linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 47/64] ide: add drive->dma_mode field
Date: Mon, 18 Jan 2010 18:20:35 +0100	[thread overview]
Message-ID: <20100118172035.14623.50000.sendpatchset@localhost> (raw)
In-Reply-To: <20100118171349.14623.90030.sendpatchset@localhost>

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] ide: add drive->dma_mode field

Add dma_mode field to ide_drive_t matching dma_mode field used in
struct ata_device.

The validity of the field is restricted to ->dma_pio_mode method
only currently in IDE subsystem.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/aec62xx.c       |    1 +
 drivers/ide/ide-xfer-mode.c |    2 ++
 include/linux/ide.h         |    1 +
 3 files changed, 4 insertions(+)

Index: b/drivers/ide/aec62xx.c
===================================================================
--- a/drivers/ide/aec62xx.c
+++ b/drivers/ide/aec62xx.c
@@ -136,6 +136,7 @@ static void aec6260_set_mode(ide_drive_t
 
 static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
+	drive->dma_mode = pio + XFER_PIO_0;
 	drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0);
 }
 
Index: b/drivers/ide/ide-xfer-mode.c
===================================================================
--- a/drivers/ide/ide-xfer-mode.c
+++ b/drivers/ide/ide-xfer-mode.c
@@ -167,9 +167,11 @@ int ide_set_dma_mode(ide_drive_t *drive,
 	if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
 		if (ide_config_drive_speed(drive, mode))
 			return -1;
+		drive->dma_mode = mode;
 		port_ops->set_dma_mode(drive, mode);
 		return 0;
 	} else {
+		drive->dma_mode = mode;
 		port_ops->set_dma_mode(drive, mode);
 		return ide_config_drive_speed(drive, mode);
 	}
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -516,6 +516,7 @@ struct ide_drive_s {
         u8	current_speed;	/* current transfer rate set */
 	u8	desired_speed;	/* desired transfer rate set */
 	u8	pio_mode;	/* for ->set_pio_mode _only_ */
+	u8	dma_mode;	/* for ->dma_pio_mode _only_ */
         u8	dn;		/* now wide spread use */
 	u8	acoustic;	/* acoustic management */
 	u8	media;		/* disk, cdrom, tape, floppy, ... */

  parent reply	other threads:[~2010-01-18 17:21 UTC|newest]

Thread overview: 149+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-18 17:13 [PATCH 00/64] more PATA fixes Bartlomiej Zolnierkiewicz
2010-01-18 17:13 ` [PATCH 01/64] libata: fix CFA handling in ide_timing_compute() Bartlomiej Zolnierkiewicz
2010-01-18 18:23   ` Sergei Shtylyov
2010-01-18 18:29     ` Bartlomiej Zolnierkiewicz
2010-01-18 18:57       ` Sergei Shtylyov
2010-01-18 19:04         ` Bartlomiej Zolnierkiewicz
2010-01-21  4:06   ` Jeff Garzik
2010-01-18 17:14 ` [PATCH 02/64] pata_ali: documentation fixes Bartlomiej Zolnierkiewicz
2010-01-21  4:06   ` Jeff Garzik
2010-01-18 17:14 ` [PATCH 03/64] pata_ali: cleanup ali_set_piomode() Bartlomiej Zolnierkiewicz
2010-01-18 17:46   ` Alan Cox
2010-01-18 18:16     ` Bartlomiej Zolnierkiewicz
2010-01-18 17:14 ` [PATCH 04/64] pata_amd: remove bogus code from timing_setup() Bartlomiej Zolnierkiewicz
2010-01-18 17:50   ` Alan Cox
2010-01-18 18:18     ` Bartlomiej Zolnierkiewicz
2010-01-18 17:14 ` [PATCH 05/64] pata_atiixp: remove superfluous wrapper function Bartlomiej Zolnierkiewicz
2010-01-21  4:07   ` Jeff Garzik
2010-01-21  4:09     ` Jeff Garzik
2010-01-21 11:23       ` Bartlomiej Zolnierkiewicz
2010-01-21 16:50         ` Jeff Garzik
2010-01-18 17:14 ` [PATCH 06/64] pata_atiixp: add locking for parallel scanning Bartlomiej Zolnierkiewicz
2010-01-21  4:07   ` Jeff Garzik
2010-01-18 17:14 ` [PATCH 07/64] pata_atiixp: enable parallel scan Bartlomiej Zolnierkiewicz
2010-01-18 17:52   ` Alan Cox
2010-01-18 18:18     ` Bartlomiej Zolnierkiewicz
2010-01-18 17:14 ` [PATCH 08/64] pata_cmd64x: fix PIO setup Bartlomiej Zolnierkiewicz
2010-01-21  4:14   ` Jeff Garzik
2010-01-18 17:15 ` [PATCH 09/64] pata_cmd64x: fix handling of address setup timings Bartlomiej Zolnierkiewicz
2010-01-18 18:46   ` Sergei Shtylyov
2010-01-18 17:15 ` [PATCH 10/64] pata_cmd64x: cmd648_bmdma_stop() fix Bartlomiej Zolnierkiewicz
2010-01-18 17:15 ` [PATCH 11/64] pata_cmd64x: remove unused definitions Bartlomiej Zolnierkiewicz
2010-01-18 17:15 ` [PATCH 12/64] pata_cs5520: convert to use ->init_host method Bartlomiej Zolnierkiewicz
2010-01-18 17:15 ` [PATCH 13/64] pata_cs5535: use correct values for PIO1 and PIO2 data timings Bartlomiej Zolnierkiewicz
2010-01-21  4:16   ` Jeff Garzik
2010-01-18 17:15 ` [PATCH 14/64] pata_cypress: fix PIO timings underclocking Bartlomiej Zolnierkiewicz
2010-01-18 19:05   ` Sergei Shtylyov
2010-01-18 17:15 ` [PATCH 15/64] pata_efar: always program master_data before slave_data Bartlomiej Zolnierkiewicz
2010-01-18 17:55   ` Alan Cox
2010-01-21  4:16   ` Jeff Garzik
2010-01-18 17:16 ` [PATCH 16/64] pata_efar: fix secondary port support Bartlomiej Zolnierkiewicz
2010-01-21  4:17   ` Jeff Garzik
2010-01-18 17:16 ` [PATCH 17/64] pata_efar: add locking for parallel scanning Bartlomiej Zolnierkiewicz
2010-01-18 17:16 ` [PATCH 18/64] pata_efar: enable parallel scan Bartlomiej Zolnierkiewicz
2010-01-18 17:16 ` [PATCH 19/64] pata_serverworks: fix PIO setup for the second channel Bartlomiej Zolnierkiewicz
2010-01-21  4:18   ` Jeff Garzik
2010-01-18 17:16 ` [PATCH 20/64] pata_serverworks: fix error message Bartlomiej Zolnierkiewicz
2010-01-18 17:16 ` [PATCH 21/64] pata_serverworks: cleanup cable detection Bartlomiej Zolnierkiewicz
2010-01-21  4:18   ` Jeff Garzik
2010-01-18 17:17 ` [PATCH 22/64] pata_via: fix address setup timings underlocking Bartlomiej Zolnierkiewicz
2010-01-18 18:00   ` Alan Cox
2010-01-21  4:19   ` Jeff Garzik
2010-01-18 17:17 ` [PATCH 23/64] pata_via: store UDMA masks in via_isa_bridges table Bartlomiej Zolnierkiewicz
2010-01-18 18:03   ` Alan Cox
2010-01-21  4:25   ` Jeff Garzik
2010-01-18 17:17 ` [PATCH 24/64] ide: fix for ide_timing quantisation errors Bartlomiej Zolnierkiewicz
2010-01-18 19:09   ` Sergei Shtylyov
2010-01-19  9:05     ` David Miller
2010-01-18 17:17 ` [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute() Bartlomiej Zolnierkiewicz
2010-01-18 19:11   ` Sergei Shtylyov
2010-01-19  9:25   ` David Miller
2010-01-19 15:09     ` Bartlomiej Zolnierkiewicz
2010-01-19 19:30       ` David Miller
2010-01-19 19:42       ` Sergei Shtylyov
2010-01-19 19:48         ` David Miller
2010-01-19 20:25           ` Bartlomiej Zolnierkiewicz
2010-01-18 17:17 ` [PATCH 26/64] alim15x3: fix PIO timings calculations Bartlomiej Zolnierkiewicz
2010-01-19  9:25   ` David Miller
2010-01-18 17:17 ` [PATCH 27/64] alim15x3: add ali_fifo_control() helper Bartlomiej Zolnierkiewicz
2010-01-19  9:25   ` David Miller
2010-01-18 17:17 ` [PATCH 28/64] alim15x3: remove superfluous locking from ali_set_pio_mode() Bartlomiej Zolnierkiewicz
2010-01-19  9:25   ` David Miller
2010-01-18 17:18 ` [PATCH 29/64] alim15x3: cleanup ali_cable_detect() Bartlomiej Zolnierkiewicz
2010-01-19  9:25   ` David Miller
2010-01-18 17:18 ` [PATCH 30/64] amd74xx: don't change UDMA settings when programming PIO timings Bartlomiej Zolnierkiewicz
2010-01-19  9:26   ` David Miller
2010-01-18 17:18 ` [PATCH 31/64] cmd64x: fix PIO and MWDMA timings calculations Bartlomiej Zolnierkiewicz
2010-01-19  9:26   ` David Miller
2010-01-18 17:18 ` [PATCH 32/64] cmd64x: remove superfluous checks from cmd64x_set_dma_mode() Bartlomiej Zolnierkiewicz
2010-01-19  9:26   ` David Miller
2010-01-18 17:18 ` [PATCH 33/64] cy82c693: fix PIO timings calculations Bartlomiej Zolnierkiewicz
2010-01-19  9:26   ` David Miller
2010-01-18 17:18 ` [PATCH 34/64] cy82c693: remove stale driver history Bartlomiej Zolnierkiewicz
2010-01-19  9:26   ` David Miller
2010-01-18 17:19 ` [PATCH 35/64] opti621: " Bartlomiej Zolnierkiewicz
2010-01-19  9:26   ` David Miller
2010-01-18 17:19 ` [PATCH 36/64] pdc202xx_old: add ->init_hwif method Bartlomiej Zolnierkiewicz
2010-01-19  9:26   ` David Miller
2010-01-18 17:19 ` [PATCH 37/64] serverworks: cleanup svwks_udma_filter() Bartlomiej Zolnierkiewicz
2010-01-19  9:26   ` David Miller
2010-01-18 17:19 ` [PATCH 38/64] serverworks: add missing pci_dev_put() call Bartlomiej Zolnierkiewicz
2010-01-19  9:27   ` David Miller
2010-01-18 17:19 ` [PATCH 39/64] via82cxxx: vx855 is a single channel controller Bartlomiej Zolnierkiewicz
2010-01-19  9:27   ` David Miller
2010-01-18 17:19 ` [PATCH 40/64] ide: add SATA cable detection support Bartlomiej Zolnierkiewicz
2010-01-19  9:42   ` David Miller
2010-01-18 17:19 ` [PATCH 41/64] via82cxxx: fix SATA cable detection Bartlomiej Zolnierkiewicz
2010-01-19  9:42   ` David Miller
2010-01-18 17:20 ` [PATCH 42/64] via82cxxx: workaround h/w bugs Bartlomiej Zolnierkiewicz
2010-01-19  9:42   ` David Miller
2010-01-18 17:20 ` [PATCH 43/64] via82cxxx: add support for vt8261 and future chips Bartlomiej Zolnierkiewicz
2010-01-19  9:42   ` David Miller
2010-01-18 17:20 ` [PATCH 44/64] via82cxxx: add support for VT6415 PCIE PATA IDE Host Controller Bartlomiej Zolnierkiewicz
2010-01-19  9:42   ` David Miller
2010-01-18 17:20 ` [PATCH 45/64] via82cxxx: fix UDMA settings programming Bartlomiej Zolnierkiewicz
2010-01-19  9:43   ` David Miller
2010-01-18 17:20 ` [PATCH 46/64] ide: add drive->pio_mode field Bartlomiej Zolnierkiewicz
2010-01-18 19:28   ` Sergei Shtylyov
2010-01-19 15:09     ` Bartlomiej Zolnierkiewicz
2010-01-21 17:48       ` Sergei Shtylyov
2010-01-19  9:43   ` David Miller
2010-01-18 17:20 ` Bartlomiej Zolnierkiewicz [this message]
2010-01-19  9:43   ` [PATCH 47/64] ide: add drive->dma_mode field David Miller
2010-04-12 14:12   ` Sergei Shtylyov
2010-01-18 17:20 ` [PATCH 48/64] ide: change ->set_pio_mode method parameters Bartlomiej Zolnierkiewicz
2010-01-19  9:45   ` David Miller
2010-01-18 17:20 ` [PATCH 49/64] ide: change ->set_dma_mode " Bartlomiej Zolnierkiewicz
2010-01-19  9:45   ` David Miller
2010-01-18 17:20 ` [PATCH 50/64] ide-timings: use ->pio_mode value to determine fastest PIO speed Bartlomiej Zolnierkiewicz
2010-01-19  9:48   ` David Miller
2010-01-18 17:21 ` [PATCH 51/64] alim15x3: fix handling of address setup timings Bartlomiej Zolnierkiewicz
2010-01-19  9:53   ` David Miller
2010-01-18 17:21 ` [PATCH 52/64] alim15x3: fix handling of command timings Bartlomiej Zolnierkiewicz
2010-01-19  9:53   ` David Miller
2010-01-18 17:21 ` [PATCH 53/64] alim15x3: fix handling of DMA timings Bartlomiej Zolnierkiewicz
2010-01-19  9:53   ` David Miller
2010-01-18 17:21 ` [PATCH 54/64] alim15x3: fix handling of UDMA enable bit Bartlomiej Zolnierkiewicz
2010-01-19  9:53   ` David Miller
2010-04-12 13:53   ` Sergei Shtylyov
2010-04-13 15:15     ` Bartlomiej Zolnierkiewicz
2010-01-18 17:21 ` [PATCH 55/64] amd74xx: use ->pio_mode value to determine pair device speed Bartlomiej Zolnierkiewicz
2010-01-19  9:53   ` David Miller
2010-01-18 17:21 ` [PATCH 56/64] cmd64x: fix handling of address setup timings Bartlomiej Zolnierkiewicz
2010-01-19  9:53   ` David Miller
2010-01-18 17:21 ` [PATCH 57/64] cs5535: use ->pio_mode value to determine pair device speed Bartlomiej Zolnierkiewicz
2010-01-19  9:54   ` David Miller
2010-01-18 17:21 ` [PATCH 58/64] cs5536: " Bartlomiej Zolnierkiewicz
2010-01-19  9:54   ` David Miller
2010-01-18 17:22 ` [PATCH 59/64] it821x: " Bartlomiej Zolnierkiewicz
2010-01-19  9:54   ` David Miller
2010-01-18 17:22 ` [PATCH 60/64] palm_bk3710: " Bartlomiej Zolnierkiewicz
2010-01-19  9:54   ` David Miller
2010-01-18 17:22 ` [PATCH 61/64] siimage: " Bartlomiej Zolnierkiewicz
2010-01-19  9:54   ` David Miller
2010-01-18 17:22 ` [PATCH 62/64] tx493xide: " Bartlomiej Zolnierkiewicz
2010-01-19  9:54   ` David Miller
2010-01-18 17:22 ` [PATCH 63/64] via82cxxx: " Bartlomiej Zolnierkiewicz
2010-01-19  9:54   ` David Miller
2010-01-18 17:22 ` [PATCH 64/64] ide: make ide_get_best_pio_mode() static Bartlomiej Zolnierkiewicz
2010-01-19  9:54   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100118172035.14623.50000.sendpatchset@localhost \
    --to=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).