From: Randy Dunlap <randy.dunlap@oracle.com>
To: Mark Knecht <markknecht@gmail.com>
Cc: Tejun Heo <tj@kernel.org>, Paul Check <paul@thechecks.ca>,
Linux Kernel List <linux-kernel@vger.kernel.org>,
"linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>
Subject: Re: Drives missing at boot
Date: Tue, 3 Aug 2010 11:41:05 -0700 [thread overview]
Message-ID: <20100803114105.7f199878.randy.dunlap@oracle.com> (raw)
In-Reply-To: <AANLkTinwJLE=jjwG5zL8UBO91tzDpX36_W9GORKag8RK@mail.gmail.com>
On Mon, 2 Aug 2010 15:07:11 -0700 Mark Knecht wrote:
> On Thu, Jul 22, 2010 at 5:39 AM, Tejun Heo <tj@kernel.org> wrote:
>
> Hi Tejun,
> I'm finally home and trying to get back to this. I'm really a bad
> programmer so I don't know what I've done wrong but it seems patch
> isn't happy with me.
>
> c2stable linux # patch --dry-run -p1 <../ata_piix-sidpr-lock.patch
> patching file drivers/ata/ata_piix.c
> patch: **** malformed patch at line 13:
Whenever the patch file was saved on this system, line 13 of it was
split (probably by an email client). Whenever I see this, I just
join (merge) that line and the next one and try again... sometimes
several lines are malformed and have to be fixed like this.
>
> c2stable linux #
>
> Here's the change I tried to make to a copy of the file:
>
> c2stable linux # cat ../ata_piix-sidpr-lock.patch
> diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
> index 7409f98..3971bc0 100644
> --- a/drivers/ata/ata_piix.c
> +++ b/drivers/ata/ata_piix.c
> @@ -158,6 +158,7 @@ struct piix_map_db {
> struct piix_host_priv {
> const int *map;
> u32 saved_iocfg;
> + spinlock_t sidpr_lock; /* FIXME: remove once locking in EH is fixed */
> + printk("MWK - ata_sidpr patch applied!\n");
> void __iomem *sidpr;
> };
>
> @@ -951,12 +952,15 @@ static int piix_sidpr_scr_read(struct ata_link *link,
> unsigned int reg, u32 *val)
> {
> struct piix_host_priv *hpriv = link->ap->host->private_data;
> + unsigned long flags;
>
> if (reg >= ARRAY_SIZE(piix_sidx_map))
> return -EINVAL;
>
> + spin_lock_irqsave(&hpriv->sidpr_lock, flags);
> piix_sidpr_sel(link, reg);
> *val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
> + spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
> return 0;
> }
>
> @@ -964,12 +968,15 @@ static int piix_sidpr_scr_write(struct ata_link *link,
> unsigned int reg, u32 val)
> {
> struct piix_host_priv *hpriv = link->ap->host->private_data;
> + unsigned long flags;
>
> if (reg >= ARRAY_SIZE(piix_sidx_map))
> return -EINVAL;
>
> + spin_lock_irqsave(&hpriv->sidpr_lock, flags);
> piix_sidpr_sel(link, reg);
> iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
> + spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
> return 0;
> }
>
> @@ -1566,6 +1573,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
> hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
> if (!hpriv)
> return -ENOMEM;
> + spin_lock_init(&hpriv->sidpr_lock);
>
> /* Save IOCFG, this will be used for cable detection, quirk
> * detection and restoration on detach. This is necessary
> c2stable linux #
>
> Maybe you can shoot back something that's done correctly and I'll
> start testing.
>
> I've tried booting a few times. I've had 3 cold boot failures so
> far. No warm boot failures. Each time it failed on cold boot a warm
> boot fixed it.
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
next prev parent reply other threads:[~2010-08-03 18:42 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <AANLkTimVkG9TFgyOTTnrztBjqT4JoOzFaP268vWLAAm9@mail.gmail.com>
2010-07-03 16:01 ` Drives missing at boot Tejun Heo
2010-07-03 16:06 ` Mark Knecht
2010-07-03 16:13 ` Tejun Heo
2010-07-03 16:42 ` Mark Knecht
2010-07-05 6:30 ` Tejun Heo
2010-07-05 16:56 ` Mark Knecht
2010-07-06 6:33 ` Tejun Heo
2010-07-06 18:13 ` Mark Knecht
2010-07-07 5:50 ` Tejun Heo
2010-07-07 15:34 ` Mark Knecht
2010-07-07 15:48 ` Tejun Heo
2010-07-07 16:15 ` Mark Knecht
2010-07-07 16:19 ` Tejun Heo
2010-07-07 16:27 ` Mark Knecht
2010-07-07 17:06 ` Mark Knecht
2010-07-07 17:26 ` Tejun Heo
2010-07-07 17:32 ` Mark Knecht
2010-07-19 19:31 ` Mark Knecht
2010-07-19 21:01 ` Tejun Heo
2010-07-20 3:14 ` Paul Check
2010-07-20 14:14 ` Tejun Heo
2010-07-20 14:53 ` Mark Knecht
2010-07-20 16:16 ` Mark Knecht
2010-07-21 20:54 ` Mark Knecht
2010-07-21 21:22 ` Paul Check
2010-07-22 12:39 ` Tejun Heo
2010-08-02 22:07 ` Mark Knecht
2010-08-03 18:41 ` Randy Dunlap [this message]
2010-08-03 18:47 ` Mark Knecht
2010-08-03 18:55 ` Randy Dunlap
2010-08-04 16:16 ` Mark Knecht
2010-08-03 18:49 ` Jim Paris
2010-08-03 18:53 ` Mark Knecht
2010-07-20 20:52 ` Mark Knecht
2010-07-20 21:19 ` Paul Check
2010-07-20 21:26 ` Mark Knecht
2010-07-20 23:05 ` Paul Check
2010-07-03 18:56 ` Stan Hoeppner
2010-07-03 19:21 ` Mark Knecht
2010-07-03 19:42 ` Stan Hoeppner
2010-07-03 19:57 ` Mark Knecht
2010-07-03 22:31 ` Mark Knecht
2010-07-05 6:19 ` Tejun Heo
2010-07-05 16:48 ` Mark Knecht
2010-07-05 23:59 ` Robert Hancock
2010-07-06 4:16 ` Mark Knecht
2010-07-06 6:13 ` Stan Hoeppner
2010-07-06 11:26 ` Sander
2010-07-06 6:32 ` Tejun Heo
2010-07-03 20:15 ` Gene Heskett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100803114105.7f199878.randy.dunlap@oracle.com \
--to=randy.dunlap@oracle.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=markknecht@gmail.com \
--cc=paul@thechecks.ca \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox