From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Lin Ming <ming.m.lin@intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>,
Alan Stern <stern@rowland.harvard.edu>, Tejun Heo <tj@kernel.org>,
linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
linux-pm@vger.kernel.org
Subject: Re: [RFC][PATCH 1/4] ahci: port legacy pm interface to struct dev_pm_ops
Date: Thu, 15 Dec 2011 20:53:10 +0100 [thread overview]
Message-ID: <201112152053.10535.rjw@sisk.pl> (raw)
In-Reply-To: <1323954769-3918-2-git-send-email-ming.m.lin@intel.com>
On Thursday, December 15, 2011, Lin Ming wrote:
> So we can add runtime pm callbacks later.
>
> Signed-off-by: Lin Ming <ming.m.lin@intel.com>
> ---
> drivers/ata/ahci.c | 61 +++++++++++++++++++++++++++++++++++-----------------
> 1 files changed, 41 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
> index cf26222..c745603 100644
> --- a/drivers/ata/ahci.c
> +++ b/drivers/ata/ahci.c
> @@ -84,8 +84,9 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
> static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
> unsigned long deadline);
> #ifdef CONFIG_PM
> -static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
> -static int ahci_pci_device_resume(struct pci_dev *pdev);
> +static int ahci_pci_device_suspend(struct device *dev);
> +static int ahci_pci_device_hibernate(struct device *dev);
> +static int ahci_pci_device_resume(struct device *dev);
> #endif
>
> static struct scsi_host_template ahci_sht = {
> @@ -400,6 +401,11 @@ static const struct pci_device_id ahci_pci_tbl[] = {
> { } /* terminate list */
> };
>
> +static struct dev_pm_ops ahci_pci_pm_ops = {
> + .suspend = ahci_pci_device_suspend,
> + .resume = ahci_pci_device_resume,
> + .poweroff = ahci_pci_device_hibernate,
> +};
So seem to have forgotten about .restore(). Please define it at least or
resume from hibernation will be broken.
Also, are .freeze() and .thaw() callbacks really unnecessary?
Rafael
> static struct pci_driver ahci_pci_driver = {
> .name = DRV_NAME,
> @@ -407,8 +413,9 @@ static struct pci_driver ahci_pci_driver = {
> .probe = ahci_init_one,
> .remove = ata_pci_remove_one,
> #ifdef CONFIG_PM
> - .suspend = ahci_pci_device_suspend,
> - .resume = ahci_pci_device_resume,
> + .driver = {
> + .pm = &ahci_pci_pm_ops
> + },
> #endif
> };
>
> @@ -567,37 +574,51 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
> }
>
> #ifdef CONFIG_PM
> -static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
> +static int ahci_pci_device_suspend_common(struct pci_dev *pdev, pm_message_t mesg)
> {
> struct ata_host *host = dev_get_drvdata(&pdev->dev);
> struct ahci_host_priv *hpriv = host->private_data;
> void __iomem *mmio = hpriv->mmio;
> u32 ctl;
>
> - if (mesg.event & PM_EVENT_SUSPEND &&
> - hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
> + /* AHCI spec rev1.1 section 8.3.3:
> + * Software must disable interrupts prior to requesting a
> + * transition of the HBA to D3 state.
> + */
> + ctl = readl(mmio + HOST_CTL);
> + ctl &= ~HOST_IRQ_EN;
> + writel(ctl, mmio + HOST_CTL);
> + readl(mmio + HOST_CTL); /* flush */
> +
> + return ata_pci_device_suspend(pdev, mesg);
> +}
> +
> +static int ahci_pci_device_suspend(struct device *dev)
> +{
> + struct ata_host *host = dev_get_drvdata(dev);
> + struct ahci_host_priv *hpriv = host->private_data;
> + struct pci_dev *pdev = to_pci_dev(dev);
> +
> + if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
> dev_err(&pdev->dev,
> "BIOS update required for suspend/resume\n");
> return -EIO;
> }
>
> - if (mesg.event & PM_EVENT_SLEEP) {
> - /* AHCI spec rev1.1 section 8.3.3:
> - * Software must disable interrupts prior to requesting a
> - * transition of the HBA to D3 state.
> - */
> - ctl = readl(mmio + HOST_CTL);
> - ctl &= ~HOST_IRQ_EN;
> - writel(ctl, mmio + HOST_CTL);
> - readl(mmio + HOST_CTL); /* flush */
> - }
> + return ahci_pci_device_suspend_common(pdev, PMSG_SUSPEND);
> +}
>
> - return ata_pci_device_suspend(pdev, mesg);
> +static int ahci_pci_device_hibernate(struct device *dev)
> +{
> + struct pci_dev *pdev = to_pci_dev(dev);
> +
> + return ahci_pci_device_suspend_common(pdev, PMSG_HIBERNATE);
> }
>
> -static int ahci_pci_device_resume(struct pci_dev *pdev)
> +static int ahci_pci_device_resume(struct device *dev)
> {
> - struct ata_host *host = dev_get_drvdata(&pdev->dev);
> + struct ata_host *host = dev_get_drvdata(dev);
> + struct pci_dev *pdev = to_pci_dev(dev);
> int rc;
>
> rc = ata_pci_device_do_resume(pdev);
>
next prev parent reply other threads:[~2011-12-15 19:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-15 13:12 [RFC][PATCH 0/4] ahci controller runtime PM support Lin Ming
2011-12-15 13:12 ` [RFC][PATCH 1/4] ahci: port legacy pm interface to struct dev_pm_ops Lin Ming
2011-12-15 19:53 ` Rafael J. Wysocki [this message]
2011-12-16 13:07 ` Lin Ming
2011-12-15 13:12 ` [RFC][PATCH 2/4] ahci: add runtime PM callbacks Lin Ming
2011-12-15 13:12 ` [RFC][PATCH 3/4] ata: runtime suspend port if no device attached Lin Ming
2011-12-15 13:12 ` [RFC][PATCH 4/4] ahci: support hot plug when port/controller is runtime suspended Lin Ming
2011-12-15 19:21 ` Tejun Heo
2011-12-15 23:29 ` Kay Sievers
2012-01-02 15:57 ` Matthew Garrett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201112152053.10535.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=ming.m.lin@intel.com \
--cc=stern@rowland.harvard.edu \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).