From: Philippe De Muyter <phdm@macqel.be>
To: mikpe@it.uu.se, linux-ide@vger.kernel.org
Subject: promise tx2650 + ss1600 support
Date: Wed, 8 Dec 2010 11:21:13 +0100 [thread overview]
Message-ID: <20101208102113.GA9588@frolo.macqel> (raw)
Hello Mikael and list,
I am currently fighting with a Promise tx2650 raid controller + SuperSwap 1600
SATA-I/II enclosure on a linux 2.6.34.7 (opensuse 11.3) installation.
The installation seems to have detected a raid array :
# cat /proc/partitions
major minor #blocks name
8 0 244198584 sda
8 1 1 sda1
8 5 144585 sda5
8 6 4190208 sda6
8 7 238813184 sda7
8 16 244198584 sdb
8 17 1 sdb1
8 21 144585 sdb5
8 22 4190208 sdb6
8 23 238813184 sdb7
253 0 243164048 dm-0
253 1 243162112 dm-1
253 2 144585 dm-2
253 3 4190208 dm-3
253 4 238813184 dm-4
# mount
/dev/mapper/pdc_beaidahccb_part7 on / type ext4 (rw,acl,user_xattr)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
devtmpfs on /dev type devtmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,mode=1777)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/mapper/pdc_beaidahccb_part5 on /boot type ext4 (rw,acl,user_xattr)
securityfs on /sys/kernel/security type securityfs (rw)
but I do not know how to see that it works.
Also the leds on the enclosure do not show activity or raid status.
I also wonder why the sata_promise driver is not used (not listed by lsmod)
lspci says :
# lspci -v -s 02:00.0
02:00.0 RAID bus controller: Promise Technology, Inc. PDC42819 [FastTrak TX2650/TX4650]
Subsystem: Promise Technology, Inc. Device 3f21
Flags: bus master, fast devsel, latency 0, IRQ 17
I/O ports at cc00 [size=128]
I/O ports at c800 [size=256]
Memory at fbcff000 (32-bit, non-prefetchable) [size=4K]
Memory at fbcc0000 (32-bit, non-prefetchable) [size=128K]
Memory at fbcfc000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fbc80000 [disabled] [size=256K]
Capabilities: [50] Power Management version 2
Capabilities: [70] Express Legacy Endpoint, MSI 00
Capabilities: [94] SATA HBA v1.0
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-00-02-00-00-00-01
Capabilities: [170] Power Budgeting <?>
Kernel driver in use: ahci
# lspci -n -s 02:00.0
02:00.0 0104: 105a:3f20
Any suggestion ?
Thanks in advance
Philippe
--
Philippe De Muyter phdm at macqel dot be Tel +32 27029044
Macq Electronique SA rue de l'Aeronef 2 B-1140 Bruxelles Fax +32 27029077
next reply other threads:[~2010-12-08 10:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-08 10:21 Philippe De Muyter [this message]
[not found] ` <19711.33361.541394.839427@pilspetsen.it.uu.se>
2010-12-08 14:43 ` promise tx2650 + ss1600 + dmraid Philippe De Muyter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101208102113.GA9588@frolo.macqel \
--to=phdm@macqel.be \
--cc=linux-ide@vger.kernel.org \
--cc=mikpe@it.uu.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox