From: Dan Williams <dan.j.williams@intel.com>
To: linux-scsi@vger.kernel.org
Cc: linux-ide@vger.kernel.org
Subject: [PATCH v2 13/28] libsas: prevent double completion of scmds from eh
Date: Thu, 22 Dec 2011 18:59:36 -0800 [thread overview]
Message-ID: <20111223025936.21827.3264.stgit@localhost6.localdomain6> (raw)
In-Reply-To: <20111223025350.21827.85779.stgit@localhost6.localdomain6>
We invoke task->task_done() to free the task in the eh case, but at this
point we are prepared for scsi_eh_flush_done_q() to finish off the scmd.
Introduce sas_end_task() to capture the final response status from the
lldd and free the task.
Also take the opportunity to kill this warning.
drivers/scsi/libsas/sas_scsi_host.c: In function ‘sas_end_task’:
drivers/scsi/libsas/sas_scsi_host.c:102:3: warning: case value ‘2’ not in enumerated type ‘enum exec_status’ [-Wswitch]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
drivers/scsi/libsas/sas_scsi_host.c | 61 +++++++++++++++++++----------------
include/scsi/libsas.h | 5 ++-
2 files changed, 37 insertions(+), 29 deletions(-)
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 5e9fa99..6ee9826 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -49,27 +49,12 @@
#include <linux/scatterlist.h>
#include <linux/libata.h>
-/* ---------- SCSI Host glue ---------- */
-
-static void sas_scsi_task_done(struct sas_task *task)
+/* record final status and free the task */
+static void sas_end_task(struct scsi_cmnd *sc, struct sas_task *task)
{
struct task_status_struct *ts = &task->task_status;
- struct scsi_cmnd *sc = task->uldd_task;
int hs = 0, stat = 0;
- if (unlikely(task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
- /* Aborted tasks will be completed by the error handler */
- SAS_DPRINTK("task done but aborted\n");
- return;
- }
-
- if (unlikely(!sc)) {
- SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n");
- list_del_init(&task->list);
- sas_free_task(task);
- return;
- }
-
if (ts->resp == SAS_TASK_UNDELIVERED) {
/* transport error */
hs = DID_NO_CONNECT;
@@ -124,10 +109,32 @@ static void sas_scsi_task_done(struct sas_task *task)
break;
}
}
- ASSIGN_SAS_TASK(sc, NULL);
+
sc->result = (hs << 16) | stat;
+ ASSIGN_SAS_TASK(sc, NULL);
list_del_init(&task->list);
sas_free_task(task);
+}
+
+static void sas_scsi_task_done(struct sas_task *task)
+{
+ struct scsi_cmnd *sc = task->uldd_task;
+
+ if (unlikely(task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+ /* Aborted tasks will be completed by the error handler */
+ SAS_DPRINTK("task done but aborted\n");
+ return;
+ }
+
+ if (unlikely(!sc)) {
+ SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n");
+ list_del_init(&task->list);
+ sas_free_task(task);
+ return;
+ }
+
+ ASSIGN_SAS_TASK(sc, NULL);
+ sas_end_task(sc, task);
sc->scsi_done(sc);
}
@@ -236,18 +243,16 @@ static void sas_eh_finish_cmd(struct scsi_cmnd *cmd)
struct sas_task *task = TO_SAS_TASK(cmd);
struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(cmd->device->host);
- /* remove the aborted task flag to allow the task to be
- * completed now. At this point, we only get called following
- * an actual abort of the task, so we should be guaranteed not
- * to be racing with any completions from the LLD (hence we
- * don't need the task state lock to clear the flag) */
- task->task_state_flags &= ~SAS_TASK_STATE_ABORTED;
- /* Now call task_done. However, task will be free'd after
- * this */
- task->task_done(task);
+ /* At this point, we only get called following an actual abort
+ * of the task, so we should be guaranteed not to be racing with
+ * any completions from the LLD. Task is freed after this.
+ */
+ sas_end_task(cmd, task);
+
/* now finish the command and move it on to the error
* handler done list, this also takes it off the
- * error handler pending list */
+ * error handler pending list.
+ */
scsi_eh_finish_cmd(cmd, &sas_ha->eh_done_q);
}
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index d100503..6e9ad20 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -447,7 +447,10 @@ enum service_response {
};
enum exec_status {
- /* The SAM_STAT_.. codes fit in the lower 6 bits */
+ /* The SAM_STAT_.. codes fit in the lower 6 bits, alias some of
+ * them here to silence 'case value not in enumerated type' warnings
+ */
+ __SAM_STAT_CHECK_CONDITION = SAM_STAT_CHECK_CONDITION,
SAS_DEV_NO_RESPONSE = 0x80,
SAS_DATA_UNDERRUN,
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2011-12-23 2:59 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-23 2:58 [PATCH v2 00/28] libsas: eh reworks (ata-eh vs discovery, races, ...) Dan Williams
2011-12-23 2:58 ` [PATCH v2 01/28] libsas: remove unused ata_task_resp fields Dan Williams
2011-12-23 2:58 ` [PATCH v2 02/28] libsas: kill sas_slave_destroy Dan Williams
2011-12-23 2:58 ` [PATCH v2 03/28] libsas: fix domain_device leak Dan Williams
2011-12-23 2:58 ` [PATCH v2 04/28] libsas: fix leak of dev->sata_dev.identify_[packet_]device Dan Williams
2011-12-23 2:58 ` [PATCH v2 05/28] libsas: replace event locks with atomic bitops Dan Williams
2011-12-23 2:59 ` [PATCH v2 06/28] libsas: convert ha->state to flags Dan Williams
2011-12-23 2:59 ` [PATCH v2 07/28] libsas: introduce sas_drain_work() Dan Williams
2011-12-23 2:59 ` [PATCH v2 08/28] libsas: remove ata_port.lock management duties from lldds Dan Williams
2011-12-23 2:59 ` [PATCH v2 09/28] libsas: prevent domain rediscovery competing with ata error handling Dan Williams
2011-12-23 2:59 ` [PATCH v2 10/28] libsas: use ->set_dmamode to notify lldds of NCQ parameters Dan Williams
2011-12-23 2:59 ` [PATCH v2 11/28] libsas: kill invocation of scsi_eh_finish_cmd from sas_ata_task_done Dan Williams
2011-12-23 2:59 ` [PATCH v2 12/28] libsas: close error handling vs sas_ata_task_done() race Dan Williams
2011-12-23 2:59 ` Dan Williams [this message]
2011-12-23 2:59 ` [PATCH v2 14/28] libsas: fix timeout vs completion race Dan Williams
2011-12-23 2:59 ` [PATCH v2 15/28] libsas: let libata handle command timeouts Dan Williams
2011-12-23 2:59 ` [PATCH v2 16/28] libsas: defer SAS_TASK_NEED_DEV_RESET commands to libata Dan Williams
2011-12-23 2:59 ` [PATCH v2 17/28] libsas: use libata-eh-reset for sata rediscovery fis transmit failures Dan Williams
2011-12-23 3:00 ` [PATCH v2 18/28] libsas: perform sas-transport resets in shost->workq context Dan Williams
2011-12-23 3:00 ` [PATCH v2 19/28] libsas: execute transport link resets with libata-eh via host workqueue Dan Williams
2011-12-23 3:00 ` [PATCH v2 20/28] libsas: sas_phy_enable via transport_sas_phy_reset Dan Williams
2011-12-23 3:00 ` [PATCH v2 21/28] libsas: Remove redundant phy state notification calls Dan Williams
2011-12-23 3:00 ` [PATCH v2 22/28] libsas: add mutex for SMP task execution Dan Williams
2011-12-23 3:00 ` [PATCH v2 23/28] libsas: async ata-eh Dan Williams
2011-12-23 3:00 ` [PATCH v2 24/28] libsas: poll for ata device readiness after reset Dan Williams
2011-12-29 6:18 ` Jack Wang
2012-02-19 22:06 ` James Bottomley
2012-02-20 1:08 ` Jack Wang
2011-12-23 3:00 ` [PATCH v2 25/28] libsas: don't mark expanders as gone when a child device is removed Dan Williams
2011-12-23 3:00 ` [PATCH v2 26/28] libsas: check for 'gone' expanders in smp_execute_task() Dan Williams
2012-01-09 19:04 ` Dan Williams
2011-12-23 3:00 ` [PATCH v2 27/28] libsas: fix sas_find_local_phy(), take phy references Dan Williams
2011-12-27 9:21 ` Jack Wang
2011-12-28 18:45 ` Dan Williams
2011-12-29 6:18 ` Jack Wang
2011-12-23 3:00 ` [PATCH v2 28/28] libsas: don't recover 'gone' devices in sas_ata_hard_reset() Dan Williams
2011-12-27 9:23 ` Jack Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111223025936.21827.3264.stgit@localhost6.localdomain6 \
--to=dan.j.williams@intel.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).