From: Hannes Reinecke <hare@suse.de>
To: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
linux-ide@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 25/40] libata-scsi: drop DPRINTK calls for cdb translation
Date: Tue, 3 Mar 2020 10:37:58 +0100 [thread overview]
Message-ID: <20200303093813.18523-26-hare@suse.de> (raw)
In-Reply-To: <20200303093813.18523-1-hare@suse.de>
Drop DPRINTK calls for cdb translation as they are already covered
by other traces, and convert the DPRINTK calls in ata_scsi_hotplug()
to ata_port_dbg() calls.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/ata/libata-scsi.c | 20 +++-----------------
1 file changed, 3 insertions(+), 17 deletions(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index eb2eb599e602..91b69ebef268 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1761,9 +1761,6 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc)
head = track % dev->heads;
sect = (u32)block % dev->sectors + 1;
- DPRINTK("block %u track %u cyl %u head %u sect %u\n",
- (u32)block, track, cyl, head, sect);
-
/* Check whether the converted CHS can fit.
Cylinder: 0-65535
Head: 0-15
@@ -1886,7 +1883,6 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc)
goto invalid_fld;
break;
default:
- DPRINTK("no-byte command\n");
fp = 0;
goto invalid_fld;
}
@@ -2040,7 +2036,6 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd,
early_finish:
ata_qc_free(qc);
cmd->scsi_done(cmd);
- DPRINTK("EXIT - early finish (good or error)\n");
return 0;
err_did:
@@ -2048,12 +2043,10 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd,
cmd->result = (DID_ERROR << 16);
cmd->scsi_done(cmd);
err_mem:
- DPRINTK("EXIT - internal\n");
return 0;
defer:
ata_qc_free(qc);
- DPRINTK("EXIT - defer\n");
if (rc == ATA_DEFER_LINK)
return SCSI_MLQUEUE_DEVICE_BUSY;
else
@@ -2820,8 +2813,6 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
struct ata_port *ap = qc->ap;
struct scsi_cmnd *cmd = qc->scsicmd;
- DPRINTK("ATAPI request sense\n");
-
memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
#ifdef CONFIG_ATA_SFF
@@ -2860,8 +2851,6 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
qc->complete_fn = atapi_sense_complete;
ata_qc_issue(qc);
-
- DPRINTK("EXIT\n");
}
/*
@@ -2971,7 +2960,6 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
if (scmd->sc_data_direction == DMA_TO_DEVICE) {
qc->tf.flags |= ATA_TFLAG_WRITE;
- DPRINTK("direction: write\n");
}
qc->tf.command = ATA_CMD_PACKET;
@@ -4355,8 +4343,6 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
return rc;
bad_cdb_len:
- DPRINTK("bad CDB len=%u, scsi_op=0x%02x, max=%u\n",
- scmd->cmd_len, scsi_op, dev->cdb_len);
scmd->result = DID_ERROR << 16;
scmd->scsi_done(scmd);
return 0;
@@ -4796,11 +4782,11 @@ void ata_scsi_hotplug(struct work_struct *work)
int i;
if (ap->pflags & ATA_PFLAG_UNLOADING) {
- DPRINTK("ENTER/EXIT - unloading\n");
+ ata_port_dbg(ap, "unloading\n");
return;
}
- DPRINTK("ENTER\n");
+ ata_port_dbg(ap, "ENTER\n");
mutex_lock(&ap->scsi_scan_mutex);
/* Unplug detached devices. We cannot use link iterator here
@@ -4816,7 +4802,7 @@ void ata_scsi_hotplug(struct work_struct *work)
ata_scsi_scan_host(ap, 0);
mutex_unlock(&ap->scsi_scan_mutex);
- DPRINTK("EXIT\n");
+ ata_port_dbg(ap, "EXIT\n");
}
/**
--
2.16.4
next prev parent reply other threads:[~2020-03-03 9:39 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-03 9:37 [PATCHv3 00/40] ata: kill ATA_DEBUG Hannes Reinecke
2020-03-03 9:37 ` [PATCH 01/40] libata: drop BPRINTK() Hannes Reinecke
2020-03-03 9:37 ` [PATCH 02/40] libata.h: whitespace and indentation fixes Hannes Reinecke
2020-03-03 9:37 ` [PATCH 03/40] libata-transport: Whitespace cleanup Hannes Reinecke
2020-03-03 9:37 ` [PATCH 04/40] libata: move ata_{port,link,dev}_dbg to standard dev_XXX() macros Hannes Reinecke
2020-03-24 13:26 ` Geert Uytterhoeven
2020-03-25 14:56 ` Bartlomiej Zolnierkiewicz
2020-03-25 15:34 ` Geert Uytterhoeven
2020-03-25 15:45 ` Bartlomiej Zolnierkiewicz
2020-03-25 16:54 ` Hannes Reinecke
2020-03-03 9:37 ` [PATCH 05/40] libata: move __func__ into ata_{port,link,dev}_dbg() helper Hannes Reinecke
2020-03-03 9:37 ` [PATCH 06/40] libata: remove pointless debugging messages Hannes Reinecke
2020-03-03 9:37 ` [PATCH 07/40] ata_piix: remove " Hannes Reinecke
2020-03-03 9:37 ` [PATCH 08/40] libata-core: remove pointless " Hannes Reinecke
2020-03-03 9:37 ` [PATCH 09/40] libata: Add ata_port_classify() helper Hannes Reinecke
2020-03-03 9:37 ` [PATCH 10/40] libata: move ata_dump_id() to dynamic debugging Hannes Reinecke
2020-03-03 9:37 ` [PATCH 11/40] libata: sanitize ATA_HORKAGE_DUMP_ID Hannes Reinecke
2020-03-03 9:37 ` [PATCH 12/40] sata_mv: replace DPRINTK with 'pci_dump' module parameter Hannes Reinecke
2020-03-03 9:37 ` [PATCH 13/40] sata_mv: kill 'port' argument in mv_dump_all_regs() Hannes Reinecke
2020-03-03 9:37 ` [PATCH 14/40] sata_sx4: move DPRINTK to VPRINTK Hannes Reinecke
2020-03-03 9:37 ` [PATCH 15/40] libata: add reset tracepoints Hannes Reinecke
2020-03-03 9:37 ` [PATCH 16/40] libata: drop DPRINTK() calls in reset Hannes Reinecke
2020-03-03 9:37 ` [PATCH 17/40] libata: tracepoints for bus-master DMA Hannes Reinecke
2020-03-03 9:37 ` [PATCH 18/40] libata: drop debugging statements " Hannes Reinecke
2020-03-03 9:37 ` [PATCH 19/40] pata_octeon_cf: add bmdma tracepoints and drop DPRINTK() calls Hannes Reinecke
2020-03-03 9:37 ` [PATCH 20/40] pata_arasan_cf: use generic tracepoints Hannes Reinecke
2020-03-03 9:37 ` [PATCH 21/40] sata_dwc_460ex: " Hannes Reinecke
2020-03-03 9:37 ` [PATCH 22/40] sata_nv: " Hannes Reinecke
2020-03-03 9:37 ` [PATCH 23/40] libata-sff: tracepoints for HSM state machine Hannes Reinecke
2020-03-03 9:37 ` [PATCH 24/40] libata-sff: add tracepoints for ata_sff_flush_pio_task() Hannes Reinecke
2020-03-03 9:37 ` Hannes Reinecke [this message]
2020-03-03 9:37 ` [PATCH 26/40] libata: add tracepoints for ATA error handling Hannes Reinecke
2020-03-03 9:38 ` [PATCH 27/40] libata: drop DPRINTK() calls during " Hannes Reinecke
2020-03-03 9:38 ` [PATCH 28/40] libata-eh: remove DPRINTK() calls for request sense Hannes Reinecke
2020-03-03 9:38 ` [PATCH 29/40] pata_octeon_cf: move DPRINTK to VPRINTK Hannes Reinecke
2020-03-03 9:38 ` [PATCH 30/40] pdc_adma: " Hannes Reinecke
2020-03-03 9:38 ` [PATCH 31/40] sata_rcar: " Hannes Reinecke
2020-03-03 9:38 ` [PATCH 32/40] sata_qstor: " Hannes Reinecke
2020-03-03 9:38 ` [PATCH 33/40] pata_pdc2027x: Replace PDPRINTK() with standard ata logging Hannes Reinecke
2020-03-03 9:38 ` [PATCH 34/40] sata_nv: move DPRINTK to ata debugging Hannes Reinecke
2020-03-03 9:38 ` [PATCH 35/40] sata_fsl: " Hannes Reinecke
2020-03-13 14:43 ` Guenter Roeck
2020-03-03 9:38 ` [PATCH 36/40] libata-core: " Hannes Reinecke
2020-03-03 9:38 ` [PATCH 37/40] libata: remove DPRINTK() macro Hannes Reinecke
2020-03-03 9:38 ` [PATCH 38/40] libata: kill ATA_MSG_INFO Hannes Reinecke
2020-03-03 9:38 ` [PATCH 39/40] libata: kill ATA_MSG_CTL Hannes Reinecke
2020-03-03 9:38 ` [PATCH 40/40] libata: remove references to ATA_DEBUG Hannes Reinecke
2020-03-12 14:04 ` [PATCHv3 00/40] ata: kill ATA_DEBUG Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200303093813.18523-26-hare@suse.de \
--to=hare@suse.de \
--cc=axboe@kernel.dk \
--cc=b.zolnierkie@samsung.com \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).