public inbox for linux-ide@vger.kernel.org
 help / color / mirror / Atom feed
From: Niklas Cassel <cassel@kernel.org>
To: Damien Le Moal <dlemoal@kernel.org>, Niklas Cassel <cassel@kernel.org>
Cc: Werner Fischer <devlists@wefi.net>,
	Daniel Drake <drake@endlessos.org>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Jian-Hong Pan <jhp@endlessos.org>,
	Dieter Mummenschanz <dmummenschanz@web.de>,
	linux-ide@vger.kernel.org
Subject: [PATCH 1/5] ata: ahci: move marking of external port earlier
Date: Thu,  1 Feb 2024 17:14:58 +0100	[thread overview]
Message-ID: <20240201161507.1147521-2-cassel@kernel.org> (raw)
In-Reply-To: <20240201161507.1147521-1-cassel@kernel.org>

Move the marking of an external port earlier in the call chain.
This is needed for further cleanups.
No functional change intended.

Signed-off-by: Niklas Cassel <cassel@kernel.org>
---
 drivers/ata/ahci.c    | 14 ++++++++++++++
 drivers/ata/libahci.c |  7 -------
 2 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index da2e74fce2d9..157ab88bdf75 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1642,6 +1642,17 @@ static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
 	return pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSIX);
 }
 
+static void ahci_mark_external_port(struct ata_port *ap)
+{
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 tmp;
+
+	tmp = readl(port_mmio + PORT_CMD);
+	if ((tmp & PORT_CMD_ESP) && (hpriv->cap & HOST_CAP_SXS))
+		ap->pflags |= ATA_PFLAG_EXTERNAL;
+}
+
 static void ahci_update_initial_lpm_policy(struct ata_port *ap,
 					   struct ahci_host_priv *hpriv)
 {
@@ -1934,6 +1945,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		if (ap->flags & ATA_FLAG_EM)
 			ap->em_message_type = hpriv->em_msg_type;
 
+		/* mark esata ports */
+		ahci_mark_external_port(ap);
+
 		ahci_update_initial_lpm_policy(ap, hpriv);
 
 		/* disabled/not-implemented port */
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 1a63200ea437..fca376f03c9e 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1280,10 +1280,8 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap,
 			   int port_no, void __iomem *mmio,
 			   void __iomem *port_mmio)
 {
-	struct ahci_host_priv *hpriv = ap->host->private_data;
 	const char *emsg = NULL;
 	int rc;
-	u32 tmp;
 
 	/* make sure port is not active */
 	rc = ahci_deinit_port(ap, &emsg);
@@ -1291,11 +1289,6 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap,
 		dev_warn(dev, "%s (%d)\n", emsg, rc);
 
 	ahci_port_clear_pending_irq(ap);
-
-	/* mark esata ports */
-	tmp = readl(port_mmio + PORT_CMD);
-	if ((tmp & PORT_CMD_ESP) && (hpriv->cap & HOST_CAP_SXS))
-		ap->pflags |= ATA_PFLAG_EXTERNAL;
 }
 
 void ahci_init_controller(struct ata_host *host)
-- 
2.43.0


  reply	other threads:[~2024-02-01 16:15 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-01 16:14 [PATCH 0/5] drop low power policy board type Niklas Cassel
2024-02-01 16:14 ` Niklas Cassel [this message]
2024-02-02  1:52   ` [PATCH 1/5] ata: ahci: move marking of external port earlier Damien Le Moal
2024-02-01 16:14 ` [PATCH 2/5] ata: ahci: a hotplug capable port is an external port Niklas Cassel
2024-02-02  1:54   ` Damien Le Moal
2024-02-01 16:15 ` [PATCH 3/5] ata: ahci: drop hpriv param from ahci_update_initial_lpm_policy() Niklas Cassel
2024-02-02  1:57   ` Damien Le Moal
2024-02-01 16:15 ` [PATCH 4/5] ata: ahci: do not enable LPM on external ports Niklas Cassel
2024-02-02  2:09   ` Damien Le Moal
2024-02-01 16:15 ` [PATCH 5/5] ata: ahci: Drop low power policy board type Niklas Cassel
2024-02-02  2:12   ` Damien Le Moal
2024-02-02  2:13 ` [PATCH 0/5] drop " Damien Le Moal
2024-02-02 13:13 ` Werner Fischer
2024-02-02 15:12   ` Mario Limonciello

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240201161507.1147521-2-cassel@kernel.org \
    --to=cassel@kernel.org \
    --cc=devlists@wefi.net \
    --cc=dlemoal@kernel.org \
    --cc=dmummenschanz@web.de \
    --cc=drake@endlessos.org \
    --cc=jhp@endlessos.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox