From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: "Daniel K." <daniel@cluded.net>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 02/15] scc_pata: remove DECLARE_SCC_DEV() macro
Date: Mon, 2 Feb 2009 19:26:44 +0100 [thread overview]
Message-ID: <200902021926.44921.bzolnier@gmail.com> (raw)
In-Reply-To: <49872324.9070908@cluded.net>
On Monday 02 February 2009, Daniel K. wrote:
> Bartlomiej Zolnierkiewicz wrote:
> > Index: b/drivers/ide/scc_pata.c
> > ===================================================================
> > --- a/drivers/ide/scc_pata.c
> > +++ b/drivers/ide/scc_pata.c
> > @@ -882,21 +882,16 @@ static const struct ide_dma_ops scc_dma_
> > .dma_sff_read_status = scc_dma_sff_read_status,
> > };
> >
> > -#define DECLARE_SCC_DEV(name_str) \
> > - { \
> > - .name = name_str, \
> > - .init_iops = init_iops_scc, \
> > - .init_dma = scc_init_dma, \
> > - .init_hwif = init_hwif_scc, \
> > - .tp_ops = &scc_tp_ops, \
> > - .port_ops = &scc_port_ops, \
> > - .dma_ops = &scc_dma_ops, \
> > - .host_flags = IDE_HFLAG_SINGLE, \
> > - .pio_mask = ATA_PIO4, \
> > - }
> > -
> > static const struct ide_port_info scc_chipsets[] __devinitdata = {
> > - /* 0 */ DECLARE_SCC_DEV("sccIDE"),
> > + .name = "sccIDE",
> > + .init_iops = init_iops_scc,
> > + .init_dma = scc_init_dma,
> > + .init_hwif = init_hwif_scc,
> > + .tp_ops = &scc_tp_ops,
> > + .port_ops = &scc_port_ops,
> > + .dma_ops = &scc_dma_ops,
> > + .host_flags = IDE_HFLAG_SINGLE,
> > + .pio_mask = ATA_PIO4,
> > };
> >
> > /**
>
> You're a few braces short here, aren't you?
Good catch, thanks!
> The braces in the #define, didn't get carried over in the change.
Actually we may simplify the whole thing while at it.
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] scc_pata: remove DECLARE_SCC_DEV() macro (v2)
v2:
scc_chipsets[] -> scc_chipset fix (spotted by Daniel K.).
Cc: "Daniel K." <daniel@cluded.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/scc_pata.c | 27 +++++++++++----------------
1 file changed, 11 insertions(+), 16 deletions(-)
Index: b/drivers/ide/scc_pata.c
===================================================================
--- a/drivers/ide/scc_pata.c
+++ b/drivers/ide/scc_pata.c
@@ -882,21 +882,16 @@ static const struct ide_dma_ops scc_dma_
.dma_sff_read_status = scc_dma_sff_read_status,
};
-#define DECLARE_SCC_DEV(name_str) \
- { \
- .name = name_str, \
- .init_iops = init_iops_scc, \
- .init_dma = scc_init_dma, \
- .init_hwif = init_hwif_scc, \
- .tp_ops = &scc_tp_ops, \
- .port_ops = &scc_port_ops, \
- .dma_ops = &scc_dma_ops, \
- .host_flags = IDE_HFLAG_SINGLE, \
- .pio_mask = ATA_PIO4, \
- }
-
-static const struct ide_port_info scc_chipsets[] __devinitdata = {
- /* 0 */ DECLARE_SCC_DEV("sccIDE"),
+static const struct ide_port_info scc_chipset __devinitdata = {
+ .name = "sccIDE",
+ .init_iops = init_iops_scc,
+ .init_dma = scc_init_dma,
+ .init_hwif = init_hwif_scc,
+ .tp_ops = &scc_tp_ops,
+ .port_ops = &scc_port_ops,
+ .dma_ops = &scc_dma_ops,
+ .host_flags = IDE_HFLAG_SINGLE,
+ .pio_mask = ATA_PIO4,
};
/**
@@ -910,7 +905,7 @@ static const struct ide_port_info scc_ch
static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- return init_setup_scc(dev, &scc_chipsets[id->driver_data]);
+ return init_setup_scc(dev, &scc_chipset);
}
/**
next prev parent reply other threads:[~2009-02-02 18:36 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-01 17:49 [PATCH 00/15] weekly IDE updates Bartlomiej Zolnierkiewicz
2009-02-01 17:49 ` [PATCH 01/15] ide: include <asm/ide.h> only when needed Bartlomiej Zolnierkiewicz
2009-02-02 7:49 ` Geert Uytterhoeven
2009-02-02 18:27 ` Bartlomiej Zolnierkiewicz
2009-02-04 14:20 ` Atsushi Nemoto
2009-02-05 21:14 ` Bartlomiej Zolnierkiewicz
2009-02-05 23:58 ` Sergei Shtylyov
2009-02-06 16:21 ` Bartlomiej Zolnierkiewicz
2009-02-06 22:03 ` Sergei Shtylyov
2009-02-07 15:35 ` Atsushi Nemoto
2009-02-07 23:37 ` Sergei Shtylyov
2009-02-02 18:53 ` Jaswinder Singh Rajput
2009-02-01 17:49 ` [PATCH 02/15] scc_pata: remove DECLARE_SCC_DEV() macro Bartlomiej Zolnierkiewicz
2009-02-01 18:49 ` Sergei Shtylyov
2009-02-02 16:45 ` Daniel K.
2009-02-02 18:26 ` Bartlomiej Zolnierkiewicz [this message]
2009-02-01 17:49 ` [PATCH 03/15] ide: fix memleak on failure in probe_for_drive() Bartlomiej Zolnierkiewicz
2009-02-01 17:49 ` [PATCH 04/15] ide: fix error message in pre_task_out_intr() Bartlomiej Zolnierkiewicz
2009-02-01 17:49 ` [PATCH 05/15] ide: allow host drivers to specify IRQ flags Bartlomiej Zolnierkiewicz
2009-02-01 17:49 ` [PATCH 06/15] ide: remove now superfluous check from ide_host_register() Bartlomiej Zolnierkiewicz
2009-02-01 17:49 ` [PATCH 07/15] ide: add IDE_HFLAG_DTC2278 host flag Bartlomiej Zolnierkiewicz
2009-02-01 17:50 ` [PATCH 08/15] ide: add IDE_HFLAG_4DRIVES " Bartlomiej Zolnierkiewicz
2009-02-01 17:50 ` [PATCH 09/15] ide: add "flagged" taskfile flags to struct ide_taskfile Bartlomiej Zolnierkiewicz
2009-02-06 6:04 ` Stephen Rothwell
2009-02-08 11:38 ` Bartlomiej Zolnierkiewicz
2009-03-04 18:32 ` Sergei Shtylyov
2009-02-01 17:50 ` [PATCH 10/15] ide: complete power step in ide_complete_pm_request() Bartlomiej Zolnierkiewicz
2009-02-01 17:50 ` [PATCH 11/15] ide: factor out completion of taskfile from ide_end_drive_cmd() Bartlomiej Zolnierkiewicz
2009-02-01 17:50 ` [PATCH 12/15] ide: move request type specific code from ide_end_drive_cmd() to callers Bartlomiej Zolnierkiewicz
2009-02-01 17:50 ` [PATCH 13/15] ide: no need to read Status and Error registers for "empty" taskfile requests Bartlomiej Zolnierkiewicz
2009-02-01 17:50 ` [PATCH 14/15] ide: remove ->data_phase field from ide_hwif_t Bartlomiej Zolnierkiewicz
2009-02-01 17:50 ` [PATCH 15/15] ide: move smart_enable() call out from get_smart_data() Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200902021926.44921.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=daniel@cluded.net \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).