[PATCH] ahci: Introduce ahci_ignore_port() helper

[Damien Le Moal <dlemoal@kernel.org>]

libahci and AHCI drivers may ignore some ports if the port is invalid
(its ID does not correspond to a valid physical port) or if the user
explicitly requested the port to be ignored with the mask_port_map
ahci module parameter. Such port that shall be ignored can be identified
by checking that the bit corresponding to the port ID is not set in the
mask_port_map field of struct ahci_host_priv. E.g. code such as:
"if (!(hpriv->mask_port_map & (1 << portid)))".

Replace all direct use of the mask_port_map field to detect such port
with the new helper inline function ahci_ignore_port() to make the code
more readable/easier to understand.

The comment describing the mask_port_map field of struct ahci_host_priv
is also updated to be more accurate.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
---
 drivers/ata/ahci.h             | 13 ++++++++++++-
 drivers/ata/ahci_brcm.c        |  2 +-
 drivers/ata/ahci_ceva.c        |  4 ++--
 drivers/ata/libahci_platform.c |  6 +++---
 4 files changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 8f40f75ba08c..aea30df50c58 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -328,7 +328,7 @@ struct ahci_port_priv {
 struct ahci_host_priv {
 	/* Input fields */
 	unsigned int		flags;		/* AHCI_HFLAG_* */
-	u32			mask_port_map;	/* mask out particular bits */
+	u32			mask_port_map;	/* Mask of valid ports */
 
 	void __iomem *		mmio;		/* bus-independent mem map */
 	u32			cap;		/* cap to use */
@@ -379,6 +379,17 @@ struct ahci_host_priv {
 						  int port);
 };
 
+/*
+ * Return true if a port should be ignored because it is excluded from
+ * the host port map.
+ */
+static inline bool ahci_ignore_port(struct ahci_host_priv *hpriv,
+				    unsigned int portid)
+{
+	return portid >= hpriv->nports ||
+		!(hpriv->mask_port_map & (1 << portid));
+}
+
 extern int ahci_ignore_sss;
 
 extern const struct attribute_group *ahci_shost_groups[];
diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 24c471b485ab..29be74fedcf0 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -288,7 +288,7 @@ static unsigned int brcm_ahci_read_id(struct ata_device *dev,
 
 	/* Re-initialize and calibrate the PHY */
 	for (i = 0; i < hpriv->nports; i++) {
-		if (!(hpriv->mask_port_map & (1 << i)))
+		if (ahci_ignore_port(hpriv, i))
 			continue;
 
 		rc = phy_init(hpriv->phys[i]);
diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c
index f2e20ed11ec7..2d6a08c23d6a 100644
--- a/drivers/ata/ahci_ceva.c
+++ b/drivers/ata/ahci_ceva.c
@@ -206,7 +206,7 @@ static int ceva_ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
 		goto disable_clks;
 
 	for (i = 0; i < hpriv->nports; i++) {
-		if (!(hpriv->mask_port_map & (1 << i)))
+		if (ahci_ignore_port(hpriv, i))
 			continue;
 
 		rc = phy_init(hpriv->phys[i]);
@@ -218,7 +218,7 @@ static int ceva_ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
 	ahci_platform_deassert_rsts(hpriv);
 
 	for (i = 0; i < hpriv->nports; i++) {
-		if (!(hpriv->mask_port_map & (1 << i)))
+		if (ahci_ignore_port(hpriv, i))
 			continue;
 
 		rc = phy_power_on(hpriv->phys[i]);
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index b68777841f7a..53b2c7719dc5 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -49,7 +49,7 @@ int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
 	int rc, i;
 
 	for (i = 0; i < hpriv->nports; i++) {
-		if (!(hpriv->mask_port_map & (1 << i)))
+		if (ahci_ignore_port(hpriv, i))
 			continue;
 
 		rc = phy_init(hpriv->phys[i]);
@@ -73,7 +73,7 @@ int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
 
 disable_phys:
 	while (--i >= 0) {
-		if (!(hpriv->mask_port_map & (1 << i)))
+		if (ahci_ignore_port(hpriv, i))
 			continue;
 
 		phy_power_off(hpriv->phys[i]);
@@ -94,7 +94,7 @@ void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
 	int i;
 
 	for (i = 0; i < hpriv->nports; i++) {
-		if (!(hpriv->mask_port_map & (1 << i)))
+		if (ahci_ignore_port(hpriv, i))
 			continue;
 
 		phy_power_off(hpriv->phys[i]);
-- 
2.47.1