Re: [PATCH v2] ata: ahci-platform: add reset control support

[Kunihiko Hayashi <hayashi.kunihiko@socionext.com>]

Sorry, please ignore this patch because of adding unneed lines.
I'll resend it.

Thank you,

On Tue, 27 Mar 2018 15:57:12 +0900
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> wrote:

> Add support to get and control a list of resets for the device
> as optional and shared. These resets must be kept de-asserted until
> the device is enabled.
> 
> This is specified as shared because some SoCs like UniPhier series
> have common reset controls with all ahci controller instances.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> Changes since v1:
> - add 'Reviewed-by:' lines
> 
> .../devicetree/bindings/ata/ahci-platform.txt      |  1 +
>  drivers/ata/ahci.h                                 |  1 +
>  drivers/ata/libahci_platform.c                     | 24 +++++++++++++++++++---
>  3 files changed, 23 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> index c760ecb..f4006d3 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
> +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> @@ -30,6 +30,7 @@ compatible:
>  Optional properties:
>  - dma-coherent      : Present if dma operations are coherent
>  - clocks            : a list of phandle + clock specifier pairs
> +- resets            : a list of phandle + reset specifier pairs
>  - target-supply     : regulator for SATA target power
>  - phys              : reference to the SATA PHY node
>  - phy-names         : must be "sata-phy"
> diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
> index a9d996e..4356ef1 100644
> --- a/drivers/ata/ahci.h
> +++ b/drivers/ata/ahci.h
> @@ -350,6 +350,7 @@ struct ahci_host_priv {
>  	u32			em_msg_type;	/* EM message type */
>  	bool			got_runtime_pm; /* Did we do pm_runtime_get? */
>  	struct clk		*clks[AHCI_MAX_CLKS]; /* Optional */
> +	struct reset_control	*rsts;		/* Optional */
>  	struct regulator	**target_pwrs;	/* Optional */
>  	/*
>  	 * If platform uses PHYs. There is a 1:1 relation between the port number and
> diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
> index 30cc8f1..46a7624 100644
> --- a/drivers/ata/libahci_platform.c
> +++ b/drivers/ata/libahci_platform.c
> @@ -25,6 +25,7 @@
>  #include <linux/phy/phy.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/of_platform.h>
> +#include <linux/reset.h>
>  #include "ahci.h"
>  
>  static void ahci_host_stop(struct ata_host *host);
> @@ -195,7 +196,8 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
>   * following order:
>   * 1) Regulator
>   * 2) Clocks (through ahci_platform_enable_clks)
> - * 3) Phys
> + * 3) Resets
> + * 4) Phys
>   *
>   * If resource enabling fails at any point the previous enabled resources
>   * are disabled in reverse order.
> @@ -215,12 +217,19 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
>  	if (rc)
>  		goto disable_regulator;
>  
> -	rc = ahci_platform_enable_phys(hpriv);
> +	rc = reset_control_deassert(hpriv->rsts);
>  	if (rc)
>  		goto disable_clks;
>  
> +	rc = ahci_platform_enable_phys(hpriv);
> +	if (rc)
> +		goto disable_resets;
> +
>  	return 0;
>  
> +disable_resets:
> +	reset_control_assert(hpriv->rsts);
> +
>  disable_clks:
>  	ahci_platform_disable_clks(hpriv);
>  
> @@ -239,12 +248,15 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
>   * following order:
>   * 1) Phys
>   * 2) Clocks (through ahci_platform_disable_clks)
> - * 3) Regulator
> + * 3) Resets
> + * 4) Regulator
>   */
>  void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
>  {
>  	ahci_platform_disable_phys(hpriv);
>  
> +	reset_control_assert(hpriv->rsts);
> +
>  	ahci_platform_disable_clks(hpriv);
>  
>  	ahci_platform_disable_regulators(hpriv);
> @@ -393,6 +405,12 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
>  		hpriv->clks[i] = clk;
>  	}
>  
> +	hpriv->rsts = devm_reset_control_array_get_optional_shared(dev);
> +	if (IS_ERR(hpriv->rsts)) {
> +		rc = PTR_ERR(hpriv->rsts);
> +		goto err_out;
> +	}
> +
>  	hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
>  
>  	/*
> -- 
> 2.7.4

---
Best Regards,
Kunihiko Hayashi