: disabled
[ 436.233999] ata7: EH complete
[ 436.234100] ata7.02: detaching (SCSI 7:2:0:0)
[ 436.234390] sd 7:2:0:0: [sdn] Synchronizing SCSI cache
[ 436.237266] sd 7:2:0:0: [sdn] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 436.237399] sd 7:2:0:0: [sdn] Stopping disk
[ 436.237471] sd 7:2:0:0: [sdn] START_STOP FAILED
[ 436.237537] sd 7:2:0:0: [sdn] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
Hotplug the drive:
[ 457.946173] ata7: XXX error_intr irq_stat=0x8040800
[ 457.946173] ata7: XXX error_intr irq_stat=0x8000800
[ 457.959773] ata7.02: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xf
[ 457.959849] ata7: SError: { PHYRdyChg CommWake DevExch }
[ 457.959985] ata7.02: hard resetting link
[ 458.740089] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 458.740173] ata7: XXX error_intr irq_stat=0x60002
[ 458.740252] ata7: XXX error_intr cerr=4
[ 458.755959] ata7.02: failed to IDENTIFY (I/O error, err_mask=0x11)
[ 458.756096] ata7.15: hard resetting link
[ 461.059644] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 461.059946] ata7.00: hard resetting link
[ 461.395778] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 461.395852] ata7.01: hard resetting link
[ 461.736413] ata7.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 461.736490] ata7.02: hard resetting link
[ 462.107859] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 462.107935] ata7.03: hard resetting link
[ 462.471134] ata7.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 462.471210] ata7.04: hard resetting link
[ 462.810982] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 462.811057] ata7.05: hard resetting link
[ 463.146993] ata7.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[ 463.159869] ata7.00: configured for UDMA/100
[ 463.172734] ata7.01: configured for UDMA/100
[ 463.172811] ata7: XXX error_intr irq_stat=0x60002
[ 463.172882] ata7: XXX error_intr cerr=4
[ 463.186852] ata7.02: failed to IDENTIFY (I/O error, err_mask=0x11)
[ 463.186927] ata7.15: hard resetting link
[ 465.319661] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 465.319970] ata7.00: hard resetting link
[ 465.657449] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 465.657525] ata7.01: hard resetting link
[ 465.992843] ata7.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 465.992918] ata7.02: hard resetting link
[ 466.328237] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 466.328312] ata7.03: hard resetting link
[ 466.663786] ata7.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 466.663861] ata7.04: hard resetting link
[ 467.002569] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 467.002646] ata7.05: hard resetting link
[ 467.336553] ata7.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[ 467.351825] ata7.00: configured for UDMA/100
[ 467.364948] ata7.01: configured for UDMA/100
[ 467.365025] ata7: XXX error_intr irq_stat=0x60002
[ 467.365096] ata7: XXX error_intr cerr=4
[ 467.379054] ata7.02: failed to IDENTIFY (I/O error, err_mask=0x11)
[ 467.379128] ata7.02: failed to recover link after 3 tries, disabling
[ 467.379200] ata7: failed to recover PMP, retrying in 5 secs
[ 472.390964] ata7.15: hard resetting link
[ 474.544791] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 474.859237] ata7.00: hard resetting link
[ 475.195706] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 475.195793] ata7.01: hard resetting link
[ 475.535565] ata7.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 475.535641] ata7.03: hard resetting link
[ 475.871163] ata7.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 475.871238] ata7.04: hard resetting link
[ 476.208521] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 476.208597] ata7.05: hard resetting link
[ 476.547685] ata7.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[ 476.560025] ata7.00: configured for UDMA/100
[ 476.572026] ata7.01: configured for UDMA/100
[ 476.584854] ata7.03: configured for UDMA/100
[ 476.597676] ata7.04: configured for UDMA/100
[ 476.935580] ata7: EH complete
[ 476.935691] sd 7:0:0:0: [sdl] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.935798] sd 7:0:0:0: [sdl] Write Protect is off
[ 476.935865] sd 7:0:0:0: [sdl] Mode Sense: 00 3a 00 00
[ 476.935885] sd 7:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 476.935991] sd 7:1:0:0: [sdm] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.936086] sd 7:1:0:0: [sdm] Write Protect is off
[ 476.936152] sd 7:1:0:0: [sdm] Mode Sense: 00 3a 00 00
[ 476.936171] sd 7:1:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 476.936276] sd 7:3:0:0: [sdo] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.936370] sd 7:3:0:0: [sdo] Write Protect is off
[ 476.936437] sd 7:3:0:0: [sdo] Mode Sense: 00 3a 00 00
[ 476.936456] sd 7:3:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 476.936561] sd 7:4:0:0: [sdp] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.936655] sd 7:4:0:0: [sdp] Write Protect is off
[ 476.936722] sd 7:4:0:0: [sdp] Mode Sense: 00 3a 00 00
[ 476.936740] sd 7:4:0:0: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 476.936845] sd 7:0:0:0: [sdl] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.936938] sd 7:0:0:0: [sdl] Write Protect is off
[ 476.937005] sd 7:0:0:0: [sdl] Mode Sense: 00 3a 00 00
[ 476.937024] sd 7:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 476.937128] sd 7:1:0:0: [sdm] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.937236] sd 7:1:0:0: [sdm] Write Protect is off
[ 476.937303] sd 7:1:0:0: [sdm] Mode Sense: 00 3a 00 00
[ 476.937322] sd 7:1:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 476.937427] sd 7:3:0:0: [sdo] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.937521] sd 7:3:0:0: [sdo] Write Protect is off
[ 476.937588] sd 7:3:0:0: [sdo] Mode Sense: 00 3a 00 00
[ 476.937606] sd 7:3:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 476.937710] sd 7:4:0:0: [sdp] 1953525168 512-byte hardware sectors (1000205 MB)
[ 476.937804] sd 7:4:0:0: [sdp] Write Protect is off
[ 476.937871] sd 7:4:0:0: [sdp] Mode Sense: 00 3a 00 00
[ 476.937890] sd 7:4:0:0: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Best Regards,
/LM
next prev parent reply other threads:[~2008-10-27 19:44 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-11 14:27 Problem w/ hotplug on sata_sil24 w/ PMP (sil3726) Lars Michael Jogback
2008-10-14 5:51 ` Tejun Heo
2008-10-14 20:19 ` Lars Michael Jogback
2008-10-15 7:03 ` Tejun Heo
2008-10-18 16:52 ` Lars Michael Jogback
2008-10-23 18:14 ` Lars Michael Jogback
2008-10-27 7:35 ` Tejun Heo
2008-10-27 7:38 ` Tejun Heo
2008-10-27 8:47 ` Lars Michael Jogback
2008-10-27 19:40 ` Lars Michael Jogback [this message]
2008-11-10 6:47 ` Tejun Heo
2008-11-10 18:26 ` Lars Michael Jogback
2008-11-11 2:56 ` Tejun Heo
[not found] <359604ECF8F440408B9634E6146249B42923805F@mail.scl.local>
[not found] ` <20110628095723.GC3386@htj.dyndns.org>
2011-06-30 17:53 ` Derry Bryson
2011-07-12 15:01 ` tj
2011-07-12 19:21 ` Derry Bryson
2011-07-13 13:34 ` tj
2011-07-13 14:39 ` tj
2011-07-13 16:23 ` Derry Bryson
2011-07-14 7:14 ` tj
2011-07-14 17:37 ` Derry Bryson
2011-07-21 9:00 ` tj
2011-07-21 16:22 ` Derry Bryson
2011-07-22 9:50 ` tj
2011-07-22 17:29 ` Derry Bryson
2011-07-22 19:34 ` Derry Bryson
2011-07-30 12:54 ` tj
2011-09-30 21:54 ` Mike I
2011-10-06 5:48 ` Gwendal Grignou
[not found] ` <CAMHSBOV8rSW3jumpx8URZrgo8w1He9zruP7yAOw7uhQOaAj3Xg@mail.gmail.com>
2011-10-06 6:07 ` Gwendal Grignou
2011-10-08 18:25 ` Michael Ihrcke
2011-10-12 2:06 ` Michael Ihrcke
2011-10-13 2:09 ` Mike I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081027194038.GA7004@cleopatra.jogback.se \
--to=lm@jogback.se \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).