From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrey Gusev Subject: Re: Delay on intialization ide subsystem(most likely) Date: Mon, 13 Jul 2009 23:27:21 +0400 Message-ID: <20090713232721.04e3a80b@power-debian> References: <20090425170203.74603b9c@power-debian> <200906101344.30057.bzolnier@gmail.com> <20090705151754.6034ffad@power-debian> <200907061704.38539.bzolnier@gmail.com> <1246922623.22625.57.camel@pasglop> <20090708011802.74a7c21b@power-debian> <1247015562.6066.59.camel@pasglop> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: Received: from mx75.mail.ru ([94.100.176.90]:62584 "EHLO mx75.mail.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751161AbZGMT1Y (ORCPT ); Mon, 13 Jul 2009 15:27:24 -0400 In-Reply-To: <1247015562.6066.59.camel@pasglop> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Benjamin Herrenschmidt Cc: Bartlomiej Zolnierkiewicz , linux-ide@vger.kernel.org, petkovbb@gmail.com, linuxppc-dev@ozlabs.org, David Miller On Wed, 08 Jul 2009 11:12:42 +1000 Benjamin Herrenschmidt wrote: > On Wed, 2009-07-08 at 01:18 +0400, Andrey Gusev wrote: > > > I tried this drive on ide1 and ide2, there are same issue. This > > drive worked on P-III before (as separate on channel, with another > > hard drive and with cdrom) and I didn't have any problem with it. > > There are chunks of dmesg. > > Wow... It also fails with MWDMA2 ! That's just plain weird. It fails > as master as well as slave too. Hrm. I wonder if it could be your > cable... Do you have other machines (non-powermac) you can try that > drive again just in case it toast itself in some way too ? It couldn't be cable, because all tests were on different cables. Unfortunately, I don't have another machine. I try find one, but it wouldn't be fast. This drive used early and I didn't have any problems. It was unused some time and may be something happened with it. Note, it was slave only with another hard disk, in other cases it was master (single on cable). > > Bart, I don't suppose we know of any problem with those drive models ? > (Q. FireballP LM20.5) > > Cheers, > Ben. > >