From: bugme-daemon@bugzilla.kernel.org
To: linux-ide@vger.kernel.org
Subject: [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
Date: Sun, 9 Nov 2008 11:47:42 -0800 (PST) [thread overview]
Message-ID: <20081109194742.E0F85108041@picon.linux-foundation.org> (raw)
In-Reply-To: <bug-11943-11633@http.bugzilla.kernel.org/>
http://bugzilla.kernel.org/show_bug.cgi?id=11943
------- Comment #11 from eshaffer1@mac.com 2008-11-09 11:47 -------
ubuntu@ubuntu:~$ lspci -vvxxx
00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort+ >SERR- <PERR+
Latency: 0, Cache Line Size: 32 bytes
00: 57 10 02 00 06 00 80 b0 40 00 00 06 08 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 02)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80800000-808fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00: 11 10 26 00 07 01 b0 02 02 00 04 06 00 40 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 11 11 a0 a2
20: 80 80 80 80 81 80 71 80 00 00 00 00 00 00 00 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 06 03
00:10.0 VGA compatible controller: ATI Technologies Inc Radeon R100 QD [Radeon
7200] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Unknown device 0908
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at 88000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at 80980000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: <access denied>
00: 02 10 44 51 87 00 b0 02 00 00 00 03 08 10 00 00
10: 08 00 00 88 01 04 00 00 00 00 98 80 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 08 09
30: 00 00 00 80 50 00 00 00 00 00 00 00 ff 01 08 00
01:00.0 FireWire (IEEE 1394): Texas Instruments PCILynx/PCILynx2 IEEE 1394 Link
Layer Controller (rev 02) (prog-if 00 [Generic])
Subsystem: Apple Computer Inc. Unknown device 001c
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (750ns min, 1000ns max), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at 80881000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at 808c0000 (32-bit, non-prefetchable) [size=64K]
Region 2: Memory at 808b0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 808a0000 [disabled] [size=64K]
00: 4c 10 00 80 16 00 00 02 02 00 00 0c 20 10 00 00
10: 00 10 88 80 00 00 8c 80 00 00 8b 80 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 6b 10 1c 00
30: 00 00 8a 80 00 00 00 00 00 00 00 00 00 01 03 04
01:01.0 IDE interface: Silicon Image, Inc. PCI0646 (rev 05) (prog-if 8f [Master
SecP SecO PriP PriO])
Subsystem: Silicon Image, Inc. PCI0646
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 10e0 [size=8]
Region 1: I/O ports at 10d0 [size=4]
Region 2: I/O ports at 10c0 [size=8]
Region 3: I/O ports at 10b0 [size=4]
Region 4: I/O ports at 10a0 [size=16]
Capabilities: <access denied>
00: 95 10 46 06 05 00 90 02 05 8f 01 01 00 40 00 00
10: e1 10 00 00 d1 10 00 00 c1 10 00 00 b1 10 00 00
20: a1 10 00 00 00 00 00 00 00 00 00 00 95 10 46 06
30: 00 00 00 00 60 00 00 00 00 00 00 00 0e 01 02 04
01:04.0 SCSI storage controller: Artop Electronic Corp ATP860 (rev 01)
Subsystem: Artop Electronic Corp ATP860
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (1500ns min, 1500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at 1090 [size=8]
Region 1: I/O ports at 1080 [size=4]
Region 2: I/O ports at 1070 [size=8]
Region 3: I/O ports at 1060 [size=4]
Region 4: I/O ports at 1050 [size=16]
Expansion ROM at 80890000 [disabled] [size=64K]
Capabilities: <access denied>
00: 91 11 07 00 15 00 90 02 01 00 00 01 08 10 00 00
10: 91 10 00 00 81 10 00 00 71 10 00 00 61 10 00 00
20: 51 10 00 00 00 00 00 00 00 00 00 00 91 11 07 00
30: 00 00 89 80 58 00 00 00 00 00 00 00 00 01 06 06
01:05.0 Class ff00: Apple Computer Inc. Paddington Mac I/O
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80800000 (32-bit, non-prefetchable) [size=512K]
00: 6b 10 17 00 16 00 00 82 00 00 00 ff 08 10 00 00
10: 00 00 80 80 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:06.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI])
Subsystem: OPTi Inc. 82C861
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 16, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 80880000 (32-bit, non-prefetchable) [size=4K]
00: 45 10 61 c8 16 00 80 82 10 10 03 0c 08 10 00 00
10: 00 00 88 80 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 45 10 61 c8
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
next prev parent reply other threads:[~2008-11-09 19:48 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <bug-11943-11633@http.bugzilla.kernel.org/>
2008-11-03 12:48 ` [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260 bugme-daemon
2008-11-03 12:52 ` bugme-daemon
2008-11-03 18:03 ` bugme-daemon
2008-11-03 18:16 ` bugme-daemon
2008-11-06 23:50 ` bugme-daemon
2008-11-08 3:13 ` bugme-daemon
2008-11-08 3:13 ` bugme-daemon
2008-11-09 16:07 ` bugme-daemon
2008-11-09 16:08 ` bugme-daemon
2008-11-09 16:58 ` bugme-daemon
2008-11-09 19:47 ` bugme-daemon [this message]
2008-11-09 19:59 ` bugme-daemon
2008-11-09 21:15 ` bugme-daemon
2008-11-09 21:50 ` bugme-daemon
2008-11-09 22:05 ` bugme-daemon
2008-11-09 22:26 ` bugme-daemon
2008-11-09 22:40 ` bugme-daemon
2008-11-09 23:00 ` bugme-daemon
2008-11-09 23:20 ` bugme-daemon
2008-11-09 23:45 ` bugme-daemon
2008-11-09 23:52 ` bugme-daemon
2008-11-10 0:10 ` bugme-daemon
2008-11-10 0:42 ` bugme-daemon
2008-11-13 21:17 ` bugme-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081109194742.E0F85108041@picon.linux-foundation.org \
--to=bugme-daemon@bugzilla.kernel.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox