From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] pata_serverworks: cleanup cable detection
Date: Tue, 11 Oct 2011 20:11:44 +0200 [thread overview]
Message-ID: <201110112011.44748.bzolnier@gmail.com> (raw)
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_serverworks: cleanup cable detection
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
earlier references:
https://lkml.org/lkml/2010/1/18/324
drivers/ata/pata_serverworks.c | 37 +++++++------------------------------
1 file changed, 7 insertions(+), 30 deletions(-)
Index: b/drivers/ata/pata_serverworks.c
===================================================================
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -57,32 +57,14 @@ static const char *csb_bad_ata100[] = {
};
/**
- * dell_cable - Dell serverworks cable detection
+ * oem_cable - Dell/Sun serverworks cable detection
* @ap: ATA port to do cable detect
*
- * Dell hide the 40/80 pin select for their interfaces in the top two
- * bits of the subsystem ID.
+ * Dell PowerEdge and Sun Cobalt 'Alpine' hide the 40/80 pin select
+ * for their interfaces in the top two bits of the subsystem ID.
*/
-static int dell_cable(struct ata_port *ap)
-{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
- if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
- return ATA_CBL_PATA80;
- return ATA_CBL_PATA40;
-}
-
-/**
- * sun_cable - Sun Cobalt 'Alpine' cable detection
- * @ap: ATA port to do cable select
- *
- * Cobalt CSB5 IDE hides the 40/80pin in the top two bits of the
- * subsystem ID the same as dell. We could use one function but we may
- * need to extend the Dell one in future
- */
-
-static int sun_cable(struct ata_port *ap)
+static int oem_cable(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -97,15 +79,10 @@ struct sv_cable_table {
int (*cable_detect)(struct ata_port *ap);
};
-/*
- * Note that we don't copy the old serverworks code because the old
- * code contains obvious mistakes
- */
-
static struct sv_cable_table cable_detect[] = {
- { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, sun_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, oem_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, oem_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, oem_cable },
{ PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, ata_cable_40wire },
{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, ata_cable_unknown },
{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, ata_cable_unknown },
next reply other threads:[~2011-10-11 18:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-11 18:11 Bartlomiej Zolnierkiewicz [this message]
2011-10-11 19:51 ` [PATCH 2/3] pata_serverworks: cleanup cable detection Alan Cox
2011-10-12 15:05 ` Bartlomiej Zolnierkiewicz
2011-10-12 17:55 ` Alan Cox
2011-10-13 10:32 ` Bartlomiej Zolnierkiewicz
2011-10-13 12:50 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201110112011.44748.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).