[PATCH v5 2/2] ata: pata_artop: use *switch* in atp8xx_fixup()

[Sergey Shtylyov <s.shtylyov@omp.ru>]

This driver uses a string of the *if* statements in atp8xx_fixup() where
a *switch* statement would fit better...

Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
---

Changes in version 5:
- fixed up #define DRV_VERSION;
- added "ata: " prefix to the patch subject.

Changes in version 4:
- new patch.

 drivers/ata/pata_artop.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 08e88403d0ab..20a8f31a3f57 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -28,7 +28,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_artop"
-#define DRV_VERSION	"0.4.7"
+#define DRV_VERSION	"0.4.8"
 
 /*
  *	The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -315,12 +315,15 @@ static struct ata_port_operations artop6260_ops = {
 
 static void atp8xx_fixup(struct pci_dev *pdev)
 {
-	if (pdev->device == 0x0005)
+	u8 reg;
+
+	switch (pdev->device) {
+	case 0x0005:
 		/* BIOS may have left us in UDMA, clear it before libata probe */
 		pci_write_config_byte(pdev, 0x54, 0);
-	else if (pdev->device == 0x0008 || pdev->device == 0x0009) {
-		u8 reg;
-
+		break;
+	case 0x0008:
+	case 0x0009:
 		/* Mac systems come up with some registers not set as we
 		   will need them */
 
@@ -338,6 +341,7 @@ static void atp8xx_fixup(struct pci_dev *pdev)
 		/* Enable IRQ output and burst mode */
 		pci_read_config_byte(pdev, 0x4a, &reg);
 		pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
+		break;
 	}
 }
 
-- 
2.26.3