linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Borislav Petkov <petkovbb@gmail.com>,
	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 11/20] ide-cd: unify cdrom_newpc_intr() exit paths
Date: Mon, 16 Feb 2009 01:14:22 +0100	[thread overview]
Message-ID: <20090216001422.27491.17281.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20090216001309.27491.59759.sendpatchset@localhost.localdomain>

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] ide-cd: unify cdrom_newpc_intr() exit paths

* Move cdrom_end_request() calls from cdrom_decode_status()
  and ide_cd_check_ireason() to cdrom_newpc_intr().

* Unify cdrom_newpc_intr() exit paths.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-cd.c |   48 +++++++++++++++++++++++-------------------------
 1 file changed, 23 insertions(+), 25 deletions(-)

Index: b/drivers/ide/ide-cd.c
===================================================================
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -291,7 +291,8 @@ static void cdrom_end_request(ide_drive_
 /*
  * Returns:
  * 0: if the request should be continued.
- * 1: if the request was ended.
+ * 1: if the request will be going through error recovery.
+ * 2: if the request should be ended.
  */
 static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
 {
@@ -324,10 +325,7 @@ static int cdrom_decode_status(ide_drive
 		 * Just give up.
 		 */
 		rq->cmd_flags |= REQ_FAILED;
-		cdrom_end_request(drive, 0);
-		ide_error(drive, "request sense failure", stat);
-		return 1;
-
+		return 2;
 	} else if (blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) {
 		/* All other functions, except for READ. */
 
@@ -467,14 +465,12 @@ static int cdrom_decode_status(ide_drive
 		 */
 		if (stat & ATA_ERR)
 			cdrom_queue_request_sense(drive, NULL, NULL);
+		return 1;
 	} else {
 		blk_dump_rq_flags(rq, PFX "bad rq");
-		cdrom_end_request(drive, 0);
+		return 2;
 	}
 
-	/* retry, or handle the next request */
-	return 1;
-
 end_request:
 	if (stat & ATA_ERR) {
 		struct request_queue *q = drive->queue;
@@ -487,10 +483,9 @@ end_request:
 		hwif->rq = NULL;
 
 		cdrom_queue_request_sense(drive, rq->sense, rq);
+		return 1;
 	} else
-		cdrom_end_request(drive, 0);
-
-	return 1;
+		return 2;
 }
 
 /*
@@ -534,7 +529,6 @@ static int ide_cd_check_ireason(ide_driv
 	if (rq->cmd_type == REQ_TYPE_ATA_PC)
 		rq->cmd_flags |= REQ_FAILED;
 
-	cdrom_end_request(drive, 0);
 	return -1;
 }
 
@@ -736,7 +730,8 @@ static ide_startstop_t cdrom_newpc_intr(
 	xfer_func_t *xferfunc;
 	ide_expiry_t *expiry = NULL;
 	int dma_error = 0, dma, stat, thislen, uptodate = 0;
-	int write = (rq_data_dir(rq) == WRITE) ? 1 : 0;
+	int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc;
+	int sense = blk_sense_request(rq);
 	unsigned int timeout;
 	u16 len;
 	u8 ireason;
@@ -756,8 +751,12 @@ static ide_startstop_t cdrom_newpc_intr(
 		}
 	}
 
-	if (cdrom_decode_status(drive, 0, &stat))
+	rc = cdrom_decode_status(drive, 0, &stat);
+	if (rc) {
+		if (rc == 2)
+			goto out_end;
 		return ide_stopped;
+	}
 
 	/* using dma, transfer is complete now */
 	if (dma) {
@@ -802,8 +801,6 @@ static ide_startstop_t cdrom_newpc_intr(
 					rq->cmd_flags |= REQ_FAILED;
 				uptodate = 0;
 			}
-			cdrom_end_request(drive, uptodate);
-			return ide_stopped;
 		} else if (!blk_pc_request(rq)) {
 			ide_cd_request_sense_fixup(drive, rq);
 			/* complain if we still have data left to transfer */
@@ -815,17 +812,16 @@ static ide_startstop_t cdrom_newpc_intr(
 	}
 
 	/* check which way to transfer data */
-	if (ide_cd_check_ireason(drive, rq, len, ireason, write))
-		return ide_stopped;
+	rc = ide_cd_check_ireason(drive, rq, len, ireason, write);
+	if (rc)
+		goto out_end;
 
 	if (blk_fs_request(rq)) {
 		if (write == 0) {
 			int nskip;
 
-			if (ide_cd_check_transfer_size(drive, len)) {
-				cdrom_end_request(drive, 0);
-				return ide_stopped;
-			}
+			if (ide_cd_check_transfer_size(drive, len))
+				goto out_end;
 
 			/*
 			 * First, figure out if we need to bit-bucket
@@ -918,7 +914,7 @@ static ide_startstop_t cdrom_newpc_intr(
 			else
 				rq->data += blen;
 		}
-		if (!write && blk_sense_request(rq))
+		if (sense && write == 0)
 			rq->sense_len += blen;
 	}
 
@@ -939,7 +935,7 @@ static ide_startstop_t cdrom_newpc_intr(
 	return ide_started;
 
 out_end:
-	if (blk_pc_request(rq)) {
+	if (blk_pc_request(rq) && rc == 0) {
 		unsigned int dlen = rq->data_len;
 
 		if (dma)
@@ -951,6 +947,8 @@ out_end:
 		hwif->rq = NULL;
 	} else {
 		cdrom_end_request(drive, uptodate);
+		if (sense && rc == 2)
+			ide_error(drive, "request sense failure", stat);
 	}
 	return ide_stopped;
 }

  parent reply	other threads:[~2009-02-16  0:12 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-16  0:13 [PATCH 00/20] ide-cd: use scatterlists also for PIO transfers Bartlomiej Zolnierkiewicz
2009-02-16  0:13 ` [PATCH 01/20] ide: add support for arbitrary transfer lengths to ide_pio_bytes() Bartlomiej Zolnierkiewicz
2009-02-16  0:13 ` [PATCH 02/20] ide: use PageHighMem() instead of ifdefs in ide_pio_bytes() Bartlomiej Zolnierkiewicz
2009-02-16  0:13 ` [PATCH 03/20] ide-cd: remove dead URLs Bartlomiej Zolnierkiewicz
2009-02-16  0:13 ` [PATCH 04/20] ide-cd: use ide_end_rq() also for failed non-fs requests Bartlomiej Zolnierkiewicz
2009-02-16  0:13 ` [PATCH 05/20] ide-cd: remove dead code from cdrom_decode_status() Bartlomiej Zolnierkiewicz
2009-02-16  0:13 ` [PATCH 06/20] ide: remove needless ide_dump_status_no_sense() wrapper Bartlomiej Zolnierkiewicz
2009-02-16  0:13 ` [PATCH 07/20] ide-cd: remove no longer needed 'ignore' module parameter Bartlomiej Zolnierkiewicz
2009-02-16  0:14 ` [PATCH 08/20] ide-cd: factor out failed request completion from cdrom_end_request() Bartlomiej Zolnierkiewicz
2009-02-16  0:14 ` [PATCH 09/20] ide-cd: unify ide_cd_do_request() exit paths Bartlomiej Zolnierkiewicz
2009-02-16  0:14 ` [PATCH 10/20] ide-cd: move setting REQ_FAILED flag out from 'end_request' exit path Bartlomiej Zolnierkiewicz
2009-02-16  0:14 ` Bartlomiej Zolnierkiewicz [this message]
2009-02-16  9:25   ` [PATCH 11/20] ide-cd: unify cdrom_newpc_intr() exit paths Borislav Petkov
2009-02-16 21:09     ` Bartlomiej Zolnierkiewicz
2009-02-16  0:14 ` [PATCH 12/20] ide-cd: remove cdrom_end_request() Bartlomiej Zolnierkiewicz
2009-02-16  0:14 ` [PATCH 13/20] ide-cd: kill whole failed request in ide_cd_do_request() Bartlomiej Zolnierkiewicz
2009-02-16  0:14 ` [PATCH 14/20] ide-cd: cleanup ide_cd_do_request() Bartlomiej Zolnierkiewicz
2009-02-16  0:14 ` [PATCH 15/20] ide-cd: use scatterlists for PIO transfers (fs requests) Bartlomiej Zolnierkiewicz
2009-02-16  0:14 ` [PATCH 16/20] ide-cd: fix non-SECTOR_SIZE-multiples PIO transfers for fs requests Bartlomiej Zolnierkiewicz
2009-02-16  0:15 ` [PATCH 17/20] ide-cd: merge ide_cd_prepare_rw_request() into cdrom_start_rw() Bartlomiej Zolnierkiewicz
2009-02-16  0:15 ` [PATCH 18/20] ide-cd: use scatterlists for PIO transfers (non-fs requests) Bartlomiej Zolnierkiewicz
2009-02-16  0:15 ` [PATCH 19/20] ide-cd: use common completion path for DMA requests in cdrom_newpc_intr() Bartlomiej Zolnierkiewicz
2009-02-16  0:15 ` [PATCH 20/20] ide-cd: unify transfer padding " Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090216001422.27491.17281.sendpatchset@localhost.localdomain \
    --to=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=petkovbb@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).