From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 24/68] ide: change ->cable_detect method return type to 'int'
Date: Fri, 29 Jan 2010 17:05:44 +0100 [thread overview]
Message-ID: <20100129160544.21495.34179.sendpatchset@localhost> (raw)
In-Reply-To: <20100129160308.21495.14120.sendpatchset@localhost>
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] ide: change ->cable_detect method return type to 'int'
Change ->cable_detect method return type to match ->cable_detect method
used in struct ata_port_operations.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/aec62xx.c | 2 +-
drivers/ide/alim15x3.c | 2 +-
drivers/ide/amd74xx.c | 2 +-
drivers/ide/atiixp.c | 2 +-
drivers/ide/cmd64x.c | 2 +-
drivers/ide/cs5535.c | 2 +-
drivers/ide/cs5536.c | 2 +-
drivers/ide/hpt366.c | 2 +-
drivers/ide/it8213.c | 2 +-
drivers/ide/it821x.c | 2 +-
drivers/ide/jmicron.c | 2 +-
drivers/ide/palm_bk3710.c | 2 +-
drivers/ide/pdc202xx_new.c | 2 +-
drivers/ide/pdc202xx_old.c | 2 +-
drivers/ide/piix.c | 2 +-
drivers/ide/pmac.c | 2 +-
drivers/ide/scc_pata.c | 2 +-
drivers/ide/serverworks.c | 2 +-
drivers/ide/siimage.c | 2 +-
drivers/ide/sis5513.c | 2 +-
drivers/ide/slc90e66.c | 2 +-
drivers/ide/tc86c001.c | 2 +-
drivers/ide/tx4939ide.c | 2 +-
drivers/ide/via82cxxx.c | 2 +-
include/linux/ide.h | 2 +-
25 files changed, 25 insertions(+), 25 deletions(-)
Index: b/drivers/ide/aec62xx.c
===================================================================
--- a/drivers/ide/aec62xx.c
+++ b/drivers/ide/aec62xx.c
@@ -160,7 +160,7 @@ static int init_chipset_aec62xx(struct p
return 0;
}
-static u8 atp86x_cable_detect(ide_hwif_t *hwif)
+static int atp86x_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
Index: b/drivers/ide/alim15x3.c
===================================================================
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -317,7 +317,7 @@ out:
* of UDMA66 transfers. It doesn't check the drives.
*/
-static u8 ali_cable_detect(ide_hwif_t *hwif)
+static int ali_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 cbl = ATA_CBL_PATA40, tmpbyte;
Index: b/drivers/ide/amd74xx.c
===================================================================
--- a/drivers/ide/amd74xx.c
+++ b/drivers/ide/amd74xx.c
@@ -178,7 +178,7 @@ static int init_chipset_amd74xx(struct p
return 0;
}
-static u8 amd_cable_detect(ide_hwif_t *hwif)
+static int amd_cable_detect(ide_hwif_t *hwif)
{
if ((amd_80w >> hwif->channel) & 1)
return ATA_CBL_PATA80;
Index: b/drivers/ide/atiixp.c
===================================================================
--- a/drivers/ide/atiixp.c
+++ b/drivers/ide/atiixp.c
@@ -120,7 +120,7 @@ static void atiixp_set_dma_mode(ide_hwif
spin_unlock_irqrestore(&atiixp_lock, flags);
}
-static u8 atiixp_cable_detect(ide_hwif_t *hwif)
+static int atiixp_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
u8 udma_mode = 0, ch = hwif->channel;
Index: b/drivers/ide/cmd64x.c
===================================================================
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -312,7 +312,7 @@ static int init_chipset_cmd64x(struct pc
return 0;
}
-static u8 cmd64x_cable_detect(ide_hwif_t *hwif)
+static int cmd64x_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01;
Index: b/drivers/ide/cs5535.c
===================================================================
--- a/drivers/ide/cs5535.c
+++ b/drivers/ide/cs5535.c
@@ -153,7 +153,7 @@ static void cs5535_set_pio_mode(ide_hwif
cs5535_set_speed(drive, drive->pio_mode);
}
-static u8 cs5535_cable_detect(ide_hwif_t *hwif)
+static int cs5535_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 bit;
Index: b/drivers/ide/cs5536.c
===================================================================
--- a/drivers/ide/cs5536.c
+++ b/drivers/ide/cs5536.c
@@ -110,7 +110,7 @@ static void cs5536_program_dtc(ide_drive
* Returns a cable type.
*/
-static u8 cs5536_cable_detect(ide_hwif_t *hwif)
+static int cs5536_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
u32 cfg;
Index: b/drivers/ide/hpt366.c
===================================================================
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -1215,7 +1215,7 @@ static int init_chipset_hpt366(struct pc
return 0;
}
-static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
+static int hpt3xx_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = hpt3xx_get_info(hwif->dev);
Index: b/drivers/ide/it8213.c
===================================================================
--- a/drivers/ide/it8213.c
+++ b/drivers/ide/it8213.c
@@ -140,7 +140,7 @@ static void it8213_set_dma_mode(ide_hwif
}
}
-static u8 it8213_cable_detect(ide_hwif_t *hwif)
+static int it8213_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 reg42h = 0;
Index: b/drivers/ide/it821x.c
===================================================================
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -423,7 +423,7 @@ static void it821x_set_dma_mode(ide_hwif
* the needed logic onboard.
*/
-static u8 it821x_cable_detect(ide_hwif_t *hwif)
+static int it821x_cable_detect(ide_hwif_t *hwif)
{
/* The reference driver also only does disk side */
return ATA_CBL_PATA80;
Index: b/drivers/ide/jmicron.c
===================================================================
--- a/drivers/ide/jmicron.c
+++ b/drivers/ide/jmicron.c
@@ -26,7 +26,7 @@ typedef enum {
* Returns the cable type.
*/
-static u8 jmicron_cable_detect(ide_hwif_t *hwif)
+static int jmicron_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
Index: b/drivers/ide/palm_bk3710.c
===================================================================
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -274,7 +274,7 @@ static void __devinit palm_bk3710_chipin
palm_bk3710_setpiomode(base, NULL, 1, 600, 0);
}
-static u8 palm_bk3710_cable_detect(ide_hwif_t *hwif)
+static int palm_bk3710_cable_detect(ide_hwif_t *hwif)
{
return ATA_CBL_PATA80;
}
Index: b/drivers/ide/pdc202xx_new.c
===================================================================
--- a/drivers/ide/pdc202xx_new.c
+++ b/drivers/ide/pdc202xx_new.c
@@ -180,7 +180,7 @@ static void pdcnew_set_pio_mode(ide_hwif
}
}
-static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
+static int pdcnew_cable_detect(ide_hwif_t *hwif)
{
if (get_indexed_reg(hwif, 0x0b) & 0x04)
return ATA_CBL_PATA40;
Index: b/drivers/ide/pdc202xx_old.c
===================================================================
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -103,7 +103,7 @@ static int pdc202xx_test_irq(ide_hwif_t
}
}
-static u8 pdc2026x_cable_detect(ide_hwif_t *hwif)
+static int pdc2026x_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10);
Index: b/drivers/ide/piix.c
===================================================================
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -243,7 +243,7 @@ static void ich_clear_irq(ide_drive_t *d
#include "../ata/ata_piix.h"
-static u8 piix_cable_detect(ide_hwif_t *hwif)
+static int piix_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30;
Index: b/drivers/ide/pmac.c
===================================================================
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -912,7 +912,7 @@ static int pmac_ide_do_resume(pmac_ide_h
return 0;
}
-static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
+static int pmac_ide_cable_detect(ide_hwif_t *hwif)
{
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
Index: b/drivers/ide/scc_pata.c
===================================================================
--- a/drivers/ide/scc_pata.c
+++ b/drivers/ide/scc_pata.c
@@ -754,7 +754,7 @@ static int __devinit scc_init_dma(ide_hw
return ide_allocate_dma_engine(hwif);
}
-static u8 scc_cable_detect(ide_hwif_t *hwif)
+static int scc_cable_detect(ide_hwif_t *hwif)
{
return ATA_CBL_PATA80;
}
Index: b/drivers/ide/serverworks.c
===================================================================
--- a/drivers/ide/serverworks.c
+++ b/drivers/ide/serverworks.c
@@ -301,7 +301,7 @@ static u8 ata66_svwks_cobalt(ide_hwif_t
return ATA_CBL_PATA40;
}
-static u8 svwks_cable_detect(ide_hwif_t *hwif)
+static int svwks_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
Index: b/drivers/ide/siimage.c
===================================================================
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -667,7 +667,7 @@ static void __devinit init_iops_siimage(
* Check for the presence of an ATA66 capable cable on the interface.
*/
-static u8 sil_cable_detect(ide_hwif_t *hwif)
+static int sil_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long addr = siimage_selreg(hwif, 0);
Index: b/drivers/ide/sis5513.c
===================================================================
--- a/drivers/ide/sis5513.c
+++ b/drivers/ide/sis5513.c
@@ -508,7 +508,7 @@ static int init_chipset_sis5513(struct p
#include "../ata/pata_sis.h"
-static u8 sis_cable_detect(ide_hwif_t *hwif)
+static int sis_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
u8 ata66 = 0;
Index: b/drivers/ide/slc90e66.c
===================================================================
--- a/drivers/ide/slc90e66.c
+++ b/drivers/ide/slc90e66.c
@@ -115,7 +115,7 @@ static void slc90e66_set_dma_mode(ide_hw
}
}
-static u8 slc90e66_cable_detect(ide_hwif_t *hwif)
+static int slc90e66_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02;
Index: b/drivers/ide/tc86c001.c
===================================================================
--- a/drivers/ide/tc86c001.c
+++ b/drivers/ide/tc86c001.c
@@ -130,7 +130,7 @@ static void tc86c001_dma_start(ide_drive
ide_dma_start(drive);
}
-static u8 tc86c001_cable_detect(ide_hwif_t *hwif)
+static int tc86c001_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long sc_base = pci_resource_start(dev, 5);
Index: b/drivers/ide/tx4939ide.c
===================================================================
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -189,7 +189,7 @@ static void tx4939ide_clear_irq(ide_driv
tx4939ide_writew(ctl, base, TX4939IDE_Int_Ctl);
}
-static u8 tx4939ide_cable_detect(ide_hwif_t *hwif)
+static int tx4939ide_cable_detect(ide_hwif_t *hwif)
{
void __iomem *base = TX4939IDE_BASE(hwif);
Index: b/drivers/ide/via82cxxx.c
===================================================================
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -352,7 +352,7 @@ static int init_chipset_via82cxxx(struct
#include "../ata/pata_via.h"
-static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
+static int via82cxxx_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
struct ide_host *host = pci_get_drvdata(pdev);
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -644,7 +644,7 @@ struct ide_port_ops {
u8 (*mdma_filter)(ide_drive_t *);
u8 (*udma_filter)(ide_drive_t *);
- u8 (*cable_detect)(struct hwif_s *);
+ int (*cable_detect)(struct hwif_s *);
};
struct ide_dma_ops {
next prev parent reply other threads:[~2010-01-29 16:05 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-29 16:03 [PATCH 00/68] ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:03 ` [PATCH 01/68] piix: add new short cable IDs Bartlomiej Zolnierkiewicz
2010-01-29 16:03 ` [PATCH 02/68] libata: CodingStyle fixes for ATA timings code Bartlomiej Zolnierkiewicz
2010-01-29 16:03 ` [PATCH 03/68] libata: move ATA timings code to ata-timings.c Bartlomiej Zolnierkiewicz
2010-01-29 16:03 ` [PATCH 04/68] ata: make ATA timings code independent of libata Bartlomiej Zolnierkiewicz
2010-01-29 16:03 ` [PATCH 05/68] ata: enable XFER_PIO_SLOW mode in ata_timing table Bartlomiej Zolnierkiewicz
2010-01-29 16:03 ` [PATCH 06/68] ide: switch to generic ATA timings code Bartlomiej Zolnierkiewicz
2010-01-29 16:03 ` [PATCH 07/68] pata_pcmcia: move IDs table to pata_pcmcia.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 08/68] ide-cs: use pata_pcmcia.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 09/68] ata_piix: factor out short cable detection code to ich_short_ata40() Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 10/68] ata_piix: move short cable handling to ata_piix.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 11/68] piix: use ata_piix.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 12/68] pata_ali: move short cable handling to pata_ali.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 13/68] alim15x3: use pata_ali.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 14/68] pata_sis: move short cable handling to pata_sis.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 15/68] sis5513: use pata_sis.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 16/68] pata_via: move short cable handling to pata_via.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 17/68] via82cxxx: use pata_via.h Bartlomiej Zolnierkiewicz
2010-01-29 16:05 ` [PATCH 18/68] ide: split host->dev table Bartlomiej Zolnierkiewicz
2010-01-29 16:05 ` [PATCH 19/68] ide: add hwif->port_no field Bartlomiej Zolnierkiewicz
2010-01-29 16:05 ` [PATCH 20/68] ide: add hwif->udma_mask field Bartlomiej Zolnierkiewicz
2010-01-29 16:05 ` [PATCH 21/68] ide: add hwif->private_data field Bartlomiej Zolnierkiewicz
2010-01-29 16:05 ` [PATCH 22/68] ide: add drive->devno field Bartlomiej Zolnierkiewicz
2010-01-29 16:05 ` [PATCH 23/68] ide: add drive->class field Bartlomiej Zolnierkiewicz
2010-01-29 16:05 ` Bartlomiej Zolnierkiewicz [this message]
2010-01-29 16:05 ` [PATCH 25/68] it8213: always program control bits Bartlomiej Zolnierkiewicz
2010-01-29 17:36 ` Sergei Shtylyov
2010-01-29 16:05 ` [PATCH 26/68] piix: " Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 27/68] slc90e66: " Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 28/68] add ide2libata header file Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 29/68] ata_piix: move code to be re-used by ide2libata to ata_piix.h Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 30/68] piix: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 31/68] pata_ali: move code to be re-used by ide2libata to pata_ali.h Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 32/68] alim15x3: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 33/68] pata_amd: move code to be re-used by ide2libata to pata_amd.h Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 34/68] amd74xx: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 35/68] pata_artop: move code to be re-used by ide2libata to pata_artop.h Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 36/68] aec62xx: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 37/68] pata_atiixp: move code to be re-used by ide2libata to pata_atiixp.h Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 38/68] atiixp: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 39/68] pata_cmd64x: documentation fix Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 40/68] pata_cmd64x: move code to be re-used by ide2libata to pata_cmd64x.h Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 41/68] pata_cmd64x: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 42/68] pata_cs5520: move code to be re-used by ide2libata to pata_cs5520.h Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 43/68] cs5520: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 44/68] pata_cs5530: move code to be re-used by ide2libata to pata_cs5530.h Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 45/68] cs5530: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 46/68] pata_cs5535: move code to be re-used by ide2libata to pata_cs5535.h Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 47/68] cs5535: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 48/68] pata_cypress: move code to be re-used by ide2libata to pata_cypress.h Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 49/68] cy82c693: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 50/68] pata_efar: move code to be re-used by ide2libata to pata_efar.h Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 51/68] slc90e66: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 52/68] pata_it8213: move code to be re-used by ide2libata to pata_it8213.h Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 53/68] it8213: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 54/68] pata_it821x: move code to be re-used by ide2libata to pata_it821x.h Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 55/68] it821x: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 56/68] pata_pdc202xx_old: move code to be re-used by ide2libata to pata_pdc202xx_old.h Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 57/68] pdc202xx_old: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 58/68] pata_sc1200: move code to be re-used by ide2libata to pata_sc1200.h Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 59/68] sc1200: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 60/68] pata_serverworks: move cable handling to pata_serverworks.h Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 61/68] serverworks: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 62/68] pata_sl82c105: move code to be re-used by ide2libata to pata_sl82c105.h Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 63/68] sl82c105: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:10 ` [PATCH 64/68] pata_triflex: move code to be re-used by ide2libata to pata_triflex.h Bartlomiej Zolnierkiewicz
2010-01-29 16:10 ` [PATCH 65/68] triflex: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:10 ` [PATCH 66/68] pata_via: factor out code for finding ISA bridge Bartlomiej Zolnierkiewicz
2010-01-29 16:10 ` [PATCH 67/68] pata_via: move code to be re-used by ide2libata to pata_via.h Bartlomiej Zolnierkiewicz
2010-01-29 16:10 ` [PATCH 68/68] via82cxxx: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 21:40 ` [PATCH 00/68] ide2libata Jeff Garzik
2010-01-29 22:24 ` Bartlomiej Zolnierkiewicz
2010-01-29 23:25 ` Alan Cox
2010-01-30 15:24 ` Bartlomiej Zolnierkiewicz
2010-02-01 7:47 ` David Miller
2010-02-01 9:31 ` Bartlomiej Zolnierkiewicz
2010-02-01 11:07 ` Alan Cox
2010-02-01 11:17 ` David Miller
2010-02-01 11:48 ` Alan Cox
2010-02-01 12:48 ` David Miller
2010-02-01 12:58 ` Alan Cox
2010-02-01 13:14 ` David Miller
2010-02-02 23:10 ` Jeff Garzik
2010-02-02 23:19 ` David Miller
2010-02-02 23:27 ` Alan Cox
2010-02-02 23:29 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100129160544.21495.34179.sendpatchset@localhost \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).