From: Hannes Reinecke <hare@suse.de>
To: Damien LeMoal <damien.lemoal@wdc.com>
Cc: linux-ide@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 49/68] pata_cmd64x: convert printk() calls
Date: Tue, 21 Dec 2021 08:21:12 +0100 [thread overview]
Message-ID: <20211221072131.46673-50-hare@suse.de> (raw)
In-Reply-To: <20211221072131.46673-1-hare@suse.de>
Convert printk() calls to structured logging.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/ata/pata_cmd64x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 1d74d89b5bed..5baa4a7819c1 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -116,7 +116,7 @@ static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 m
/* ata_timing_compute is smart and will produce timings for MWDMA
that don't violate the drives PIO capabilities. */
if (ata_timing_compute(adev, mode, &t, T, 0) < 0) {
- printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
+ ata_dev_err(adev, DRV_NAME ": mode computation failed.\n");
return;
}
if (ap->port_no) {
@@ -130,7 +130,7 @@ static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 m
}
}
- printk(KERN_DEBUG DRV_NAME ": active %d recovery %d setup %d.\n",
+ ata_dev_dbg(adev, DRV_NAME ": active %d recovery %d setup %d.\n",
t.active, t.recover, t.setup);
if (t.recover > 16) {
t.active += t.recover - 16;
--
2.29.2
next prev parent reply other threads:[~2021-12-21 7:23 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-21 7:20 [PATCHv3 00/68] libata: rework logging, take II Hannes Reinecke
2021-12-21 7:20 ` [PATCH 01/68] libata: remove pointless debugging messages Hannes Reinecke
2021-12-21 7:20 ` [PATCH 02/68] libata: whitespace cleanup Hannes Reinecke
2021-12-21 7:20 ` [PATCH 03/68] libata: Add ata_port_classify() helper Hannes Reinecke
2021-12-30 5:12 ` Damien Le Moal
2021-12-21 7:20 ` [PATCH 04/68] libata: move ata_dump_id() to dynamic debugging Hannes Reinecke
2021-12-21 7:20 ` [PATCH 05/68] libata: sanitize ATA_HORKAGE_DUMP_ID Hannes Reinecke
2021-12-21 7:20 ` [PATCH 06/68] libata: add reset tracepoints Hannes Reinecke
2021-12-21 7:20 ` [PATCH 07/68] libata: add qc_prep tracepoint Hannes Reinecke
2021-12-21 7:20 ` [PATCH 08/68] libata: tracepoints for bus-master DMA Hannes Reinecke
2021-12-30 5:13 ` Damien Le Moal
2021-12-21 7:20 ` [PATCH 09/68] libata-sff: tracepoints for HSM state machine Hannes Reinecke
2021-12-21 7:20 ` [PATCH 10/68] libata-scsi: drop DPRINTK calls for cdb translation Hannes Reinecke
2021-12-21 7:20 ` [PATCH 11/68] libata: add tracepoints for ATA error handling Hannes Reinecke
2021-12-21 7:20 ` [PATCH 12/68] libata: move ata_{port,link,dev}_dbg to standard dev_XXX() macros Hannes Reinecke
2021-12-21 7:20 ` [PATCH 13/68] libata: revamp ata_get_cmd_descript() Hannes Reinecke
2021-12-30 5:13 ` Damien Le Moal
2021-12-21 7:20 ` [PATCH 14/68] libata: move DPRINTK to ata debugging Hannes Reinecke
2021-12-21 7:20 ` [PATCH 15/68] sata_mv: kill 'port' argument in mv_dump_all_regs() Hannes Reinecke
2021-12-21 7:20 ` [PATCH 16/68] sata_mv: replace DPRINTK with dynamic debugging Hannes Reinecke
2021-12-21 7:20 ` [PATCH 17/68] pata_octeon_cf: remove DPRINTK() macro in interrupt context Hannes Reinecke
2021-12-21 7:20 ` [PATCH 18/68] pdc_adma: Remove DPRINTK call Hannes Reinecke
2021-12-21 7:20 ` [PATCH 19/68] sata_fsl: move DPRINTK to ata debugging Hannes Reinecke
2021-12-21 7:20 ` [PATCH 20/68] sata_rcar: replace DPRINTK() with ata_port_dbg() Hannes Reinecke
2021-12-21 7:20 ` [PATCH 21/68] sata_qstor: " Hannes Reinecke
2021-12-21 7:20 ` [PATCH 22/68] pata_pdc2027x: Replace PDPRINTK() with standard ata logging Hannes Reinecke
2021-12-21 7:20 ` [PATCH 23/68] libata: remove pointless VPRINTK() calls Hannes Reinecke
2021-12-21 7:20 ` [PATCH 24/68] ahci: Drop pointless VPRINTK() calls and convert the remaining ones Hannes Reinecke
2021-12-21 7:20 ` [PATCH 25/68] pdc_adma: Drop pointless VPRINTK() calls and remove disabled NCQ debugging Hannes Reinecke
2021-12-21 7:20 ` [PATCH 26/68] pata_octeon_cf: Drop pointless VPRINTK() calls and convert the remaining one Hannes Reinecke
2021-12-21 7:20 ` [PATCH 27/68] pata_via: Drop pointless VPRINTK() calls Hannes Reinecke
2021-12-21 7:20 ` [PATCH 28/68] sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones Hannes Reinecke
2021-12-21 7:20 ` [PATCH 29/68] sata_qstor: Drop pointless VPRINTK() calls Hannes Reinecke
2021-12-21 7:20 ` [PATCH 30/68] sata_rcar: " Hannes Reinecke
2021-12-21 7:20 ` [PATCH 31/68] sata_inic162x: " Hannes Reinecke
2021-12-21 7:20 ` [PATCH 32/68] sata_mv: Drop pointless VPRINTK() call and convert the remaining one Hannes Reinecke
2021-12-21 7:20 ` [PATCH 33/68] sata_nv: drop pointless VPRINTK() calls and convert remaining ones Hannes Reinecke
2021-12-21 7:20 ` [PATCH 34/68] sata_fsl: convert VPRINTK() calls to ata_port_dbg() Hannes Reinecke
2021-12-21 7:20 ` [PATCH 35/68] sata_sil: Drop pointless VPRINTK() calls Hannes Reinecke
2021-12-21 7:20 ` [PATCH 36/68] sata_sx4: Drop pointless VPRINTK() calls and convert the remaining ones Hannes Reinecke
2021-12-21 7:21 ` [PATCH 37/68] sata_sx4: add module parameter 'dimm_test' Hannes Reinecke
2021-12-21 7:21 ` [PATCH 38/68] libata: drop ata_msg_error() and ata_msg_intr() Hannes Reinecke
2021-12-21 7:21 ` [PATCH 39/68] libata: drop ata_msg_ctl() Hannes Reinecke
2021-12-21 7:21 ` [PATCH 40/68] libata: drop ata_msg_malloc() Hannes Reinecke
2021-12-21 7:21 ` [PATCH 41/68] libata: drop ata_msg_warn() Hannes Reinecke
2021-12-21 7:21 ` [PATCH 42/68] libata: drop ata_msg_probe() Hannes Reinecke
2021-12-21 7:21 ` [PATCH 43/68] libata: drop ata_msg_info() Hannes Reinecke
2021-12-23 9:48 ` Sergey Shtylyov
2021-12-23 18:47 ` Sergey Shtylyov
2021-12-30 5:20 ` Damien Le Moal
2021-12-21 7:21 ` [PATCH 44/68] libata: drop ata_msg_drv() Hannes Reinecke
2021-12-21 7:21 ` [PATCH 45/68] libata: remove 'new' ata message handling Hannes Reinecke
2021-12-21 7:21 ` [PATCH 46/68] libata: remove debug compilation switches Hannes Reinecke
2021-12-21 7:21 ` [PATCH 47/68] pata_atp867x: convert printk() calls Hannes Reinecke
2021-12-21 7:21 ` [PATCH 48/68] pata_cmd640: " Hannes Reinecke
2021-12-21 7:21 ` Hannes Reinecke [this message]
2021-12-21 7:21 ` [PATCH 50/68] pata_cs5520: " Hannes Reinecke
2021-12-21 7:21 ` [PATCH 51/68] pata_cs5536: " Hannes Reinecke
2021-12-21 7:21 ` [PATCH 52/68] pata_cypress: " Hannes Reinecke
2021-12-21 7:21 ` [PATCH 53/68] pata_it821x: " Hannes Reinecke
2021-12-21 7:21 ` [PATCH 54/68] pata_marvell: " Hannes Reinecke
2021-12-21 7:21 ` [PATCH 55/68] pata_rz1000: " Hannes Reinecke
2021-12-21 7:21 ` [PATCH 56/68] pata_serverworks: " Hannes Reinecke
2021-12-21 7:21 ` [PATCH 57/68] pata_sil680: " Hannes Reinecke
2021-12-21 7:21 ` [PATCH 58/68] sata_sx4: " Hannes Reinecke
2021-12-21 7:21 ` [PATCH 59/68] sata_mv: convert remaining printk() to structured logging Hannes Reinecke
2021-12-21 7:21 ` [PATCH 60/68] pata_hpt37x: convert pr_XXX() calls Hannes Reinecke
2021-12-21 7:21 ` [PATCH 61/68] pata_octeon_cf: Replace pr_XXX() calls with structured logging Hannes Reinecke
2021-12-21 7:21 ` [PATCH 62/68] pata_hpt3x2n: convert pr_XXX() calls Hannes Reinecke
2021-12-21 7:21 ` [PATCH 63/68] sata_gemini: convert pr_err() calls Hannes Reinecke
2021-12-21 7:21 ` [PATCH 64/68] pata_hpt366: convert pr_warn() calls Hannes Reinecke
2021-12-21 7:21 ` [PATCH 65/68] libata-scsi: rework ata_dump_status to avoid using pr_cont() Hannes Reinecke
2021-12-30 5:13 ` Damien Le Moal
2021-12-21 7:21 ` [PATCH 66/68] sata_dwc_460ex: drop DEBUG_NCQ Hannes Reinecke
2021-12-21 7:21 ` [PATCH 67/68] sata_dwc_460ex: remove 'check_status' argument Hannes Reinecke
2021-12-21 7:21 ` [PATCH 68/68] sata_dwc_460ex: Remove debug compile options Hannes Reinecke
2021-12-30 5:19 ` [PATCHv3 00/68] libata: rework logging, take II Damien Le Moal
2021-12-30 13:47 ` Hannes Reinecke
2021-12-31 4:49 ` Damien Le Moal
2021-12-31 9:45 ` Hannes Reinecke
-- strict thread matches above, loose matches on Subject: below --
2021-12-10 7:27 [PATCHv2 " Hannes Reinecke
2021-12-10 7:28 ` [PATCH 49/68] pata_cmd64x: convert printk() calls Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211221072131.46673-50-hare@suse.de \
--to=hare@suse.de \
--cc=damien.lemoal@wdc.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).