From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Heiko Stuebner <heiko@sntech.de>
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Damien Le Moal <damien.lemoal@opensource.wdc.com>,
Serge Semin <fancer.lancer@gmail.com>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
linux-ide@vger.kernel.org, linux-phy@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sebastian Reichel <sebastian.reichel@collabora.com>,
kernel@collabora.com
Subject: [PATCH v2 6/6] arm64: dts: rockchip: rk3588: add SATA support
Date: Mon, 22 May 2023 19:34:23 +0200 [thread overview]
Message-ID: <20230522173423.64691-7-sebastian.reichel@collabora.com> (raw)
In-Reply-To: <20230522173423.64691-1-sebastian.reichel@collabora.com>
Add all three SATA IP blocks to the RK3588 DT.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
arch/arm64/boot/dts/rockchip/rk3588.dtsi | 23 +++++++++++
arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 48 +++++++++++++++++++++++
2 files changed, 71 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
index 9d8539b5309b..b9508cea34f1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
@@ -129,6 +129,29 @@ gmac0_mtl_tx_setup: tx-queues-config {
};
};
+ sata1: sata@fe220000 {
+ compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+ reg = <0 0xfe220000 0 0x1000>;
+ clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>,
+ <&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>,
+ <&cru CLK_PIPEPHY1_PIPE_ASIC_G>;
+ clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+ interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
+ ports-implemented = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata-port@0 {
+ reg = <0>;
+ hba-port-cap = <HBA_PORT_FBSCP>;
+ phys = <&combphy1_ps PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ snps,rx-ts-max = <32>;
+ snps,tx-ts-max = <32>;
+ };
+ };
+
combphy1_ps: phy@fee10000 {
compatible = "rockchip,rk3588-naneng-combphy";
reg = <0x0 0xfee10000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 45ae457a22a4..00a91b08e3bb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -9,6 +9,8 @@
#include <dt-bindings/power/rk3588-power.h>
#include <dt-bindings/reset/rockchip,rk3588-cru.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/ata/ahci.h>
/ {
compatible = "rockchip,rk3588";
@@ -1717,6 +1719,52 @@ gmac1_mtl_tx_setup: tx-queues-config {
};
};
+ sata0: sata@fe210000 {
+ compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+ reg = <0 0xfe210000 0 0x1000>;
+ clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
+ <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>,
+ <&cru CLK_PIPEPHY0_PIPE_ASIC_G>;
+ clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>;
+ ports-implemented = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata-port@0 {
+ reg = <0>;
+ hba-port-cap = <HBA_PORT_FBSCP>;
+ phys = <&combphy0_ps PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ snps,rx-ts-max = <32>;
+ snps,tx-ts-max = <32>;
+ };
+ };
+
+ sata2: sata@fe230000 {
+ compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+ reg = <0 0xfe230000 0 0x1000>;
+ clocks = <&cru ACLK_SATA2>, <&cru CLK_PMALIVE2>,
+ <&cru CLK_RXOOB2>, <&cru CLK_PIPEPHY2_REF>,
+ <&cru CLK_PIPEPHY2_PIPE_ASIC_G>;
+ clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+ interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>;
+ ports-implemented = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata-port@0 {
+ reg = <0>;
+ hba-port-cap = <HBA_PORT_FBSCP>;
+ phys = <&combphy2_psu PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ snps,rx-ts-max = <32>;
+ snps,tx-ts-max = <32>;
+ };
+ };
+
sdmmc: mmc@fe2c0000 {
compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe2c0000 0x0 0x4000>;
--
2.39.2
next prev parent reply other threads:[~2023-05-22 17:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-22 17:34 [PATCH v2 0/6] Add RK3588 SATA support Sebastian Reichel
2023-05-22 17:34 ` [PATCH v2 1/6] dt-bindings: soc: rockchip: add rk3588 pipe-phy syscon Sebastian Reichel
2023-05-22 17:34 ` [PATCH v2 2/6] dt-bindings: ata: ahci: add RK3588 AHCI controller Sebastian Reichel
2023-05-22 19:33 ` Conor Dooley
2023-06-04 18:58 ` Serge Semin
2023-05-22 17:34 ` [PATCH v2 3/6] dt-bindings: ata: ahci: dwc: enforce rockchip clocks Sebastian Reichel
2023-06-04 19:11 ` Serge Semin
2023-05-22 17:34 ` [PATCH v2 4/6] dt-bindings: phy: rockchip: rk3588 has two reset lines Sebastian Reichel
2023-05-22 19:24 ` Conor Dooley
2023-05-22 17:34 ` [PATCH v2 5/6] arm64: dts: rockchip: rk3588: add combo PHYs Sebastian Reichel
2023-05-22 17:34 ` Sebastian Reichel [this message]
2023-05-31 11:35 ` [PATCH v2 0/6] Add RK3588 SATA support Serge Semin
2023-06-06 17:07 ` (subset) " Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230522173423.64691-7-sebastian.reichel@collabora.com \
--to=sebastian.reichel@collabora.com \
--cc=damien.lemoal@opensource.wdc.com \
--cc=devicetree@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=heiko@sntech.de \
--cc=kernel@collabora.com \
--cc=kishon@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox