old Plextor CD Writer PX-W1210A is not recognized

old Plextor CD Writer PX-W1210A is not recognized

[Mario Bachmann]

Hello, 

my old PLEXTOR CD-R PX-W1210A, FwRev=1.09 is not recognized any more in Linux 2.6.31.4. 

In my old Rescue-Linux on the same machine with Linux 2.6.25.14 the CD-Writer is recognized and it works. 

To give you some Information about the Plextor-CD-Burner, I booted my old 2.6.25.14-Linux: 

# uname -a
Linux amd2000 2.6.25.14 #1 Fri Aug 1 23:55:59 CEST 2008 i686 AMD Athlon(tm) XP 2000+ AuthenticAMD GNU/Linux

# hdparm -Ii /dev/hdc
/dev/hdc:

 Model=PLEXTOR CD-R PX-W1210A, FwRev=1.09, SerialNo=
 Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
 RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
 BuffType=unknown, BuffSize=0kB, MaxMultSect=0
 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
 IORDY=on/off, tPIO={min:180,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4 
 DMA modes:  sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2 
 AdvancedPM=no

 * signifies the current active mode

# ls /dev/hd*
/dev/hda
/dev/hda1
/dev/hda10
/dev/hda11
/dev/hda2
/dev/hda3
/dev/hda4
/dev/hda5
/dev/hda6
/dev/hda7
/dev/hda8
/dev/hda9
/dev/hdb
/dev/hdb1
/dev/hdc

# dmesg|grep -e hda -e hdb -e hdc -e hdd
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: SAMSUNG SP1614N, ATA DISK drive
hdb: SAMSUNG SP1614N, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/100 mode selected
hdc: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: MWDMA2 mode selected
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
hdb: max request size: 512KiB
hdb: Host Protected Area detected.
hdb: Host Protected Area disabled.
hdb: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
hdb: cache flushes supported
 hdb: hdb1
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache
XFS mounting filesystem hda9
Ending clean XFS mount for filesystem: hda9
XFS mounting filesystem hda6
Ending clean XFS mount for filesystem: hda6
XFS mounting filesystem hda8
Ending clean XFS mount for filesystem: hda8
Adding 1199992k swap on /dev/hda10.  Priority:1 extents:1 across:1199992k

# dmesg |grep ide
BIOS-provided physical RAM map:
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Kernel command line: BOOT_IMAGE=Rescue ro root=309 video=vesafb:ywrap,mtrr agp=off max_loop=16
pci 0000:01:00.0: Boot video device
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15

The difference between my old 2.6.25.14-Linux and the newer 2.6.31.4-Linux is mainly the actuality of the updates (and the kernel). 
I configured the kernel by my own and the changes were made with "make oldconfig" and answer the questions. 

Can You please tell me if/why the Plextor do not work any more. Or better: Give me instructions to get it working again in newer versions of Linux Kernel. 
Thank You. 

Greetings
Mario

Re: old Plextor CD Writer PX-W1210A is not recognized

[Robert Hancock]

On 12/20/2009 05:32 AM, Mario Bachmann wrote:
> Hello,
>
> my old PLEXTOR CD-R PX-W1210A, FwRev=1.09 is not recognized any more in Linux 2.6.31.4.
>
> In my old Rescue-Linux on the same machine with Linux 2.6.25.14 the CD-Writer is recognized and it works.
>
> To give you some Information about the Plextor-CD-Burner, I booted my old 2.6.25.14-Linux:
>
> # uname -a
> Linux amd2000 2.6.25.14 #1 Fri Aug 1 23:55:59 CEST 2008 i686 AMD Athlon(tm) XP 2000+ AuthenticAMD GNU/Linux
>
> # hdparm -Ii /dev/hdc
> /dev/hdc:
>
>   Model=PLEXTOR CD-R PX-W1210A, FwRev=1.09, SerialNo=
>   Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
>   RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
>   BuffType=unknown, BuffSize=0kB, MaxMultSect=0
>   (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
>   IORDY=on/off, tPIO={min:180,w/IORDY:120}, tDMA={min:120,rec:120}
>   PIO modes:  pio0 pio1 pio2 pio3 pio4
>   DMA modes:  sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2
>   AdvancedPM=no
>
>   * signifies the current active mode
>
> # ls /dev/hd*
> /dev/hda
> /dev/hda1
> /dev/hda10
> /dev/hda11
> /dev/hda2
> /dev/hda3
> /dev/hda4
> /dev/hda5
> /dev/hda6
> /dev/hda7
> /dev/hda8
> /dev/hda9
> /dev/hdb
> /dev/hdb1
> /dev/hdc
>
> # dmesg|grep -e hda -e hdb -e hdc -e hdd
>      ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
>      ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
> hda: SAMSUNG SP1614N, ATA DISK drive
> hdb: SAMSUNG SP1614N, ATA DISK drive
> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hda: UDMA/100 mode selected
> hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hdb: UDMA/100 mode selected
> hdc: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
> hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hdc: MWDMA2 mode selected
> hda: max request size: 512KiB
> hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
> hda: cache flushes supported
>   hda: hda1 hda2 hda3 hda4<  hda5 hda6 hda7 hda8 hda9 hda10 hda11>
> hdb: max request size: 512KiB
> hdb: Host Protected Area detected.
> hdb: Host Protected Area disabled.
> hdb: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
> hdb: cache flushes supported
>   hdb: hdb1
> hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache
> XFS mounting filesystem hda9
> Ending clean XFS mount for filesystem: hda9
> XFS mounting filesystem hda6
> Ending clean XFS mount for filesystem: hda6
> XFS mounting filesystem hda8
> Ending clean XFS mount for filesystem: hda8
> Adding 1199992k swap on /dev/hda10.  Priority:1 extents:1 across:1199992k
>
> # dmesg |grep ide
> BIOS-provided physical RAM map:
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Kernel command line: BOOT_IMAGE=Rescue ro root=309 video=vesafb:ywrap,mtrr agp=off max_loop=16
> pci 0000:01:00.0: Boot video device
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>      ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
>      ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
> Probing IDE interface ide0...
> Probing IDE interface ide1...
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
>
> The difference between my old 2.6.25.14-Linux and the newer 2.6.31.4-Linux is mainly the actuality of the updates (and the kernel).
> I configured the kernel by my own and the changes were made with "make oldconfig" and answer the questions.
>
> Can You please tell me if/why the Plextor do not work any more. Or better: Give me instructions to get it working again in newer versions of Linux Kernel.

It's difficult to say without seeing the dmesg output from the newer 
kernel. However, from the output you posted above it seems that you may 
not have any hardware-specific IDE driver enabled in your kernel 
configuration and it's using a generic driver. I believe this mode isn't 
supported anymore, at least not by default.

Re: old Plextor CD Writer PX-W1210A is not recognized

[Mario Bachmann]

Am Sun, 20 Dec 2009 13:26:25 -0600
schrieb Robert Hancock <hancockrwd@gmail.com>:

> On 12/20/2009 05:32 AM, Mario Bachmann wrote:
> > Hello,
> >
> > my old PLEXTOR CD-R PX-W1210A, FwRev=1.09 is not recognized any more in Linux 2.6.31.4.
> >
> > In my old Rescue-Linux on the same machine with Linux 2.6.25.14 the CD-Writer is recognized and it works.
> >
> > To give you some Information about the Plextor-CD-Burner, I booted my old 2.6.25.14-Linux:
> >
> > # uname -a
> > Linux amd2000 2.6.25.14 #1 Fri Aug 1 23:55:59 CEST 2008 i686 AMD Athlon(tm) XP 2000+ AuthenticAMD GNU/Linux
> >
> > # hdparm -Ii /dev/hdc
> > /dev/hdc:
> >
> >   Model=PLEXTOR CD-R PX-W1210A, FwRev=1.09, SerialNo=
> >   Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
> >   RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
> >   BuffType=unknown, BuffSize=0kB, MaxMultSect=0
> >   (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
> >   IORDY=on/off, tPIO={min:180,w/IORDY:120}, tDMA={min:120,rec:120}
> >   PIO modes:  pio0 pio1 pio2 pio3 pio4
> >   DMA modes:  sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2
> >   AdvancedPM=no
> >
> >   * signifies the current active mode
> >
> > # ls /dev/hd*
> > /dev/hda
> > /dev/hda1
> > /dev/hda10
> > /dev/hda11
> > /dev/hda2
> > /dev/hda3
> > /dev/hda4
> > /dev/hda5
> > /dev/hda6
> > /dev/hda7
> > /dev/hda8
> > /dev/hda9
> > /dev/hdb
> > /dev/hdb1
> > /dev/hdc
> >
> > # dmesg|grep -e hda -e hdb -e hdc -e hdd
> >      ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
> >      ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
> > hda: SAMSUNG SP1614N, ATA DISK drive
> > hdb: SAMSUNG SP1614N, ATA DISK drive
> > hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> > hda: UDMA/100 mode selected
> > hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> > hdb: UDMA/100 mode selected
> > hdc: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
> > hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> > hdc: MWDMA2 mode selected
> > hda: max request size: 512KiB
> > hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
> > hda: cache flushes supported
> >   hda: hda1 hda2 hda3 hda4<  hda5 hda6 hda7 hda8 hda9 hda10 hda11>
> > hdb: max request size: 512KiB
> > hdb: Host Protected Area detected.
> > hdb: Host Protected Area disabled.
> > hdb: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
> > hdb: cache flushes supported
> >   hdb: hdb1
> > hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache
> > XFS mounting filesystem hda9
> > Ending clean XFS mount for filesystem: hda9
> > XFS mounting filesystem hda6
> > Ending clean XFS mount for filesystem: hda6
> > XFS mounting filesystem hda8
> > Ending clean XFS mount for filesystem: hda8
> > Adding 1199992k swap on /dev/hda10.  Priority:1 extents:1 across:1199992k
> >
> > # dmesg |grep ide
> > BIOS-provided physical RAM map:
> > ACPI: IRQ0 used by override.
> > ACPI: IRQ2 used by override.
> > ACPI: IRQ9 used by override.
> > Kernel command line: BOOT_IMAGE=Rescue ro root=309 video=vesafb:ywrap,mtrr agp=off max_loop=16
> > pci 0000:01:00.0: Boot video device
> > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> >      ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
> >      ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
> > Probing IDE interface ide0...
> > Probing IDE interface ide1...
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > ide1 at 0x170-0x177,0x376 on irq 15
> >
> > The difference between my old 2.6.25.14-Linux and the newer 2.6.31.4-Linux is mainly the actuality of the updates (and the kernel).
> > I configured the kernel by my own and the changes were made with "make oldconfig" and answer the questions.
> >
> > Can You please tell me if/why the Plextor do not work any more. Or better: Give me instructions to get it working again in newer versions of Linux Kernel.
> 
> It's difficult to say without seeing the dmesg output from the newer 
> kernel. However, from the output you posted above it seems that you may 
> not have any hardware-specific IDE driver enabled in your kernel 
> configuration and it's using a generic driver. I believe this mode isn't 
> supported anymore, at least not by default.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

No problem, here comes the dmesg-output from the newer kernel:
Greetings Mario

Linux version 2.6.31.4 (root@amd2000) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #5 Fri Dec 11 23:51:26 CET 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
 BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x3fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-DFFFF write-protect
  E0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 base 0D0000000 mask FF8000000 write-combining
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-15000
ACPI: RSDP 000fa340 00014 (v00 AMI   )
ACPI: RSDT 3fff0000 0002C (v01 AMIINT SiS735XX 00001000 MSFT 0100000B)
ACPI: FACP 3fff0030 00074 (v01 AMIINT SiS735XX 00001000 MSFT 0100000B)
ACPI: DSDT 3fff0100 03332 (v01    SiS      735 00000100 MSFT 0100000D)
ACPI: FACS 3fff8000 00040
ACPI: APIC 3fff00b0 00050 (v01 AMIINT SiS735XX 00001000 MSFT 0100000B)
ACPI: Local APIC address 0xfee00000
135MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00011000 - 00017f00
(6 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0001000000 - 00014f3130]    TEXT DATA BSS ==> [0001000000 - 00014f3130]
  #2 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #3 [00014f4000 - 00014fa294]              BRK ==> [00014f4000 - 00014fa294]
  #4 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
  #5 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0003fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0003fff0
On node 0 totalpages: 262015
free_area_init_node: node 0, pgdat c146dac0, node_mem_map c14fb200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 272 pages used for memmap
  HighMem zone: 34530 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
nr_irqs_gsi: 24
Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259967
Kernel command line: auto BOOT_IMAGE=Linux-26314 ro root=305 video=vesafb:ywrap,mtrr:3 agp=off loop.max_loop=32
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0003fff0)
Memory: 1033548k/1048512k available (3313k kernel code, 14112k reserved, 1232k data, 280k init, 139208k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffa4000 - 0xfffff000   ( 364 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc1471000 - 0xc14b7000   ( 280 kB)
      .data : 0xc133c7d5 - 0xc1470b84   (1232 kB)
      .text : 0xc1000000 - 0xc133c7d5   (3313 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:288
Fast TSC calibration using PIT
Detected 1673.886 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 3347.77 BogoMIPS (lpj=6695544)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
mce: CPU supports 4 MCE banks
CPU: AMD Athlon(tm) XP 2000+ stepping 02
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090521
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
pci 0000:00:02.0: Enabling SiS 96x SMBus
pci 0000:00:02.1: reg 20 io port: [0xc00-0xc1f]
pci 0000:00:02.2: reg 10 32bit mmio: [0xcfffe000-0xcfffefff]
pci 0000:00:02.3: reg 10 32bit mmio: [0xcffff000-0xcfffffff]
pci 0000:00:02.5: reg 20 io port: [0xff00-0xff0f]
pci 0000:00:02.7: reg 10 io port: [0xdc00-0xdcff]
pci 0000:00:02.7: reg 14 io port: [0xd800-0xd83f]
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:02.7: PME# disabled
pci 0000:00:03.0: reg 10 io port: [0xd400-0xd4ff]
pci 0000:00:03.0: reg 14 32bit mmio: [0xcfff9000-0xcfff9fff]
pci 0000:00:03.0: reg 30 32bit mmio: [0xcffc0000-0xcffdffff]
pci 0000:00:03.0: supports D1 D2
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:0d.0: reg 10 io port: [0xd000-0xd0ff]
pci 0000:00:0d.0: reg 14 32bit mmio: [0xcfffdf00-0xcfffdfff]
pci 0000:00:0d.0: reg 30 32bit mmio: [0xcffa0000-0xcffbffff]
pci 0000:00:0d.0: supports D1 D2
pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0f.0: reg 10 32bit mmio: [0xcfffb000-0xcfffbfff]
pci 0000:00:0f.0: supports D1 D2
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0f.0: PME# disabled
pci 0000:00:0f.1: reg 10 32bit mmio: [0xcfffc000-0xcfffcfff]
pci 0000:00:0f.1: supports D1 D2
pci 0000:00:0f.1: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0f.1: PME# disabled
pci 0000:00:0f.2: reg 10 32bit mmio: [0xcfffde00-0xcfffdeff]
pci 0000:00:0f.2: supports D1 D2
pci 0000:00:0f.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0f.2: PME# disabled
pci 0000:00:11.0: reg 10 io port: [0xcc00-0xcc3f]
pci 0000:00:11.0: supports D2
pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xb0000000-0xbfffffff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xcd000000-0xcdffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xcfee0000-0xcfefffff]
pci 0000:00:01.0: bridge 32bit mmio: [0xcbe00000-0xcfefffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xabc00000-0xcbcfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15)
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: disabled
pci 0000:00:01.0:   MEM window: 0xcbe00000-0xcfefffff
pci 0000:00:01.0:   PREFETCH window: 0xabc00000-0xcbcfffff
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 1 mem: [0xcbe00000-0xcfefffff]
pci_bus 0000:01: resource 2 pref mem [0xabc00000-0xcbcfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(1261343899.127:1): initialized
highmem bounce pool size: 64 pages
SGI XFS with ACLs, security attributes, no debug enabled
msgmni has been set to 1747
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
vesafb: framebuffer at 0xb0000000, mapped to 0xf8080000, using 2560k, total 131072k
vesafb: mode is 1280x1024x8, linelength=1280, pages=1
vesafb: protected mode interface info at c000:d5a0
vesafb: pmi: set display start = c00cd5d6, set palette = c00cd640
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=2048
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
processor LNXCPU:00: registered as cooling_device0
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 2.88M AMI BIOS
FDC 0 is a post-1991 82077
loop: module loaded
Uniform Multi-Platform E-IDE driver
sis5513 0000:00:02.5: SiS735 ATA 100 (2nd gen) controller
sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0xd0)
sis5513 0000:00:02.5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xff00-0xff07
    ide1: BM-DMA at 0xff08-0xff0f
Probing IDE interface ide0...
hda: SAMSUNG SP1614N, ATA DISK drive
Switched to high resolution mode on CPU 0
hdb: SAMSUNG SP1614N, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/100 mode selected
Probing IDE interface ide1...
ide1: no devices on the port
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
hdb: max request size: 512KiB
hdb: Host Protected Area detected.
	current capacity is 66055248 sectors (33820 MB)
	native  capacity is 312581808 sectors (160041 MB)
hdb: 66055248 sectors (33820 MB) w/8192KiB Cache, CHS=16383/255/63
hdb: cache flushes supported
 hdb: hdb1
hdb: p1 size 312581745 exceeds device capacity, enabling native capacity
hdb: detected capacity change from 33820286976 to 160041885696
ide-cd driver 5.00
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:00:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:00:0d.0: no PCI Express capability
eth0: RTL8169sb/8110sb at 0xf8040f00, 00:e0:51:20:00:9d, XID 10000000 IRQ 18
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:0f.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:0f.2: EHCI Host Controller
ehci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.2: irq 17, io mem 0xcfffde00
ehci_hcd 0000:00:0f.2: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:02.2: OHCI Host Controller
ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.2: irq 19, io mem 0xcfffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:02.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:02.3: OHCI Host Controller
ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.3: irq 23, io mem 0xcffff000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:0f.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:0f.0: OHCI Host Controller
ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:0f.0: irq 19, io mem 0xcfffb000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:0f.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:0f.1: OHCI Host Controller
ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:0f.1: irq 16, io mem 0xcfffc000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram
i2c /dev entries driver
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
ACPI: I/O resource 0000:00:02.1 [0xc00-0xc1f] conflicts with ACPI region SMRG [0xc00-0xc1f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sis96x_smbus: probe of 0000:00:02.1 failed with error -16
it87: Found IT8705F chip at 0x290, revision 2
cpuidle: using governor ladder
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI Shortcut mode
rtc_cmos 00:02: setting system clock to 2009-12-20 21:18:22 UTC (1261343902)
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
UDF-fs: No partition found (1)
XFS mounting filesystem hda5
Ending clean XFS mount for filesystem: hda5
VFS: Mounted root (xfs filesystem) readonly on device 3:5.
Freeing unused kernel memory: 280k freed
udev: starting version 146
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
ppdev: user-space parallel port driver
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA UNIX x86 Kernel Module  190.42  Tue Oct 20 20:18:32 PDT 2009
Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
intel8x0_measure_ac97_clock: measured 55772 usecs (2682 samples)
intel8x0: clocking to 48000
ENS1371 0000:00:11.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
XFS mounting filesystem hda6
Ending clean XFS mount for filesystem: hda6
XFS mounting filesystem hda8
Ending clean XFS mount for filesystem: hda8
XFS mounting filesystem hdb1
Ending clean XFS mount for filesystem: hdb1
Adding 1199992k swap on /dev/hda10.  Priority:1 extents:1 across:1199992k 
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16383 buckets, 65532 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
r8169: eth0: link up
NET: Registered protocol family 10
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
XFS mounting filesystem loop0
Ending clean XFS mount for filesystem: loop0
XFS mounting filesystem loop1
Ending clean XFS mount for filesystem: loop1
eth0: no IPv6 routers present