From: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
To: linux-ide@vger.kernel.org
Cc: s.hauer@pengutronix.de, jgarzik@pobox.com
Subject: [patch 1/1] ata: Add iMX pata support
Date: Sat, 16 Jul 2011 23:04:08 +0200 [thread overview]
Message-ID: <20110716210420.234549871@rtp-net.org> (raw)
[-- Attachment #1: efika_pata_driver.patch --]
[-- Type: text/plain, Size: 8706 bytes --]
Add basic support for pata on iMX. It has been tested only on imx51.
SDMA support will probably be added later so this version supports only
PIO.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Index: linux-2.6-submit/drivers/ata/Kconfig
===================================================================
--- linux-2.6-submit.orig/drivers/ata/Kconfig 2011-07-16 22:29:41.000000000 +0200
+++ linux-2.6-submit/drivers/ata/Kconfig 2011-07-16 22:31:38.000000000 +0200
@@ -467,6 +467,15 @@ config PATA_ICSIDE
interface card. This is not required for ICS partition support.
If you are unsure, say N to this.
+config PATA_IMX
+ tristate "PATA support for Freescale iMX (Experimental)"
+ depends on ARCH_MX5 && EXPERIMENTAL
+ help
+ This option enables support for the PATA host available on Freescale
+ iMX SoCs.
+
+ If unsure, say N.
+
config PATA_IT8213
tristate "IT8213 PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
Index: linux-2.6-submit/drivers/ata/Makefile
===================================================================
--- linux-2.6-submit.orig/drivers/ata/Makefile 2011-07-16 22:29:41.000000000 +0200
+++ linux-2.6-submit/drivers/ata/Makefile 2011-07-16 22:31:38.000000000 +0200
@@ -48,6 +48,7 @@ obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x
obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o
obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
+obj-$(CONFIG_PATA_IMX) += pata_imx.o
obj-$(CONFIG_PATA_IT8213) += pata_it8213.o
obj-$(CONFIG_PATA_IT821X) += pata_it821x.o
obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o
Index: linux-2.6-submit/drivers/ata/pata_imx.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6-submit/drivers/ata/pata_imx.c 2011-07-16 22:35:41.000000000 +0200
@@ -0,0 +1,254 @@
+/*
+ * Freescale iMX PATA driver
+ *
+ * Copyright (C) 2011 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * Based on pata_platform - Copyright (C) 2006 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * TODO:
+ * - dmaengine support
+ * - check if timing stuff needed
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_host.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#define DRV_NAME "pata_imx"
+
+#define PATA_IMX_ATA_CONTROL 0x24
+#define PATA_IMX_ATA_CTRL_FIFO_RST_B (1<<7)
+#define PATA_IMX_ATA_CTRL_ATA_RST_B (1<<6)
+#define PATA_IMX_ATA_CTRL_IORDY_EN (1<<0)
+#define PATA_IMX_ATA_INT_EN 0x2C
+#define PATA_IMX_ATA_INTR_ATA_INTRQ2 (1<<3)
+#define PATA_IMX_DRIVE_DATA 0xA0
+#define PATA_IMX_DRIVE_CONTROL 0xD8
+
+struct pata_imx_priv {
+ struct clk *clk;
+ /* timings/interrupt/control regs */
+ u8 *host_regs;
+};
+
+static int pata_imx_set_mode(struct ata_link *link, struct ata_device **unused)
+{
+ struct ata_device *dev;
+
+ ata_for_each_dev(dev, link, ENABLED) {
+ dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ dev->flags |= ATA_DFLAG_PIO;
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
+ }
+ return 0;
+}
+
+static struct scsi_host_template pata_imx_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pata_imx_port_ops = {
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
+ .cable_detect = ata_cable_unknown,
+ .set_mode = pata_imx_set_mode,
+};
+
+static void pata_imx_setup_port(struct ata_ioports *ioaddr)
+{
+ /* Fixup the port shift for platforms that need it */
+ ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << 2);
+ ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << 2);
+ ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << 2);
+ ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << 2);
+ ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << 2);
+ ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << 2);
+ ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << 2);
+ ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << 2);
+ ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << 2);
+ ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << 2);
+}
+
+static int __devinit pata_imx_probe(struct platform_device *pdev)
+{
+ struct ata_host *host;
+ struct ata_port *ap;
+ struct pata_imx_priv *priv;
+ int irq = 0;
+ struct resource *io_res;
+ struct resource *irq_res;
+
+ io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (io_res == NULL)
+ return -EINVAL;
+
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (irq_res == NULL)
+ return -EINVAL;
+ irq = irq_res->start;
+
+ priv = kzalloc(sizeof(struct pata_imx_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->clk = clk_get(&pdev->dev, "imx-pata");
+ if (!priv->clk)
+ dev_warn(&pdev->dev, "Failed to get clock\n");
+ else
+ clk_enable(priv->clk);
+
+
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ goto free_priv;
+
+ host->private_data = priv;
+ ap = host->ports[0];
+
+ ap->ops = &pata_imx_port_ops;
+ /* pio 0-4 */
+ ap->pio_mask = ATA_PIO4;
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+
+ priv->host_regs = devm_ioremap(&pdev->dev, io_res->start, 0x40);
+ ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev,
+ io_res->start + PATA_IMX_DRIVE_DATA,
+ 0x20);
+ ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev,
+ io_res->start + PATA_IMX_DRIVE_CONTROL,
+ 0x04);
+ if (!priv->host_regs || !ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
+ dev_err(&pdev->dev, "failed to map IO/CTL base\n");
+ goto free_priv;
+ }
+
+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
+
+ pata_imx_setup_port(&ap->ioaddr);
+
+ ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
+ (unsigned long long)io_res->start + PATA_IMX_DRIVE_DATA,
+ (unsigned long long)io_res->start + PATA_IMX_DRIVE_CONTROL);
+
+ /* deassert resets */
+ __raw_writel(PATA_IMX_ATA_CTRL_FIFO_RST_B |
+ PATA_IMX_ATA_CTRL_ATA_RST_B |
+ PATA_IMX_ATA_CTRL_IORDY_EN,
+ priv->host_regs + PATA_IMX_ATA_CONTROL);
+ /* enable interrupts */
+ __raw_writel(PATA_IMX_ATA_INTR_ATA_INTRQ2,
+ priv->host_regs + PATA_IMX_ATA_INT_EN);
+
+ /* activate */
+ return ata_host_activate(host, irq, ata_sff_interrupt, 0,
+ &pata_imx_sht);
+
+free_priv:
+ if (priv->clk)
+ clk_disable(priv->clk);
+ kfree(priv);
+ return -ENOMEM;
+}
+
+static int __devexit pata_imx_remove(struct platform_device *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct pata_imx_priv *priv = host->private_data;
+
+ ata_host_detach(host);
+
+ __raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN);
+
+ if (priv->clk)
+ clk_disable(priv->clk);
+
+ kfree(priv);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int pata_imx_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ata_host *host = platform_get_drvdata(pdev);
+ struct pata_imx_priv *priv = host->private_data;
+ int ret;
+
+ ret = ata_host_suspend(host, PMSG_SUSPEND);
+
+ if (!ret)
+ __raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN);
+
+ if (priv->clk)
+ clk_disable(priv->clk);
+
+ return ret;
+}
+
+static int pata_imx_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ata_host *host = platform_get_drvdata(pdev);
+ struct pata_imx_priv *priv = host->private_data;
+
+ if (priv->clk)
+ clk_enable(priv->clk);
+
+ __raw_writel(PATA_IMX_ATA_CTRL_FIFO_RST_B |
+ PATA_IMX_ATA_CTRL_ATA_RST_B |
+ PATA_IMX_ATA_CTRL_IORDY_EN,
+ priv->host_regs + PATA_IMX_ATA_CONTROL);
+
+ __raw_writel(PATA_IMX_ATA_INTR_ATA_INTRQ2,
+ priv->host_regs + PATA_IMX_ATA_INT_EN);
+
+ ata_host_resume(host);
+
+ return 0;
+}
+
+static const struct dev_pm_ops pata_imx_pm_ops = {
+ .suspend = pata_imx_suspend,
+ .resume = pata_imx_resume,
+};
+#endif
+
+static struct platform_driver pata_imx_driver = {
+ .probe = pata_imx_probe,
+ .remove = __devexit_p(pata_imx_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &pata_imx_pm_ops,
+#endif
+ },
+};
+
+static int __init pata_imx_init(void)
+{
+ return platform_driver_register(&pata_imx_driver);
+}
+
+static void __exit pata_imx_exit(void)
+{
+ platform_driver_unregister(&pata_imx_driver);
+}
+module_init(pata_imx_init);
+module_exit(pata_imx_exit);
+
+MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
+MODULE_DESCRIPTION("low-level driver for iMX PATA");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
next reply other threads:[~2011-07-16 21:26 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-16 21:04 Arnaud Patard [this message]
2011-07-17 13:32 ` [patch 1/1] ata: Add iMX pata support Sergei Shtylyov
2011-07-21 15:59 ` Arnaud Patard
2011-07-22 11:56 ` Sergei Shtylyov
-- strict thread matches above, loose matches on Subject: below --
2011-07-22 10:46 Arnaud Patard
2011-07-22 11:52 ` Sergei Shtylyov
2011-07-26 14:58 Arnaud Patard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110716210420.234549871@rtp-net.org \
--to=arnaud.patard@rtp-net.org \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).