From: Tycho Andersen <tycho@docker.com>
To: linux-ide@vger.kernel.org
Subject: hitting a WARN() in ata_host_activate on 4.13
Date: Tue, 19 Sep 2017 20:11:20 -0600 [thread overview]
Message-ID: <20170920021120.ldddwe3pd3ynizjd@smitten> (raw)
Hi all,
I've been playing with a Cavium ThunderX arm64 board on a stock 4.13 kernel and
I've hit the following warning:
[ 13.784242] ------------[ cut here ]------------
[ 13.784247] WARNING: CPU: 48 PID: 556 at drivers/ata/libata-core.c:6554 ata_host_activate+0x148/0x160
[ 13.784248] Modules linked in: drm(+) ahci(+) libahci thunder_bgx(+) thunder_xcv mdio_thunder mdio_cavium
[ 13.784260] CPU: 48 PID: 556 Comm: kworker/48:1 Tainted: G W 4.13.0+ #2
[ 13.784261] Hardware name: FOXCONN C2U1N/C2U1N_MB, BIOS G31FB12A 10/26/2016
[ 13.784265] Workqueue: events work_for_cpu_fn
[ 13.784268] task: ffff810f87ac4b00 task.stack: ffff810f8ec28000
[ 13.784270] PC is at ata_host_activate+0x148/0x160
[ 13.784272] LR is at ata_host_activate+0x70/0x160
[ 13.784274] pc : [<ffff00000875b378>] lr : [<ffff00000875b2a0>] pstate: 60400045
[ 13.784275] sp : ffff810f8ec2bbe0
[ 13.784276] x29: ffff810f8ec2bbe0 x28: ffff000000b26a48
[ 13.784279] x27: ffff000000b271e8 x26: ffff800f952930a0
[ 13.784283] x25: 0000000000000001 x24: 0000000000000080
[ 13.784286] x23: ffff000000b271e8 x22: ffff000000b203d8
[ 13.784289] x21: 0000000000000000 x20: ffff810f837d0f18
[ 13.784292] x19: 0000000000000000 x18: ffffffffffffffff
[ 13.784295] x17: ffff000000a897e8 x16: ffff000000a897e0
[ 13.784298] x15: ffff0000092f8c08 x14: 0088000000000000
[ 13.784301] x13: ffff000009481b79 x12: ffff00009317f000
[ 13.784304] x11: 0000000000000001 x10: 0000000000000001
[ 13.784307] x9 : 0000000000000000 x8 : ffff000053195500
[ 13.784310] x7 : 0000000000000000 x6 : 000000000000007f
[ 13.784313] x5 : 0000000000000080 x4 : ffff810f870c5600
[ 13.784316] x3 : ffff810f870c5b00 x2 : ffff800f95293330
[ 13.784319] x1 : 0000000000000040 x0 : 0000000000000000
[ 13.784323] Call trace:
[ 13.784325] Exception stack(0xffff810f8ec2b9f0 to 0xffff810f8ec2bb20)
[ 13.784327] b9e0: 0000000000000000 0001000000000000
[ 13.784330] ba00: 0000000002359000 ffff00000875b378 0000000060400045 ffff0000086d4780
[ 13.784333] ba20: ffff810f8ec2ba50 ffff0000086d4808 ffff810f870c5780 0000000000000008
[ 13.784335] ba40: ffff810f8ec2bad0 ffff0000086c4b0c ffff800f952930a0 0000000000000004
[ 13.784338] ba60: ffff800f95293170 0000000000000040 ffff0000092f8c08 0000000000016500
[ 13.784341] ba80: 0000000000000100 ffff800f952930a0 ffff810f8ec2bad0 ffff000000a8591c
[ 13.784343] baa0: ffff810f837d4000 0000000000040d00 0000000000000000 0000000000000040
[ 13.784346] bac0: ffff800f95293330 ffff810f870c5b00 ffff810f870c5600 0000000000000080
[ 13.784349] bae0: 000000000000007f 0000000000000000 ffff000053195500 0000000000000000
[ 13.784351] bb00: 0000000000000001 0000000000000001 ffff00009317f000 ffff000009481b79
[ 13.784354] [<ffff00000875b378>] ata_host_activate+0x148/0x160
[ 13.784365] [<ffff000000a87680>] ahci_host_activate+0x148/0x1c8 [libahci]
[ 13.784376] [<ffff000000b211b4>] ahci_init_one+0x7d4/0xda0 [ahci]
[ 13.784379] [<ffff00000856029c>] local_pci_probe+0x44/0xb0
[ 13.784382] [<ffff0000080ef0c0>] work_for_cpu_fn+0x20/0x30
[ 13.784385] [<ffff0000080f2850>] process_one_work+0x1e8/0x430
[ 13.784387] [<ffff0000080f2ce4>] worker_thread+0x24c/0x440
[ 13.784389] [<ffff0000080f9a08>] kthread+0x108/0x138
[ 13.784392] [<ffff0000080838e0>] ret_from_fork+0x10/0x30
[ 13.784393] ---[ end trace 6b8dd2026acce7bc ]---
lspci for the controller is below. Is this the right place to report the bug?
Any other information I can collect that would be useful?
Cheers,
Tycho
0001:00:08.0 SATA controller: Cavium, Inc. THUNDERX AHCI SATA Controller (rev 09) (prog-if 01 [AHCI 1.0])
Subsystem: Cavium, Inc. CN88XX AHCI SATA Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 814000000000 (32-bit, non-prefetchable) [size=2M]
Region 4: [virtual] Memory at 814000200000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM not supported, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI-X: Enable+ Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=000f0000
Capabilities: [98] #14 [0002]
Capabilities: [100 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 0
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [108 v1] Vendor Specific Information: ID=00a0 Rev=1 Len=040 <?>
Kernel driver in use: ahci
Kernel modules: ahci
next reply other threads:[~2017-09-20 2:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-20 2:11 Tycho Andersen [this message]
2017-09-20 22:23 ` hitting a WARN() in ata_host_activate on 4.13 Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170920021120.ldddwe3pd3ynizjd@smitten \
--to=tycho@docker.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox