From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bartlomiej Zolnierkiewicz Subject: [PATCH 63/64] via82cxxx: use ->pio_mode value to determine pair device speed Date: Mon, 18 Jan 2010 18:22:30 +0100 Message-ID: <20100118172230.14623.55986.sendpatchset@localhost> References: <20100118171349.14623.90030.sendpatchset@localhost> Return-path: In-Reply-To: <20100118171349.14623.90030.sendpatchset@localhost> Sender: linux-kernel-owner@vger.kernel.org To: linux-ide@vger.kernel.org Cc: Bartlomiej Zolnierkiewicz , linux-kernel@vger.kernel.org List-Id: linux-ide@vger.kernel.org From: Bartlomiej Zolnierkiewicz Subject: [PATCH] via82cxxx: use ->pio_mode value to determine pair device speed Use the current PIO mode value instead of the current transfer speed of the pair device on the port to determine PIO commmand timings used for both devices on the port. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/via82cxxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Index: b/drivers/ide/via82cxxx.c =================================================================== --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c @@ -199,7 +199,7 @@ static void via_set_drive(ide_hwif_t *hw ide_timing_compute(drive, speed, &t, T, UT); if (peer) { - ide_timing_compute(peer, peer->current_speed, &p, T, UT); + ide_timing_compute(peer, peer->pio_mode, &p, T, UT); ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); }