Re: [PATCH 4/4] ide: preserve Host Protected Area by default

[Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>]

On Sunday 31 May 2009 16:39:39 Bartlomiej Zolnierkiewicz wrote:
> From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Subject: [PATCH] ide: preserve Host Protected Area by default
> 
> From the perspective of most users of recent systems, disabling Host
> Protected Area (HPA) can break vendor RAID formats, GPT partitions and
> risks corrupting firmware or overwriting vendor system recovery tools.
> 
> Unfortunately the original (kernels < 2.6.30) behavior (unconditionally
> disabling HPA and using full disk capacity) was introduced at the time
> when the main use of HPA was to make the drive look small enough for the
> BIOS to allow the system to boot with large capacity drives.
> 
> Thus to allow the maximum compatibility with the existing setups (using
> HPA and partitioned with HPA disabled) we automatically disable HPA if
> any partitions overlapping HPA are detected.  Additionally HPA can also
> be disabled using the "nohpa" module parameter (i.e. "ide_core.nohpa=0.0"
> to disable HPA on /dev/hda).
> 
> While at it:
> - remove stale "idebus=" entry from Documentation/kernel-parameters.txt
> 
> Cc: Robert Hancock <hancockrwd@gmail.com>
> Cc: Frans Pop <elendil@planet.nl>
> Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl>
> Cc: Al Viro <viro@zeniv.linux.org.uk>
> [patch description was based on input from Alan Cox and Frans Pop]
> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

v2 interdiff

v2:
Fix ->resume HPA support.
---
 ide-disk.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff -u b/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
--- b/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -433,8 +433,11 @@
 		goto out;
 
 	set = ide_disk_hpa_set_capacity(drive, set, lba48);
-	if (set)
+	if (set) {
+		/* needed for ->resume to disable HPA */
+		drive->dev_flags |= IDE_DFLAG_NOHPA;
 		return set;
+	}
 out:
 	return drive->capacity64;
 }