From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 34/64] cy82c693: remove stale driver history
Date: Mon, 18 Jan 2010 18:18:58 +0100 [thread overview]
Message-ID: <20100118171858.14623.27828.sendpatchset@localhost> (raw)
In-Reply-To: <20100118171349.14623.90030.sendpatchset@localhost>
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] cy82c693: remove stale driver history
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/cy82c693.c | 33 ---------------------------------
1 file changed, 33 deletions(-)
Index: b/drivers/ide/cy82c693.c
===================================================================
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -5,39 +5,6 @@
* CYPRESS CY82C693 chipset IDE controller
*
* The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
- * Writing the driver was quite simple, since most of the job is
- * done by the generic pci-ide support.
- * The hard part was finding the CY82C693's datasheet on Cypress's
- * web page :-(. But Altavista solved this problem :-).
- *
- *
- * Notes:
- * - I recently got a 16.8G IBM DTTA, so I was able to test it with
- * a large and fast disk - the results look great, so I'd say the
- * driver is working fine :-)
- * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA
- * - this is my first linux driver, so there's probably a lot of room
- * for optimizations and bug fixing, so feel free to do it.
- * - if using PIO mode it's a good idea to set the PIO mode and
- * 32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda
- * - I had some problems with my IBM DHEA with PIO modes < 2
- * (lost interrupts) ?????
- * - first tests with DMA look okay, they seem to work, but there is a
- * problem with sound - the BusMaster IDE TimeOut should fixed this
- *
- * Ancient History:
- * AMH@1999-08-24: v0.34 init_cy82c693_chip moved to pci_init_cy82c693
- * ASK@1999-01-23: v0.33 made a few minor code clean ups
- * removed DMA clock speed setting by default
- * added boot message
- * ASK@1998-11-01: v0.32 added support to set BusMaster IDE TimeOut
- * added support to set DMA Controller Clock Speed
- * ASK@1998-10-31: v0.31 fixed problem with setting to high DMA modes
- * on some drives.
- * ASK@1998-10-29: v0.3 added support to set DMA modes
- * ASK@1998-10-28: v0.2 added support to set PIO modes
- * ASK@1998-10-27: v0.1 first version - chipset detection
- *
*/
#include <linux/module.h>
next prev parent reply other threads:[~2010-01-18 17:18 UTC|newest]
Thread overview: 149+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-18 17:13 [PATCH 00/64] more PATA fixes Bartlomiej Zolnierkiewicz
2010-01-18 17:13 ` [PATCH 01/64] libata: fix CFA handling in ide_timing_compute() Bartlomiej Zolnierkiewicz
2010-01-18 18:23 ` Sergei Shtylyov
2010-01-18 18:29 ` Bartlomiej Zolnierkiewicz
2010-01-18 18:57 ` Sergei Shtylyov
2010-01-18 19:04 ` Bartlomiej Zolnierkiewicz
2010-01-21 4:06 ` Jeff Garzik
2010-01-18 17:14 ` [PATCH 02/64] pata_ali: documentation fixes Bartlomiej Zolnierkiewicz
2010-01-21 4:06 ` Jeff Garzik
2010-01-18 17:14 ` [PATCH 03/64] pata_ali: cleanup ali_set_piomode() Bartlomiej Zolnierkiewicz
2010-01-18 17:46 ` Alan Cox
2010-01-18 18:16 ` Bartlomiej Zolnierkiewicz
2010-01-18 17:14 ` [PATCH 04/64] pata_amd: remove bogus code from timing_setup() Bartlomiej Zolnierkiewicz
2010-01-18 17:50 ` Alan Cox
2010-01-18 18:18 ` Bartlomiej Zolnierkiewicz
2010-01-18 17:14 ` [PATCH 05/64] pata_atiixp: remove superfluous wrapper function Bartlomiej Zolnierkiewicz
2010-01-21 4:07 ` Jeff Garzik
2010-01-21 4:09 ` Jeff Garzik
2010-01-21 11:23 ` Bartlomiej Zolnierkiewicz
2010-01-21 16:50 ` Jeff Garzik
2010-01-18 17:14 ` [PATCH 06/64] pata_atiixp: add locking for parallel scanning Bartlomiej Zolnierkiewicz
2010-01-21 4:07 ` Jeff Garzik
2010-01-18 17:14 ` [PATCH 07/64] pata_atiixp: enable parallel scan Bartlomiej Zolnierkiewicz
2010-01-18 17:52 ` Alan Cox
2010-01-18 18:18 ` Bartlomiej Zolnierkiewicz
2010-01-18 17:14 ` [PATCH 08/64] pata_cmd64x: fix PIO setup Bartlomiej Zolnierkiewicz
2010-01-21 4:14 ` Jeff Garzik
2010-01-18 17:15 ` [PATCH 09/64] pata_cmd64x: fix handling of address setup timings Bartlomiej Zolnierkiewicz
2010-01-18 18:46 ` Sergei Shtylyov
2010-01-18 17:15 ` [PATCH 10/64] pata_cmd64x: cmd648_bmdma_stop() fix Bartlomiej Zolnierkiewicz
2010-01-18 17:15 ` [PATCH 11/64] pata_cmd64x: remove unused definitions Bartlomiej Zolnierkiewicz
2010-01-18 17:15 ` [PATCH 12/64] pata_cs5520: convert to use ->init_host method Bartlomiej Zolnierkiewicz
2010-01-18 17:15 ` [PATCH 13/64] pata_cs5535: use correct values for PIO1 and PIO2 data timings Bartlomiej Zolnierkiewicz
2010-01-21 4:16 ` Jeff Garzik
2010-01-18 17:15 ` [PATCH 14/64] pata_cypress: fix PIO timings underclocking Bartlomiej Zolnierkiewicz
2010-01-18 19:05 ` Sergei Shtylyov
2010-01-18 17:15 ` [PATCH 15/64] pata_efar: always program master_data before slave_data Bartlomiej Zolnierkiewicz
2010-01-18 17:55 ` Alan Cox
2010-01-21 4:16 ` Jeff Garzik
2010-01-18 17:16 ` [PATCH 16/64] pata_efar: fix secondary port support Bartlomiej Zolnierkiewicz
2010-01-21 4:17 ` Jeff Garzik
2010-01-18 17:16 ` [PATCH 17/64] pata_efar: add locking for parallel scanning Bartlomiej Zolnierkiewicz
2010-01-18 17:16 ` [PATCH 18/64] pata_efar: enable parallel scan Bartlomiej Zolnierkiewicz
2010-01-18 17:16 ` [PATCH 19/64] pata_serverworks: fix PIO setup for the second channel Bartlomiej Zolnierkiewicz
2010-01-21 4:18 ` Jeff Garzik
2010-01-18 17:16 ` [PATCH 20/64] pata_serverworks: fix error message Bartlomiej Zolnierkiewicz
2010-01-18 17:16 ` [PATCH 21/64] pata_serverworks: cleanup cable detection Bartlomiej Zolnierkiewicz
2010-01-21 4:18 ` Jeff Garzik
2010-01-18 17:17 ` [PATCH 22/64] pata_via: fix address setup timings underlocking Bartlomiej Zolnierkiewicz
2010-01-18 18:00 ` Alan Cox
2010-01-21 4:19 ` Jeff Garzik
2010-01-18 17:17 ` [PATCH 23/64] pata_via: store UDMA masks in via_isa_bridges table Bartlomiej Zolnierkiewicz
2010-01-18 18:03 ` Alan Cox
2010-01-21 4:25 ` Jeff Garzik
2010-01-18 17:17 ` [PATCH 24/64] ide: fix for ide_timing quantisation errors Bartlomiej Zolnierkiewicz
2010-01-18 19:09 ` Sergei Shtylyov
2010-01-19 9:05 ` David Miller
2010-01-18 17:17 ` [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute() Bartlomiej Zolnierkiewicz
2010-01-18 19:11 ` Sergei Shtylyov
2010-01-19 9:25 ` David Miller
2010-01-19 15:09 ` Bartlomiej Zolnierkiewicz
2010-01-19 19:30 ` David Miller
2010-01-19 19:42 ` Sergei Shtylyov
2010-01-19 19:48 ` David Miller
2010-01-19 20:25 ` Bartlomiej Zolnierkiewicz
2010-01-18 17:17 ` [PATCH 26/64] alim15x3: fix PIO timings calculations Bartlomiej Zolnierkiewicz
2010-01-19 9:25 ` David Miller
2010-01-18 17:17 ` [PATCH 27/64] alim15x3: add ali_fifo_control() helper Bartlomiej Zolnierkiewicz
2010-01-19 9:25 ` David Miller
2010-01-18 17:17 ` [PATCH 28/64] alim15x3: remove superfluous locking from ali_set_pio_mode() Bartlomiej Zolnierkiewicz
2010-01-19 9:25 ` David Miller
2010-01-18 17:18 ` [PATCH 29/64] alim15x3: cleanup ali_cable_detect() Bartlomiej Zolnierkiewicz
2010-01-19 9:25 ` David Miller
2010-01-18 17:18 ` [PATCH 30/64] amd74xx: don't change UDMA settings when programming PIO timings Bartlomiej Zolnierkiewicz
2010-01-19 9:26 ` David Miller
2010-01-18 17:18 ` [PATCH 31/64] cmd64x: fix PIO and MWDMA timings calculations Bartlomiej Zolnierkiewicz
2010-01-19 9:26 ` David Miller
2010-01-18 17:18 ` [PATCH 32/64] cmd64x: remove superfluous checks from cmd64x_set_dma_mode() Bartlomiej Zolnierkiewicz
2010-01-19 9:26 ` David Miller
2010-01-18 17:18 ` [PATCH 33/64] cy82c693: fix PIO timings calculations Bartlomiej Zolnierkiewicz
2010-01-19 9:26 ` David Miller
2010-01-18 17:18 ` Bartlomiej Zolnierkiewicz [this message]
2010-01-19 9:26 ` [PATCH 34/64] cy82c693: remove stale driver history David Miller
2010-01-18 17:19 ` [PATCH 35/64] opti621: " Bartlomiej Zolnierkiewicz
2010-01-19 9:26 ` David Miller
2010-01-18 17:19 ` [PATCH 36/64] pdc202xx_old: add ->init_hwif method Bartlomiej Zolnierkiewicz
2010-01-19 9:26 ` David Miller
2010-01-18 17:19 ` [PATCH 37/64] serverworks: cleanup svwks_udma_filter() Bartlomiej Zolnierkiewicz
2010-01-19 9:26 ` David Miller
2010-01-18 17:19 ` [PATCH 38/64] serverworks: add missing pci_dev_put() call Bartlomiej Zolnierkiewicz
2010-01-19 9:27 ` David Miller
2010-01-18 17:19 ` [PATCH 39/64] via82cxxx: vx855 is a single channel controller Bartlomiej Zolnierkiewicz
2010-01-19 9:27 ` David Miller
2010-01-18 17:19 ` [PATCH 40/64] ide: add SATA cable detection support Bartlomiej Zolnierkiewicz
2010-01-19 9:42 ` David Miller
2010-01-18 17:19 ` [PATCH 41/64] via82cxxx: fix SATA cable detection Bartlomiej Zolnierkiewicz
2010-01-19 9:42 ` David Miller
2010-01-18 17:20 ` [PATCH 42/64] via82cxxx: workaround h/w bugs Bartlomiej Zolnierkiewicz
2010-01-19 9:42 ` David Miller
2010-01-18 17:20 ` [PATCH 43/64] via82cxxx: add support for vt8261 and future chips Bartlomiej Zolnierkiewicz
2010-01-19 9:42 ` David Miller
2010-01-18 17:20 ` [PATCH 44/64] via82cxxx: add support for VT6415 PCIE PATA IDE Host Controller Bartlomiej Zolnierkiewicz
2010-01-19 9:42 ` David Miller
2010-01-18 17:20 ` [PATCH 45/64] via82cxxx: fix UDMA settings programming Bartlomiej Zolnierkiewicz
2010-01-19 9:43 ` David Miller
2010-01-18 17:20 ` [PATCH 46/64] ide: add drive->pio_mode field Bartlomiej Zolnierkiewicz
2010-01-18 19:28 ` Sergei Shtylyov
2010-01-19 15:09 ` Bartlomiej Zolnierkiewicz
2010-01-21 17:48 ` Sergei Shtylyov
2010-01-19 9:43 ` David Miller
2010-01-18 17:20 ` [PATCH 47/64] ide: add drive->dma_mode field Bartlomiej Zolnierkiewicz
2010-01-19 9:43 ` David Miller
2010-04-12 14:12 ` Sergei Shtylyov
2010-01-18 17:20 ` [PATCH 48/64] ide: change ->set_pio_mode method parameters Bartlomiej Zolnierkiewicz
2010-01-19 9:45 ` David Miller
2010-01-18 17:20 ` [PATCH 49/64] ide: change ->set_dma_mode " Bartlomiej Zolnierkiewicz
2010-01-19 9:45 ` David Miller
2010-01-18 17:20 ` [PATCH 50/64] ide-timings: use ->pio_mode value to determine fastest PIO speed Bartlomiej Zolnierkiewicz
2010-01-19 9:48 ` David Miller
2010-01-18 17:21 ` [PATCH 51/64] alim15x3: fix handling of address setup timings Bartlomiej Zolnierkiewicz
2010-01-19 9:53 ` David Miller
2010-01-18 17:21 ` [PATCH 52/64] alim15x3: fix handling of command timings Bartlomiej Zolnierkiewicz
2010-01-19 9:53 ` David Miller
2010-01-18 17:21 ` [PATCH 53/64] alim15x3: fix handling of DMA timings Bartlomiej Zolnierkiewicz
2010-01-19 9:53 ` David Miller
2010-01-18 17:21 ` [PATCH 54/64] alim15x3: fix handling of UDMA enable bit Bartlomiej Zolnierkiewicz
2010-01-19 9:53 ` David Miller
2010-04-12 13:53 ` Sergei Shtylyov
2010-04-13 15:15 ` Bartlomiej Zolnierkiewicz
2010-01-18 17:21 ` [PATCH 55/64] amd74xx: use ->pio_mode value to determine pair device speed Bartlomiej Zolnierkiewicz
2010-01-19 9:53 ` David Miller
2010-01-18 17:21 ` [PATCH 56/64] cmd64x: fix handling of address setup timings Bartlomiej Zolnierkiewicz
2010-01-19 9:53 ` David Miller
2010-01-18 17:21 ` [PATCH 57/64] cs5535: use ->pio_mode value to determine pair device speed Bartlomiej Zolnierkiewicz
2010-01-19 9:54 ` David Miller
2010-01-18 17:21 ` [PATCH 58/64] cs5536: " Bartlomiej Zolnierkiewicz
2010-01-19 9:54 ` David Miller
2010-01-18 17:22 ` [PATCH 59/64] it821x: " Bartlomiej Zolnierkiewicz
2010-01-19 9:54 ` David Miller
2010-01-18 17:22 ` [PATCH 60/64] palm_bk3710: " Bartlomiej Zolnierkiewicz
2010-01-19 9:54 ` David Miller
2010-01-18 17:22 ` [PATCH 61/64] siimage: " Bartlomiej Zolnierkiewicz
2010-01-19 9:54 ` David Miller
2010-01-18 17:22 ` [PATCH 62/64] tx493xide: " Bartlomiej Zolnierkiewicz
2010-01-19 9:54 ` David Miller
2010-01-18 17:22 ` [PATCH 63/64] via82cxxx: " Bartlomiej Zolnierkiewicz
2010-01-19 9:54 ` David Miller
2010-01-18 17:22 ` [PATCH 64/64] ide: make ide_get_best_pio_mode() static Bartlomiej Zolnierkiewicz
2010-01-19 9:54 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100118171858.14623.27828.sendpatchset@localhost \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).