From mboxrd@z Thu Jan 1 00:00:00 1970 From: fl-00@gmx.de Subject: Re: [PATCH] libata: Pioneer DVR-216D can't do SETXFER Date: Mon, 20 Jun 2011 14:44:42 +0200 Message-ID: <20110620124442.159870@gmx.net> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Return-path: Received: from mailout-de.gmx.net ([213.165.64.23]:38753 "HELO mailout-de.gmx.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1750945Ab1FTMop (ORCPT ); Mon, 20 Jun 2011 08:44:45 -0400 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Unluckily, the patch is done for the pioneer dvd-216d with firmware rev. 1.08. I'm an owner with firmware rev. 1.09 and the patch does not work for me. After some research I found lots of reports with various pioneer drives / variants concerning the same issue. 1) is it possible to include the dvd-216d with rev. 1.09 as well (or even better: with any revision) 2) is there some plan how to cope with such "broken" drives in general without the need to include every single drive in the code? Regards, Flo -- NEU: FreePhone - kostenlos mobil telefonieren! Jetzt informieren: http://www.gmx.net/de/go/freephone