* [GIT PULL] ata changes for 6.17-rc1
@ 2025-07-28 6:06 Damien Le Moal
2025-07-29 0:12 ` pr-tracker-bot
0 siblings, 1 reply; 2+ messages in thread
From: Damien Le Moal @ 2025-07-28 6:06 UTC (permalink / raw)
To: Linus Torvalds, linux-ide; +Cc: Niklas Cassel
Linus,
The following changes since commit d0b3b7b22dfa1f4b515fd3a295b3fd958f9e81af:
Linux 6.16-rc4 (2025-06-29 13:09:04 -0700)
are available in the Git repository at:
ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/libata/linux tags/ata-6.17-rc1
for you to fetch changes up to 546527b92d7e72dcd827675a2d3e580002b09cc1:
Documentation: driver-api: Update libata error handler information (2025-07-16 09:31:43 +0200)
----------------------------------------------------------------
ata changes for 6.17-rc1
- Replace the ATA_DFLAG_ZAC device flag with the helper function
ata_dev_is_zac() testing directly the device class and device zoned
mode (me).
- Some small cleanup of ata_scsi_offline_dev() code (me).
- Improve the description of the link power management (LPM) policies
in Kconfig and in the comments defining these. Together with this,
clarify the description of the ahci driver mobile_lpm_policy module
parameter (me).
- Various code refactoring of libata LPM handling (ata_eh_set_lpm()
renaming, introduce ata_dev_config_lpm(), LPM related quirk handling,
and LPM related feature advertizing on device scan) (me).
- Avoid unnecessary device reset when revalidating after an error when
LPM is used (me).
- Do not allow setting a port/link LPM policy if LPM is not supported,
either because the controller does not support partial, slumber nor
devsleep, or when the port is an external port with hotplug
capability (me).
- Make sure that device initiated power management (DIPM) is not
enabled if the host (controller) lacks support for this feature (me).
- Improve messages and debug messages related to LPM, in particular,
reduce the number of messages signaling the lack of LPM support (me).
- Cache in memory a device general purpose log directory to avoid
having to access this log for every log page access. The intent here
is to reduce the number of read log commands when scanning or
revalidating a device (me).
- Change ata_dev_cleanup_cdl_resources() to be a static function (me).
- Rename and simplify the mode setting functions (me).
- Introduce the helper function ata_port_eh_scheduled() to check if EH
is pending or running for a port (me)
- Improve ata_eh_set_pending() (return bool instead of int) (me).
- Use sysfs_emit() instead of scnprintf() for libata-transport
attributes (Jonathan).
- Use the existing macro definiton of RDC vendor ID instead of
hardcoding it in the pata_rdc driver (Andy).
- Rework how EH is called for a port to avoid needing to pass along the
prereset, softreset, hardreset and postreset operations. The
driver API documentation for this is also updated (me).
----------------------------------------------------------------
Andy Shevchenko (1):
ata: pata_rdc: Use registered definition for the RDC vendor
Damien Le Moal (26):
ata: libata: Remove ATA_DFLAG_ZAC device flag
ata: libata-scsi: Cleanup ata_scsi_offline_dev()
ata: Fix SATA_MOBILE_LPM_POLICY description in Kconfig
ata: libata: Improve LPM policies description
ata: ahci: Clarify mobile_lpm_policy description
ata: libata-eh: Move and rename ata_eh_set_lpm()
ata: libata-core: Introduce ata_dev_config_lpm()
ata: libata-core: Move device LPM quirk settings to ata_dev_config_lpm()
ata: libata-core: Advertize device support for DIPM and HIPM features
ata: libata-eh: Avoid unnecessary resets when revalidating devices
ata: libata-sata: Disallow changing LPM state if not supported
ata: ahci: Disable DIPM if host lacks support
ata: ahci: Disallow LPM policy control for external ports
ata: ahci: Disallow LPM policy control if not supported
ata: libata-core: Reduce the number of messages signaling broken LPM
ata: libata_eh: Add debug messages to ata_eh_link_set_lpm()
ata: libata-core: Cache the general purpose log directory
ata: libata-core: Make ata_dev_cleanup_cdl_resources() static
ata: libata-eh: Rename and make ata_set_mode() static
ata: libata-core: Rename ata_do_set_mode()
ata: libata: Introduce ata_port_eh_scheduled()
ata: libata-eh: use bool for fastdrain in ata_eh_set_pending()
ata: libata-eh: Make ata_eh_followup_srst_needed() return a bool
ata: libata-eh: Remove ata_do_eh()
ata: libata-eh: Simplify reset operation management
Documentation: driver-api: Update libata error handler information
Jonathan Velez (1):
ata: libata-transport: replace scnprintf with sysfs_emit for simple attributes
Documentation/driver-api/libata.rst | 25 +-
drivers/ata/Kconfig | 36 ++-
drivers/ata/ahci.c | 25 +-
drivers/ata/ahci_da850.c | 6 +-
drivers/ata/ahci_dm816.c | 2 +-
drivers/ata/ahci_imx.c | 13 +-
drivers/ata/ahci_qoriq.c | 4 +-
drivers/ata/ahci_xgene.c | 8 +-
drivers/ata/ata_piix.c | 4 +-
drivers/ata/libahci.c | 10 +-
drivers/ata/libata-core.c | 137 +++++++---
drivers/ata/libata-eh.c | 433 ++++++++++++++++----------------
drivers/ata/libata-pmp.c | 26 +-
drivers/ata/libata-sata.c | 7 +-
drivers/ata/libata-scsi.c | 25 +-
drivers/ata/libata-sff.c | 18 +-
drivers/ata/libata-transport.c | 4 +-
drivers/ata/libata.h | 24 +-
drivers/ata/pata_acpi.c | 2 +-
drivers/ata/pata_ali.c | 10 +-
drivers/ata/pata_amd.c | 4 +-
drivers/ata/pata_artop.c | 4 +-
drivers/ata/pata_atiixp.c | 2 +-
drivers/ata/pata_efar.c | 2 +-
drivers/ata/pata_ep93xx.c | 4 +-
drivers/ata/pata_hpt366.c | 2 +-
drivers/ata/pata_hpt37x.c | 4 +-
drivers/ata/pata_hpt3x2n.c | 2 +-
drivers/ata/pata_icside.c | 2 +-
drivers/ata/pata_it8213.c | 2 +-
drivers/ata/pata_jmicron.c | 2 +-
drivers/ata/pata_marvell.c | 2 +-
drivers/ata/pata_mpiix.c | 2 +-
drivers/ata/pata_ns87410.c | 2 +-
drivers/ata/pata_octeon_cf.c | 2 +-
drivers/ata/pata_oldpiix.c | 2 +-
drivers/ata/pata_opti.c | 2 +-
drivers/ata/pata_optidma.c | 6 +-
drivers/ata/pata_parport/pata_parport.c | 4 +-
drivers/ata/pata_pcmcia.c | 4 +-
drivers/ata/pata_pdc2027x.c | 4 +-
drivers/ata/pata_rdc.c | 6 +-
drivers/ata/pata_sis.c | 2 +-
drivers/ata/pata_sl82c105.c | 2 +-
drivers/ata/pata_triflex.c | 2 +-
drivers/ata/pata_via.c | 2 +-
drivers/ata/pdc_adma.c | 2 +-
drivers/ata/sata_dwc_460ex.c | 2 +-
drivers/ata/sata_fsl.c | 6 +-
drivers/ata/sata_highbank.c | 2 +-
drivers/ata/sata_inic162x.c | 2 +-
drivers/ata/sata_mv.c | 10 +-
drivers/ata/sata_nv.c | 2 +-
drivers/ata/sata_promise.c | 4 +-
drivers/ata/sata_qstor.c | 4 +-
drivers/ata/sata_rcar.c | 2 +-
drivers/ata/sata_sil.c | 2 +-
drivers/ata/sata_sil24.c | 8 +-
drivers/ata/sata_svw.c | 4 +-
drivers/ata/sata_sx4.c | 2 +-
drivers/ata/sata_uli.c | 2 +-
drivers/ata/sata_via.c | 4 +-
drivers/scsi/libsas/sas_ata.c | 4 +-
include/linux/libata.h | 54 ++--
64 files changed, 565 insertions(+), 444 deletions(-)
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] ata changes for 6.17-rc1
2025-07-28 6:06 [GIT PULL] ata changes for 6.17-rc1 Damien Le Moal
@ 2025-07-29 0:12 ` pr-tracker-bot
0 siblings, 0 replies; 2+ messages in thread
From: pr-tracker-bot @ 2025-07-29 0:12 UTC (permalink / raw)
To: Damien Le Moal; +Cc: Linus Torvalds, linux-ide, Niklas Cassel
The pull request you sent on Mon, 28 Jul 2025 15:06:23 +0900:
> ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/libata/linux tags/ata-6.17-rc1
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/ced1b9e0392d981a7317c605b402c06650947a34
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/prtracker.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-07-29 0:12 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-07-28 6:06 [GIT PULL] ata changes for 6.17-rc1 Damien Le Moal
2025-07-29 0:12 ` pr-tracker-bot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox