From: "Davíð Steinn Geirsson" <david@dsg.to>
To: Tejun Heo <tj@kernel.org>
Cc: linux-ide@vger.kernel.org
Subject: Re: HighPoint RocketRAID 2320
Date: Tue, 4 Aug 2009 17:48:52 +0000 [thread overview]
Message-ID: <20090804174852.GH13863@dsg.to> (raw)
In-Reply-To: <4A7821AF.9010609@kernel.org>
[-- Attachment #1.1: Type: text/plain, Size: 296 bytes --]
Hi Tejun,
I tried this and attach a dmesg output. The result was the same.
Kind regards,
David
On Tue, Aug 04, 2009 at 08:55:27PM +0900, Tejun Heo wrote:
> Hello,
>
> What happens if you specify "libata.force=noncq"?
>
> --
> tejun
--
Davíð Steinn Geirsson
david@dsg.to
[-- Attachment #1.2: sata_mv-dmesg.noncq.log --]
[-- Type: text/plain, Size: 60716 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-btrfsnewformat2 (2.6.30) (root@slimer) (gcc version 4.3.3 (Debian 4.3.3-15) ) #3 SMP Mon Aug 3 18:09:53 GMT 2009
[ 0.000000] Command line: root=/dev/mapper/slimerroot-root ro libata.force=noncq
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffc0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cffce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffce000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001b0000000 aka 6912M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcffc0 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cffc0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cffc0000 page 4k
[ 0.000000] kernel direct mapping tables up to cffc0000 @ 10000-16000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000
[ 0.000000] 0100000000 - 01b0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1b0000000 @ 14000-1c000
[ 0.000000] RAMDISK: 37753000 - 37fef542
[ 0.000000] ACPI: RSDP 00000000000fb800 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cffc0100 00054 (v01 A_M_I_ OEMXSDT 09000710 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffc0290 000F4 (v03 A_M_I_ OEMFACP 09000710 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cffc05c0 051BD (v01 A0653 A0653000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 00000000cffce000 00040
[ 0.000000] ACPI: APIC 00000000cffc0390 00070 (v01 A_M_I_ OEMAPIC 09000710 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffc0400 0003C (v01 A_M_I_ OEMMCFG 09000710 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffce040 00060 (v01 A_M_I_ AMI_OEM 09000710 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cffc5780 00038 (v01 A_M_I_ OEMHPET0 09000710 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffc57c0 00248 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001b0000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001b0000000
[ 0.000000] NODE_DATA [0000000000017000 - 000000000001efff]
[ 0.000000] bootmap [000000000001f000 - 0000000000054fff] pages 36
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01b0000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007d38cc] TEXT DATA BSS ==> [0000200000 - 00007d38cc]
[ 0.000000] #3 [0037753000 - 0037fef542] RAMDISK ==> [0037753000 - 0037fef542]
[ 0.000000] #4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
[ 0.000000] #5 [00007d4000 - 00007d4290] BRK ==> [00007d4000 - 00007d4290]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #7 [0000014000 - 0000017000] PGTABLE ==> [0000014000 - 0000017000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffe20000000000-ffffe20005ffffff] PMD -> [ffff880028200000-ffff88002d7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000cffc0
[ 0.000000] 0: 0x00100000 -> 0x001b0000
[ 0.000000] On node 0 totalpages: 1572683
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1601 pages reserved
[ 0.000000] DMA zone: 2322 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833528 pages, LIFO batch:31
[ 0.000000] Normal zone: 9856 pages used for memmap
[ 0.000000] Normal zone: 711040 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cffce000
[ 0.000000] PM: Registered nosave memory: 00000000cffce000 - 00000000cfff0000
[ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff780000
[ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages at ffff880028034000, static data 76256 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1546890
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/slimerroot-root ro libata.force=noncq
[ 0.000000] Unknown boot option `libata.force=noncq': ignoring
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2411.163 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 20000000 size 32 MB
[ 0.004000] Aperture pointing to e820 RAM. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.004000] Memory: 6121788k/7077888k available (2784k kernel code, 787156k absent, 168944k reserved, 1376k data, 560k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4822.32 BogoMIPS (lpj=9644652)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006475] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009158] Mount-cache hash table entries: 256
[ 0.009376] Initializing cgroup subsys ns
[ 0.009426] Initializing cgroup subsys cpuacct
[ 0.009477] Initializing cgroup subsys devices
[ 0.009527] Initializing cgroup subsys freezer
[ 0.009579] Initializing cgroup subsys net_cls
[ 0.009658] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.009713] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.009763] CPU 0/0x0 -> Node 0
[ 0.009810] tseg: 0000000000
[ 0.009822] CPU: Physical Processor ID: 0
[ 0.009870] CPU: Processor Core ID: 0
[ 0.009925] using C1E aware idle routine
[ 0.010589] ACPI: Core revision 20090320
[ 0.017436] Setting APIC routing to flat
[ 0.017939] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.024001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.024001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.024001] ..... (found apic 0 pin 0) ...
[ 0.065540] ....... works.
[ 0.065586] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4821.86 BogoMIPS (lpj=9643728)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.152423] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 0.152949] Brought up 2 CPUs
[ 0.152998] Total of 2 processors activated (9644.19 BogoMIPS).
[ 0.153153] CPU0 attaching sched-domain:
[ 0.153156] domain 0: span 0-1 level MC
[ 0.153158] groups: 0 1
[ 0.153163] CPU1 attaching sched-domain:
[ 0.153164] domain 0: span 0-1 level MC
[ 0.153167] groups: 1 0
[ 0.153223] net_namespace: 1936 bytes
[ 0.153223] Booting paravirtualized kernel on bare hardware
[ 0.153223] regulator: core version 0.5
[ 0.153223] NET: Registered protocol family 16
[ 0.153223] node 0 link 0: io port [1000, ffffff]
[ 0.153223] TOM: 00000000d0000000 aka 3328M
[ 0.153223] node 0 link 0: mmio [e0000000, efffffff]
[ 0.153223] node 0 link 0: mmio [a0000, bffff]
[ 0.153223] node 0 link 0: mmio [d0000000, fe0bffff]
[ 0.153223] TOM2: 00000001b0000000 aka 6912M
[ 0.153223] bus: [00,ff] on node 0 link 0
[ 0.153223] bus: 00 index 0 io port: [0, ffff]
[ 0.153223] bus: 00 index 1 mmio: [d0000000, ffffffff]
[ 0.153223] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.153223] bus: 00 index 3 mmio: [1b0000000, fcffffffff]
[ 0.153223] ACPI: bus type pci registered
[ 0.153223] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.153223] PCI: Not using MMCONFIG.
[ 0.153223] PCI: Using configuration type 1 for base access
[ 0.156109] bio: create slab <bio-0> at 0
[ 0.156635] ACPI: EC: Look up EC in DSDT
[ 0.168770] ACPI: Interpreter enabled
[ 0.168821] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.169024] ACPI: Using IOAPIC for interrupt routing
[ 0.169127] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.175613] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.186075] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.196166] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - E5, should be D8 [20090320]
[ 0.196308] ACPI: No dock devices found.
[ 0.196420] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.196501] pci 0000:00:01.1: reg 10 io port: [0xbc00-0xbc3f]
[ 0.196501] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
[ 0.196501] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
[ 0.196501] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.196501] pci 0000:00:01.1: PME# disabled
[ 0.196501] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfbff000-0xdfbfffff]
[ 0.196501] pci 0000:00:02.0: supports D1 D2
[ 0.196501] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196501] pci 0000:00:02.0: PME# disabled
[ 0.196504] pci 0000:00:02.1: reg 10 32bit mmio: [0xdfbfec00-0xdfbfecff]
[ 0.196528] pci 0000:00:02.1: supports D1 D2
[ 0.196530] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196584] pci 0000:00:02.1: PME# disabled
[ 0.196687] pci 0000:00:05.0: reg 10 32bit mmio: [0xdfbf8000-0xdfbfbfff]
[ 0.196710] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.196764] pci 0000:00:05.0: PME# disabled
[ 0.196842] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.196875] pci 0000:00:07.0: reg 10 32bit mmio: [0xdfbfd000-0xdfbfdfff]
[ 0.196879] pci 0000:00:07.0: reg 14 io port: [0xb480-0xb487]
[ 0.196898] pci 0000:00:07.0: supports D1 D2
[ 0.196900] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196956] pci 0000:00:07.0: PME# disabled
[ 0.197023] pci 0000:00:08.0: reg 10 io port: [0xb400-0xb407]
[ 0.197027] pci 0000:00:08.0: reg 14 io port: [0xb080-0xb083]
[ 0.197030] pci 0000:00:08.0: reg 18 io port: [0xb000-0xb007]
[ 0.197033] pci 0000:00:08.0: reg 1c io port: [0xac00-0xac03]
[ 0.197037] pci 0000:00:08.0: reg 20 io port: [0xa880-0xa88f]
[ 0.197040] pci 0000:00:08.0: reg 24 32bit mmio: [0xdfbfc000-0xdfbfcfff]
[ 0.197068] pci 0000:00:08.1: reg 10 io port: [0xa800-0xa807]
[ 0.197071] pci 0000:00:08.1: reg 14 io port: [0xa480-0xa483]
[ 0.197074] pci 0000:00:08.1: reg 18 io port: [0xa400-0xa407]
[ 0.197078] pci 0000:00:08.1: reg 1c io port: [0xa080-0xa083]
[ 0.197081] pci 0000:00:08.1: reg 20 io port: [0xa000-0xa00f]
[ 0.197084] pci 0000:00:08.1: reg 24 32bit mmio: [0xdfbf3000-0xdfbf3fff]
[ 0.197126] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.197180] pci 0000:00:09.0: PME# disabled
[ 0.197254] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.197308] pci 0000:00:0b.0: PME# disabled
[ 0.197382] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.197436] pci 0000:00:0c.0: PME# disabled
[ 0.197578] pci 0000:01:03.0: reg 10 32bit mmio: [0xdfcff800-0xdfcfffff]
[ 0.197584] pci 0000:01:03.0: reg 14 io port: [0xcc00-0xcc7f]
[ 0.197613] pci 0000:01:03.0: supports D2
[ 0.197614] pci 0000:01:03.0: PME# supported from D2 D3hot D3cold
[ 0.197669] pci 0000:01:03.0: PME# disabled
[ 0.197745] pci 0000:01:0a.0: reg 10 32bit mmio: [0xdfc00000-0xdfc7ffff]
[ 0.197751] pci 0000:01:0a.0: reg 14 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.197768] pci 0000:01:0a.0: reg 30 32bit mmio: [0xdfce0000-0xdfceffff]
[ 0.197780] pci 0000:01:0a.0: supports D1 D2
[ 0.197803] pci 0000:00:04.0: transparent bridge
[ 0.197854] pci 0000:00:04.0: bridge io port: [0xc000-0xcfff]
[ 0.197857] pci 0000:00:04.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
[ 0.197860] pci 0000:00:04.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.197893] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.197947] pci 0000:02:00.0: PME# disabled
[ 0.198033] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
[ 0.198087] pci 0000:02:00.2: PME# disabled
[ 0.198172] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
[ 0.198174] pci 0000:00:09.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.198250] pci 0000:04:04.0: reg 10 64bit mmio: [0xdfe00000-0xdfefffff]
[ 0.198255] pci 0000:04:04.0: reg 18 io port: [0xd800-0xd8ff]
[ 0.198316] pci 0000:02:00.2: bridge io port: [0xd000-0xdfff]
[ 0.198320] pci 0000:02:00.2: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.198376] pci 0000:05:00.0: reg 10 32bit mmio: [0xdffe0000-0xdfffffff]
[ 0.198385] pci 0000:05:00.0: reg 14 32bit mmio: [0xdffc0000-0xdffdffff]
[ 0.198394] pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f]
[ 0.198421] pci 0000:05:00.0: reg 30 32bit mmio: [0xdffa0000-0xdffbffff]
[ 0.198458] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.200015] pci 0000:05:00.0: PME# disabled
[ 0.200109] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff]
[ 0.200112] pci 0000:00:0b.0: bridge 32bit mmio: [0xdff00000-0xdfffffff]
[ 0.200156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.200321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.200436] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.200500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.200563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.208275] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.208680] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.209160] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[ 0.209614] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.210096] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.210576] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 0.211028] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.212287] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
[ 0.212737] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[ 0.213187] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 0.213637] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 0.214095] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.214548] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.215029] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.215744] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.216218] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.216702] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[ 0.217154] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
[ 0.217649] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.217963] usbcore: registered new interface driver usbfs
[ 0.217963] usbcore: registered new interface driver hub
[ 0.217963] usbcore: registered new device driver usb
[ 0.217963] PCI: Using ACPI for IRQ routing
[ 0.228130] PCI-DMA: Disabling AGP.
[ 0.228251] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.228251] PCI-DMA: using GART IOMMU.
[ 0.228251] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.228649] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.228811] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.236011] Switched to high resolution mode on CPU 0
[ 0.236349] Switched to high resolution mode on CPU 1
[ 0.240012] pnp: PnP ACPI init
[ 0.240075] ACPI: bus type pnp registered
[ 0.247756] pnp: PnP ACPI: found 15 devices
[ 0.247806] ACPI: ACPI bus type pnp unregistered
[ 0.247866] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.247920] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.247978] system 00:07: ioport range 0x500-0x57f has been reserved
[ 0.248044] system 00:07: ioport range 0x580-0x5ff has been reserved
[ 0.248098] system 00:07: ioport range 0x800-0x87f could not be reserved
[ 0.248153] system 00:07: ioport range 0x880-0x8ff has been reserved
[ 0.248207] system 00:07: ioport range 0xd00-0xd7f has been reserved
[ 0.248265] system 00:07: ioport range 0xd80-0xdff has been reserved
[ 0.248319] system 00:07: ioport range 0x2000-0x207f has been reserved
[ 0.248373] system 00:07: ioport range 0x2080-0x20ff has been reserved
[ 0.248428] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.248487] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 0.248543] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.248598] system 00:07: iomem range 0xffb80000-0xffffffff has been reserved
[ 0.248656] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.248712] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.248774] system 00:0b: ioport range 0x230-0x23f has been reserved
[ 0.248828] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.248882] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 0.248936] system 00:0b: ioport range 0xa10-0xa1f has been reserved
[ 0.248996] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.249061] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.249115] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.249170] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.249225] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.249296] system 00:0e: iomem range 0xff780000-0xffffffff could not be reserved
[ 0.254388] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.254441] pci 0000:00:04.0: IO window: 0xc000-0xcfff
[ 0.254494] pci 0000:00:04.0: MEM window: 0xdfc00000-0xdfcfffff
[ 0.254550] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 0.254621] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 0.254675] pci 0000:02:00.0: IO window: disabled
[ 0.254727] pci 0000:02:00.0: MEM window: disabled
[ 0.254778] pci 0000:02:00.0: PREFETCH window: disabled
[ 0.254835] pci 0000:02:00.2: PCI bridge, secondary bus 0000:04
[ 0.254888] pci 0000:02:00.2: IO window: 0xd000-0xdfff
[ 0.254941] pci 0000:02:00.2: MEM window: 0xdfd00000-0xdfefffff
[ 0.254994] pci 0000:02:00.2: PREFETCH window: disabled
[ 0.255048] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.255100] pci 0000:00:09.0: IO window: 0xd000-0xdfff
[ 0.255152] pci 0000:00:09.0: MEM window: 0xdfd00000-0xdfefffff
[ 0.255205] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.255258] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:05
[ 0.255310] pci 0000:00:0b.0: IO window: 0xe000-0xefff
[ 0.255362] pci 0000:00:0b.0: MEM window: 0xdff00000-0xdfffffff
[ 0.255415] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.255468] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:06
[ 0.255520] pci 0000:00:0c.0: IO window: disabled
[ 0.255571] pci 0000:00:0c.0: MEM window: disabled
[ 0.255622] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.255678] pci 0000:00:04.0: setting latency timer to 64
[ 0.255683] pci 0000:00:09.0: setting latency timer to 64
[ 0.255688] pci 0000:02:00.0: setting latency timer to 64
[ 0.255693] pci 0000:02:00.2: setting latency timer to 64
[ 0.255698] pci 0000:00:0b.0: setting latency timer to 64
[ 0.255701] pci 0000:00:0c.0: setting latency timer to 64
[ 0.255705] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.255707] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.255710] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.255712] pci_bus 0000:01: resource 1 mem: [0xdfc00000-0xdfcfffff]
[ 0.255714] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[ 0.255717] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.255719] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.255722] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.255724] pci_bus 0000:02: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.255727] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.255729] pci_bus 0000:04: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.255732] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.255734] pci_bus 0000:05: resource 1 mem: [0xdff00000-0xdfffffff]
[ 0.255832] NET: Registered protocol family 2
[ 0.284276] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.286848] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.292093] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.292780] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.292835] TCP reno registered
[ 0.300125] NET: Registered protocol family 1
[ 0.300231] Trying to unpack rootfs image as initramfs...
[ 0.495569] Freeing initrd memory: 8817k freed
[ 0.502380] audit: initializing netlink socket (disabled)
[ 0.502444] type=2000 audit(1249407343.500:1): initialized
[ 0.502998] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.503214] VFS: Disk quotas dquot_6.5.2
[ 0.503303] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.503418] msgmni has been set to 11973
[ 0.503663] alg: No test for stdrng (krng)
[ 0.503784] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.503854] io scheduler noop registered
[ 0.503903] io scheduler anticipatory registered
[ 0.503956] io scheduler deadline registered
[ 0.504049] io scheduler cfq registered (default)
[ 1.028329] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.028424] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.028528] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.028632] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.028734] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.028840] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.028950] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.029068] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.029131] pci 0000:01:0a.0: Boot video device
[ 1.029320] alloc irq_desc for 24 on cpu 0 node 0
[ 1.029322] alloc kstat_irqs on cpu 0 node 0
[ 1.029330] pcieport-driver 0000:00:09.0: irq 24 for MSI/MSI-X
[ 1.029336] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 1.029504] alloc irq_desc for 25 on cpu 0 node 0
[ 1.029506] alloc kstat_irqs on cpu 0 node 0
[ 1.029510] pcieport-driver 0000:00:0b.0: irq 25 for MSI/MSI-X
[ 1.029516] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.029674] alloc irq_desc for 26 on cpu 0 node 0
[ 1.029676] alloc kstat_irqs on cpu 0 node 0
[ 1.029681] pcieport-driver 0000:00:0c.0: irq 26 for MSI/MSI-X
[ 1.029686] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.034026] Linux agpgart interface v0.103
[ 1.034080] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.034254] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.034733] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.036651] brd: module loaded
[ 1.036778] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.037125] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.037178] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.037403] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.037601] mice: PS/2 mouse device common for all mice
[ 1.037716] rtc_cmos 00:02: RTC can wake from S4
[ 1.037824] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.037913] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.037997] cpuidle: using governor ladder
[ 1.038046] cpuidle: using governor menu
[ 1.038098] No iBFT detected.
[ 1.038481] TCP cubic registered
[ 1.038621] NET: Registered protocol family 10
[ 1.039141] lo: Disabled Privacy Extensions
[ 1.039468] Mobile IPv6
[ 1.039515] NET: Registered protocol family 17
[ 1.039716] registered taskstats version 1
[ 1.039956] rtc_cmos 00:02: setting system clock to 2009-08-04 17:35:44 UTC (1249407344)
[ 1.045133] Freeing unused kernel memory: 560k freed
[ 1.045433] Write protecting the kernel read-only data: 3772k
[ 1.055480] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.178276] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
[ 1.178345] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.179073] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[ 1.179133] alloc irq_desc for 19 on cpu 0 node 0
[ 1.179135] alloc kstat_irqs on cpu 0 node 0
[ 1.179146] e1000e 0000:05:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
[ 1.179224] e1000e 0000:05:00.0: setting latency timer to 64
[ 1.179376] alloc irq_desc for 27 on cpu 0 node 0
[ 1.179378] alloc kstat_irqs on cpu 0 node 0
[ 1.179391] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 1.191219] Uniform Multi-Platform E-IDE driver
[ 1.195076] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.195486] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 1.195541] alloc irq_desc for 23 on cpu 0 node 0
[ 1.195543] alloc kstat_irqs on cpu 0 node 0
[ 1.195554] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[ 1.195628] forcedeth 0000:00:07.0: setting latency timer to 64
[ 1.199936] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.240648] FDC 0 is a post-1991 82077
[ 1.246685] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
[ 1.246743] alloc irq_desc for 18 on cpu 0 node 0
[ 1.246745] alloc kstat_irqs on cpu 0 node 0
[ 1.246756] firewire_ohci 0000:01:03.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
[ 1.328043] firewire_ohci: Added fw-ohci device 0000:01:03.0, OHCI version 1.10
[ 1.363233] 0000:05:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:17:24:85:7a
[ 1.363309] 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.363435] 0000:05:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50855-002
[ 1.365166] udev: renamed network interface eth0 to eth1
[ 1.712861] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:18:f3:aa:18:da
[ 1.712939] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.714139] amd74xx 0000:00:06.0: UDMA133 controller
[ 1.714193] amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2)
[ 1.714263] amd74xx 0000:00:06.0: IDE port disabled
[ 1.714322] amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround.
[ 1.714399] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
[ 1.714456] ide0: BM-DMA at 0xffa0-0xffa7
[ 1.714510] Probing IDE interface ide0...
[ 1.825080] firewire_core: created device fw0: GUID 0011d80000f46d61, S400
[ 2.000115] hda: WDC WD1600JB-00GVA0, ATA DISK drive
[ 2.672053] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.673288] hda: UDMA/100 mode selected
[ 2.674643] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.696045] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 2.696099] alloc irq_desc for 22 on cpu 0 node 0
[ 2.696101] alloc kstat_irqs on cpu 0 node 0
[ 2.696111] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 2.696214] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 2.696217] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 2.696359] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 2.696458] ehci_hcd 0000:00:02.1: debug port 1
[ 2.696509] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 2.696530] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdfbfec00
[ 2.708011] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 2.708083] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.708137] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.708206] usb usb1: Product: EHCI Host Controller
[ 2.708256] usb usb1: Manufacturer: Linux 2.6.30-btrfsnewformat2 ehci_hcd
[ 2.708310] usb usb1: SerialNumber: 0000:00:02.1
[ 2.708409] usb usb1: configuration #1 chosen from 1 choice
[ 2.708491] hub 1-0:1.0: USB hub found
[ 2.708547] hub 1-0:1.0: 10 ports detected
[ 2.722978] SCSI subsystem initialized
[ 2.737210] libata version 3.00 loaded.
[ 2.740913] sata_nv 0000:00:08.0: version 3.5
[ 2.741263] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 2.741323] alloc irq_desc for 21 on cpu 0 node 0
[ 2.741325] alloc kstat_irqs on cpu 0 node 0
[ 2.741336] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[ 2.741484] sata_nv 0000:00:08.0: setting latency timer to 64
[ 2.742709] scsi0 : sata_nv
[ 2.742981] scsi1 : sata_nv
[ 2.743206] ata1: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 21
[ 2.743262] ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 21
[ 2.743766] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[ 2.743821] alloc irq_desc for 20 on cpu 0 node 0
[ 2.743823] alloc kstat_irqs on cpu 0 node 0
[ 2.743832] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
[ 2.743957] sata_nv 0000:00:08.1: setting latency timer to 64
[ 2.744037] scsi2 : sata_nv
[ 2.744243] scsi3 : sata_nv
[ 2.744505] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa000 irq 20
[ 2.744564] ata4: SATA max UDMA/133 cmd 0xa400 ctl 0xa080 bmdma 0xa008 irq 20
[ 2.806937] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.807583] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 2.807639] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 2.807743] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.807746] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.807877] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.807977] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdfbff000
[ 2.866021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.866078] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.866148] usb usb2: Product: OHCI Host Controller
[ 2.866199] usb usb2: Manufacturer: Linux 2.6.30-btrfsnewformat2 ohci_hcd
[ 2.866253] usb usb2: SerialNumber: 0000:00:02.0
[ 2.866376] usb usb2: configuration #1 chosen from 1 choice
[ 2.866461] hub 2-0:1.0: USB hub found
[ 2.866517] hub 2-0:1.0: 10 ports detected
[ 3.208032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.216114] ata1.00: FORCE: horkage modified (noncq)
[ 3.217512] ata1.00: ATA-6: WDC WD1600JD-00GBB0, 02.05D02, max UDMA/100
[ 3.217570] ata1.00: 312581808 sectors, multi 16: LBA48
[ 3.217633] ata1.00: applying bridge limits
[ 3.233445] ata1.00: configured for UDMA/100
[ 3.233588] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JD-00G 02.0 PQ: 0 ANSI: 5
[ 3.700032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.708114] ata2.00: FORCE: horkage modified (noncq)
[ 3.708167] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100
[ 3.724126] ata2.00: configured for UDMA/100
[ 3.725643] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5
[ 4.049150] Driver 'sd' needs updating - please use bus_type methods
[ 4.049340] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 4.049424] sd 0:0:0:0: [sda] Write Protect is off
[ 4.049479] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.049498] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.049654] sda:<6>ide-gd driver 1.18
[ 4.054468] hda: max request size: 512KiB
[ 4.065415] sda1 sda2 sda3
[ 4.088453] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.090795] Driver 'sr' needs updating - please use bus_type methods
[ 4.094230] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.094306] Uniform CD-ROM driver Revision: 3.20
[ 4.094464] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.102760] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 4.104083] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.104166] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.104822] hda: cache flushes supported
[ 4.104933] hda: hda1 hda2 hda3
[ 4.605632] md: raid1 personality registered for level 1
[ 4.607214] xor: automatically using best checksumming function: generic_sse
[ 4.625008] generic_sse: 7436.000 MB/sec
[ 4.625057] xor: using function: generic_sse (7436.000 MB/sec)
[ 4.625617] async_tx: api initialized (async)
[ 4.693013] raid6: int64x1 2222 MB/s
[ 4.761016] raid6: int64x2 2870 MB/s
[ 4.829012] raid6: int64x4 2230 MB/s
[ 4.897018] raid6: int64x8 2010 MB/s
[ 4.965057] raid6: sse2x1 1211 MB/s
[ 5.033022] raid6: sse2x2 1930 MB/s
[ 5.101014] raid6: sse2x4 3255 MB/s
[ 5.101062] raid6: using algorithm sse2x4 (3255 MB/s)
[ 5.103980] md: raid6 personality registered for level 6
[ 5.104053] md: raid5 personality registered for level 5
[ 5.104104] md: raid4 personality registered for level 4
[ 5.236876] md: md0 stopped.
[ 5.285929] md: bind<hda1>
[ 5.286165] md: bind<sda1>
[ 5.287435] raid1: raid set md0 active with 2 out of 2 mirrors
[ 5.292114] md0: unknown partition table
[ 5.377931] md: md1 stopped.
[ 5.379632] md: bind<hda2>
[ 5.379849] md: bind<sda2>
[ 5.381160] raid1: raid set md1 active with 2 out of 2 mirrors
[ 5.386213] md1: unknown partition table
[ 5.416697] device-mapper: uevent: version 1.0.3
[ 5.416988] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.581636] PM: Starting manual resume from disk
[ 5.631654] kjournald starting. Commit interval 5 seconds
[ 5.631721] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.924171] udev: starting version 141
[ 7.260210] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 7.260291] ACPI: Power Button [PWRF]
[ 7.260421] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 7.260497] ACPI: Power Button [PWRB]
[ 7.411992] parport_pc 00:06: reported by Plug and Play ACPI
[ 7.412092] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.671928] processor ACPI_CPU:00: registered as cooling_device0
[ 7.672208] processor ACPI_CPU:01: registered as cooling_device1
[ 7.678417] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 7.680832] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.681649] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 7.707732] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
[ 7.707804] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
[ 7.799253] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.983486] Error: Driver 'pcspkr' is already registered, aborting...
[ 7.993187] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 7.993248] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 7.993491] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 8.733659] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
[ 8.733829] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
[ 11.577501] Adding 3943948k swap on /dev/sda3. Priority:-1 extents:1 across:3943948k
[ 11.608892] Adding 3943948k swap on /dev/hda3. Priority:-2 extents:1 across:3943948k
[ 11.825826] EXT3 FS on dm-0, internal journal
[ 11.987684] loop: module loaded
[ 12.925788] kjournald starting. Commit interval 5 seconds
[ 12.932058] EXT3 FS on md0, internal journal
[ 12.932140] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.055377] EXT4-fs: barriers enabled
[ 13.072066] kjournald2 starting: pid 2340, dev dm-3:8, commit interval 5 seconds
[ 13.104302] EXT4 FS on dm-3, internal journal on dm-3:8
[ 13.104356] EXT4-fs: delayed allocation enabled
[ 13.104406] EXT4-fs: file extents enabled
[ 13.105731] EXT4-fs: mballoc enabled
[ 13.105793] EXT4-fs: mounted filesystem dm-3 with ordered data mode
[ 14.394009] Bridge firewalling registered
[ 14.424253] device eth1 entered promiscuous mode
[ 14.568393] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 14.625097] e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
[ 14.626838] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.903464] Loading iSCSI transport class v2.0-870.
[ 17.941732] iscsi: registered transport (tcp)
[ 18.003224] iscsi: registered transport (iser)
[ 18.570140] RPC: Registered udp transport module.
[ 18.570210] RPC: Registered tcp transport module.
[ 18.633920] Slow work thread pool: Starting up
[ 18.634324] Slow work thread pool: Ready
[ 18.634425] FS-Cache: Loaded
[ 18.674523] FS-Cache: Netfs 'nfs' registered for caching
[ 18.703198] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 24.788010] br0: no IPv6 routers present
[ 27.404008] torbr: no IPv6 routers present
[ 81.917171] virbr1: starting userspace STP failed, starting kernel STP
[ 81.957399] svc: failed to register lockdv1 RPC service (errno 97).
[ 81.957930] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 81.969553] NFSD: starting 90-second grace period
[ 82.068055] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 83.829202] tun: Universal TUN/TAP device driver, 1.6
[ 83.829257] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 83.831955] device vnet0 entered promiscuous mode
[ 83.833678] br0: port 2(vnet0) entering learning state
[ 84.035664] br0: port 2(vnet0) entering disabled state
[ 84.050346] device vnet0 left promiscuous mode
[ 84.050401] br0: port 2(vnet0) entering disabled state
[ 84.214363] lo: Disabled Privacy Extensions
[ 92.108011] virbr1: no IPv6 routers present
[ 105.019642] sata_mv 0000:04:04.0: version 1.28
[ 105.020160] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
[ 105.020218] alloc irq_desc for 17 on cpu 0 node 0
[ 105.020220] alloc kstat_irqs on cpu 0 node 0
[ 105.020231] sata_mv 0000:04:04.0: PCI INT A -> Link[LNED] -> GSI 17 (level, low) -> IRQ 17
[ 105.020523] sata_mv 0000:04:04.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
[ 105.021680] scsi4 : sata_mv
[ 105.022203] scsi5 : sata_mv
[ 105.023376] scsi6 : sata_mv
[ 105.023569] scsi7 : sata_mv
[ 105.023806] scsi8 : sata_mv
[ 105.024133] scsi9 : sata_mv
[ 105.024585] scsi10 : sata_mv
[ 105.024730] scsi11 : sata_mv
[ 105.024820] ata5: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe22000 irq 17
[ 105.024891] ata6: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe24000 irq 17
[ 105.024963] ata7: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe26000 irq 17
[ 105.025035] ata8: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe28000 irq 17
[ 105.025107] ata9: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe32000 irq 17
[ 105.025178] ata10: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe34000 irq 17
[ 105.025248] ata11: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe36000 irq 17
[ 105.025319] ata12: SATA max UDMA/133 mmio m1048576@0xdfe00000 port 0xdfe38000 irq 17
[ 105.500041] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 105.508246] ata5.00: FORCE: horkage modified (noncq)
[ 105.532049] ata5.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
[ 105.532106] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 105.556062] ata5.00: configured for UDMA/133
[ 105.556190] scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[ 105.556398] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 105.556523] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 105.556604] sd 4:0:0:0: [sdb] Write Protect is off
[ 105.556656] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 105.556675] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 105.556835] sdb:<6>ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 106.048053] ata6.00: FORCE: horkage modified (noncq)
[ 106.072048] ata6.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 106.072105] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 106.104063] ata6.00: configured for UDMA/133
[ 106.104199] scsi 5:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 106.104412] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 106.104540] sd 5:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 106.104621] sd 5:0:0:0: [sdc] Write Protect is off
[ 106.104672] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 106.104690] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 106.104850] sdc:<6>ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 106.596052] ata7.00: FORCE: horkage modified (noncq)
[ 106.620048] ata7.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 106.620103] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 106.653060] ata7.00: configured for UDMA/133
[ 106.653183] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 106.653385] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 106.653510] sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 106.653596] sd 6:0:0:0: [sdd] Write Protect is off
[ 106.653647] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 106.653665] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 106.653826] sdd:<6>ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 107.144053] ata8.00: FORCE: horkage modified (noncq)
[ 107.176048] ata8.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 107.176103] ata8.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 107.208062] ata8.00: configured for UDMA/133
[ 107.208198] scsi 7:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 107.208402] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 107.208528] sd 7:0:0:0: [sde] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 107.213696] sd 7:0:0:0: [sde] Write Protect is off
[ 107.213747] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 107.213765] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 107.213928] sde:<6>ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 107.704053] ata9.00: FORCE: horkage modified (noncq)
[ 107.704107] ata9.00: ATA-7: WDC WD5000AAKS-65TMA0, 12.01C01, max UDMA/133
[ 107.704162] ata9.00: 976773168 sectors, multi 0: LBA48 NCQ (not used)
[ 107.728068] ata9.00: configured for UDMA/133
[ 107.728205] scsi 8:0:0:0: Direct-Access ATA WDC WD5000AAKS-6 12.0 PQ: 0 ANSI: 5
[ 107.728411] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 107.728538] sd 8:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 107.728620] sd 8:0:0:0: [sdf] Write Protect is off
[ 107.728674] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 107.728692] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 107.728854] sdf:<6>ata10: SATA link down (SStatus 0 SControl 300)
[ 108.368032] ata11: SATA link down (SStatus 0 SControl 300)
[ 108.688028] ata12: SATA link down (SStatus 0 SControl 300)
[ 135.819010] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 135.819073] ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 135.819075] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 135.819211] ata5.00: status: { DRDY }
[ 135.819262] ata5: hard resetting link
[ 136.292031] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 136.324062] ata5.00: configured for UDMA/133
[ 136.324120] ata5: EH complete
[ 136.818998] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 136.819058] ata6.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 136.819059] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 136.819195] ata6.00: status: { DRDY }
[ 136.819246] ata6: hard resetting link
[ 136.834703] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 136.834761] ata7.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 136.834762] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 136.834898] ata7.00: status: { DRDY }
[ 136.834948] ata7: hard resetting link
[ 137.300036] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 137.308356] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 137.380090] ata6.00: configured for UDMA/133
[ 137.380153] ata6: EH complete
[ 137.388063] ata7.00: configured for UDMA/133
[ 137.388118] ata7: EH complete
[ 137.819000] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 137.819061] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 137.819062] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 137.819202] ata8.00: status: { DRDY }
[ 137.819255] ata8: hard resetting link
[ 137.834715] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 137.834773] ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 137.834775] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 137.834913] ata9.00: status: { DRDY }
[ 137.834962] ata9: hard resetting link
[ 138.300033] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 138.308357] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 138.348218] ata9.00: configured for UDMA/133
[ 138.348280] ata9: EH complete
[ 138.380061] ata8.00: configured for UDMA/133
[ 138.380116] ata8: EH complete
[ 166.819003] ata5: limiting SATA link speed to 1.5 Gbps
[ 166.819058] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 166.819118] ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 166.819119] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 166.819256] ata5.00: status: { DRDY }
[ 166.819306] ata5: hard resetting link
[ 167.293030] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 167.332063] ata5.00: configured for UDMA/133
[ 167.332120] ata5: EH complete
[ 167.819003] ata6: limiting SATA link speed to 1.5 Gbps
[ 167.819056] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 167.819115] ata6.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 167.819117] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 167.819253] ata6.00: status: { DRDY }
[ 167.819303] ata6: hard resetting link
[ 167.834770] ata7: limiting SATA link speed to 1.5 Gbps
[ 167.834824] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 167.834882] ata7.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 167.834883] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 167.835019] ata7.00: status: { DRDY }
[ 167.835069] ata7: hard resetting link
[ 168.301033] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 168.309029] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 168.372092] ata6.00: configured for UDMA/133
[ 168.372156] ata6: EH complete
[ 168.380065] ata7.00: configured for UDMA/133
[ 168.380119] ata7: EH complete
[ 168.819131] ata9: limiting SATA link speed to 1.5 Gbps
[ 168.819185] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 168.819245] ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 168.819246] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 168.819383] ata9.00: status: { DRDY }
[ 168.819434] ata9: hard resetting link
[ 168.834901] ata8: limiting SATA link speed to 1.5 Gbps
[ 168.834953] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 168.835013] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 168.835014] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 168.835154] ata8.00: status: { DRDY }
[ 168.835203] ata8: hard resetting link
[ 169.300029] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 169.308354] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 169.341182] ata9.00: configured for UDMA/133
[ 169.341247] ata9: EH complete
[ 169.388061] ata8.00: configured for UDMA/133
[ 169.388115] ata8: EH complete
[ 197.818999] ata5.00: limiting speed to UDMA/100:PIO4
[ 197.819055] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 197.819115] ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 197.819116] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 197.819254] ata5.00: status: { DRDY }
[ 197.819305] ata5: hard resetting link
[ 198.293041] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 198.333061] ata5.00: configured for UDMA/100
[ 198.333121] ata5: EH complete
[ 198.819005] ata6.00: limiting speed to UDMA/100:PIO4
[ 198.819061] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 198.819121] ata6.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 198.819122] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 198.819259] ata6.00: status: { DRDY }
[ 198.819310] ata6: hard resetting link
[ 198.834780] ata7.00: limiting speed to UDMA/100:PIO4
[ 198.834831] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 198.834891] ata7.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 198.834892] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 198.835031] ata7.00: status: { DRDY }
[ 198.835083] ata7: hard resetting link
[ 199.300030] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 199.308354] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 199.364201] ata6.00: configured for UDMA/100
[ 199.364257] ata6: EH complete
[ 199.373061] ata7.00: configured for UDMA/100
[ 199.373114] ata7: EH complete
[ 199.819002] ata9.00: limiting speed to UDMA/100:PIO4
[ 199.819054] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 199.819113] ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 199.819115] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 199.819252] ata9.00: status: { DRDY }
[ 199.819302] ata9: hard resetting link
[ 199.834768] ata8.00: limiting speed to UDMA/100:PIO4
[ 199.834819] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 199.834877] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 199.834879] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 199.835018] ata8.00: status: { DRDY }
[ 199.835067] ata8: hard resetting link
[ 200.301033] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 200.309354] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 200.341173] ata9.00: configured for UDMA/100
[ 200.341230] ata9: EH complete
[ 200.389061] ata8.00: configured for UDMA/100
[ 200.389118] ata8: EH complete
[ 228.819137] ata5.00: limiting speed to UDMA/33:PIO4
[ 228.819177] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 228.819223] ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 228.819224] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 228.819308] ata5.00: status: { DRDY }
[ 228.819345] ata5: hard resetting link
[ 229.292030] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 229.332062] ata5.00: configured for UDMA/33
[ 229.332117] ata5: EH complete
[ 229.819008] ata6.00: limiting speed to UDMA/33:PIO4
[ 229.819063] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 229.819123] ata6.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 229.819124] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 229.819262] ata6.00: status: { DRDY }
[ 229.819313] ata6: hard resetting link
[ 229.834782] ata7.00: limiting speed to UDMA/33:PIO4
[ 229.834836] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 229.834894] ata7.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 229.834895] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 229.835031] ata7.00: status: { DRDY }
[ 229.835081] ata7: hard resetting link
[ 230.300032] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 230.308355] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 230.365198] ata6.00: configured for UDMA/33
[ 230.365254] ata6: EH complete
[ 230.373062] ata7.00: configured for UDMA/33
[ 230.373115] ata7: EH complete
[ 230.819000] ata9.00: limiting speed to UDMA/33:PIO4
[ 230.819053] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 230.819114] ata9.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 230.819116] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 230.819254] ata9.00: status: { DRDY }
[ 230.819305] ata9: hard resetting link
[ 230.834772] ata8.00: limiting speed to UDMA/33:PIO4
[ 230.834823] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 230.834881] ata8.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 230.834883] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 230.835022] ata8.00: status: { DRDY }
[ 230.835071] ata8: hard resetting link
[ 231.300034] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 231.308355] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 231.340174] ata9.00: configured for UDMA/33
[ 231.340230] ata9: EH complete
[ 231.388061] ata8.00: configured for UDMA/33
[ 231.388116] ata8: EH complete
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2009-08-04 17:48 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-03 20:18 HighPoint RocketRAID 2320 Davíð Steinn Geirsson
2009-08-03 20:31 ` Davíð Steinn Geirsson
2009-08-04 11:55 ` Tejun Heo
2009-08-04 17:48 ` Davíð Steinn Geirsson [this message]
2009-08-05 3:36 ` Mark Lord
2009-08-05 3:44 ` Mark Lord
2009-08-05 3:58 ` Tejun Heo
2009-08-05 21:01 ` Davíð Steinn Geirsson
2009-08-05 22:35 ` Mark Lord
2009-08-05 22:40 ` Mark Lord
2009-08-05 22:41 ` Mark Lord
2009-08-03 22:29 ` Mark Lord
2009-08-03 22:51 ` Mark Lord
2009-08-03 22:53 ` Mark Lord
2009-08-03 23:35 ` Davíð Steinn Geirsson
2009-08-04 1:50 ` Mark Lord
2009-08-04 17:51 ` Davíð Steinn Geirsson
2009-08-03 23:20 ` Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090804174852.GH13863@dsg.to \
--to=david@dsg.to \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).