From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/3] pata_serverworks: use standard cable detection methods
Date: Tue, 11 Oct 2011 20:09:31 +0200 [thread overview]
Message-ID: <201110112009.32126.bzolnier@gmail.com> (raw)
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_serverworks: use standard cable detection methods
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
earlier references:
https://lkml.org/lkml/2009/11/25/375
drivers/ata/pata_serverworks.c | 45 ++++++++++-------------------------------
1 file changed, 12 insertions(+), 33 deletions(-)
Index: b/drivers/ata/pata_serverworks.c
===================================================================
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -64,7 +64,8 @@ static const char *csb_bad_ata100[] = {
* bits of the subsystem ID.
*/
-static int dell_cable(struct ata_port *ap) {
+static int dell_cable(struct ata_port *ap)
+{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
@@ -81,7 +82,8 @@ static int dell_cable(struct ata_port *a
* need to extend the Dell one in future
*/
-static int sun_cable(struct ata_port *ap) {
+static int sun_cable(struct ata_port *ap)
+{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
@@ -89,29 +91,6 @@ static int sun_cable(struct ata_port *ap
return ATA_CBL_PATA40;
}
-/**
- * osb4_cable - OSB4 cable detect
- * @ap: ATA port to check
- *
- * The OSB4 isn't UDMA66 capable so this is easy
- */
-
-static int osb4_cable(struct ata_port *ap) {
- return ATA_CBL_PATA40;
-}
-
-/**
- * csb_cable - CSB5/6 cable detect
- * @ap: ATA port to check
- *
- * Serverworks default arrangement is to use the drive side detection
- * only.
- */
-
-static int csb_cable(struct ata_port *ap) {
- return ATA_CBL_PATA_UNK;
-}
-
struct sv_cable_table {
int device;
int subvendor;
@@ -124,14 +103,14 @@ struct sv_cable_table {
*/
static struct sv_cable_table cable_detect[] = {
- { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, sun_cable },
- { PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, osb4_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, csb_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, csb_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, csb_cable },
- { PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, csb_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, sun_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, ata_cable_40wire },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, ata_cable_unknown },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, ata_cable_unknown },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, ata_cable_unknown },
+ { PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, ata_cable_unknown },
{ }
};
next reply other threads:[~2011-10-11 18:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-11 18:09 Bartlomiej Zolnierkiewicz [this message]
2011-10-11 19:49 ` [PATCH 1/3] pata_serverworks: use standard cable detection methods Alan Cox
2011-10-12 15:03 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201110112009.32126.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).