From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: Re: [PATCH] ahci: imx: Fix imx_ahci_resume() Date: Tue, 27 May 2014 16:20:20 +0800 Message-ID: <20140527082019.GB8860@dragon> References: <1401132577-24999-1-git-send-email-fabio.estevam@freescale.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Return-path: Received: from mail-bn1blp0185.outbound.protection.outlook.com ([207.46.163.185]:2336 "EHLO na01-bn1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752681AbaE0IUd (ORCPT ); Tue, 27 May 2014 04:20:33 -0400 Content-Disposition: inline In-Reply-To: <1401132577-24999-1-git-send-email-fabio.estevam@freescale.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Fabio Estevam Cc: tj@kernel.org, linux-ide@vger.kernel.org, festevam@gmail.com On Mon, May 26, 2014 at 04:29:37PM -0300, Fabio Estevam wrote: > The following warning is seen after suspend/resume sequence: > > ------------[ cut here ]------------ > WARNING: CPU: 0 PID: 661 at drivers/ata/libahci.c:224 ahci_enable_ahci+0x74/0x8) > Modules linked in: > CPU: 0 PID: 661 Comm: sh Tainted: G W 3.15.0-rc5-next-20140521-000027 > Backtrace: > [<80011c90>] (dump_backtrace) from [<80011e2c>] (show_stack+0x18/0x1c) > r6:803a22f4 r5:00000000 r4:00000000 r3:00000000 > [<80011e14>] (show_stack) from [<80661e60>] (dump_stack+0x88/0xa4) > [<80661dd8>] (dump_stack) from [<80028fdc>] (warn_slowpath_common+0x70/0x94) > r5:00000009 r4:00000000 > [<80028f6c>] (warn_slowpath_common) from [<80029024>] (warn_slowpath_null+0x24/) > r8:808f68c4 r7:00000000 r6:00000000 r5:00000000 r4:e0810004 > [<80029000>] (warn_slowpath_null) from [<803a22f4>] (ahci_enable_ahci+0x74/0x80) > [<803a2280>] (ahci_enable_ahci) from [<803a2324>] (ahci_reset_controller+0x24/0) > r8:ddcd9410 r7:80351178 r6:ddcd9444 r5:dde8b850 r4:e0810000 r3:ddf35e90 > [<803a2300>] (ahci_reset_controller) from [<803a2c68>] (ahci_platform_resume_ho) > r7:80351178 r6:ddcd9444 r5:dde8b850 r4:ddcd9410 > [<803a2c30>] (ahci_platform_resume_host) from [<803a38f0>] (imx_ahci_resume+0x2) > r5:00000000 r4:ddcd9410 > [<803a38c4>] (imx_ahci_resume) from [<803511ac>] (platform_pm_resume+0x34/0x54) > .... > > Add the missing ahci_platform_resume_host() call in order to fix the resume > of the driver. As Bartlomiej already pointed out, you must mean ahci_platform_enable_resources() here. Even with it, I'm not sure this is correct. Calling ahci_platform_enable_resources() in .resume hook only makes sense in case that ahci_platform_disable_resources() is being called in .suspend hook. All ahci_platform_enable[disable]_resources() do is handling resources phy, clock and regulator, which should have been managed by imx_sata_enable[disable]() in imx case. > > Tested on imx6q-sabresd and imx53-qsb boards. I'm still wondering why I cannot reproduce the issue on my imx6q-sabresd board. Shawn > > Signed-off-by: Fabio Estevam > --- > drivers/ata/ahci_imx.c | 18 ++++++++++++++++-- > 1 file changed, 16 insertions(+), 2 deletions(-) > > diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c > index 8befeb6..1941896 100644 > --- a/drivers/ata/ahci_imx.c > +++ b/drivers/ata/ahci_imx.c > @@ -468,11 +468,25 @@ static int imx_ahci_resume(struct device *dev) > struct ahci_host_priv *hpriv = host->private_data; > int ret; > > - ret = imx_sata_enable(hpriv); > + ret = ahci_platform_enable_resources(hpriv); > if (ret) > return ret; > > - return ahci_platform_resume_host(dev); > + ret = imx_sata_enable(hpriv); > + if (ret) > + goto disable_resources; > + > + ret = ahci_platform_resume_host(dev); > + if (ret) > + goto disable_sata; > + > + return 0; > + > +disable_sata: > + imx_sata_disable(hpriv); > +disable_resources: > + ahci_platform_disable_resources(hpriv); > + return ret; > } > #endif > > -- > 1.8.3.2 >