From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Stephen Rothwell <sfr@canb.auug.org.au>,
linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [git pull] IDE fixes
Date: Mon, 19 Jan 2009 13:50:05 +0100 [thread overview]
Message-ID: <200901191350.06538.bzolnier@gmail.com> (raw)
Linus, please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/
to receive the following updates:
drivers/ide/falconide.c | 2 +-
drivers/ide/ide-probe.c | 3 ++-
drivers/ide/palm_bk3710.c | 11 +++++++----
3 files changed, 10 insertions(+), 6 deletions(-)
Andreas Schwab (1):
ide: fix IDE PMAC breakage
David Brownell (1):
drivers/ide/palm_bk3710.c buildfix
Michael Schmitz (1):
ide: fix Falcon IDE breakage
diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c
index a5ba820..a638e95 100644
--- a/drivers/ide/falconide.c
+++ b/drivers/ide/falconide.c
@@ -82,7 +82,7 @@ static const struct ide_tp_ops falconide_tp_ops = {
static const struct ide_port_info falconide_port_info = {
.tp_ops = &falconide_tp_ops,
- .host_flags = IDE_HFLAG_NO_DMA,
+ .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_SERIALIZE,
};
static void __init falconide_setup_ports(hw_regs_t *hw)
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 312127e..0db1ed9 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -649,7 +649,8 @@ static int ide_register_port(ide_hwif_t *hwif)
/* register with global device tree */
dev_set_name(&hwif->gendev, hwif->name);
hwif->gendev.driver_data = hwif;
- hwif->gendev.parent = hwif->dev;
+ if (hwif->gendev.parent == NULL)
+ hwif->gendev.parent = hwif->dev;
hwif->gendev.release = hwif_release_dev;
ret = device_register(&hwif->gendev);
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index a7ac490..f38aac7 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -346,7 +346,8 @@ static int __init palm_bk3710_probe(struct platform_device *pdev)
{
struct clk *clk;
struct resource *mem, *irq;
- unsigned long base, rate;
+ void __iomem *base;
+ unsigned long rate;
int i, rc;
hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
@@ -382,11 +383,13 @@ static int __init palm_bk3710_probe(struct platform_device *pdev)
base = IO_ADDRESS(mem->start);
/* Configure the Palm Chip controller */
- palm_bk3710_chipinit((void __iomem *)base);
+ palm_bk3710_chipinit(base);
for (i = 0; i < IDE_NR_PORTS - 2; i++)
- hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
- hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
+ hw.io_ports_array[i] = (unsigned long)
+ (base + IDE_PALM_ATA_PRI_REG_OFFSET + i);
+ hw.io_ports.ctl_addr = (unsigned long)
+ (base + IDE_PALM_ATA_PRI_CTL_OFFSET);
hw.irq = irq->start;
hw.dev = &pdev->dev;
hw.chipset = ide_palm3710;
\0
next reply other threads:[~2009-01-19 12:53 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-19 12:50 Bartlomiej Zolnierkiewicz [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-06-07 12:44 [git pull] IDE fixes Bartlomiej Zolnierkiewicz
2009-06-07 14:21 ` Alan Cox
2009-06-07 14:32 ` Bartlomiej Zolnierkiewicz
2009-06-07 14:40 ` Alan Cox
2009-06-07 15:03 ` Bartlomiej Zolnierkiewicz
2009-06-07 15:11 ` Alan Cox
2009-06-07 14:38 ` James Bottomley
2009-06-07 14:57 ` Bartlomiej Zolnierkiewicz
2009-06-07 15:18 ` James Bottomley
2009-06-07 15:44 ` Bartlomiej Zolnierkiewicz
2009-06-07 16:08 ` James Bottomley
2009-06-07 17:47 ` Bartlomiej Zolnierkiewicz
2009-06-07 19:08 ` James Bottomley
2009-06-07 19:23 ` Bartlomiej Zolnierkiewicz
2009-06-07 20:07 ` Alan Cox
2009-06-07 20:39 ` James Bottomley
2009-06-07 21:08 ` Bartlomiej Zolnierkiewicz
2009-06-07 20:42 ` Bartlomiej Zolnierkiewicz
2009-06-07 16:54 ` Pekka Enberg
2009-06-07 17:55 ` Bartlomiej Zolnierkiewicz
2009-06-07 18:21 ` Pekka Enberg
2009-06-07 19:00 ` Bartlomiej Zolnierkiewicz
2009-06-07 19:09 ` Pekka Enberg
2009-06-07 19:25 ` Bartlomiej Zolnierkiewicz
2009-06-07 23:15 ` Linus Torvalds
2009-06-07 23:47 ` Bartlomiej Zolnierkiewicz
2009-06-07 23:57 ` Linus Torvalds
2009-06-08 0:54 ` Bartlomiej Zolnierkiewicz
2009-06-07 23:14 ` Linus Torvalds
2009-06-07 23:12 ` Linus Torvalds
2009-05-22 15:17 Bartlomiej Zolnierkiewicz
2009-05-16 19:16 Bartlomiej Zolnierkiewicz
2009-05-16 19:22 ` Borislav Petkov
2009-05-16 19:33 ` Bartlomiej Zolnierkiewicz
2009-04-22 18:48 Bartlomiej Zolnierkiewicz
2009-04-22 19:06 ` Joe Perches
2009-04-22 19:22 ` Sam Ravnborg
2009-04-22 19:43 ` Bartlomiej Zolnierkiewicz
2009-04-22 19:55 ` Joe Perches
2009-04-22 21:41 ` Bartlomiej Zolnierkiewicz
2009-04-22 22:02 ` Ray Lee
2009-04-22 22:51 ` Bartlomiej Zolnierkiewicz
2009-04-22 22:58 ` Bartlomiej Zolnierkiewicz
2009-04-18 16:09 Bartlomiej Zolnierkiewicz
2009-03-13 20:49 Bartlomiej Zolnierkiewicz
2009-03-05 15:30 Bartlomiej Zolnierkiewicz
2009-03-05 16:27 ` Bartlomiej Zolnierkiewicz
2009-02-25 19:54 Bartlomiej Zolnierkiewicz
2009-02-02 19:48 Bartlomiej Zolnierkiewicz
2008-12-22 22:08 Bartlomiej Zolnierkiewicz
2008-12-08 16:55 Bartlomiej Zolnierkiewicz
2008-10-05 16:38 Bartlomiej Zolnierkiewicz
2008-09-27 17:47 Bartlomiej Zolnierkiewicz
2008-09-10 20:47 Bartlomiej Zolnierkiewicz
2008-09-02 18:24 Bartlomiej Zolnierkiewicz
2008-08-18 20:22 Bartlomiej Zolnierkiewicz
2008-07-08 17:38 Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200901191350.06538.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sfr@canb.auug.org.au \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).