Re: 2.6.29-rc2: thinkpad dock -- cdrom vs. s2ram

Re: 2.6.29-rc2: thinkpad dock -- cdrom vs. s2ram

[Rafael J. Wysocki]

On Monday 19 January 2009, Pavel Machek wrote:
> Hi!
> 
> In 2.6.29 (and probably earlier) kernels, booting in docking station
> results in undocked s2ram failing.
> 
> Problem seems to be that hda (cdrom in dock) is not deregistered
> during undock, and that hda driver loops spitting error messages at
> 'too-fast-to-read' rate when suspend with missing hda is attempted.

What driver do you mean exactly?  Old-IDE I would guess.

Does this also happen with a PATA/libata driver?

Rafael

Re: 2.6.29-rc2: thinkpad dock -- cdrom vs. s2ram

[Pavel Machek]

On Mon 2009-01-19 21:50:58, Rafael J. Wysocki wrote:
> On Monday 19 January 2009, Pavel Machek wrote:
> > Hi!
> > 
> > In 2.6.29 (and probably earlier) kernels, booting in docking station
> > results in undocked s2ram failing.
> > 
> > Problem seems to be that hda (cdrom in dock) is not deregistered
> > during undock, and that hda driver loops spitting error messages at
> > 'too-fast-to-read' rate when suspend with missing hda is attempted.
> 
> What driver do you mean exactly?  Old-IDE I would guess.

piix. hda, so I guess it is old-ide:

piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
pci 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1810-0x1817
Probing IDE interface ide0...
hda: UJDA765 DVD/CDRW, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing
all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20

If I try to access cdrom after undocking, I get:

hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
ide-cd: hda: weird block size 0
ide-cd: hda: default to 2kb block size
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted

...something similar scrolls when it hangs during s2ram, but it is too
fast to read.

> Does this also happen with a PATA/libata driver?

Will try...
									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: 2.6.29-rc2: thinkpad dock -- cdrom vs. s2ram

[Pavel Machek]

On Mon 2009-01-19 21:50:58, Rafael J. Wysocki wrote:
> On Monday 19 January 2009, Pavel Machek wrote:
> > Hi!
> > 
> > In 2.6.29 (and probably earlier) kernels, booting in docking station
> > results in undocked s2ram failing.
> > 
> > Problem seems to be that hda (cdrom in dock) is not deregistered
> > during undock, and that hda driver loops spitting error messages at
> > 'too-fast-to-read' rate when suspend with missing hda is attempted.
> 
> What driver do you mean exactly?  Old-IDE I would guess.
> 
> Does this also happen with a PATA/libata driver?

I guess I'm confused. I tried:

--- config.ok	2009-01-19 11:40:42.000000000 +0100
+++ ../b-linux/.config	2009-01-19 22:45:03.000000000 +0100
@@ -1022,7 +1022,7 @@
 # CONFIG_SATA_SIL24 is not set
 CONFIG_ATA_SFF=y
 CONFIG_SATA_SVW=y
-CONFIG_ATA_PIIX=y
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
 # CONFIG_SATA_NV is not set
 # CONFIG_PDC_ADMA is not set
@@ -1058,8 +1058,8 @@
 # CONFIG_PATA_JMICRON is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
+CONFIG_PATA_MPIIX=y
+CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_NETCELL is not set
 # CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set

...but cdrom is still detected as hda.
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: 2.6.29-rc2: thinkpad dock -- cdrom vs. s2ram

[Rafael J. Wysocki]

On Monday 19 January 2009, Pavel Machek wrote:
> On Mon 2009-01-19 21:50:58, Rafael J. Wysocki wrote:
> > On Monday 19 January 2009, Pavel Machek wrote:
> > > Hi!
> > > 
> > > In 2.6.29 (and probably earlier) kernels, booting in docking station
> > > results in undocked s2ram failing.
> > > 
> > > Problem seems to be that hda (cdrom in dock) is not deregistered
> > > during undock, and that hda driver loops spitting error messages at
> > > 'too-fast-to-read' rate when suspend with missing hda is attempted.
> > 
> > What driver do you mean exactly?  Old-IDE I would guess.
> > 
> > Does this also happen with a PATA/libata driver?
> 
> I guess I'm confused. I tried:
> 
> --- config.ok	2009-01-19 11:40:42.000000000 +0100
> +++ ../b-linux/.config	2009-01-19 22:45:03.000000000 +0100
> @@ -1022,7 +1022,7 @@
>  # CONFIG_SATA_SIL24 is not set
>  CONFIG_ATA_SFF=y
>  CONFIG_SATA_SVW=y
> -CONFIG_ATA_PIIX=y
> +# CONFIG_ATA_PIIX is not set
>  # CONFIG_SATA_MV is not set
>  # CONFIG_SATA_NV is not set
>  # CONFIG_PDC_ADMA is not set
> @@ -1058,8 +1058,8 @@
>  # CONFIG_PATA_JMICRON is not set
>  # CONFIG_PATA_TRIFLEX is not set
>  # CONFIG_PATA_MARVELL is not set
> -# CONFIG_PATA_MPIIX is not set
> -# CONFIG_PATA_OLDPIIX is not set
> +CONFIG_PATA_MPIIX=y
> +CONFIG_PATA_OLDPIIX=y
>  # CONFIG_PATA_NETCELL is not set
>  # CONFIG_PATA_NINJA32 is not set
>  # CONFIG_PATA_NS87410 is not set
> 
> ...but cdrom is still detected as hda.

Er, CONFIG_ATA_PIIX is a SATA driver.  I think you need to disable
CONFIG_BLK_DEV_PIIX and perhaps CONFIG_IDE_GENERIC too.

Rafael

Re: 2.6.29-rc2: thinkpad dock -- cdrom vs. s2ram

[Alan Cox]

> I guess I'm confused. I tried:

You want CONFIG_IDE = n, CONFIG_ATA_SFF = y, CONFIG_ATA_PIIX = y

Alan

Re: 2.6.29-rc2: thinkpad dock -- cdrom vs. s2ram

[Sergei Shtylyov]

Hello.

Rafael J. Wysocki wrote:

>>>> In 2.6.29 (and probably earlier) kernels, booting in docking station
>>>> results in undocked s2ram failing.
>>>>
>>>> Problem seems to be that hda (cdrom in dock) is not deregistered
>>>> during undock, and that hda driver loops spitting error messages at
>>>> 'too-fast-to-read' rate when suspend with missing hda is attempted.
>>>>         
>>> What driver do you mean exactly?  Old-IDE I would guess.
>>>
>>> Does this also happen with a PATA/libata driver?
>>>       
>> I guess I'm confused. I tried:
>>
>> --- config.ok	2009-01-19 11:40:42.000000000 +0100
>> +++ ../b-linux/.config	2009-01-19 22:45:03.000000000 +0100
>> @@ -1022,7 +1022,7 @@
>>  # CONFIG_SATA_SIL24 is not set
>>  CONFIG_ATA_SFF=y
>>  CONFIG_SATA_SVW=y
>> -CONFIG_ATA_PIIX=y
>> +# CONFIG_ATA_PIIX is not set
>>  # CONFIG_SATA_MV is not set
>>  # CONFIG_SATA_NV is not set
>>  # CONFIG_PDC_ADMA is not set
>> @@ -1058,8 +1058,8 @@
>>  # CONFIG_PATA_JMICRON is not set
>>  # CONFIG_PATA_TRIFLEX is not set
>>  # CONFIG_PATA_MARVELL is not set
>> -# CONFIG_PATA_MPIIX is not set
>> -# CONFIG_PATA_OLDPIIX is not set
>> +CONFIG_PATA_MPIIX=y
>> +CONFIG_PATA_OLDPIIX=y
>>  # CONFIG_PATA_NETCELL is not set
>>  # CONFIG_PATA_NINJA32 is not set
>>  # CONFIG_PATA_NS87410 is not set
>>
>> ...but cdrom is still detected as hda.
>>     
>
> Er, CONFIG_ATA_PIIX is a SATA driver.

   Not really, it drives both SATA and PATA controllers.

MBR, Sergei

Re: 2.6.29-rc2: thinkpad dock -- cdrom vs. s2ram

[Pavel Machek]

On Tue 2009-01-20 00:03:05, Alan Cox wrote:
> > I guess I'm confused. I tried:
> 
> You want CONFIG_IDE = n, CONFIG_ATA_SFF = y, CONFIG_ATA_PIIX = y

Thanks.

With those options, cdrom moved from hda to sr0, and is correctly
unregistered when undocking. Unfortunately, it is not correctly
re-registered when I insert machine back into the dock :-(... so
something is still not right in docking area.

							Pavel

coda: Unexpected interruption.
Failure of coda_cnode_make for root: error -4
ata5.00: disabled
ata5.00: detaching (SCSI 4:0:0:0)
sr 4:0:0:0: rejecting I/O to dead device
sr 4:0:0:0: rejecting I/O to dead device
ACPI: \_SB_.GDCK - undocking
usb usb1: usb resume
ehci_hcd 0000:00:1d.7: resume root hub
hub 1-0:1.0: hub_resume
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001002 POWER sig=se0
CSC
hub 1-0:1.0: port 6: status 0100 change 0001
hub 1-0:1.0: state 7 ports 8 chg 0040 evt fe00
hub 1-0:1.0: port 6, status 0100, change 0000, 12 Mb/s
usb 1-6: USB disconnect, address 2
usb 1-6: unregistering device
usb 1-6: usb_disable_device nuking all URBs
usb 1-6: unregistering interface 1-6:1.0
usb 1-6:1.0: uevent
usb 1-6: uevent
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:1d.7: suspend root hub
usb usb1: usb resume
ehci_hcd 0000:00:1d.7: resume root hub
hub 1-0:1.0: hub_resume
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC
CONNECT
hub 1-0:1.0: port 6: status 0501 change 0001
hub 1-0:1.0: state 7 ports 8 chg 0040 evt fe00
hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.7: port 6 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001005 POWER sig=se0 PE
CONNECT
usb 1-6: new high speed USB device using ehci_hcd and address 5
ehci_hcd 0000:00:1d.7: port 6 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001005 POWER sig=se0 PE
CONNECT
usb 1-6: New USB device found, idVendor=17ef, idProduct=1000
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-6: uevent
usb 1-6: usb_probe_device
usb 1-6: configuration #1 chosen from 1 choice
usb 1-6: adding 1-6:1.0 (config #1, interface 0)
usb 1-6:1.0: uevent
hub 1-6:1.0: usb_probe_interface
hub 1-6:1.0: usb_probe_interface - got id
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
hub 1-6:1.0: standalone hub
hub 1-6:1.0: individual port power switching
hub 1-6:1.0: individual port over-current protection
hub 1-6:1.0: TT per port
hub 1-6:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-6:1.0: power on to power good time: 100ms
hub 1-6:1.0: local power source is good
hub 1-6:1.0: enabling power on all ports
/data/l/linux/drivers/usb/core/inode.c: creating file '005'
usb 1-6: link qh256-0001/f6238080 start 255 [1/0 us]
hub 1-6:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-6:1.0: hub_suspend
usb 1-6: unlink qh256-0001/f6238080 start 255 [1/0 us]
usb 1-6: usb auto-suspend
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:1d.7: suspend root hub

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: 2.6.29-rc2: thinkpad dock -- cdrom vs. s2ram

[Holger Macht]

Am Dienstag, den 20.01.2009, 13:47 +0100 schrieb Pavel Machek:
> On Tue 2009-01-20 00:03:05, Alan Cox wrote:
> > > I guess I'm confused. I tried:
> > 
> > You want CONFIG_IDE = n, CONFIG_ATA_SFF = y, CONFIG_ATA_PIIX = y
> 
> Thanks.
> 
> With those options, cdrom moved from hda to sr0, and is correctly
> unregistered when undocking. Unfortunately, it is not correctly
> re-registered when I insert machine back into the dock :-(... so
> something is still not right in docking area.

Does this work when you try without the dock station, just removing and
inserting the cdrom?

Regards,
	Holger

Re: 2.6.29-rc2: thinkpad dock -- cdrom vs. s2ram

[Rafael J. Wysocki]

On Tuesday 20 January 2009, Sergei Shtylyov wrote:
> Hello.
> 
> Rafael J. Wysocki wrote:
> 
> >>>> In 2.6.29 (and probably earlier) kernels, booting in docking station
> >>>> results in undocked s2ram failing.
> >>>>
> >>>> Problem seems to be that hda (cdrom in dock) is not deregistered
> >>>> during undock, and that hda driver loops spitting error messages at
> >>>> 'too-fast-to-read' rate when suspend with missing hda is attempted.
> >>>>         
> >>> What driver do you mean exactly?  Old-IDE I would guess.
> >>>
> >>> Does this also happen with a PATA/libata driver?
> >>>       
> >> I guess I'm confused. I tried:
> >>
> >> --- config.ok	2009-01-19 11:40:42.000000000 +0100
> >> +++ ../b-linux/.config	2009-01-19 22:45:03.000000000 +0100
> >> @@ -1022,7 +1022,7 @@
> >>  # CONFIG_SATA_SIL24 is not set
> >>  CONFIG_ATA_SFF=y
> >>  CONFIG_SATA_SVW=y
> >> -CONFIG_ATA_PIIX=y
> >> +# CONFIG_ATA_PIIX is not set
> >>  # CONFIG_SATA_MV is not set
> >>  # CONFIG_SATA_NV is not set
> >>  # CONFIG_PDC_ADMA is not set
> >> @@ -1058,8 +1058,8 @@
> >>  # CONFIG_PATA_JMICRON is not set
> >>  # CONFIG_PATA_TRIFLEX is not set
> >>  # CONFIG_PATA_MARVELL is not set
> >> -# CONFIG_PATA_MPIIX is not set
> >> -# CONFIG_PATA_OLDPIIX is not set
> >> +CONFIG_PATA_MPIIX=y
> >> +CONFIG_PATA_OLDPIIX=y
> >>  # CONFIG_PATA_NETCELL is not set
> >>  # CONFIG_PATA_NINJA32 is not set
> >>  # CONFIG_PATA_NS87410 is not set
> >>
> >> ...but cdrom is still detected as hda.
> >>     
> >
> > Er, CONFIG_ATA_PIIX is a SATA driver.
> 
>    Not really, it drives both SATA and PATA controllers.

What I wanted to say it's not old-IDE.

Thanks,
Rafael