From: Tejun Heo <tj@kernel.org>
To: Orson <orson.wellies@gmail.com>
Cc: linux-ide@vger.kernel.org, arieslee@jmicron.com
Subject: Re: JMicron Technology JMB362 JMB363 SError: { DevExch } ExpressCard, sometimes fails to boot
Date: Sun, 30 Oct 2011 14:12:40 -0700 [thread overview]
Message-ID: <20111030211240.GE7696@google.com> (raw)
In-Reply-To: <4E930916.6050503@gmail.com>
Hello,
(cc'ing Aries of jmicron)
On Mon, Oct 10, 2011 at 06:02:46PM +0300, Orson wrote:
> I tried my xpress54 card JMB362/363 on Debian Wheezy testing, with
> kernel 3.0.0-1-amd64 (Debian 3.0.0.-3).
>
> The card was inserted into the express slot without any external
> disk attached and I experienced the same problems I had been having
> with debian squeeze, perhaps even more consistently.
>
> I am now only using single port JMB 360 cards which operate flawlessly.
>
> I am attaching a kernel log with the said card inserted.
Hmmm.... it looks like the controller is continuously raising
connection status changed state and libata is faithfully trying to
probe whether new device appeared on the port. Does it work if you
plug an actual hard drive into the port? Looks more like wrong wiring
than anything else. Aries, any ideas?
ahci 0000:10:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:10:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:10:00.0: setting latency timer to 64
scsi1 : ahci
ata1: SATA max UDMA/133 abar m8192@0xd0000000 port 0xd0000100 irq 16
ata2: SATA max UDMA/133 abar m8192@0xd0000000 port 0xd0000180 irq 16
ata1: SATA link down (SStatus 0 SControOct 9 23:45:46 hp-laptop kernel: [ 1.414084] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
ata1: irq_stat 0x00000040, connection status changed
ata1: SError: { PHYInt CommWake DevExch }
ata1: hard resetting link
ata1: COMRESET failed (errno=-32)
ata1: reset failed (errno=-32), retrying in 8 secs
ata1: limiting SATA link speed to 1.5 Gbps
ata1: hard resetting link
ata1: SATA link down (SStatus 0 SControl 310)
ata1: EH complete
ata1: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
ata1: irq_stat 0x00000040, connection status changed
ata1: SError: { PHYInt CommWake DevExch }
ata1: hard resetting link
ata1: COMRESET failed (errno=-32)
ata1: reset failed (errno=-32), retrying in 8 secs
ata1: hard resetting link
ata1: SATA link down (SStatus 0 SControl 310)
ata1: EH complete
ata1: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
ata1: irq_stat 0x00000040, connection status changed
ata1: SError: { PHYInt CommWake DevExch }
ata1: limiting SATA link speed to 1.5 Gbps
ata1: hard resetting link
ata1: SATA link down (SStatus 0 SControl 310)
ata1: EH complete
ata1: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
ata1: irq_stat 0x00000040, connection status changed
ata1: SError: { PHYInt CommWake DevExch }
ata1: limiting SATA link speed to 1.5 Gbps
ata1: hard resetting link
ata1: SATA link down (SStatus 0 SControl 310)
ata1: EH complete
ata1: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0xe frozen
ata1: irq_stat 0x00000040, connection status changed
ata1: SError: { PHYInt CommWake DevExch }
ata1: limiting SATA link speed to 1.5 Gbps
ata1: hard resetting link
ata1: SATA link down (SStatus 0 SControl 310)
ata1: EH complete
(repeat...)
--
tejun
next prev parent reply other threads:[~2011-10-30 21:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-10 15:02 JMicron Technology JMB362 JMB363 SError: { DevExch } ExpressCard, sometimes fails to boot Orson
2011-10-30 21:12 ` Tejun Heo [this message]
2011-10-31 2:59 ` Aries Lee
2011-12-13 22:44 ` Jonathan Nieder
2011-12-16 2:52 ` Steven Chen
2011-12-16 2:55 ` Show lu
2011-12-16 9:58 ` Jonathan Nieder
2012-01-07 10:21 ` Orson
2012-01-09 6:37 ` Show lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111030211240.GE7696@google.com \
--to=tj@kernel.org \
--cc=arieslee@jmicron.com \
--cc=linux-ide@vger.kernel.org \
--cc=orson.wellies@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).