From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Morton Subject: Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x Date: Fri, 19 Dec 2008 22:32:46 -0800 Message-ID: <20081219223246.b0aea84d.akpm@linux-foundation.org> References: <494A34CA.9030906@bigtelecom.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: Received: from smtp1.linux-foundation.org ([140.211.169.13]:33392 "EHLO smtp1.linux-foundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752157AbYLTGcy (ORCPT ); Sat, 20 Dec 2008 01:32:54 -0500 In-Reply-To: <494A34CA.9030906@bigtelecom.ru> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Badalian Vyacheslav Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org (cc linux-ide) On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav wrote: > Hello all. > After update from 2.6.26 to 2.6.27 all leds at drive bays now red. > SATA controller in AHCI mode. > Platform is Intel SR1530HSH > > Config attached. > > Any patches for test? Any ideas? Any other info needed? Or i must go to > bugtracker? ;) > > # lspci > 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller > 00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network > Connection (rev 02) > 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI > Controller #4 (rev 02) > 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI > Controller #5 (rev 02) > 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI > Controller #2 (rev 02) > 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express > Port 1 (rev 02) > 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express > Port 5 (rev 02) > 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI > Controller #1 (rev 02) > 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI > Controller #2 (rev 02) > 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI > Controller #3 (rev 02) > 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI > Controller #1 (rev 02) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) > 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface > Controller (rev 02) > 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 > port SATA AHCI Controller (rev 02) > 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller > (rev 02) > 02:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e > [Pilot] ServerEngines (SEP1) (rev 02) > 03:02.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet > Controller (rev 05) > > Thanks! >