Re: [PATCH 4/5] pata: Update experimental tags

[Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>]

On Thursday 19 November 2009 17:27:38 Alan Cox wrote:
> > > > already have a buggy cable detection (since ->pre_reset ignores the mandatory
> > > 
> > > Wrong.
> > 
> > You cannot know it unless you know how chip operates internally.  That's it.
> 
> Read the code. How the chip operates is irrelevant.

lol, there is a genuine cable detection bug in pata_hpt3x2n on closer look...

Jeff, please apply the patch below.


From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_hpt3x2n: fix cable detection

The detection was reversed between primary and secondary ports.

Fix it to match hpt366 and the vendor driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ata/pata_hpt3x2n.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: b/drivers/ata/pata_hpt3x2n.c
===================================================================
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -133,7 +133,7 @@ static int hpt3x2n_cable_detect(struct a
 	/* Restore state */
 	pci_write_config_byte(pdev, 0x5B, scr2);
 
-	if (ata66 & (1 << ap->port_no))
+	if (ata66 & (2 >> ap->port_no))
 		return ATA_CBL_PATA40;
 	else
 		return ATA_CBL_PATA80;