linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Roedel, Joerg" <Joerg.Roedel@amd.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: Steffen Moser <lists@steffen-moser.de>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Linux IDE mailing list <linux-ide@vger.kernel.org>
Subject: Re: IOMMU and DMA mode of pata_jmicron
Date: Mon, 3 Jan 2011 12:29:52 +0100	[thread overview]
Message-ID: <20110103112952.GA2100@amd.com> (raw)
In-Reply-To: <4D1A881C.3080109@garzik.org>

On Tue, Dec 28, 2010 at 08:00:12PM -0500, Jeff Garzik wrote:
> (CC'd linux-ide, Joerg)
> 
> On 12/28/2010 06:43 PM, Steffen Moser wrote:
> > I've encountered a problem with my AMD 890FX based system
> > and linux-2.6.35.10 (x86_64 platform).
> >
> > After activating the option "IOMMU" in the mainboard's BIOS
> > setup, the onboard P-ATA controller "JMicron Technology Corp.
> > JMB361 AHCI/IDE (rev 02)" puts itself back in the PIO mode.
> > When loading the module, the kernel reports:
> >
> >    pata_jmicron 0000:06:00.1: BMDMA: failed to set dma mask, \
> >                               falling back to PIO
> [...]
> > As soon as I deactivate IOMMU in BIOS setup, the P-ATA channel
> > runs in the DMA mode again. The S-ATA controllers don't seem
> > to be affected.
> >
> > My question is: Is this a known behavior? Are there any
> > things I have to consider when activating IOMMU (which seems
> > to be AMD-Vi) on an 890FX based system? Is it a problem of
> > the chipset and/or the controller or is it related to a
> > problem in the libata area?
> >
> > Some information about the affected system:
> >
> >  - Mainboard:    ASUS M4A89TD Pro/USB3
> >  - BIOS version: 1101 (most recent version)
> >  - Chipset:      AMD 890FX
> >  - Processor:    AMD Phenom 1090T
> >  - Memory:       4 x 4 GB (Kingston KVR1333D3E9S/4G)
> >  - Distribution: openSUSE 11.3
> >  - Kernel:       2.6.35.10 (from "kernel.org"), x86_64
> >
> 
> This condition occurs when the PCI API cannot set the PCI device's DMA 
> mask to the 32-bit value
> 	#define ATA_DMA_MASK            0xffffffffULL
> 
> That is an unusual failure for such a modern system, which certainly can 
> handle 32-bit masks like that, one would think.

Luckily I have exactly the same motherboard under my desk. It shows the
same issue. The problem is that the PCI device of the PATA controler
(4:00.1 in my case) is not described in the IVRS ACPI table. So the
IOMMU driver does not feel responsible for it and the dma_supported()
call on this device will fail. This also makes pci_set_dma_mask() fail
on this device. So it comes down to a BIOS bug. I look into it to find a
workaround.

	Joerg

-- 
AMD Operating System Research Center

Advanced Micro Devices GmbH Einsteinring 24 85609 Dornach
General Managers: Alberto Bozzo, Andrew Bowd
Registration: Dornach, Landkr. Muenchen; Registerger. Muenchen, HRB Nr. 43632


  reply	other threads:[~2011-01-03 11:30 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <4D1A7628.3050704@steffen-moser.de>
2010-12-29  1:00 ` IOMMU and DMA mode of pata_jmicron Jeff Garzik
2011-01-03 11:29   ` Roedel, Joerg [this message]
2011-01-03 20:15     ` Steffen Moser
2011-01-04 10:23       ` Roedel, Joerg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110103112952.GA2100@amd.com \
    --to=joerg.roedel@amd.com \
    --cc=jeff@garzik.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lists@steffen-moser.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).