linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alan Cox <alan@linux.intel.com>
To: jeff@garzik.org.com, linux-kernel@vger.kernel.org,
	linux-ide@vger.kernel.org
Subject: [PATCH 3/5] Subject: [PATCH] pata_atiixp: add locking for parallel scanning
Date: Wed, 17 Feb 2010 13:17:31 +0000	[thread overview]
Message-ID: <20100217131703.16884.70560.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100217131532.16884.21696.stgit@localhost.localdomain>

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This is similar change as commit 60c3be3 for ata_piix host driver
and while pata_atiixp doesn't enable parallel scan yet the race
could probably also be triggered by requesting re-scanning of both
ports at the same time using SCSI sysfs interface.

[Ported to current tree without other patch dependancies by Alan Cox]

Original is
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This one is
Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/ata/pata_atiixp.c |   11 ++++++++++-
 1 files changed, 10 insertions(+), 1 deletions(-)


diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index ec44a12..7143cb0 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -1,7 +1,7 @@
 /*
  * pata_atiixp.c 	- ATI PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  (C) 2009 Bartlomiej Zolnierkiewicz
+ *			  (C) 2009-2010 Bartlomiej Zolnierkiewicz
  *
  * Based on
  *
@@ -46,6 +46,8 @@ static int atiixp_cable_detect(struct ata_port *ap)
 	return ATA_CBL_PATA40;
 }
 
+static DEFINE_SPINLOCK(atiixp_lock);
+
 /**
  *	atiixp_set_pio_timing	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -88,7 +90,10 @@ static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev,
 
 static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
+	unsigned long flags;
+	spin_lock_irqsave(&atiixp_lock, flags);
 	atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
+	spin_unlock_irqrestore(&atiixp_lock, flags);
 }
 
 /**
@@ -108,6 +113,9 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	int dma = adev->dma_mode;
 	int dn = 2 * ap->port_no + adev->devno;
 	int wanted_pio;
+	unsigned long flags;
+
+	spin_lock_irqsave(&atiixp_lock, flags);
 
 	if (adev->dma_mode >= XFER_UDMA_0) {
 		u16 udma_mode_data;
@@ -145,6 +153,7 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 
 	if (adev->pio_mode != wanted_pio)
 		atiixp_set_pio_timing(ap, adev, wanted_pio);
+	spin_unlock_irqrestore(&atiixp_lock, flags);
 }
 
 /**


  parent reply	other threads:[~2010-02-17 13:41 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-17 13:15 [PATCH 1/5] libata: Pass host flags into the pci helper Alan Cox
2010-02-17 13:16 ` [PATCH 2/5] Subject: [PATCH] pata_efar: add locking for parallel scanning Alan Cox
2010-03-01 20:12   ` Jeff Garzik
2010-02-17 13:17 ` Alan Cox [this message]
2010-02-17 13:17 ` [PATCH 4/5] pata_atiixp: enable parallel scan Alan Cox
2010-02-17 13:17 ` [PATCH 5/5] pata_efar: Enable PARALLEL_SCAN Alan Cox
2010-02-23  7:27 ` [PATCH 1/5] libata: Pass host flags into the pci helper Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100217131703.16884.70560.stgit@localhost.localdomain \
    --to=alan@linux.intel.com \
    --cc=jeff@garzik.org.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).