linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2] ATA: sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs
@ 2013-07-30  2:46 Ezequiel Garcia
  2013-07-30  7:05 ` Andrew Lunn
  2013-07-30 13:04 ` Tejun Heo
  0 siblings, 2 replies; 4+ messages in thread
From: Ezequiel Garcia @ 2013-07-30  2:46 UTC (permalink / raw)
  To: linux-ide
  Cc: Tejun Heo, Andrew Lunn, Lior Amsalem, Thomas Petazzoni,
	Gregory Clement, Ezequiel Garcia

If CONFIG_HAVE_CLK is not selected, then all the clk API turn out
into no-ops. In other words, there's no need to have the ifdefs.

The only side-effect of this patch is the extra tiny kmalloc,
but that's not enough reason to have such ugly ifdefs all around
the code.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
---
Changes from v1:
 * Add a comment in struct mv_host_priv clarifying the optional clk fields.

 drivers/ata/sata_mv.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 10ea99a..231d510 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -553,10 +553,15 @@ struct mv_host_priv {
 	u32			irq_mask_offset;
 	u32			unmask_all_irqs;
 
-#if defined(CONFIG_HAVE_CLK)
+	/*
+	 * Needed on some devices that require their clocks to be enabled.
+	 * These are optional: if the platform device does not any clocks
+	 * they won't be used. Furthermore, if the underlying hardware does
+	 * not support the common clock framework (CONFIG_HAVE_CLK=n) then
+	 * all the clock operations become no-ops (see clk.h).
+	 */
 	struct clk		*clk;
 	struct clk              **port_clks;
-#endif
 	/*
 	 * These consistent DMA memory pools give us guaranteed
 	 * alignment for hardware-accessed data structures,
@@ -4032,9 +4037,7 @@ static int mv_platform_probe(struct platform_device *pdev)
 	struct resource *res;
 	int n_ports = 0, irq = 0;
 	int rc;
-#if defined(CONFIG_HAVE_CLK)
 	int port;
-#endif
 
 	ata_print_version_once(&pdev->dev, DRV_VERSION);
 
@@ -4068,13 +4071,11 @@ static int mv_platform_probe(struct platform_device *pdev)
 
 	if (!host || !hpriv)
 		return -ENOMEM;
-#if defined(CONFIG_HAVE_CLK)
 	hpriv->port_clks = devm_kzalloc(&pdev->dev,
 					sizeof(struct clk *) * n_ports,
 					GFP_KERNEL);
 	if (!hpriv->port_clks)
 		return -ENOMEM;
-#endif
 	host->private_data = hpriv;
 	hpriv->n_ports = n_ports;
 	hpriv->board_idx = chip_soc;
@@ -4084,7 +4085,6 @@ static int mv_platform_probe(struct platform_device *pdev)
 				   resource_size(res));
 	hpriv->base -= SATAHC0_REG_BASE;
 
-#if defined(CONFIG_HAVE_CLK)
 	hpriv->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(hpriv->clk))
 		dev_notice(&pdev->dev, "cannot get optional clkdev\n");
@@ -4098,7 +4098,6 @@ static int mv_platform_probe(struct platform_device *pdev)
 		if (!IS_ERR(hpriv->port_clks[port]))
 			clk_prepare_enable(hpriv->port_clks[port]);
 	}
-#endif
 
 	/*
 	 * (Re-)program MBUS remapping windows if we are asked to.
@@ -4124,7 +4123,6 @@ static int mv_platform_probe(struct platform_device *pdev)
 		return 0;
 
 err:
-#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
 		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
@@ -4135,7 +4133,6 @@ err:
 			clk_put(hpriv->port_clks[port]);
 		}
 	}
-#endif
 
 	return rc;
 }
@@ -4151,13 +4148,10 @@ err:
 static int mv_platform_remove(struct platform_device *pdev)
 {
 	struct ata_host *host = platform_get_drvdata(pdev);
-#if defined(CONFIG_HAVE_CLK)
 	struct mv_host_priv *hpriv = host->private_data;
 	int port;
-#endif
 	ata_host_detach(host);
 
-#if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
 		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
@@ -4168,7 +4162,6 @@ static int mv_platform_remove(struct platform_device *pdev)
 			clk_put(hpriv->port_clks[port]);
 		}
 	}
-#endif
 	return 0;
 }
 
-- 
1.8.1.5


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH v2] ATA: sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs
  2013-07-30  2:46 [PATCH v2] ATA: sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs Ezequiel Garcia
@ 2013-07-30  7:05 ` Andrew Lunn
  2013-07-30 13:04 ` Tejun Heo
  1 sibling, 0 replies; 4+ messages in thread
From: Andrew Lunn @ 2013-07-30  7:05 UTC (permalink / raw)
  To: Ezequiel Garcia
  Cc: linux-ide, Tejun Heo, Andrew Lunn, Lior Amsalem, Thomas Petazzoni,
	Gregory Clement

On Mon, Jul 29, 2013 at 11:46:03PM -0300, Ezequiel Garcia wrote:
> If CONFIG_HAVE_CLK is not selected, then all the clk API turn out
> into no-ops. In other words, there's no need to have the ifdefs.
> 
> The only side-effect of this patch is the extra tiny kmalloc,
> but that's not enough reason to have such ugly ifdefs all around
> the code.
> 
> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
> ---
> Changes from v1:
>  * Add a comment in struct mv_host_priv clarifying the optional clk fields.
> 
>  drivers/ata/sata_mv.c | 21 +++++++--------------
>  1 file changed, 7 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
> index 10ea99a..231d510 100644
> --- a/drivers/ata/sata_mv.c
> +++ b/drivers/ata/sata_mv.c
> @@ -553,10 +553,15 @@ struct mv_host_priv {
>  	u32			irq_mask_offset;
>  	u32			unmask_all_irqs;
>  
> -#if defined(CONFIG_HAVE_CLK)
> +	/*
> +	 * Needed on some devices that require their clocks to be enabled.
> +	 * These are optional: if the platform device does not any clocks

does not _have_ any clocks

Otherwise:

Acked-by: Andrew Lunn <andrew@lunn.ch>

	  Andrew

> +	 * they won't be used. Furthermore, if the underlying hardware does
> +	 * not support the common clock framework (CONFIG_HAVE_CLK=n) then
> +	 * all the clock operations become no-ops (see clk.h).
> +	 */
>  	struct clk		*clk;
>  	struct clk              **port_clks;
> -#endif
>  	/*
>  	 * These consistent DMA memory pools give us guaranteed
>  	 * alignment for hardware-accessed data structures,
> @@ -4032,9 +4037,7 @@ static int mv_platform_probe(struct platform_device *pdev)
>  	struct resource *res;
>  	int n_ports = 0, irq = 0;
>  	int rc;
> -#if defined(CONFIG_HAVE_CLK)
>  	int port;
> -#endif
>  
>  	ata_print_version_once(&pdev->dev, DRV_VERSION);
>  
> @@ -4068,13 +4071,11 @@ static int mv_platform_probe(struct platform_device *pdev)
>  
>  	if (!host || !hpriv)
>  		return -ENOMEM;
> -#if defined(CONFIG_HAVE_CLK)
>  	hpriv->port_clks = devm_kzalloc(&pdev->dev,
>  					sizeof(struct clk *) * n_ports,
>  					GFP_KERNEL);
>  	if (!hpriv->port_clks)
>  		return -ENOMEM;
> -#endif
>  	host->private_data = hpriv;
>  	hpriv->n_ports = n_ports;
>  	hpriv->board_idx = chip_soc;
> @@ -4084,7 +4085,6 @@ static int mv_platform_probe(struct platform_device *pdev)
>  				   resource_size(res));
>  	hpriv->base -= SATAHC0_REG_BASE;
>  
> -#if defined(CONFIG_HAVE_CLK)
>  	hpriv->clk = clk_get(&pdev->dev, NULL);
>  	if (IS_ERR(hpriv->clk))
>  		dev_notice(&pdev->dev, "cannot get optional clkdev\n");
> @@ -4098,7 +4098,6 @@ static int mv_platform_probe(struct platform_device *pdev)
>  		if (!IS_ERR(hpriv->port_clks[port]))
>  			clk_prepare_enable(hpriv->port_clks[port]);
>  	}
> -#endif
>  
>  	/*
>  	 * (Re-)program MBUS remapping windows if we are asked to.
> @@ -4124,7 +4123,6 @@ static int mv_platform_probe(struct platform_device *pdev)
>  		return 0;
>  
>  err:
> -#if defined(CONFIG_HAVE_CLK)
>  	if (!IS_ERR(hpriv->clk)) {
>  		clk_disable_unprepare(hpriv->clk);
>  		clk_put(hpriv->clk);
> @@ -4135,7 +4133,6 @@ err:
>  			clk_put(hpriv->port_clks[port]);
>  		}
>  	}
> -#endif
>  
>  	return rc;
>  }
> @@ -4151,13 +4148,10 @@ err:
>  static int mv_platform_remove(struct platform_device *pdev)
>  {
>  	struct ata_host *host = platform_get_drvdata(pdev);
> -#if defined(CONFIG_HAVE_CLK)
>  	struct mv_host_priv *hpriv = host->private_data;
>  	int port;
> -#endif
>  	ata_host_detach(host);
>  
> -#if defined(CONFIG_HAVE_CLK)
>  	if (!IS_ERR(hpriv->clk)) {
>  		clk_disable_unprepare(hpriv->clk);
>  		clk_put(hpriv->clk);
> @@ -4168,7 +4162,6 @@ static int mv_platform_remove(struct platform_device *pdev)
>  			clk_put(hpriv->port_clks[port]);
>  		}
>  	}
> -#endif
>  	return 0;
>  }
>  
> -- 
> 1.8.1.5
> 

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v2] ATA: sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs
  2013-07-30  2:46 [PATCH v2] ATA: sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs Ezequiel Garcia
  2013-07-30  7:05 ` Andrew Lunn
@ 2013-07-30 13:04 ` Tejun Heo
  2013-07-30 13:16   ` Ezequiel Garcia
  1 sibling, 1 reply; 4+ messages in thread
From: Tejun Heo @ 2013-07-30 13:04 UTC (permalink / raw)
  To: Ezequiel Garcia
  Cc: linux-ide, Andrew Lunn, Lior Amsalem, Thomas Petazzoni,
	Gregory Clement

On Mon, Jul 29, 2013 at 11:46:03PM -0300, Ezequiel Garcia wrote:
> If CONFIG_HAVE_CLK is not selected, then all the clk API turn out
> into no-ops. In other words, there's no need to have the ifdefs.
> 
> The only side-effect of this patch is the extra tiny kmalloc,
> but that's not enough reason to have such ugly ifdefs all around
> the code.
> 
> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>

Applied to libata/for-3.12 with Andrew's comment suggestion applied
and acked-by added.

Thanks.

-- 
tejun

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v2] ATA: sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs
  2013-07-30 13:04 ` Tejun Heo
@ 2013-07-30 13:16   ` Ezequiel Garcia
  0 siblings, 0 replies; 4+ messages in thread
From: Ezequiel Garcia @ 2013-07-30 13:16 UTC (permalink / raw)
  To: Tejun Heo
  Cc: linux-ide, Andrew Lunn, Lior Amsalem, Thomas Petazzoni,
	Gregory Clement

On Tue, Jul 30, 2013 at 09:04:11AM -0400, Tejun Heo wrote:
> On Mon, Jul 29, 2013 at 11:46:03PM -0300, Ezequiel Garcia wrote:
> > If CONFIG_HAVE_CLK is not selected, then all the clk API turn out
> > into no-ops. In other words, there's no need to have the ifdefs.
> > 
> > The only side-effect of this patch is the extra tiny kmalloc,
> > but that's not enough reason to have such ugly ifdefs all around
> > the code.
> > 
> > Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
> 
> Applied to libata/for-3.12 with Andrew's comment suggestion applied
> and acked-by added.
> 

Great, thanks for taking care of that.

-- 
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2013-07-30 13:16 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-07-30  2:46 [PATCH v2] ATA: sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs Ezequiel Garcia
2013-07-30  7:05 ` Andrew Lunn
2013-07-30 13:04 ` Tejun Heo
2013-07-30 13:16   ` Ezequiel Garcia

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).