[GIT PATCH pata-2.6] ide: clean up ide-tape, take#2

[GIT PATCH pata-2.6] ide: clean up ide-tape, take#2

[Tejun Heo]

Hello, Bartlomiej, Jens, Borislav.

Upon ack, please pull from the following git tree.

  git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git ide-phase2

This is the second take of clean-up-ide-tape patchset.  Please read
the head message on the last take[L] for general description.

Changes from the last take are

* Tested with Seagate STT8000A rev 5.44 and various fixes bugs
  including a few already existing ones.

* 0003 and 0004 of the last take are merged into one.  The first one
  converted data carrier to bio and the second changed data transfer
  mechanism accordingly.  As blk_rq_map_kern() can produce scatter IO
  the first one without the second didn't work.

* Rebased.

This patchset contains the following ten patches.

 0001-ide-tape-floppy-fix-failed-command-completion-after.patch
 0002-ide-atapi-tape-floppy-allow-pc_callback-to-chan.patch
 0003-ide-tape-use-single-continuous-buffer.patch
 0004-ide-tape-use-standard-data-transfer-mechanism.patch
 0005-ide-tape-kill-idetape_bh.patch
 0006-ide-tape-unify-r-w-init-paths.patch
 0007-ide-tape-use-byte-size-instead-of-sectors-on-rw-iss.patch
 0008-ide-tape-simplify-read-write-functions.patch
 0009-ide-atapi-kill-unused-fields-and-callbacks.patch
 0010-ide-drop-rq-data-handling-from-ide_map_sg.patch

and is on top of

  linux-pata-2.6#for-next (15da90b516e9da92cc1d90001e640fd6707d0e27)
+ [1] ide-rq-buffer-data-special-cleanups patchset, take#2

and contains the following changes.

 drivers/ide/ide-atapi.c  |   29 -
 drivers/ide/ide-floppy.c |    4 
 drivers/ide/ide-io.c     |    6 
 drivers/ide/ide-tape.c   |  722 ++++++++++-------------------------------------
 include/linux/ide.h      |   12 
 5 files changed, 170 insertions(+), 603 deletions(-)

Thanks.

--
tejun

[L] http://thread.gmane.org/gmane.linux.ide/39316
[1] http://thread.gmane.org/gmane.linux.ide/39930

[PATCH 01/10] ide-tape,floppy: fix failed command completion after request sense

[Tejun Heo]

Impact: fix infinite retry loop

After a command failed, ide-tape and floppy inserts REQUEST_SENSE in
front of the failed command and according to the result, sets
pc->retries, flags and errors.  After REQUEST_SENSE is complete, the
failed command is again at the front of the queue and if the verdict
was to terminate the request, the issue functions tries to complete it
directly by calling drive->pc_callback() and returning ide_stopped.

However, drive->pc_callback() doesn't complete a request.  It only
prepares for completion of the request.  As a result, this creates an
infinite loop where the failed request is retried perpetually.

Fix it by actually ending the request by calling ide_complete_rq().

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/ide/ide-floppy.c |    1 +
 drivers/ide/ide-tape.c   |    1 +
 2 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index d3302cc..d20704a 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -141,6 +141,7 @@ static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive,
 
 		drive->failed_pc = NULL;
 		drive->pc_callback(drive, 0);
+		ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq));
 		return ide_stopped;
 	}
 
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 9b762a2..2b9a136 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -643,6 +643,7 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
 		}
 		drive->failed_pc = NULL;
 		drive->pc_callback(drive, 0);
+		ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq));
 		return ide_stopped;
 	}
 	debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
-- 
1.6.0.2

[PATCH 02/10] ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len

[Tejun Heo]

Impact: allow residual count implementation in ->pc_callback()

rq->data_len has two duties - carrying the number of input bytes on
issue and carrying residual count back to the issuer on completion.
ide-atapi completion callback ->pc_callback() is the right place to do
this but currently ide-atapi depends on rq->data_len carrying the
original request size after calling ->pc_callback() to complete the pc
request.

This patch makes ide_pc_intr(), ide_tape_issue_pc() and
ide_floppy_issue_pc() cache length to complete before calling
->pc_callback() so that it can modify rq->data_len as necessary.

Note: As using rq->data_len for two purposes can make cases like this
      incorrect in subtle ways, future changes will introduce separate
      field for residual count.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
---
 drivers/ide/ide-atapi.c  |   16 ++++++++++------
 drivers/ide/ide-floppy.c |    5 ++++-
 drivers/ide/ide-tape.c   |    5 ++++-
 3 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 5cefe12..3df5442 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -409,6 +409,16 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 		if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0)
 			dsc = 1;
 
+		/*
+		 * ->pc_callback() might change rq->data_len for
+		 * residual count, cache total length.
+		 */
+		if (!blk_special_request(rq) &&
+		    (drive->media == ide_tape && !rq->bio))
+			done = ide_rq_bytes(rq);        /* FIXME */
+		else
+			done = blk_rq_bytes(rq);
+
 		/* Command finished - Call the callback function */
 		uptodate = drive->pc_callback(drive, dsc);
 
@@ -417,7 +427,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 
 		if (blk_special_request(rq)) {
 			rq->errors = 0;
-			done = blk_rq_bytes(rq);
 			error = 0;
 		} else {
 
@@ -426,11 +435,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 					rq->errors = -EIO;
 			}
 
-			if (drive->media == ide_tape && !rq->bio)
-				done = ide_rq_bytes(rq); /* FIXME */
-			else
-				done = blk_rq_bytes(rq);
-
 			error = uptodate ? 0 : -EIO;
 		}
 
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index d20704a..537b7c5 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -134,14 +134,17 @@ static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive,
 	drive->pc = pc;
 
 	if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
+		unsigned int done = blk_rq_bytes(drive->hwif->rq);
+
 		if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
 			ide_floppy_report_error(floppy, pc);
+
 		/* Giving up */
 		pc->error = IDE_DRV_ERROR_GENERAL;
 
 		drive->failed_pc = NULL;
 		drive->pc_callback(drive, 0);
-		ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq));
+		ide_complete_rq(drive, -EIO, done);
 		return ide_stopped;
 	}
 
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 2b9a136..8226d52 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -622,6 +622,8 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
 
 	if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
 		(pc->flags & PC_FLAG_ABORT)) {
+		unsigned int done = blk_rq_bytes(drive->hwif->rq);
+
 		/*
 		 * We will "abort" retrying a packet command in case legitimate
 		 * error code was received (crossing a filemark, or end of the
@@ -641,9 +643,10 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
 			/* Giving up */
 			pc->error = IDE_DRV_ERROR_GENERAL;
 		}
+
 		drive->failed_pc = NULL;
 		drive->pc_callback(drive, 0);
-		ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq));
+		ide_complete_rq(drive, -EIO, done);
 		return ide_stopped;
 	}
 	debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
-- 
1.6.0.2

[PATCH 03/10] ide-tape: use single continuous buffer

[Tejun Heo]

Impact: simpler buffer allocation and handling, kills OOM, fix DMA transfers

ide-tape has its own multiple buffer mechanism using struct
idetape_bh.  It allocates buffer with decreasing order-of-two
allocations so that it results in minimum number of segments.
However, the implementation is quite complex and works in a way that
no other block or ide driver works necessitating a lot of special case
handling.

The benefit this complex allocation scheme brings is questionable as
PIO or DMA the number of segments (16 maximum) doesn't make any
noticeable difference and it also doesn't negate the need for multiple
order allocation which can fail under memory pressure or high
fragmentation although it does lower the highest order necessary by
one when the buffer size isn't power of two.

As the first step to remove the custom buffer management, this patch
makes ide-tape allocate single continous buffer.  The maximum order is
four.  I doubt the change would cause any trouble but if it ever
matters, it should be converted to regular sg mechanism like everyone
else and even in that case dropping custom buffer handling and moving
to standard mechanism first make sense as an intermediate step.

This patch makes the first bh to contain the whole buffer and drops
multi bh handling code.  Following patches will make further changes.

This patch has the side effect of killing OOM triggered by allocation
path and fixing DMA transfers.  Previously, bug in alloc path
triggered OOM on command issue and commands were passed to DMA engine
without DMA-mapping all the segments.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/ide/ide-tape.c |  258 +++++++++++-------------------------------------
 1 files changed, 59 insertions(+), 199 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 8226d52..b2afbc7 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -134,7 +134,6 @@ enum {
 struct idetape_bh {
 	u32 b_size;
 	atomic_t b_count;
-	struct idetape_bh *b_reqnext;
 	char *b_data;
 };
 
@@ -228,10 +227,6 @@ typedef struct ide_tape_obj {
 	char *b_data;
 	int b_count;
 
-	int pages_per_buffer;
-	/* Wasted space in each stage */
-	int excess_bh_size;
-
 	/* Measures average tape speed */
 	unsigned long avg_time;
 	int avg_size;
@@ -303,9 +298,7 @@ static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	struct idetape_bh *bh = pc->bh;
 	int count;
 
-	while (bcount) {
-		if (bh == NULL)
-			break;
+	if (bcount && bh) {
 		count = min(
 			(unsigned int)(bh->b_size - atomic_read(&bh->b_count)),
 			bcount);
@@ -313,15 +306,10 @@ static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
 					atomic_read(&bh->b_count), count);
 		bcount -= count;
 		atomic_add(count, &bh->b_count);
-		if (atomic_read(&bh->b_count) == bh->b_size) {
-			bh = bh->b_reqnext;
-			if (bh)
-				atomic_set(&bh->b_count, 0);
-		}
+		if (atomic_read(&bh->b_count) == bh->b_size)
+			pc->bh = NULL;
 	}
 
-	pc->bh = bh;
-
 	return bcount;
 }
 
@@ -331,22 +319,14 @@ static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	struct idetape_bh *bh = pc->bh;
 	int count;
 
-	while (bcount) {
-		if (bh == NULL)
-			break;
+	if (bcount && bh) {
 		count = min((unsigned int)pc->b_count, (unsigned int)bcount);
 		drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count);
 		bcount -= count;
 		pc->b_data += count;
 		pc->b_count -= count;
-		if (!pc->b_count) {
-			bh = bh->b_reqnext;
-			pc->bh = bh;
-			if (bh) {
-				pc->b_data = bh->b_data;
-				pc->b_count = atomic_read(&bh->b_count);
-			}
-		}
+		if (!pc->b_count)
+			pc->bh = NULL;
 	}
 
 	return bcount;
@@ -355,24 +335,20 @@ static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
 static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc)
 {
 	struct idetape_bh *bh = pc->bh;
-	int count;
 	unsigned int bcount = pc->xferred;
 
 	if (pc->flags & PC_FLAG_WRITING)
 		return;
-	while (bcount) {
-		if (bh == NULL) {
+	if (bcount) {
+		if (bh == NULL || bcount > bh->b_size) {
 			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
 					__func__);
 			return;
 		}
-		count = min((unsigned int)bh->b_size, (unsigned int)bcount);
-		atomic_set(&bh->b_count, count);
+		atomic_set(&bh->b_count, bcount);
 		if (atomic_read(&bh->b_count) == bh->b_size)
-			bh = bh->b_reqnext;
-		bcount -= count;
+			pc->bh = NULL;
 	}
-	pc->bh = bh;
 }
 
 /*
@@ -439,24 +415,10 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 /* Free data buffers completely. */
 static void ide_tape_kfree_buffer(idetape_tape_t *tape)
 {
-	struct idetape_bh *prev_bh, *bh = tape->merge_bh;
-
-	while (bh) {
-		u32 size = bh->b_size;
-
-		while (size) {
-			unsigned int order = fls(size >> PAGE_SHIFT)-1;
-
-			if (bh->b_data)
-				free_pages((unsigned long)bh->b_data, order);
+	struct idetape_bh *bh = tape->merge_bh;
 
-			size &= (order-1);
-			bh->b_data += (1 << order) * PAGE_SIZE;
-		}
-		prev_bh = bh;
-		bh = bh->b_reqnext;
-		kfree(prev_bh);
-	}
+	kfree(bh->b_data);
+	kfree(bh);
 }
 
 static void ide_tape_handle_dsc(ide_drive_t *);
@@ -861,117 +823,50 @@ out:
 }
 
 /*
- * The function below uses __get_free_pages to allocate a data buffer of size
- * tape->buffer_size (or a bit more). We attempt to combine sequential pages as
- * much as possible.
- *
- * It returns a pointer to the newly allocated buffer, or NULL in case of
- * failure.
+ * It returns a pointer to the newly allocated buffer, or NULL in case
+ * of failure.
  */
 static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape,
-						  int full, int clear)
-{
-	struct idetape_bh *prev_bh, *bh, *merge_bh;
-	int pages = tape->pages_per_buffer;
-	unsigned int order, b_allocd;
-	char *b_data = NULL;
-
-	merge_bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
-	bh = merge_bh;
-	if (bh == NULL)
-		goto abort;
-
-	order = fls(pages) - 1;
-	bh->b_data = (char *) __get_free_pages(GFP_KERNEL, order);
-	if (!bh->b_data)
-		goto abort;
-	b_allocd = (1 << order) * PAGE_SIZE;
-	pages &= (order-1);
-
-	if (clear)
-		memset(bh->b_data, 0, b_allocd);
-	bh->b_reqnext = NULL;
-	bh->b_size = b_allocd;
-	atomic_set(&bh->b_count, full ? bh->b_size : 0);
+						  int full)
+{
+	struct idetape_bh *bh;
 
-	while (pages) {
-		order = fls(pages) - 1;
-		b_data = (char *) __get_free_pages(GFP_KERNEL, order);
-		if (!b_data)
-			goto abort;
-		b_allocd = (1 << order) * PAGE_SIZE;
-
-		if (clear)
-			memset(b_data, 0, b_allocd);
-
-		/* newly allocated page frames below buffer header or ...*/
-		if (bh->b_data == b_data + b_allocd) {
-			bh->b_size += b_allocd;
-			bh->b_data -= b_allocd;
-			if (full)
-				atomic_add(b_allocd, &bh->b_count);
-			continue;
-		}
-		/* they are above the header */
-		if (b_data == bh->b_data + bh->b_size) {
-			bh->b_size += b_allocd;
-			if (full)
-				atomic_add(b_allocd, &bh->b_count);
-			continue;
-		}
-		prev_bh = bh;
-		bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
-		if (!bh) {
-			free_pages((unsigned long) b_data, order);
-			goto abort;
-		}
-		bh->b_reqnext = NULL;
-		bh->b_data = b_data;
-		bh->b_size = b_allocd;
-		atomic_set(&bh->b_count, full ? bh->b_size : 0);
-		prev_bh->b_reqnext = bh;
+	bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
+	if (!bh)
+		return NULL;
 
-		pages &= (order-1);
+	bh->b_data = kmalloc(tape->buffer_size, GFP_KERNEL);
+	if (!bh->b_data) {
+		kfree(bh);
+		return NULL;
 	}
 
-	bh->b_size -= tape->excess_bh_size;
-	if (full)
-		atomic_sub(tape->excess_bh_size, &bh->b_count);
-	return merge_bh;
-abort:
-	ide_tape_kfree_buffer(tape);
-	return NULL;
+	bh->b_size = tape->buffer_size;
+	atomic_set(&bh->b_count, full ? bh->b_size : 0);
+
+	return bh;
 }
 
 static int idetape_copy_stage_from_user(idetape_tape_t *tape,
 					const char __user *buf, int n)
 {
 	struct idetape_bh *bh = tape->bh;
-	int count;
 	int ret = 0;
 
-	while (n) {
-		if (bh == NULL) {
+	if (n) {
+		if (bh == NULL || n > bh->b_size - atomic_read(&bh->b_count)) {
 			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
 					__func__);
 			return 1;
 		}
-		count = min((unsigned int)
-				(bh->b_size - atomic_read(&bh->b_count)),
-				(unsigned int)n);
 		if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf,
-				count))
+				   n))
 			ret = 1;
-		n -= count;
-		atomic_add(count, &bh->b_count);
-		buf += count;
-		if (atomic_read(&bh->b_count) == bh->b_size) {
-			bh = bh->b_reqnext;
-			if (bh)
-				atomic_set(&bh->b_count, 0);
-		}
+		atomic_add(n, &bh->b_count);
+		if (atomic_read(&bh->b_count) == bh->b_size)
+			tape->bh = NULL;
 	}
-	tape->bh = bh;
+
 	return ret;
 }
 
@@ -979,30 +874,20 @@ static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf,
 				      int n)
 {
 	struct idetape_bh *bh = tape->bh;
-	int count;
 	int ret = 0;
 
-	while (n) {
-		if (bh == NULL) {
+	if (n) {
+		if (bh == NULL || n > tape->b_count) {
 			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
 					__func__);
 			return 1;
 		}
-		count = min(tape->b_count, n);
-		if  (copy_to_user(buf, tape->b_data, count))
+		if (copy_to_user(buf, tape->b_data, n))
 			ret = 1;
-		n -= count;
-		tape->b_data += count;
-		tape->b_count -= count;
-		buf += count;
-		if (!tape->b_count) {
-			bh = bh->b_reqnext;
-			tape->bh = bh;
-			if (bh) {
-				tape->b_data = bh->b_data;
-				tape->b_count = atomic_read(&bh->b_count);
-			}
-		}
+		tape->b_data += n;
+		tape->b_count -= n;
+		if (!tape->b_count)
+			tape->bh = NULL;
 	}
 	return ret;
 }
@@ -1254,7 +1139,7 @@ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
 static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
-	int blocks, min;
+	int blocks;
 	struct idetape_bh *bh;
 
 	if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
@@ -1269,31 +1154,16 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
 	if (tape->merge_bh_size) {
 		blocks = tape->merge_bh_size / tape->blk_size;
 		if (tape->merge_bh_size % tape->blk_size) {
-			unsigned int i;
-
+			unsigned int i = tape->blk_size -
+				tape->merge_bh_size % tape->blk_size;
 			blocks++;
-			i = tape->blk_size - tape->merge_bh_size %
-				tape->blk_size;
-			bh = tape->bh->b_reqnext;
-			while (bh) {
-				atomic_set(&bh->b_count, 0);
-				bh = bh->b_reqnext;
-			}
 			bh = tape->bh;
-			while (i) {
-				if (bh == NULL) {
-					printk(KERN_INFO "ide-tape: bug,"
-							 " bh NULL\n");
-					break;
-				}
-				min = min(i, (unsigned int)(bh->b_size -
-						atomic_read(&bh->b_count)));
+			if (bh) {
 				memset(bh->b_data + atomic_read(&bh->b_count),
-						0, min);
-				atomic_add(min, &bh->b_count);
-				i -= min;
-				bh = bh->b_reqnext;
-			}
+				       0, i);
+				atomic_add(i, &bh->b_count);
+			} else
+				printk(KERN_INFO "ide-tape: bug, bh NULL\n");
 		}
 		(void) idetape_add_chrdev_write_request(drive, blocks);
 		tape->merge_bh_size = 0;
@@ -1321,7 +1191,7 @@ static int idetape_init_read(ide_drive_t *drive)
 					 " 0 now\n");
 			tape->merge_bh_size = 0;
 		}
-		tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0);
+		tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0);
 		if (!tape->merge_bh)
 			return -ENOMEM;
 		tape->chrdev_dir = IDETAPE_DIR_READ;
@@ -1368,23 +1238,18 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
 static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
 {
 	idetape_tape_t *tape = drive->driver_data;
-	struct idetape_bh *bh;
+	struct idetape_bh *bh = tape->merge_bh;
 	int blocks;
 
 	while (bcount) {
 		unsigned int count;
 
-		bh = tape->merge_bh;
 		count = min(tape->buffer_size, bcount);
 		bcount -= count;
 		blocks = count / tape->blk_size;
-		while (count) {
-			atomic_set(&bh->b_count,
-				   min(count, (unsigned int)bh->b_size));
-			memset(bh->b_data, 0, atomic_read(&bh->b_count));
-			count -= atomic_read(&bh->b_count);
-			bh = bh->b_reqnext;
-		}
+		atomic_set(&bh->b_count, count);
+		memset(bh->b_data, 0, atomic_read(&bh->b_count));
+
 		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks,
 				      tape->merge_bh);
 	}
@@ -1596,7 +1461,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 				"should be 0 now\n");
 			tape->merge_bh_size = 0;
 		}
-		tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0);
+		tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0);
 		if (!tape->merge_bh)
 			return -ENOMEM;
 		tape->chrdev_dir = IDETAPE_DIR_WRITE;
@@ -1970,7 +1835,7 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor)
 	idetape_tape_t *tape = drive->driver_data;
 
 	ide_tape_flush_merge_buffer(drive);
-	tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1, 0);
+	tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1);
 	if (tape->merge_bh != NULL) {
 		idetape_pad_zeros(drive, tape->blk_size *
 				(tape->user_bs_factor - 1));
@@ -2201,11 +2066,6 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 		tape->buffer_size = *ctl * tape->blk_size;
 	}
 	buffer_size = tape->buffer_size;
-	tape->pages_per_buffer = buffer_size / PAGE_SIZE;
-	if (buffer_size % PAGE_SIZE) {
-		tape->pages_per_buffer++;
-		tape->excess_bh_size = PAGE_SIZE - buffer_size % PAGE_SIZE;
-	}
 
 	/* select the "best" DSC read/write polling freq */
 	speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]);
-- 
1.6.0.2

[PATCH 04/10] ide-tape: use standard data transfer mechanism

[Tejun Heo]

Impact: use standard way to transfer data

ide-tape uses rq in an interesting way.  For r/w requests, rq->special
is used to carry a private buffer management structure idetape_bh and
rq->nr_sectors and current_nr_sectors are initialized to the number of
idetape blocks which isn't necessary 512 bytes.  Also,
rq->current_nr_sectors is used to report back the residual count in
units of idetape blocks.

This peculiarity taxes both block layer and ide.  ide-atapi has
different paths and hooks to accomodate it and what a rq means becomes
quite confusing and making changes at the block layer becomes quite
difficult and error-prone.

This patch makes ide-tape use bio instead.  With the previous patch,
ide-tape currently is using single contiguos buffer so replacing it
isn't difficult.  Data buffer is mapped into bio using
blk_rq_map_kern() in idetape_queue_rw_tail().  idetape_io_buffers()
and idetape_update_buffers() are dropped and pc->bh is set to null to
tell ide-atapi to use standard data transfer mechanism and idetape_bh
byte counts are updated by the issuer on completion using the residual
count.

This change also nicely removes the FIXME in ide_pc_intr() where
ide-tape rqs need to be completed using ide_rq_bytes() instead of
blk_rq_bytes() (although this didn't really matter as the request
didn't have bio).

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
---
 drivers/ide/ide-atapi.c |    6 +--
 drivers/ide/ide-tape.c  |  112 ++++++++++-------------------------------------
 2 files changed, 24 insertions(+), 94 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 3df5442..b9dd450 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -413,11 +413,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 		 * ->pc_callback() might change rq->data_len for
 		 * residual count, cache total length.
 		 */
-		if (!blk_special_request(rq) &&
-		    (drive->media == ide_tape && !rq->bio))
-			done = ide_rq_bytes(rq);        /* FIXME */
-		else
-			done = blk_rq_bytes(rq);
+		done = blk_rq_bytes(rq);
 
 		/* Command finished - Call the callback function */
 		uptodate = drive->pc_callback(drive, dsc);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index b2afbc7..b373ac8 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -292,65 +292,6 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
 	return tape;
 }
 
-static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
-				  unsigned int bcount)
-{
-	struct idetape_bh *bh = pc->bh;
-	int count;
-
-	if (bcount && bh) {
-		count = min(
-			(unsigned int)(bh->b_size - atomic_read(&bh->b_count)),
-			bcount);
-		drive->hwif->tp_ops->input_data(drive, NULL, bh->b_data +
-					atomic_read(&bh->b_count), count);
-		bcount -= count;
-		atomic_add(count, &bh->b_count);
-		if (atomic_read(&bh->b_count) == bh->b_size)
-			pc->bh = NULL;
-	}
-
-	return bcount;
-}
-
-static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
-				   unsigned int bcount)
-{
-	struct idetape_bh *bh = pc->bh;
-	int count;
-
-	if (bcount && bh) {
-		count = min((unsigned int)pc->b_count, (unsigned int)bcount);
-		drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count);
-		bcount -= count;
-		pc->b_data += count;
-		pc->b_count -= count;
-		if (!pc->b_count)
-			pc->bh = NULL;
-	}
-
-	return bcount;
-}
-
-static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc)
-{
-	struct idetape_bh *bh = pc->bh;
-	unsigned int bcount = pc->xferred;
-
-	if (pc->flags & PC_FLAG_WRITING)
-		return;
-	if (bcount) {
-		if (bh == NULL || bcount > bh->b_size) {
-			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
-					__func__);
-			return;
-		}
-		atomic_set(&bh->b_count, bcount);
-		if (atomic_read(&bh->b_count) == bh->b_size)
-			pc->bh = NULL;
-	}
-}
-
 /*
  * called on each failed packet command retry to analyze the request sense. We
  * currently do not utilize this information.
@@ -368,12 +309,10 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 		 pc->c[0], tape->sense_key, tape->asc, tape->ascq);
 
 	/* Correct pc->xferred by asking the tape.	 */
-	if (pc->flags & PC_FLAG_DMA_ERROR) {
+	if (pc->flags & PC_FLAG_DMA_ERROR)
 		pc->xferred = pc->req_xfer -
 			tape->blk_size *
 			get_unaligned_be32(&sense[3]);
-		idetape_update_buffers(drive, pc);
-	}
 
 	/*
 	 * If error was the result of a zero-length read or write command,
@@ -458,7 +397,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
 		}
 
 		tape->first_frame += blocks;
-		rq->current_nr_sectors -= blocks;
+		rq->data_len -= blocks * tape->blk_size;
 
 		if (pc->error) {
 			uptodate = 0;
@@ -520,19 +459,6 @@ static void ide_tape_handle_dsc(ide_drive_t *drive)
 	idetape_postpone_request(drive);
 }
 
-static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
-				unsigned int bcount, int write)
-{
-	unsigned int bleft;
-
-	if (write)
-		bleft = idetape_output_buffers(drive, pc, bcount);
-	else
-		bleft = idetape_input_buffers(drive, pc, bcount);
-
-	return bcount - bleft;
-}
-
 /*
  * Packet Command Interface
  *
@@ -683,7 +609,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
 	ide_init_pc(pc);
 	put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
 	pc->c[1] = 1;
-	pc->bh = bh;
+	pc->bh = NULL;
 	pc->buf = NULL;
 	pc->buf_size = length * tape->blk_size;
 	pc->req_xfer = pc->buf_size;
@@ -1063,10 +989,12 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
 				 struct idetape_bh *bh)
 {
 	idetape_tape_t *tape = drive->driver_data;
+	size_t size = blocks * tape->blk_size;
 	struct request *rq;
-	int ret, errors;
+	int ret;
 
 	debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
+	BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE);
 
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_SPECIAL;
@@ -1074,21 +1002,29 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
 	rq->rq_disk = tape->disk;
 	rq->special = (void *)bh;
 	rq->sector = tape->first_frame;
-	rq->nr_sectors = blocks;
-	rq->current_nr_sectors = blocks;
+
+	if (size) {
+		ret = blk_rq_map_kern(drive->queue, rq, bh->b_data, size,
+				      __GFP_WAIT);
+		if (ret)
+			goto out_put;
+	}
+
 	blk_execute_rq(drive->queue, tape->disk, rq, 0);
 
-	errors = rq->errors;
-	ret = tape->blk_size * (blocks - rq->current_nr_sectors);
-	blk_put_request(rq);
+	/* calculate the number of transferred bytes and update bh */
+	size -= rq->data_len;
+	if (cmd == REQ_IDETAPE_READ)
+		atomic_add(size, &bh->b_count);
 
-	if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0)
-		return 0;
+	ret = size;
+	if (rq->errors == IDE_DRV_ERROR_GENERAL)
+		ret = -EIO;
 
 	if (tape->merge_bh)
 		idetape_init_merge_buffer(tape);
-	if (errors == IDE_DRV_ERROR_GENERAL)
-		return -EIO;
+out_put:
+	blk_put_request(rq);
 	return ret;
 }
 
@@ -2034,8 +1970,6 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	u16 *ctl = (u16 *)&tape->caps[12];
 
 	drive->pc_callback	 = ide_tape_callback;
-	drive->pc_update_buffers = idetape_update_buffers;
-	drive->pc_io_buffers	 = ide_tape_io_buffers;
 
 	drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
 
-- 
1.6.0.2

[PATCH 05/10] ide-tape: kill idetape_bh

[Tejun Heo]

Impact: kill now unnecessary idetape_bh

With everything using standard mechanisms, there is no need for
idetape_bh anymore.  Kill it and use tape->buf, cur and valid to
describe data buffer instead.

Changes worth mentioning are...

* idetape_queue_rq_tail() now always queue tape->buf and and adjusts
  buffer state properly before completion.

* idetape_pad_zeros() clears the buffer only once.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/ide/ide-tape.c |  305 +++++++++++++-----------------------------------
 1 files changed, 84 insertions(+), 221 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index b373ac8..d2e9c09 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -131,12 +131,6 @@ enum {
 	IDETAPE_DIR_WRITE = (1 << 2),
 };
 
-struct idetape_bh {
-	u32 b_size;
-	atomic_t b_count;
-	char *b_data;
-};
-
 /* Tape door status */
 #define DOOR_UNLOCKED			0
 #define DOOR_LOCKED			1
@@ -218,14 +212,12 @@ typedef struct ide_tape_obj {
 
 	/* Data buffer size chosen based on the tape's recommendation */
 	int buffer_size;
-	/* merge buffer */
-	struct idetape_bh *merge_bh;
-	/* size of the merge buffer */
-	int merge_bh_size;
-	/* pointer to current buffer head within the merge buffer */
-	struct idetape_bh *bh;
-	char *b_data;
-	int b_count;
+	/* Staging buffer of buffer_size bytes */
+	void *buf;
+	/* The read/write cursor */
+	void *cur;
+	/* The number of valid bytes in buf */
+	size_t valid;
 
 	/* Measures average tape speed */
 	unsigned long avg_time;
@@ -351,15 +343,6 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 	}
 }
 
-/* Free data buffers completely. */
-static void ide_tape_kfree_buffer(idetape_tape_t *tape)
-{
-	struct idetape_bh *bh = tape->merge_bh;
-
-	kfree(bh->b_data);
-	kfree(bh);
-}
-
 static void ide_tape_handle_dsc(ide_drive_t *);
 
 static int ide_tape_callback(ide_drive_t *drive, int dsc)
@@ -603,8 +586,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
 				   struct ide_atapi_pc *pc, struct request *rq,
 				   u8 opcode)
 {
-	struct idetape_bh *bh = (struct idetape_bh *)rq->special;
-	unsigned int length = rq->current_nr_sectors;
+	unsigned int length = rq->nr_sectors;
 
 	ide_init_pc(pc);
 	put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
@@ -616,14 +598,11 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
 	if (pc->req_xfer == tape->buffer_size)
 		pc->flags |= PC_FLAG_DMA_OK;
 
-	if (opcode == READ_6) {
+	if (opcode == READ_6)
 		pc->c[0] = READ_6;
-		atomic_set(&bh->b_count, 0);
-	} else if (opcode == WRITE_6) {
+	else if (opcode == WRITE_6) {
 		pc->c[0] = WRITE_6;
 		pc->flags |= PC_FLAG_WRITING;
-		pc->b_data = bh->b_data;
-		pc->b_count = atomic_read(&bh->b_count);
 	}
 
 	memcpy(rq->cmd, pc->c, 12);
@@ -639,10 +618,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	struct ide_cmd cmd;
 	u8 stat;
 
-	debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu,"
-			" current_nr_sectors: %u\n",
-			(unsigned long long)rq->sector, rq->nr_sectors,
-			rq->current_nr_sectors);
+	debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n"
+		  (unsigned long long)rq->sector, rq->nr_sectors);
 
 	if (!(blk_special_request(rq) || blk_sense_request(rq))) {
 		/* We do not support buffer cache originated requests. */
@@ -749,89 +726,6 @@ out:
 }
 
 /*
- * It returns a pointer to the newly allocated buffer, or NULL in case
- * of failure.
- */
-static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape,
-						  int full)
-{
-	struct idetape_bh *bh;
-
-	bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
-	if (!bh)
-		return NULL;
-
-	bh->b_data = kmalloc(tape->buffer_size, GFP_KERNEL);
-	if (!bh->b_data) {
-		kfree(bh);
-		return NULL;
-	}
-
-	bh->b_size = tape->buffer_size;
-	atomic_set(&bh->b_count, full ? bh->b_size : 0);
-
-	return bh;
-}
-
-static int idetape_copy_stage_from_user(idetape_tape_t *tape,
-					const char __user *buf, int n)
-{
-	struct idetape_bh *bh = tape->bh;
-	int ret = 0;
-
-	if (n) {
-		if (bh == NULL || n > bh->b_size - atomic_read(&bh->b_count)) {
-			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
-					__func__);
-			return 1;
-		}
-		if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf,
-				   n))
-			ret = 1;
-		atomic_add(n, &bh->b_count);
-		if (atomic_read(&bh->b_count) == bh->b_size)
-			tape->bh = NULL;
-	}
-
-	return ret;
-}
-
-static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf,
-				      int n)
-{
-	struct idetape_bh *bh = tape->bh;
-	int ret = 0;
-
-	if (n) {
-		if (bh == NULL || n > tape->b_count) {
-			printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
-					__func__);
-			return 1;
-		}
-		if (copy_to_user(buf, tape->b_data, n))
-			ret = 1;
-		tape->b_data += n;
-		tape->b_count -= n;
-		if (!tape->b_count)
-			tape->bh = NULL;
-	}
-	return ret;
-}
-
-static void idetape_init_merge_buffer(idetape_tape_t *tape)
-{
-	struct idetape_bh *bh = tape->merge_bh;
-	tape->bh = tape->merge_bh;
-
-	if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
-		atomic_set(&bh->b_count, 0);
-	else {
-		tape->b_data = bh->b_data;
-		tape->b_count = atomic_read(&bh->b_count);
-	}
-}
-
-/*
  * Write a filemark if write_filemark=1. Flush the device buffers without
  * writing a filemark otherwise.
  */
@@ -928,10 +822,10 @@ static void __ide_tape_discard_merge_buffer(ide_drive_t *drive)
 		return;
 
 	clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags);
-	tape->merge_bh_size = 0;
-	if (tape->merge_bh != NULL) {
-		ide_tape_kfree_buffer(tape);
-		tape->merge_bh = NULL;
+	tape->valid = 0;
+	if (tape->buf != NULL) {
+		kfree(tape->buf);
+		tape->buf = NULL;
 	}
 
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
@@ -985,8 +879,7 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
  * Generate a read/write request for the block device interface and wait for it
  * to be serviced.
  */
-static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
-				 struct idetape_bh *bh)
+static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	size_t size = blocks * tape->blk_size;
@@ -1000,11 +893,10 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
 	rq->cmd_type = REQ_TYPE_SPECIAL;
 	rq->cmd[13] = cmd;
 	rq->rq_disk = tape->disk;
-	rq->special = (void *)bh;
 	rq->sector = tape->first_frame;
 
 	if (size) {
-		ret = blk_rq_map_kern(drive->queue, rq, bh->b_data, size,
+		ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size,
 				      __GFP_WAIT);
 		if (ret)
 			goto out_put;
@@ -1012,17 +904,17 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
 
 	blk_execute_rq(drive->queue, tape->disk, rq, 0);
 
-	/* calculate the number of transferred bytes and update bh */
+	/* calculate the number of transferred bytes and update buffer state */
 	size -= rq->data_len;
+	tape->cur = tape->buf;
 	if (cmd == REQ_IDETAPE_READ)
-		atomic_add(size, &bh->b_count);
+		tape->valid = size;
+	else
+		tape->valid = 0;
 
 	ret = size;
 	if (rq->errors == IDE_DRV_ERROR_GENERAL)
 		ret = -EIO;
-
-	if (tape->merge_bh)
-		idetape_init_merge_buffer(tape);
 out_put:
 	blk_put_request(rq);
 	return ret;
@@ -1064,49 +956,33 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
 /* Queue up a character device originated write request. */
 static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
 {
-	idetape_tape_t *tape = drive->driver_data;
-
 	debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
 
-	return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
-				     blocks, tape->merge_bh);
+	return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks);
 }
 
 static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	int blocks;
-	struct idetape_bh *bh;
 
 	if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
 		printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer"
 				" but we are not writing.\n");
 		return;
 	}
-	if (tape->merge_bh_size > tape->buffer_size) {
-		printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n");
-		tape->merge_bh_size = tape->buffer_size;
-	}
-	if (tape->merge_bh_size) {
-		blocks = tape->merge_bh_size / tape->blk_size;
-		if (tape->merge_bh_size % tape->blk_size) {
-			unsigned int i = tape->blk_size -
-				tape->merge_bh_size % tape->blk_size;
+	if (tape->buf) {
+		blocks = tape->valid / tape->blk_size;
+		if (tape->valid % tape->blk_size) {
 			blocks++;
-			bh = tape->bh;
-			if (bh) {
-				memset(bh->b_data + atomic_read(&bh->b_count),
-				       0, i);
-				atomic_add(i, &bh->b_count);
-			} else
-				printk(KERN_INFO "ide-tape: bug, bh NULL\n");
+			memset(tape->buf + tape->valid, 0,
+			       tape->blk_size - tape->valid % tape->blk_size);
 		}
 		(void) idetape_add_chrdev_write_request(drive, blocks);
-		tape->merge_bh_size = 0;
 	}
-	if (tape->merge_bh != NULL) {
-		ide_tape_kfree_buffer(tape);
-		tape->merge_bh = NULL;
+	if (tape->buf != NULL) {
+		kfree(tape->buf);
+		tape->buf = NULL;
 	}
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
 }
@@ -1122,15 +998,15 @@ static int idetape_init_read(ide_drive_t *drive)
 			ide_tape_flush_merge_buffer(drive);
 			idetape_flush_tape_buffers(drive);
 		}
-		if (tape->merge_bh || tape->merge_bh_size) {
-			printk(KERN_ERR "ide-tape: merge_bh_size should be"
-					 " 0 now\n");
-			tape->merge_bh_size = 0;
+		if (tape->buf || tape->valid) {
+			printk(KERN_ERR "ide-tape: valid should be 0 now\n");
+			tape->valid = 0;
 		}
-		tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0);
-		if (!tape->merge_bh)
+		tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
+		if (!tape->buf)
 			return -ENOMEM;
 		tape->chrdev_dir = IDETAPE_DIR_READ;
+		tape->cur = tape->buf;
 
 		/*
 		 * Issue a read 0 command to ensure that DSC handshake is
@@ -1140,11 +1016,10 @@ static int idetape_init_read(ide_drive_t *drive)
 		 */
 		if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
 			bytes_read = idetape_queue_rw_tail(drive,
-							REQ_IDETAPE_READ, 0,
-							tape->merge_bh);
+							REQ_IDETAPE_READ, 0);
 			if (bytes_read < 0) {
-				ide_tape_kfree_buffer(tape);
-				tape->merge_bh = NULL;
+				kfree(tape->buf);
+				tape->buf = NULL;
 				tape->chrdev_dir = IDETAPE_DIR_NONE;
 				return bytes_read;
 			}
@@ -1157,8 +1032,6 @@ static int idetape_init_read(ide_drive_t *drive)
 /* called from idetape_chrdev_read() to service a chrdev read request. */
 static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
 {
-	idetape_tape_t *tape = drive->driver_data;
-
 	debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
 
 	/* If we are at a filemark, return a read length of 0 */
@@ -1167,27 +1040,21 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
 
 	idetape_init_read(drive);
 
-	return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks,
-				     tape->merge_bh);
+	return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks);
 }
 
 static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
 {
 	idetape_tape_t *tape = drive->driver_data;
-	struct idetape_bh *bh = tape->merge_bh;
-	int blocks;
+
+	memset(tape->buf, 0, tape->buffer_size);
 
 	while (bcount) {
-		unsigned int count;
+		unsigned int count = min(tape->buffer_size, bcount);
 
-		count = min(tape->buffer_size, bcount);
+		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
+				      count / tape->blk_size);
 		bcount -= count;
-		blocks = count / tape->blk_size;
-		atomic_set(&bh->b_count, count);
-		memset(bh->b_data, 0, atomic_read(&bh->b_count));
-
-		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks,
-				      tape->merge_bh);
 	}
 }
 
@@ -1267,7 +1134,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
 	}
 
 	if (tape->chrdev_dir == IDETAPE_DIR_READ) {
-		tape->merge_bh_size = 0;
+		tape->valid = 0;
 		if (test_and_clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
 			++count;
 		ide_tape_discard_merge_buffer(drive, 0);
@@ -1333,20 +1200,20 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 		return rc;
 	if (count == 0)
 		return (0);
-	if (tape->merge_bh_size) {
-		actually_read = min((unsigned int)(tape->merge_bh_size),
-				    (unsigned int)count);
-		if (idetape_copy_stage_to_user(tape, buf, actually_read))
+	if (tape->valid) {
+		actually_read = min_t(unsigned int, tape->valid, count);
+		if (copy_to_user(buf, tape->cur, actually_read))
 			ret = -EFAULT;
 		buf += actually_read;
-		tape->merge_bh_size -= actually_read;
 		count -= actually_read;
+		tape->cur += actually_read;
+		tape->valid -= actually_read;
 	}
 	while (count >= tape->buffer_size) {
 		bytes_read = idetape_add_chrdev_read_request(drive, ctl);
 		if (bytes_read <= 0)
 			goto finish;
-		if (idetape_copy_stage_to_user(tape, buf, bytes_read))
+		if (copy_to_user(buf, tape->cur, bytes_read))
 			ret = -EFAULT;
 		buf += bytes_read;
 		count -= bytes_read;
@@ -1357,10 +1224,11 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 		if (bytes_read <= 0)
 			goto finish;
 		temp = min((unsigned long)count, (unsigned long)bytes_read);
-		if (idetape_copy_stage_to_user(tape, buf, temp))
+		if (copy_to_user(buf, tape->cur, temp))
 			ret = -EFAULT;
 		actually_read += temp;
-		tape->merge_bh_size = bytes_read-temp;
+		tape->cur += temp;
+		tape->valid -= temp;
 	}
 finish:
 	if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) {
@@ -1392,16 +1260,15 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 	if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
 		if (tape->chrdev_dir == IDETAPE_DIR_READ)
 			ide_tape_discard_merge_buffer(drive, 1);
-		if (tape->merge_bh || tape->merge_bh_size) {
-			printk(KERN_ERR "ide-tape: merge_bh_size "
-				"should be 0 now\n");
-			tape->merge_bh_size = 0;
+		if (tape->buf || tape->valid) {
+			printk(KERN_ERR "ide-tape: valid should be 0 now\n");
+			tape->valid = 0;
 		}
-		tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0);
-		if (!tape->merge_bh)
+		tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
+		if (!tape->buf)
 			return -ENOMEM;
 		tape->chrdev_dir = IDETAPE_DIR_WRITE;
-		idetape_init_merge_buffer(tape);
+		tape->cur = tape->buf;
 
 		/*
 		 * Issue a write 0 command to ensure that DSC handshake is
@@ -1411,11 +1278,10 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 		 */
 		if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
 			ssize_t retval = idetape_queue_rw_tail(drive,
-							REQ_IDETAPE_WRITE, 0,
-							tape->merge_bh);
+							REQ_IDETAPE_WRITE, 0);
 			if (retval < 0) {
-				ide_tape_kfree_buffer(tape);
-				tape->merge_bh = NULL;
+				kfree(tape->buf);
+				tape->buf = NULL;
 				tape->chrdev_dir = IDETAPE_DIR_NONE;
 				return retval;
 			}
@@ -1423,23 +1289,19 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 	}
 	if (count == 0)
 		return (0);
-	if (tape->merge_bh_size) {
-		if (tape->merge_bh_size >= tape->buffer_size) {
-			printk(KERN_ERR "ide-tape: bug: merge buf too big\n");
-			tape->merge_bh_size = 0;
-		}
-		actually_written = min((unsigned int)
-				(tape->buffer_size - tape->merge_bh_size),
-				(unsigned int)count);
-		if (idetape_copy_stage_from_user(tape, buf, actually_written))
-				ret = -EFAULT;
+	if (tape->valid < tape->buffer_size) {
+		actually_written = min_t(unsigned int,
+					 tape->buffer_size - tape->valid,
+					 count);
+		if (copy_from_user(tape->cur, buf, actually_written))
+			ret = -EFAULT;
 		buf += actually_written;
-		tape->merge_bh_size += actually_written;
 		count -= actually_written;
+		tape->cur += actually_written;
+		tape->valid += actually_written;
 
-		if (tape->merge_bh_size == tape->buffer_size) {
+		if (tape->valid == tape->buffer_size) {
 			ssize_t retval;
-			tape->merge_bh_size = 0;
 			retval = idetape_add_chrdev_write_request(drive, ctl);
 			if (retval <= 0)
 				return (retval);
@@ -1447,7 +1309,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 	}
 	while (count >= tape->buffer_size) {
 		ssize_t retval;
-		if (idetape_copy_stage_from_user(tape, buf, tape->buffer_size))
+		if (copy_from_user(tape->cur, buf, tape->buffer_size))
 			ret = -EFAULT;
 		buf += tape->buffer_size;
 		count -= tape->buffer_size;
@@ -1458,9 +1320,10 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 	}
 	if (count) {
 		actually_written += count;
-		if (idetape_copy_stage_from_user(tape, buf, count))
+		if (copy_from_user(tape->cur, buf, count))
 			ret = -EFAULT;
-		tape->merge_bh_size += count;
+		tape->cur += count;
+		tape->valid += count;
 	}
 	return ret ? ret : actually_written;
 }
@@ -1623,7 +1486,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
 		idetape_flush_tape_buffers(drive);
 	}
 	if (cmd == MTIOCGET || cmd == MTIOCPOS) {
-		block_offset = tape->merge_bh_size /
+		block_offset = tape->valid /
 			(tape->blk_size * tape->user_bs_factor);
 		position = idetape_read_position(drive);
 		if (position < 0)
@@ -1771,12 +1634,12 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor)
 	idetape_tape_t *tape = drive->driver_data;
 
 	ide_tape_flush_merge_buffer(drive);
-	tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1);
-	if (tape->merge_bh != NULL) {
+	tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
+	if (tape->buf != NULL) {
 		idetape_pad_zeros(drive, tape->blk_size *
 				(tape->user_bs_factor - 1));
-		ide_tape_kfree_buffer(tape);
-		tape->merge_bh = NULL;
+		kfree(tape->buf);
+		tape->buf = NULL;
 	}
 	idetape_write_filemark(drive);
 	idetape_flush_tape_buffers(drive);
@@ -2042,7 +1905,7 @@ static void ide_tape_release(struct device *dev)
 	ide_drive_t *drive = tape->drive;
 	struct gendisk *g = tape->disk;
 
-	BUG_ON(tape->merge_bh_size);
+	BUG_ON(tape->valid);
 
 	drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
 	drive->driver_data = NULL;
-- 
1.6.0.2

[PATCH 06/10] ide-tape: unify r/w init paths

[Tejun Heo]

Impact: cleanup

Read and write init paths are almost identical.  Unify them into
idetape_init_rw().

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/ide/ide-tape.c |  110 ++++++++++++++++++++----------------------------
 1 files changed, 46 insertions(+), 64 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index d2e9c09..4da7fa9 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -987,42 +987,50 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
 	tape->chrdev_dir = IDETAPE_DIR_NONE;
 }
 
-static int idetape_init_read(ide_drive_t *drive)
+static int idetape_init_rw(ide_drive_t *drive, int dir)
 {
 	idetape_tape_t *tape = drive->driver_data;
-	int bytes_read;
+	int rc;
 
-	/* Initialize read operation */
-	if (tape->chrdev_dir != IDETAPE_DIR_READ) {
-		if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
-			ide_tape_flush_merge_buffer(drive);
-			idetape_flush_tape_buffers(drive);
-		}
-		if (tape->buf || tape->valid) {
-			printk(KERN_ERR "ide-tape: valid should be 0 now\n");
-			tape->valid = 0;
-		}
-		tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
-		if (!tape->buf)
-			return -ENOMEM;
-		tape->chrdev_dir = IDETAPE_DIR_READ;
-		tape->cur = tape->buf;
+	BUG_ON(dir != IDETAPE_DIR_READ && dir != IDETAPE_DIR_WRITE);
 
-		/*
-		 * Issue a read 0 command to ensure that DSC handshake is
-		 * switched from completion mode to buffer available mode.
-		 * No point in issuing this if DSC overlap isn't supported, some
-		 * drives (Seagate STT3401A) will return an error.
-		 */
-		if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
-			bytes_read = idetape_queue_rw_tail(drive,
-							REQ_IDETAPE_READ, 0);
-			if (bytes_read < 0) {
-				kfree(tape->buf);
-				tape->buf = NULL;
-				tape->chrdev_dir = IDETAPE_DIR_NONE;
-				return bytes_read;
-			}
+	if (tape->chrdev_dir == dir)
+		return 0;
+
+	if (tape->chrdev_dir == IDETAPE_DIR_READ)
+		ide_tape_discard_merge_buffer(drive, 1);
+	else if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
+		ide_tape_flush_merge_buffer(drive);
+		idetape_flush_tape_buffers(drive);
+	}
+
+	if (tape->buf || tape->valid) {
+		printk(KERN_ERR "ide-tape: valid should be 0 now\n");
+		tape->valid = 0;
+	}
+
+	tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
+	if (!tape->buf)
+		return -ENOMEM;
+	tape->chrdev_dir = dir;
+	tape->cur = tape->buf;
+
+	/*
+	 * Issue a 0 rw command to ensure that DSC handshake is
+	 * switched from completion mode to buffer available mode.  No
+	 * point in issuing this if DSC overlap isn't supported, some
+	 * drives (Seagate STT3401A) will return an error.
+	 */
+	if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
+		int cmd = dir == IDETAPE_DIR_READ ? REQ_IDETAPE_READ
+						  : REQ_IDETAPE_WRITE;
+
+		rc = idetape_queue_rw_tail(drive, cmd, 0);
+		if (rc < 0) {
+			kfree(tape->buf);
+			tape->buf = NULL;
+			tape->chrdev_dir = IDETAPE_DIR_NONE;
+			return rc;
 		}
 	}
 
@@ -1038,7 +1046,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
 	if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
 		return 0;
 
-	idetape_init_read(drive);
+	idetape_init_rw(drive, IDETAPE_DIR_READ);
 
 	return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks);
 }
@@ -1195,7 +1203,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 			    (count % tape->blk_size) == 0)
 				tape->user_bs_factor = count / tape->blk_size;
 	}
-	rc = idetape_init_read(drive);
+	rc = idetape_init_rw(drive, IDETAPE_DIR_READ);
 	if (rc < 0)
 		return rc;
 	if (count == 0)
@@ -1249,6 +1257,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 	ssize_t actually_written = 0;
 	ssize_t ret = 0;
 	u16 ctl = *(u16 *)&tape->caps[12];
+	int rc;
 
 	/* The drive is write protected. */
 	if (tape->write_prot)
@@ -1257,36 +1266,9 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
 	/* Initialize write operation */
-	if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
-		if (tape->chrdev_dir == IDETAPE_DIR_READ)
-			ide_tape_discard_merge_buffer(drive, 1);
-		if (tape->buf || tape->valid) {
-			printk(KERN_ERR "ide-tape: valid should be 0 now\n");
-			tape->valid = 0;
-		}
-		tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
-		if (!tape->buf)
-			return -ENOMEM;
-		tape->chrdev_dir = IDETAPE_DIR_WRITE;
-		tape->cur = tape->buf;
-
-		/*
-		 * Issue a write 0 command to ensure that DSC handshake is
-		 * switched from completion mode to buffer available mode. No
-		 * point in issuing this if DSC overlap isn't supported, some
-		 * drives (Seagate STT3401A) will return an error.
-		 */
-		if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
-			ssize_t retval = idetape_queue_rw_tail(drive,
-							REQ_IDETAPE_WRITE, 0);
-			if (retval < 0) {
-				kfree(tape->buf);
-				tape->buf = NULL;
-				tape->chrdev_dir = IDETAPE_DIR_NONE;
-				return retval;
-			}
-		}
-	}
+	rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE);
+	if (rc < 0)
+		return rc;
 	if (count == 0)
 		return (0);
 	if (tape->valid < tape->buffer_size) {
-- 
1.6.0.2

[PATCH 07/10] ide-tape: use byte size instead of sectors on rw issue functions

[Tejun Heo]

Impact: cleanup

Byte size is what most issue functions deal with, make
idetape_queue_rw_tail() and its wrappers take byte size instead of
sector counts.  idetape_chrdev_read() and write() functions are
converted to use tape->buffer_size instead of ctl from tape->cap.

This cleans up code a little bit and will ease the next r/w
reimplementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/ide/ide-tape.c |   45 ++++++++++++++++++++-------------------------
 1 files changed, 20 insertions(+), 25 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 4da7fa9..d5e9bb2 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -879,15 +879,15 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
  * Generate a read/write request for the block device interface and wait for it
  * to be serviced.
  */
-static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks)
+static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size)
 {
 	idetape_tape_t *tape = drive->driver_data;
-	size_t size = blocks * tape->blk_size;
 	struct request *rq;
 	int ret;
 
 	debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
 	BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE);
+	BUG_ON(size < 0 || size % tape->blk_size);
 
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_SPECIAL;
@@ -954,17 +954,16 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
 }
 
 /* Queue up a character device originated write request. */
-static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
+static int idetape_add_chrdev_write_request(ide_drive_t *drive, int size)
 {
 	debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
 
-	return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks);
+	return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, size);
 }
 
 static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
-	int blocks;
 
 	if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
 		printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer"
@@ -972,15 +971,10 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
 		return;
 	}
 	if (tape->buf) {
-		blocks = tape->valid / tape->blk_size;
-		if (tape->valid % tape->blk_size) {
-			blocks++;
-			memset(tape->buf + tape->valid, 0,
-			       tape->blk_size - tape->valid % tape->blk_size);
-		}
-		(void) idetape_add_chrdev_write_request(drive, blocks);
-	}
-	if (tape->buf != NULL) {
+		size_t aligned = roundup(tape->valid, tape->blk_size);
+
+		memset(tape->cur, 0, aligned - tape->valid);
+		idetape_add_chrdev_write_request(drive, aligned);
 		kfree(tape->buf);
 		tape->buf = NULL;
 	}
@@ -1038,9 +1032,9 @@ static int idetape_init_rw(ide_drive_t *drive, int dir)
 }
 
 /* called from idetape_chrdev_read() to service a chrdev read request. */
-static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
+static int idetape_add_chrdev_read_request(ide_drive_t *drive, int size)
 {
-	debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
+	debug_log(DBG_PROCS, "Enter %s, %d bytes\n", __func__, size);
 
 	/* If we are at a filemark, return a read length of 0 */
 	if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
@@ -1048,7 +1042,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
 
 	idetape_init_rw(drive, IDETAPE_DIR_READ);
 
-	return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks);
+	return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, size);
 }
 
 static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
@@ -1060,8 +1054,7 @@ static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
 	while (bcount) {
 		unsigned int count = min(tape->buffer_size, bcount);
 
-		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
-				      count / tape->blk_size);
+		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, count);
 		bcount -= count;
 	}
 }
@@ -1193,7 +1186,6 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 	ide_drive_t *drive = tape->drive;
 	ssize_t bytes_read, temp, actually_read = 0, rc;
 	ssize_t ret = 0;
-	u16 ctl = *(u16 *)&tape->caps[12];
 
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
@@ -1218,7 +1210,8 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 		tape->valid -= actually_read;
 	}
 	while (count >= tape->buffer_size) {
-		bytes_read = idetape_add_chrdev_read_request(drive, ctl);
+		bytes_read = idetape_add_chrdev_read_request(drive,
+							     tape->buffer_size);
 		if (bytes_read <= 0)
 			goto finish;
 		if (copy_to_user(buf, tape->cur, bytes_read))
@@ -1228,7 +1221,8 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 		actually_read += bytes_read;
 	}
 	if (count) {
-		bytes_read = idetape_add_chrdev_read_request(drive, ctl);
+		bytes_read = idetape_add_chrdev_read_request(drive,
+							     tape->buffer_size);
 		if (bytes_read <= 0)
 			goto finish;
 		temp = min((unsigned long)count, (unsigned long)bytes_read);
@@ -1256,7 +1250,6 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 	ide_drive_t *drive = tape->drive;
 	ssize_t actually_written = 0;
 	ssize_t ret = 0;
-	u16 ctl = *(u16 *)&tape->caps[12];
 	int rc;
 
 	/* The drive is write protected. */
@@ -1284,7 +1277,8 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 
 		if (tape->valid == tape->buffer_size) {
 			ssize_t retval;
-			retval = idetape_add_chrdev_write_request(drive, ctl);
+			retval = idetape_add_chrdev_write_request(drive,
+							tape->buffer_size);
 			if (retval <= 0)
 				return (retval);
 		}
@@ -1295,7 +1289,8 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 			ret = -EFAULT;
 		buf += tape->buffer_size;
 		count -= tape->buffer_size;
-		retval = idetape_add_chrdev_write_request(drive, ctl);
+		retval = idetape_add_chrdev_write_request(drive,
+							  tape->buffer_size);
 		actually_written += tape->buffer_size;
 		if (retval <= 0)
 			return (retval);
-- 
1.6.0.2

[PATCH 08/10] ide-tape: simplify read/write functions

[Tejun Heo]

Impact: cleanup

idetape_chrdev_read/write() functions are unnecessarily complex when
everything can be handled in a single loop.  Collapse
idetape_add_chrdev_read/write_request() into the rw functions and
simplify the implementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/ide/ide-tape.c |  149 ++++++++++++++++--------------------------------
 1 files changed, 50 insertions(+), 99 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index d5e9bb2..2599579 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -953,14 +953,6 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
 	pc->flags |= PC_FLAG_WAIT_FOR_DSC;
 }
 
-/* Queue up a character device originated write request. */
-static int idetape_add_chrdev_write_request(ide_drive_t *drive, int size)
-{
-	debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
-
-	return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, size);
-}
-
 static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
@@ -974,7 +966,7 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
 		size_t aligned = roundup(tape->valid, tape->blk_size);
 
 		memset(tape->cur, 0, aligned - tape->valid);
-		idetape_add_chrdev_write_request(drive, aligned);
+		idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, aligned);
 		kfree(tape->buf);
 		tape->buf = NULL;
 	}
@@ -1031,20 +1023,6 @@ static int idetape_init_rw(ide_drive_t *drive, int dir)
 	return 0;
 }
 
-/* called from idetape_chrdev_read() to service a chrdev read request. */
-static int idetape_add_chrdev_read_request(ide_drive_t *drive, int size)
-{
-	debug_log(DBG_PROCS, "Enter %s, %d bytes\n", __func__, size);
-
-	/* If we are at a filemark, return a read length of 0 */
-	if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
-		return 0;
-
-	idetape_init_rw(drive, IDETAPE_DIR_READ);
-
-	return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, size);
-}
-
 static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
 {
 	idetape_tape_t *tape = drive->driver_data;
@@ -1184,8 +1162,9 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 {
 	struct ide_tape_obj *tape = file->private_data;
 	ide_drive_t *drive = tape->drive;
-	ssize_t bytes_read, temp, actually_read = 0, rc;
+	size_t done = 0;
 	ssize_t ret = 0;
+	int rc;
 
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
@@ -1195,52 +1174,43 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 			    (count % tape->blk_size) == 0)
 				tape->user_bs_factor = count / tape->blk_size;
 	}
+
 	rc = idetape_init_rw(drive, IDETAPE_DIR_READ);
 	if (rc < 0)
 		return rc;
-	if (count == 0)
-		return (0);
-	if (tape->valid) {
-		actually_read = min_t(unsigned int, tape->valid, count);
-		if (copy_to_user(buf, tape->cur, actually_read))
-			ret = -EFAULT;
-		buf += actually_read;
-		count -= actually_read;
-		tape->cur += actually_read;
-		tape->valid -= actually_read;
-	}
-	while (count >= tape->buffer_size) {
-		bytes_read = idetape_add_chrdev_read_request(drive,
-							     tape->buffer_size);
-		if (bytes_read <= 0)
-			goto finish;
-		if (copy_to_user(buf, tape->cur, bytes_read))
-			ret = -EFAULT;
-		buf += bytes_read;
-		count -= bytes_read;
-		actually_read += bytes_read;
-	}
-	if (count) {
-		bytes_read = idetape_add_chrdev_read_request(drive,
-							     tape->buffer_size);
-		if (bytes_read <= 0)
-			goto finish;
-		temp = min((unsigned long)count, (unsigned long)bytes_read);
-		if (copy_to_user(buf, tape->cur, temp))
+
+	while (done < count) {
+		size_t todo;
+
+		/* refill if staging buffer is empty */
+		if (!tape->valid) {
+			/* If we are at a filemark, nothing more to read */
+			if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
+				break;
+			/* read */
+			if (idetape_queue_rw_tail(drive, REQ_IDETAPE_READ,
+						  tape->buffer_size) <= 0)
+				break;
+		}
+
+		/* copy out */
+		todo = min_t(size_t, count - done, tape->valid);
+		if (copy_to_user(buf + done, tape->cur, todo))
 			ret = -EFAULT;
-		actually_read += temp;
-		tape->cur += temp;
-		tape->valid -= temp;
+
+		tape->cur += todo;
+		tape->valid -= todo;
+		done += todo;
 	}
-finish:
-	if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) {
+
+	if (!done && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) {
 		debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
 
 		idetape_space_over_filemarks(drive, MTFSF, 1);
 		return 0;
 	}
 
-	return ret ? ret : actually_read;
+	return ret ? ret : done;
 }
 
 static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
@@ -1248,7 +1218,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 {
 	struct ide_tape_obj *tape = file->private_data;
 	ide_drive_t *drive = tape->drive;
-	ssize_t actually_written = 0;
+	size_t done = 0;
 	ssize_t ret = 0;
 	int rc;
 
@@ -1262,47 +1232,28 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
 	rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE);
 	if (rc < 0)
 		return rc;
-	if (count == 0)
-		return (0);
-	if (tape->valid < tape->buffer_size) {
-		actually_written = min_t(unsigned int,
-					 tape->buffer_size - tape->valid,
-					 count);
-		if (copy_from_user(tape->cur, buf, actually_written))
-			ret = -EFAULT;
-		buf += actually_written;
-		count -= actually_written;
-		tape->cur += actually_written;
-		tape->valid += actually_written;
-
-		if (tape->valid == tape->buffer_size) {
-			ssize_t retval;
-			retval = idetape_add_chrdev_write_request(drive,
-							tape->buffer_size);
-			if (retval <= 0)
-				return (retval);
-		}
-	}
-	while (count >= tape->buffer_size) {
-		ssize_t retval;
-		if (copy_from_user(tape->cur, buf, tape->buffer_size))
-			ret = -EFAULT;
-		buf += tape->buffer_size;
-		count -= tape->buffer_size;
-		retval = idetape_add_chrdev_write_request(drive,
-							  tape->buffer_size);
-		actually_written += tape->buffer_size;
-		if (retval <= 0)
-			return (retval);
-	}
-	if (count) {
-		actually_written += count;
-		if (copy_from_user(tape->cur, buf, count))
+
+	while (done < count) {
+		size_t todo;
+
+		/* flush if staging buffer is full */
+		if (tape->valid == tape->buffer_size &&
+		    idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
+					  tape->buffer_size) <= 0)
+			return rc;
+
+		/* copy in */
+		todo = min_t(size_t, count - done,
+			     tape->buffer_size - tape->valid);
+		if (copy_from_user(tape->cur, buf + done, todo))
 			ret = -EFAULT;
-		tape->cur += count;
-		tape->valid += count;
+
+		tape->cur += todo;
+		tape->valid += todo;
+		done += todo;
 	}
-	return ret ? ret : actually_written;
+
+	return ret ? ret : done;
 }
 
 static int idetape_write_filemark(ide_drive_t *drive)
-- 
1.6.0.2

[PATCH 09/10] ide-atapi: kill unused fields and callbacks

[Tejun Heo]

Impact: remove fields and code paths which are no longer necessary

Now that ide-tape uses standard mechanisms to transfer data, special
case handling for bh handling can be dropped from ide-atapi.  Drop the
followings.

* pc->cur_pos, b_count, bh and b_data
* drive->pc_update_buffers() and pc_io_buffers().

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/ide/ide-atapi.c |   17 ++++-------------
 drivers/ide/ide-tape.c  |    1 -
 include/linux/ide.h     |   12 ------------
 3 files changed, 4 insertions(+), 26 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index b9dd450..afe5a43 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -359,11 +359,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 					drive->name, rq_data_dir(pc->rq)
 						     ? "write" : "read");
 			pc->flags |= PC_FLAG_DMA_ERROR;
-		} else {
+		} else
 			pc->xferred = pc->req_xfer;
-			if (drive->pc_update_buffers)
-				drive->pc_update_buffers(drive, pc);
-		}
 		debug_log("%s: DMA finished\n", drive->name);
 	}
 
@@ -463,16 +460,11 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 		return ide_do_reset(drive);
 	}
 
-	if (drive->media == ide_tape && pc->bh)
-		done = drive->pc_io_buffers(drive, pc, bcount, write);
-	else {
-		done = min_t(unsigned int, bcount, cmd->nleft);
-		ide_pio_bytes(drive, cmd, write, done);
-	}
+	done = min_t(unsigned int, bcount, cmd->nleft);
+	ide_pio_bytes(drive, cmd, write, done);
 
-	/* Update the current position */
+	/* Update transferred byte count */
 	pc->xferred += done;
-	pc->cur_pos += done;
 
 	bcount -= done;
 
@@ -650,7 +642,6 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd)
 
 		/* We haven't transferred any data yet */
 		pc->xferred = 0;
-		pc->cur_pos = pc->buf;
 
 		valid_tf = IDE_VALID_DEVICE;
 		bcount = ((drive->media == ide_tape) ?
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 2599579..8dfc688 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -591,7 +591,6 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
 	ide_init_pc(pc);
 	put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
 	pc->c[1] = 1;
-	pc->bh = NULL;
 	pc->buf = NULL;
 	pc->buf_size = length * tape->blk_size;
 	pc->req_xfer = pc->buf_size;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 1957461..34c128f 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -362,11 +362,7 @@ struct ide_atapi_pc {
 
 	/* data buffer */
 	u8 *buf;
-	/* current buffer position */
-	u8 *cur_pos;
 	int buf_size;
-	/* missing/available data on the current buffer */
-	int b_count;
 
 	/* the corresponding request */
 	struct request *rq;
@@ -379,10 +375,6 @@ struct ide_atapi_pc {
 	 */
 	u8 pc_buf[IDE_PC_BUFFER_SIZE];
 
-	/* idetape only */
-	struct idetape_bh *bh;
-	char *b_data;
-
 	unsigned long timeout;
 };
 
@@ -595,10 +587,6 @@ struct ide_drive_s {
 	/* callback for packet commands */
 	int  (*pc_callback)(struct ide_drive_s *, int);
 
-	void (*pc_update_buffers)(struct ide_drive_s *, struct ide_atapi_pc *);
-	int  (*pc_io_buffers)(struct ide_drive_s *, struct ide_atapi_pc *,
-			      unsigned int, int);
-
 	ide_startstop_t (*irq_handler)(struct ide_drive_s *);
 
 	unsigned long atapi_flags;
-- 
1.6.0.2

[PATCH 10/10] ide: drop rq->data handling from ide_map_sg()

[Tejun Heo]

Impact: remove code path which is no longer necessary

All IDE data transfers now use rq->bio.  Simplify ide_map_sg()
accordingly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
---
 drivers/ide/ide-io.c |    6 +-----
 1 files changed, 1 insertions(+), 5 deletions(-)

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 6e3094e..a0309ea 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -248,11 +248,7 @@ void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd)
 	struct scatterlist *sg = hwif->sg_table;
 	struct request *rq = cmd->rq;
 
-	if (!rq->bio) {
-		sg_init_one(sg, rq->data, rq->data_len);
-		cmd->sg_nents = 1;
-	} else
-		cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
+	cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
 }
 EXPORT_SYMBOL_GPL(ide_map_sg);
 
-- 
1.6.0.2

Re: [GIT PATCH pata-2.6] ide: clean up ide-tape, take#2

[Bartlomiej Zolnierkiewicz]

On Sunday 19 April 2009 01:58:32 Tejun Heo wrote:
> Hello, Bartlomiej, Jens, Borislav.
> 
> Upon ack, please pull from the following git tree.
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git ide-phase2

Everything looks fine to me...  Borislav?

Re: [PATCH 06/10] ide-tape: unify r/w init paths

[Sergei Shtylyov]

Hello.

Tejun Heo wrote:

> Impact: cleanup

> Read and write init paths are almost identical.  Unify them into
> idetape_init_rw().

> Signed-off-by: Tejun Heo <tj@kernel.org>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

MBR, Sergei

Re: [PATCH 07/10] ide-tape: use byte size instead of sectors on rw issue functions

[Sergei Shtylyov]

Tejun Heo wrote:

> Impact: cleanup

> Byte size is what most issue functions deal with, make
> idetape_queue_rw_tail() and its wrappers take byte size instead of
> sector counts.  idetape_chrdev_read() and write() functions are
> converted to use tape->buffer_size instead of ctl from tape->cap.

> This cleans up code a little bit and will ease the next r/w
> reimplementation.

> Signed-off-by: Tejun Heo <tj@kernel.org>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

MBR, Sergei

[PATCH #ide-phase2] ide-dma: don't reset request fields on dma_timeout_retry()

[Tejun Heo]

Impact: drop unnecessary code

Now that everything uses bio and block operations, there is no need to
reset request fields manually when retrying a request.  Every field is
guaranteed to be always valid.  Drop unnecessary request field
resetting from ide_dma_timeout_retry().

Signed-off-by: Tejun Heo <tj@kernel.org>
---
This patch applies on top of this patchset.  I updated the #ide-phase2
git branch to include this patch.  Thanks.

 drivers/ide/ide-dma.c |   20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)

Index: block/drivers/ide/ide-dma.c
===================================================================
--- block.orig/drivers/ide/ide-dma.c
+++ block/drivers/ide/ide-dma.c
@@ -510,23 +510,11 @@ ide_startstop_t ide_dma_timeout_retry(id
 	/*
 	 * un-busy drive etc and make sure request is sane
 	 */
-
 	rq = hwif->rq;
-	if (!rq)
-		goto out;
-
-	hwif->rq = NULL;
-
-	rq->errors = 0;
-
-	if (!rq->bio)
-		goto out;
-
-	rq->sector = rq->bio->bi_sector;
-	rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9;
-	rq->hard_cur_sectors = rq->current_nr_sectors;
-	rq->buffer = bio_data(rq->bio);
-out:
+	if (rq) {
+		hwif->rq = NULL;
+		rq->errors = 0;
+	}
 	return ret;
 }
 

Re: [GIT PATCH pata-2.6] ide: clean up ide-tape, take#2

[Borislav Petkov]

On Mon, Apr 20, 2009 at 01:57:44PM +0200, Bartlomiej Zolnierkiewicz wrote:
> On Sunday 19 April 2009 01:58:32 Tejun Heo wrote:
> > Hello, Bartlomiej, Jens, Borislav.
> > 
> > Upon ack, please pull from the following git tree.
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git ide-phase2
> 
> Everything looks fine to me...  Borislav?

Yeah, thanks Tejun! I cannot do some testing wrt ide-tape hardware on my
side yet but keep your fingers crossed - this might change next week :).

-- 
Regards/Gruss,
    Boris.

Re: [PATCH #ide-phase2] ide-dma: don't reset request fields on dma_timeout_retry()

[Bartlomiej Zolnierkiewicz]

On Tuesday 21 April 2009 05:23:16 Tejun Heo wrote:
> Impact: drop unnecessary code
> 
> Now that everything uses bio and block operations, there is no need to
> reset request fields manually when retrying a request.  Every field is
> guaranteed to be always valid.  Drop unnecessary request field
> resetting from ide_dma_timeout_retry().

Yep.

> Signed-off-by: Tejun Heo <tj@kernel.org>
> ---
> This patch applies on top of this patchset.  I updated the #ide-phase2
> git branch to include this patch.  Thanks.

I pulled ide-phase2 into ide-2.6/for-next.

Thanks a lot for this work!

Re: [PATCH #ide-phase2] ide-dma: don't reset request fields on dma_timeout_retry()

[Tejun Heo]

Bartlomiej Zolnierkiewicz wrote:
> I pulled ide-phase2 into ide-2.6/for-next.

Cool, thanks.  :-)

-- 
tejun